While using "definitely-not-virtio" as a model name is very
cute, it will also cause the relevant test to fail once we
introduce stricter validation.
Use "e1000", which is definitely not virtio but also a valid
model name, instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This patch addresses the same aspects on PPC the bug 1103314 addressed
on x86.
PCI expander bus creates multiple primary PCI busses, where each of these
busses can be assigned a specific NUMA affinity, which, on x86 is
advertised through ACPI on a per-bus basis.
For SPAPR, a PHB's NUMA affinities are assigned on a per-PHB basis, and
there is no mechanism for advertising NUMA affinities to a guest on a
per-bus basis. So, even if qemu-ppc manages to get some sort of multi-bus
topology working using PXB, there is no way to expose the affinities
of these busses to the guest. It can only be exposed on a per-PHB/per-domain
basis.
So patch enables NUMA node tag in pci-root controller on PPC.
The way to set the NUMA node is through the numa_node option of
spapr-pci-host-bridge device. However for the implicit PHB, the only way
to set the numa_node is from the -global option. The -global option applies
to all the PHBs unless explicitly specified with the option on the
respective PHB of CLI. The default PHB has the emulated devices only, so
the patch prevents setting the NUMA node for the default PHB.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
All the pieces are now in place, so we can finally start
using isolation groups to achieve our initial goal, which is
separating hostdevs from emulated PCI devices while keeping
hostdevs that belong to the same host IOMMU group together.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1280542
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
When looking for slots suitable for a PCI device, libvirt
might need to add an extra PCI controller: for pSeries guests,
we want that extra controller to be a PHB (pci-root) rather
than a PCI bridge.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
PCI bus has to be numbered sequentially, and no index can be
missing, so libvirt will fill in the blanks automatically for
the user.
Up until now, it has done so using either pci-bridge, for machine
types based on legacy PCI, or pcie-root-port, for machine types
based on PCI Express. Neither choice is good for pSeries guests,
where PHBs (pci-root) should be used instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
These tests demonstrate that, while it's now possible for the
user to create PHB explicitly and manually assign devices to
them, libvirt still defaults to extending the guest PCI
topology using PCI bridges and making suboptimal device
placement choices.
The next few commits will improve on these behaviors and the
tests outputs will automatically be updated to reflect this.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
pSeries guests will soon need the new information; luckily,
we can figure it out automatically most of the time, so
users won't have to worry about it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Fill them in right away rather than having to figure out at runtime
whether they are necessary or not.
virStorageSourceNetworkDefaultPort does not need to be exported any
more.
Several cases have incidental <serial> or <console> XML which aren't
the features being tested for. Upcoming changes will cause some
churn here, so instead drop these bits now.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This demonstrates that the previous qemu caps changes will use
-chardev for pci-serial on aarch64 machvirt
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Update the per device boot schema to add an optional loadparm parameter.
eg: <boot order='1' loadparm='2'/>
Extend the virDomainDeviceInfo to support loadparm option.
Modify the appropriate functions to parse loadparm from boot device xml.
Add the xml2xml test to validate the field.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1214369
Consider the following XML:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='1'/>
</hugepages>
<source type='file'/>
<access mode='shared'/>
</memoryBacking>
<numa>
<cell id='0' cpus='0-3' memory='512000' unit='KiB'/>
<cell id='1' cpus='4-7' memory='512000' unit='KiB'/>
</numa>
The following cmd line is generated:
-object
memory-backend-file,id=ram-node0,mem-path=/var/lib/libvirt/qemu/ram,
share=yes,size=524288000 -numa node,nodeid=0,cpus=0-3,memdev=ram-node0
-object
memory-backend-file,id=ram-node1,mem-path=/var/lib/libvirt/qemu/ram,
share=yes,size=524288000 -numa node,nodeid=1,cpus=4-7,memdev=ram-node1
This is obviously wrong as for node 1 hugepages should have been
used. The hugepages configuration is more specific than <source
type='file'/>.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have couple of hugepage enabled domains for qemuxml2argvtest.
Unfortunately, often when adding a test case there I forget to
add it to xml2xml test too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1459091
Currently, we are querying for vhostuser interface name in post
parse callback. At that time interface might not yet exist.
However, it has to exist when starting domain. Therefore it makes
more sense to query its name at that point. This partially
reverts 57b5e27.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Make the decision based on the usage of childBuf buffer.
This fixes the oddity in the test case introduced by commit c1c4d0d
where we would format an empty pair tag.
There are currently some limitations in the emulated GICv3
that make it unsuitable as a default. Use GICv2 instead.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1450433
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Currently we consider all UNIX paths with specific prefix as generated
by libvirt, but that's a wrong assumption. Let's make the detection
better by actually checking whether the whole path matches one of the
paths that we generate or generated in the past.
The UNIX path isn't stored in config XML since libvirt-1.3.1.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1446980
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add a new <ioapic> element with a driver attribute.
Possible values are qemu and kvm. With 'qemu', the I/O
APIC can be put in the userspace even for KVM domains.
https://bugzilla.redhat.com/show_bug.cgi?id=1427005
We are currently parsing only rx/frames/max because that's the only
value that makes sense for us. The tun device just added support for
this one and the others are only supported by hardware devices which
we don't need to worry about as the only way we'd pass those to the
domain is using <hostdev/> or <interface type='hostdev'/>. And in
those cases the guest can modify the settings itself.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Our test data used a lot of different qemu binary paths and some
of them were based on downstream systems.
Note that there is one file where I had to add "accel=kvm" because
the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The virt type for QEMU can be modified by -machine attribute "accel"
so there is no need to have different QEMU binary paths.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Depending on the architecture, requirements for ACPI and UEFI can
be different; more specifically, while on x86 UEFI requires ACPI,
on aarch64 it's the other way around.
Enforce these requirements when validating the domain, and make
the error message more accurate by mentioning that they're not
necessarily applicable to all architectures.
Several aarch64 test cases had to be tweaked because they would
have failed the validation step otherwise.
We want pcie-root-ports to be used when available in QEMU,
but at the same time we need to ensure that hosts running
older QEMU releases keep working and that the user can
override the default at any time.
Add a comment for the original pcie-root-port test cases
to make it clear how these new test cases are different.
For NVDIMM devices it is optionally possible to specify the size
of internal storage for namespaces. Namespaces are a feature that
allows users to partition the NVDIMM for different uses.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that NVDIMM has found its way into libvirt, users might want
to fine tune some settings for each module separately. One such
setting is 'share=on|off' for the memory-backend-file object.
This setting - just like its name suggest already - enables
sharing the nvdimm module with other applications. Under the hood
it controls whether qemu mmaps() the file as MAP_PRIVATE or
MAP_SHARED.
Yet again, we have such config knob in domain XML, but it's just
an attribute to numa <cell/>. This does not give fine enough
tuning on per-memdevice basis so we need to have the attribute
for each device too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
NVDIMM is new type of memory introduced into QEMU 2.6. The idea
is that we have a Non-Volatile memory module that keeps the data
persistent across domain reboots.
At the domain XML level, we already have some representation of
'dimm' modules. Long story short, NVDIMM will utilize the
existing <memory/> element that lives under <devices/> by adding
a new attribute 'nvdimm' to the existing @model and introduce a
new <path/> element for <source/> while reusing other fields. The
resulting XML would appear as:
<memory model='nvdimm'>
<source>
<path>/tmp/nvdimm</path>
</source>
<target>
<size unit='KiB'>523264</size>
<node>0</node>
</target>
<address type='dimm' slot='0'/>
</memory>
So far, this is just a XML parser/formatter extension. QEMU
driver implementation is in the next commit.
For more info on NVDIMM visit the following web page:
http://pmem.io/
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Up until a while ago, libvirt would automatically add a legacy
PCI controllers combo (dmi-to-pci-bridge + pci-bridge) to any
PCIe machine type (x86_64/q35 and aarch64/virt).
As a result, a number of input and output files in the test
suite ended up containing the legacy PCI controllers, even
though they are not needed or in any way relevant to the
feature being tested.
Get rid of most of the occurrences. Most of the time, this
just means removing the controllers from the input file and
regenerating the output files; in a few instances, some
minor tweaking is performed on the input file, most notably
removing the memory balloon: as memory balloon support was
not the scope of the test being changed, there is no loss
of test coverage from doing so.
Several occurrences of the legacy PCI controllers remain in
the test suite, both because removing their usage would have
required even more tweaking, and because we still want to
have coverage of this perfectly valid combination.
Add a new attribute 'rendernode' to <gl> spice element.
Give it to QEMU if qemu supports it (queued for 2.9).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This part introduces new xml elements for file based
memorybacking support and their parsing.
(It allows vhost-user to be used without hugepages.)
New xml elements:
<memoryBacking>
<source type="file|anonymous"/>
<access mode="shared|private"/>
<allocation mode="immediate|ondemand"/>
</memoryBacking>
Not only we should set the MTU on the host end of the device but
also let qemu know what MTU did we set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Based on work of Mehdi Abaakouk <sileht@sileht.net>.
When parsing vhost-user interface XML and no ifname is found we
can try to fill it in in post parse callback. The way this works
is we try to make up interface name from given socket path and
then ask openvswitch whether it knows the interface.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so
that they will be assigned to all the functions on a slot.
Some qemu test case outputs had to be adjusted due to the
pcie-root-ports now being put on multiple functions.
If there are multiple devices assigned to the different functions of a
single PCI slot, they will not work properly if the device at function
0 doesn't have its "multi" attribute turned on, so it makes sense for
libvirt to turn it on during PCI address assignment. Setting multi
then assures that the new setting is stored in the config (so it will
be used next time the domain is started), preventing any potential
problems in the case that a future change in the configuration
eliminates the devices on all non-0 functions (multi will still be set
for function 0 even though it is the only function in use on the slot,
which has no useful purpose, but also doesn't cause any problems).
(NB: If we were to instead just decide on the setting for
multifunction at runtime, a later removal of the non-0 functions of a
slot would result in a silent change in the guest ABI for the
remaining device on function 0 (although it may seem like an
inconsequential guest ABI change, it *is* a guest ABI change to turn
off the multi bit).)
virtio-pci is the way forward for aarch64 guests: it's faster
and less alien to people coming from other architectures.
Now that guest support is finally getting there (Fedora 24,
CentOS 7.3, Ubuntu 16.04 and Debian testing all support
virtio-pci out of the box), we'd like to start using it by
default instead of virtio-mmio.
Users and applications can already opt-in by explicitly using
<address type='pci'/>
inside the relevant elements, but that's kind of cumbersome and
requires all users and management applications to adapt, which
we'd really like to avoid.
What we can do instead is use virtio-mmio only if the guest
already has at least one virtio-mmio device, and use virtio-pci
in all other situations.
That means existing virtio-mmio guests will keep using the old
addressing scheme, and new guests will automatically be created
using virtio-pci instead. Users can still override the default
in either direction.
Existing tests such as aarch64-aavmf-virtio-mmio and
aarch64-virtio-pci-default already cover all possible
scenarios, so no additions to the test suites are necessary.
Since the great rework of how we store vcpu- and iothread-related
data, we have overly complex part of code that is trying to format the
scheduler tuning data in as less lines as possible by grouping
settings for multiple threads. That was designed as an input syntax
sugar for users, but we don't need to also use that when formatting
the XML. Switching to simple enumeration makes the code nicer,
shorter and more welcoming to future changes.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Modify _virDomainBlockIoTuneInfo and rng schema to support the group_name
option for iotune throttling. Document the new value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Don't use duplicate disk addresses in test cases unless it's useful. At
least the test case will break once we have a check for uniqueness of
addresses at time of domain definition.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
With the QEMU components in place, provide the XML parsing to
invoke that code when given the following XML snippet:
<hostdev mode='subsystem' type='scsi_host'>
<source protocol='vhost' wwpn='naa.501234567890abcd'/>
</hostdev>
An optional address element can be specified within the hostdev
(pick CCW or PCI as necessary):
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0625'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
Add basic vhost-scsi tests which were cloned from hostdev-scsi-virtio-scsi
in both xml2argv and xml2xml. Added ones for both vhost-scsi-ccw and
vhost-scsi-pci since the syntaxes are slightly different between them.
Also adjusted the docs to describe the changes.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
