By using the new qemu monitor functions to handle passing and removing
file descriptors, we can support hotplug of vdpa devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
add-fd, remove-fd, and query-fdsets provide functionality that can be
used for passing fds to qemu and closing fdsets that are no longer
necessary.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Enable <interface type='vdpa'> for qemu domains. This provides basic
support and does not support hotplug or migration.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Recent versions of qemu added the -netdev vhost-vdpa device. This
capability allows libvirt to know whether this is supported.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This patch adds new schema and adds support for parsing and formatting
domain configurations that include vdpa devices.
vDPA network devices allow high-performance networking in a virtual
machine by providing a wire-speed data path. These devices require a
vendor-specific host driver but the data path follows the virtio
specification.
When a device on the host is bound to an appropriate vendor-specific
driver, it will create a chardev on the host at e.g. /dev/vhost-vdpa-0.
That chardev path can then be used to define a new interface with
type='vdpa'.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
My code movement changed the type of ifaces_ret from
virDomainInterfacePtr * to virDomainInterfacePtr **,
but failed to adjust the condition or dereference the
array correctly.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 6ddb1f803e
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
SCSI hostdev setup requires querying the host os for the actual path of
the configured hostdev. This was historically done in the command line
formatter. Our new approach is to split out this part into
'qemuProcessPrepareHost' which is designed to be skipped in tests.
Refactor the hostdev code to use this new semantics, and add appropriate
handlers filling in the data for tests and the qemuConnectDomainXMLToNative
users.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuBuildHostdevSCSIAttachPrepare is supposed to prepare the data
structure used for attaching the hostdev not preparing the hostdev
definition itself. Move the corresponding bits to qemuDomainPrepareHostdev
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Host preparation steps which are deliberately skipped when
pretend-creating a commandline are normally executed after VM object
preparation. In the test code we are faking some of the host
preparation steps, but we were doing that prior to the call to
qemuProcessPrepareDomain embedded in qemuProcessCreatePretendCmd.
By splitting up qemuProcessCreatePretendCmd into two functions we can
ensure that the ordering of the prepare steps stays consistent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's not necessarily clear, why we need to create the hash table
as big as number of fields we want to store, but nevertheless,
the code can be written a bit better. The @count should be type
of size_t and could be used directly in the loop that counts the
fields.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
The hypervSetEmbeddedProperty() function is used to update a
value for given property in a list of properties created by
hypervCreateEmbeddedParam(). The list is nothing fancy - it's a
virHashTable that has NULL as dataFree callback => the table does
not own the value. This is not that obvious since
hypervSetEmbeddedProperty() accepts a non-const pointer. This
fact makes it unnecessary hard to consume, e.g. if we wanted to
pass a stack allocated string.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Switch to the new QMP command once it becomes available. Since the code
was refactored to have just one central location to do this we can
contain the ugly bits to just this one function.
Since we now use the replacement for 'nbd-server-add' mark the test case
as being OK with removal of the command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the monitor code, corresponding generator of properties for NBD and
tests validating it against the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'block-export-add' QMP command is a replacement for 'nbd-server-add'
and will allow greater flexibility. Add a capability so that we can
switch to it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Centralize the logic deciding which arguments to use when exporting a
block backend via NBD to a single place so that it can be centrally
fixed in upcoming commits to support the new export method via
'block-export-add'.
Additionally this allows simplification of the caller from migration as
the logic deciding which arguments to use is extracted too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the proper video device type when parsing bhyve's commandline into a
XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Now, that ownership transfer of hypervSetEmbeddedProperty() is
clear, we can use automatic freeing of the hash table.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Upon successful return hypervAddEmbeddedParam() transfers
ownership of @table argument to @params. But because it takes
only simple pointer (which hides this ownership transfer) it
doesn't clear the @table pointer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Now, that hypervInvokeMethod() clears the passed pointer we don't
need a special cleanup label ('params_cleanup') that handles
non-obvious ownership transfer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Upon invocation, hypervInvokeMethod() consumes passed @params
(the second argument) regardless whether success or failure is
released. However, it takes only simple pointer (which hides this
ownership transfer) and because of that it doesn't clear it.
Switch to double pointer and tweak the documentation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
These XML attributes have been mandatory since the introduction of SEV
support to libvirt. This design decision was based on QEMU's
requirement for these to be mandatory for migration purposes, as
differences in these values across platforms must result in the
pre-migration checks failing (not that migration with SEV works at the
time of this patch).
Expecting the user to specify these is cumbersome and the same XML
cannot be re-used across different revisions of SEV. Since
we have SEV platform information saved in QEMU capabilities, we can
make the attributes optional and should fill them in automatically
in the QEMU driver right before starting it.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/57
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These XML attributes have been mandatory since the introduction of SEV
support to libvirt. This design decision was based on QEMU's
requirement for these to be mandatory for migration purposes, as
differences in these values across platforms must result in the
pre-migration checks failing (not that migration with SEV works at the
time of this patch).
This patch enables autofill of these attributes right before launching
QEMU and thus updating the live XML.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Checks such as this one should be done at domain def validation time,
not before starting the QEMU process.
As for this change, existing domains will see some QEMU error when
starting as opposed to a libvirt error that this QEMU binary doesn't
support SEV, but that's okay, we never guaranteed error messages to
remain the same.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rename the function to qemuValidateDomainVCpuTopology() to reflect
what it is currently doing as well.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All but VIR_CPU_MODE_HOST_MODEL were moved. 'host_model' mode
has nuances that forbid the verification to be moved to parse
time.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We have a lot of "if (usingVirtio)" checks being done while
constructing the NIC command line. Let's put all of them in
a single "if".
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A few tweaks were made during the move:
- the error messages were changed to mention 'sata controller'
instead of 'ide controller';
- a check for address type 'drive' was added like it is done
with other bus types. The error message of qemuxml2argdata was
updated to reflect that now, instead of erroring it out from the
common code in virDomainDiskDefValidate(), we're failing earlier
with a different error message.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In fee8a61d29 a new attribute to <memballoon/> was introduced:
free-page-reporting. We don't really like hyphens in attribute
names. Use camelCase instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Always reverse-engineering VMX files, attempt to support SATA disks in
guests, and their controllers.
The esx-in-the-wild-10 test case is taken from RHBZ#1883588, while the
result of esx-in-the-wild-8 is updated with SATA disks.
Fixes (hopefully):
https://bugzilla.redhat.com/show_bug.cgi?id=1677608https://bugzilla.redhat.com/show_bug.cgi?id=1883588
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Account for the possible SATA disks too, which means 120 potential
disks.
This means the size of the array triples, however that is unavoidable
with the current way of reading disks.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add it to the list of 'deviceType' values ignored for disks.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move all the private helpers for parsing and formatting of domain
elements as private static functions in vmx.c, to avoid using them
directly.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These variables seem to be left over from a previous refactoring and
they don't add anything to the code.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
...if a machine memory-backend using shared memory is configured for
the guest. This is especially important for QEMU machine types that
don't have NUMA but virtiofs support.
An example snippet:
<domain type='kvm'>
<name>test</name>
<memory unit='KiB'>2097152</memory>
<memoryBacking>
<access mode='shared'/>
</memoryBacking>
<devices>
<filesystem type='mount' accessmode='passthrough'>
<driver type='virtiofs'/>
<source dir='/tmp/test'/>
<target dir='coffee'/>
</filesystem>
...
</devices>
...
</domain>
and the corresponding QEMU command line:
/usr/bin/qemu-system-s390x \
-machine s390-ccw-virtio-5.2,memory-backend=s390.ram \
-m 2048 \
-object
memory-backend-file,id=s390.ram,mem-path=/var/lib/libvirt/qemu/ram/46-test/s390.ram,share=yes,size=2147483648 \
...
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch enables the free-page-reporting in qemu.
Signed-off-by: Nico Pache <npache@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch will introduce the free-page-reporting feature capabilities
that are in qemu 5.1
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This will add the proper documentation and parser support for the free page
reporting feature that is introduced in QEMU 5.1.
Signed-off-by: Nico Pache <npache@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
By default, pfifo_fast queueing discipline (qdisc) is set on
newly created interfaces (including TAPs). This qdisc has three
queues and packets that want to be sent through given NIC are
placed into one of the queues based on TOS field. Queues are then
emptied based on their priority allowing interactive sessions
stay interactive whilst something else is downloading a large
file.
Obviously, this means that kernel has to be involved and some
locking has to happen (when placing packets into queues). If
virtualization is taken into account then the above algorithm
happens twice - once in the guest and the second time in the
host.
This is arguably not optimal as it burns host CPU cycles
needlessly. Guest already made it choice and sent packets in the
order it wants.
To resolve this, Linux kernel offers 'noqueue' qdisc which can be
applied on virtual interfaces and in fact for 'lo' it is by
default:
lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue
Set it for other TAP devices we create for domains too. With this
change I was able to squeeze 1Mbps more from a macvtap attached
to a guest and to my 1Gbps LAN (as measured by iperf3).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329644
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This helper changes the root qdisc on given interface.
Ideally, it would be written using netlink but my attempts to
write the code were not successful and thus I've fallen back to
virCommand() + tc.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Currently setting max_len=0 causes virtlogd to spin in a busy loop. It
is natural to allow this to disable log rollover which can be useful for
developers debugging things.
Note disabling rollover exposes the host to denial of service from a
malicious guest, so must be used with care.
Closes https://gitlab.com/libvirt/libvirt/-/issues/85
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Fixes commit <d5b05614dfbc9bd60ea1a31a9cc32aaf3c771ddc> which changed
allocation from VIR_ALLOC_N to g_new0 but missed one +1 on number of
allocated elements.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Fixes commit <a5d88ffe0ad9b5d5314ab0058c5b363f9f79b8ee> which changed
allocation from VIR_ALLOC_N to g_new0 but missed some +1 on number of
allocated elements.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
If storage migration is requested, and the destination storage does
not exist on the remote host, qemu's migration support will call
into the libvirt storage driver to precreate the destination storage.
The storage driver virConnectPtr is opened too early though, adding
an unnecessary dependency on the storage driver for several cases
that don't require it. This currently requires kubevirt to install
the storage driver even though they aren't actually using it.
Push the virGetConnectStorage calls to right before the cases they are
actually needed.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
For the virtio-9p bhyve command line argument, the proper order
is mount_tag=/path/to/host/dir, not the opposite.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The aim of virSocketAddrPrefixToNetmask() is to initialize passed
virSocketAddr structure based on prefix length and family.
However, it doesn't set all members in the struct which may lead
to reads of uninitialized values:
==15421== Use of uninitialised value of size 8
==15421== at 0x50F297A: _itoa_word (in /lib64/libc-2.31.so)
==15421== by 0x510C8FE: __vfprintf_internal (in /lib64/libc-2.31.so)
==15421== by 0x5120295: __vsnprintf_internal (in /lib64/libc-2.31.so)
==15421== by 0x50F8969: snprintf (in /lib64/libc-2.31.so)
==15421== by 0x51BB602: getnameinfo (in /lib64/libc-2.31.so)
==15421== by 0x496DEE0: virSocketAddrFormatFull (virsocketaddr.c:486)
==15421== by 0x496DD9F: virSocketAddrFormat (virsocketaddr.c:444)
==15421== by 0x11871F: networkDnsmasqConfContents (bridge_driver.c:1404)
==15421== by 0x1118F5: testCompareXMLToConfFiles (networkxml2conftest.c:48)
==15421== by 0x111BAF: testCompareXMLToConfHelper (networkxml2conftest.c:112)
==15421== by 0x112679: virTestRun (testutils.c:142)
==15421== by 0x111D09: mymain (networkxml2conftest.c:144)
==15421== Uninitialised value was created by a stack allocation
==15421== at 0x1175D2: networkDnsmasqConfContents (bridge_driver.c:1056)
All callers expect the function to initialize the structure
fully.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Recently virtio-9p support was added to bhyve.
On the host side it looks this way:
bhyve .... -s 25:0,virtio-9p,sharename=/path/to/shared/dir
It could also have ",ro" suffix to make share read-only.
In the Linux guest, this share is mounted with:
mount -t 9p sharename /mnt/sharename
In the guest user will see the same permissions and ownership
information for this directory as on the host. No uid/gid remapping is
supported, so those could resolve to wrong user or group names.
The same applies to the other side: chowning/chmodding in the guest will
set specified ownership and permissions on the host.
In libvirt domain XML it's modeled using the 'filesystem' element:
<filesystem type='mount'>
<source dir='/path/to/shared/dir'/>
<target dir='sharename'/>
</filesystem>
Optional 'readonly' sub-element enables read-only mode.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As preparation for g_autoptr() we need to change the function to take
only virCgroupPtr.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
"cpu_map.xml" was moved to a directory "cpu_map" and split up into
several files.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We don't use the lib prefix for all libraries but in these cases it
makes sense to use the prefix.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: John Ferlan <jferlan@redhat.com>
Fixes: 8487595bee
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The original descirption for *_tls_x509_verify is a little misleading
by saying that "Enabling this option will reject any client who does
not have a ca-cert.pem certificate".
Signed-off-by: Fangge Jin <fjin@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This header's main purpose was to work around bugs in older versions of
openwsman. Most of the files using it only needed wsman-api.h, which
they now include directly.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Bug fixes and comments specific to older versions have been removed.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Hyper-V version numbers are not compatible with the encoding in
virParseVersionString():
https://gitlab.com/libvirt/libvirt/-/blob/master/src/util/virutil.c#L246
For example, the Windows Server 2016 Hyper-V version is 10.0.14393: its
micro is over 14 times larger than the encoding allows.
This commit repacks the Hyper-V version number in order to preserve all
of the digits. The major and minor are concatenated (with minor zero-
padded to two digits) to form the repacked major value. This works
because Microsoft's major and minor versions numbers are unlikely to
exceed 99. The repacked minor value is derived from the digits in the
thousands, ten-thousands, and hundred-thousands places of Hyper-V's
micro. The repacked micro is derived from the digits in the ones, tens,
and hundreds places of Hyper-V's micro.
Co-authored-by: Sri Ramanujam <sramanujam@datto.com>
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
CurrentTimeZone's type is a signed integer, not unsigned.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This eliminates some duplicate code and simplifies the driver functions.
Co-authored-by: Sri Ramanujam <sramanujam@datto.com>
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some CPU model names were too long for _virNodeInfo.model.
For example: Intel Xeon CPU E5-2620 v2 @ 2.10GHz
This commit removes the clock frequency suffix.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are two specific WQL queries we're using to get either a list of
virtual machines or the hypervisor host itself from Msvm_ComputerSystem.
Those queries rely on filtering results based on the "Description"
field. Since the "Description" field is locale sensitive, the queries
will fail if the Windows host is using a language pack. While the WSMAN
spec allows the client to set the requested locale (and it is supported
since openwsman 2.6.x), the Windows WinRM service does not respect this
setting: it returns non-English strings despite the WSMAN request
properly setting the locale to 'en-US'. Therefore, this patch changes
the WQL query to make use of the "__SERVER" field to stop relying on
English strings in queries and side step the issue.
Co-authored-by: Dawid Zamirski <dzamirski@datto.com>
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_new0 for allocation and remove all the temporary
variables.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In 88957116c9 I've switched to -machine memory-backend=ID and
-object memory-backend-* because QEMU is obsoleting -mem-path
and -mem-prealloc. However, what I did not foresee was that using
-machine memory-backend in combination with -numa is not allowed
in QEMU. This was reported upstream and fortunately not released
yet.
The problem is that if domain has NUMA nodes then we will
generate memory-backend-* objects for NUMA nodes (because if QEMU
is new enough to expose default RAM ID it also supports -numa
memdev=) and adding non-NUMA memory backend is wrong.
Reported-by: Masayoshi Mizuma <msys.mizuma@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
For readability, and to ensure we do allocation when
returning 0.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
We only care about the first part of the 'ifname' string,
splitting it is overkill.
Instead, just replace the ':' with a '\0' in a copy of the string.
This reduces the count of the varaibles containing some form
of the interface name to two.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
The error check for ValueObjectGet("return") is redundant,
qemuAgentCommand already checked for us that the reply contains
a "return" object.
It does not guarantee, that it is an array.
Use virJSONValueObjectGetArray that combines getting the object
with checking for its type and return the more helpful of
the two error messages.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Convert one interface from the "return" array returned by
"guest-network-get-interfaces" to virDomainInterface.
Due to the functionality of squashing interface aliases together,
this is not a pure function - it either:
* Adds the interface to ifaces_ret, incrementing ifaces_count
and adds a pointer to it into the ifaces_store hash table.
* Adds the additional IP addresses from the interface alias
to the existing interface entry, found through the hash table.
This does not increment ifaces_count or extend the array.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
We have a local 'iface' variable that contains the same value
eventually. Initialize it early instead of indexing two more
times.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
We're passing 'ifaces_count' to virHashCreate as the initial
hash table size just after we've initialized it to zero.
This translates to a default of 256 inside virHashCreateFull.
Instead of this obfuscation, use virHashNew (default of 32),
to make it obvious we don't care about the initial hash size.
Also remove the error handling, since neither of the functions
return any errors after switching to g_new0.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
This lets us conveniently reduce its scope to the outer loop.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
qemuAgentGetInterfaceOneAddress returns exactly one address
for every iteration of the loop (and we error out if not).
Instead of expanding the addrs by one on every iteration,
do it upfront since we know how many times the loop will
execute.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
For both 'ip_addr_arr' and 'ret_array', we:
1) already checked that they are arrays
2) only iterate up to the array size
Remove the duplicate checks.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
A function that takes one entry from the "ip-addresses" array
returned by "guest-network-get-interfaces" and converts it
into virDomainIPAddress.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
virJSONValueObjectGetArray returns NULL if the object with
the supplied key is not an array.
Calling virJSONValueIsArray right after is redundant.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Remove the pointless variable and pointer stealing.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The feature is filtered by KVM and never automatically enabled. So even
though QEMU definition of EPYC-Rome contains this feature, the guest
won't see it. Also domain capabilities will show it as disabled for KVM
domains. Thus the feature should not really be included in our
definition of EPYC-Rome.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This adds a new value to virConnectCompareCPUFlags,
"VIR_CONNECT_CPU_VALIDATE_XML", that governs XML document validation in
virCPUDefParseXML.
In src/conf/cpu_conf.c, include configmake.h for PKGDATADIR and
virfile.h for virFileFindResource.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Validation is usually performed on an entire document. If we are only
interested in validating a single nested node that can occur in
different contexts, this would require writing different schemas for
any of those different contexts.
By temporarily replacing the document's root node, we can validate the
relevant node only.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
I left in a 'return' or 'goto cleanup' in a few places
where I did the conversion manually.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Modify virCPUarmCompare in cpu_arm.c to perform compare action.
This patch only adds host to host CPU compare, the rest cases
remains the same. This is useful for source and destination host
compare during migrations to avoid migration between different
CPU models that have different CPU freatures.
Signed-off-by: Zhenyu Zheng <zheng.zhenyu@outlook.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move them to separate conditions to reduce churn
in following patches.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Change the interface of esxUtil_ResolveHostname() to return a newly
allocated string with the result address, instead of forcing the callers
to provide a buffer and its size. This way we can simply (auto)free the
string, and make the function stacks smaller.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Call freeaddrinfo() as soon as @result is not needed anymore, i.e. right
after getnameinfo(); this avoids calling freeaddrinfo() in two branches.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Previous refactors allow us to plainly replace all VIR_FREE by g_free to
finish the modernization of the file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Restructure the control-flow a bit using an temporary variable to avoid
the need to use VIR_FREE.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use modern allocators, automatic memory feeing, and decrease the scope
of some variables to remove the 'cleanup' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use modern allocators, automatic memory feeing, and decrease the scope
of some variables to remove the 'error' and 'cleanup' labels.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use modern allocators, automatic memory feeing, and decrease the scope
of some variables to remove the 'error' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory freeing to get rid of the 'error' label. Since the
'tmp' variable was used only in one instance, rename it appropriately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use modern memory handling approach to simplify the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use modern memory handling approach to simplify the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Register the the cleanup functions for 'qemuMigrationCookieGraphics',
'qemuMigrationCookieNetwork', 'qemuMigrationCookieNBD', and
'qemuMigrationCookieCaps'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Switch to automatic memory cleaning, use g_new0 for allocation and get
rid of the 'error' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the code into 'qemuMigrationCookieNBDXMLFormat' and use modern XML
formatting code patterns.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use 'virXMLFormatElement' both for formating the whole <network> element
but also for formatting the <interface> subelements. This alows to
remove the crazy logic which was determining which element was already
formatted.
Additional simplification is achieved by switching to skipping the loop
using 'continue' rather than putting everything in a giant block.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Switch to the two buffer approach to simplify the logic for terminating
the element.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now it only returns -1 so we can do that directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most of our functions report errors so there's no need to mention it
here again.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Make sure that 'virXPathNodeSet' returns '1' as the only expected value
rather than relying on the fact that the previous check for the number
of elements ensures success of the subsequent call.
The error message no longer mentions the number of <domain> elements in
the cookie, but this is a very unlikely internal error anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Don't reuse 'tmp' over and over, but switch to single use automaticaly
freed variables instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the code into 'qemuMigrationCookieXMLParseMandatoryFeatures' to
simplify 'qemuMigrationCookieXMLParse'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After recent refactors the function can be refactored to remove the
'cleanup' label by using autoptr for the 'map' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we use g_new0 there's no need for the 'cleanup' label as there's
nothing to fail after the allocation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are only 3 places using the function. Two can use virBitmapNewCopy
directly. In case of the qemu capabilities code we need to free the old
bitmap first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virBitmapCopy has a failure condition, which is impossible to meet when
creating a new copy. Copy the contents directly to make it obvious that
virBitmapNewCopy can't fail.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Error out on (impossible) failed allocation, to reduce
indentation.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Elimination of the positive conditions reduces
the indentation by two levels.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Create a separate scope where 'tmp' variable can be used.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We no longer report any errors so all callers can be replaced by
virBitmapNew. Additionally virBitmapNew can't return NULL now so error
handling is not necessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now always return a valid pointer or crash so the return value
doesn't need to be checked.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify the condition which would make virBitmapNewQuiet fail to possibly
overallocate by 1 rather than failing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now have APIs which automatically expand the bitmap and also API
which allocates a 0 size bitmap. Remove the condition from virBitmapNew.
Effectively reverts ce49cfb48a
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virBitmapNewEmpty() can create a bitmap with 0 length. With such a
bitmap virBitmapToString will return NULL rather than an empty string.
Initialize the buffer to avoid that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Clarify which bit is considered most significant in the bitmap and
resulting string. Also be explicit that it's a hex string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's only one combination used so we can remove the rest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When VIR_EXEC_DAEMON is true and cmd->pidfile exists, the parent
will expect the pidfile to be written before exiting, sitting
tight in a saferead() call waiting.
The child then does process tuning (via virProcessSet* functions)
before writing the pidfile. Problem is that these tunings can
fail, and trigger a 'fork_error' jump, before cmd->pidfile is
written. The result is that the process was aborted in the
child, but the parent is still hang in the saferead() call.
This behavior can be reproduced by trying to create and execute
a QEMU guest in user mode (e.g. using qemu:///session as non-root).
virProcessSetMaxMemLock() will fail if the spawned libvirtd user
process does not have CAP_SYS_RESOURCE capability. setrlimit() will
fail, and a 'fork_error' jump is triggered before cmd->pidfile
is written. The parent will hung in saferead() indefinitely. From
the user perspective, 'virsh start <guest>' will hang up
indefinitely. CTRL+C can be used to retrieve the terminal, but
any subsequent 'virsh' call will also hang because the previous
libvirtd user process is still there.
We can fix this by moving all virProcessSet*() tuning functions
to be executed after cmd->pidfile is taken care of. In the case
mentioned above, this would be the result of 'virsh start'
after this patch:
error: Failed to start domain vm1
error: internal error: Process exited prior to exec: libvirt: error :
cannot limit locked memory to 79691776: Operation not permitted
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1882093
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Assume nobody runs current libvirt on kernels such as 2.6.26.
Kernel commit 9f9c9cbb60576a1518d0bf93fb8e499cffccf377 (released
in 3.8) mentions the new path and I believe it was added by:
commit 948af1f0bbc8526448e8cbe3f8d3bf211bdf5181
firmware: Basic dmi-sysfs support
(released in 2.6.39), but I cannot figure out how all that
kernel automagic works.
This reverts commit 4c81b0fdc5
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The @checkMACAddress string is allocated in
virVMXGetConfigString() but never freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
On EOF condition we always have POLLHUP event and read returns
0 thus we never break loop in virLogHandlerDomainLogFileDrain.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If writing side writes enough bytes to the pipe and closes writing
end then we got both VIR_EVENT_HANDLE_HANGUP and VIR_EVENT_HANDLE_READ
in handler. Currently in this situation handler reads 1024 bytes
and finish reading leaving unread data in pipe.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Lack of this one function (which is called for each active tap device
every time libvirtd is started) is the one thing preventing a
"WITHOUT_LIBNL" build of libvirt from being useful. With this
alternate implementation, guests using standard tap devices will work
properly even when libvirt is built without libnl support.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There was one stray bit of code in virnetdev.c that required libnl to
build, but wasn't qualified by defined(WITH_LIBNL). Adding that, plus
putting a similar check around a static function only used by that
aforementioned code, makes libvirt build properly without libnl3-devel
installed.
How useful it is in that state is a separate issue :-)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This flag was originally created to indicate that either 1) the build
platform wasn't linux, 2) the build platform was linux, but the kernel
was too old to have macvtap support. Since there was already a switch
there, the ability to also disable it when 3) the kernel supports
macvtap but the user doesn't want it, was added in. I don't think that
(3) was ever an intentional goal, just something that grew naturally
out of having the flag there in the first place (unless possibly the
original author wanted a way to quickly disable their new code in case
it caused regressions elsewhere).
Now that the check for (2) has been removed, WITH_MACVTAP is just
checking (1) and (3), but (3) is pointless (because the extra code in
libvirt itself is miniscule, and the only external library needed for
it is libnl, which is also required for other unrelated features (and
itself has no subordinate dependencies and takes up < 1MB on
disk)). We can therfore eliminate the WITH_MACVTAP flag, as it is
functionally equivalent to WITH_LIBNL (which implies __linux__).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
macvlan support was added to the Linux kernel in 2.6.33, but
MACVLAN_MODE_PASSTHRU wasn't added until 2.6.38, so a workaround had
been put in place to define that constant on those few systems where
it was missing. It's useful like was probably 6 months at most, but
it's been there for over 10 years.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
WITH_VIRTUALPORT just checks that we are building on Linux and that
IFLA_PORT_MAX is defined in linux/if_link.h. Back when 802.11Qb[gh]
support was added, the IFLA_* stuff was new (introduced in kernel
2.6.35, backported to RHEL6 2.6.32 kernel at some point), and so this
extra check was necessary, because libvirt was being built on Linux
distros that didn't yet have IFLA_* (e.g. older RHEL6, all
RHEL5). It's been in the kernel for a *very* long time now, so all
supported versions of all Linux platforms libvirt builds on have it.
Note that the above paragraph implies that the conditional compilation
should be changed to #if defined(__linux__). However, the astute
reader will notice that the code in question is sending and receiving
netlink messages, so it really should be conditional on WITH_LIBNL
(which implies __linux__) instead, so that's what this patch does.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
WITH_LIBNL will only be defined on Linux platforms (because libnl is a
library written to encapsulate parts of netlink, which is a Linux-only
API), so it's redundant to write:
#if defined(__linux__) && defined(WITH_LIBNL)
We can just check for WITH_LIBNL.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
IFLA_VF_MAX was introduced to the Linux kernel in 2.6.35, and was even
backported to the RHEL*6* 2.6.32 kernel downstream, so it is present
in all supported versions of all Linux distros that libvirt builds
on. Additionally, it can't be conditionally compiled out of a
kernel. There is no reason to conditionalize any piece of code on
presence of IFLA_VF_MAX - if the platform is Linux, it is supported.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All these lines were moved over from the now-defunct
virDomainNetDefClear(), which required all pointers to be cleared
after free, but virDomainNetDefFree() doesn't have that restriction -
after free'ing the pointers are never again referenced, so g_free() is
safe.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function is no longer used anywhere except virDomainNetDefFree(),
so just inline its contents there.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Instead of saving the interesting pieces of each existing NetDef,
clearing it, and then copying back the saved pieces after setting the
type to ethernet, just create a new NetDef, copy in the interesting
bits, and replace the old one. (The end game is to eliminate
virDomainNetDefClear() completely, since this is the only real use)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Take the easy way out and use typeof, because my life
is too short to spend it reading gendispatch.pl.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The former has been present since
commit f43798c27684ab925adde7d8acc34c78c6e50df8
Author: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu Jul 3 03:48:02 2008 -0700
tun: Allow GSO using virtio_net_hdr
and the latter since
commit bbb009941efaece3898910a862f6d23aa55d6ba8
Author: Jason Wang <jasowang@redhat.com>
Date: Wed Oct 31 19:45:59 2012 +0000
tuntap: introduce multiqueue flags
these are old enough that they can be assumed present in all Linux
platforms we support. The tap device creation code changed is specific
to Linux, with a separate impl for non-Linux platforms.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Check whether the alloc result is negative (which is
cannot happen with current code) to reduce churn in
the following commit.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use goto to jump over the ret = 0 assignment
as is usual in rest of the code.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
So far, Libvirt configures memory-backend-* for memory hotplug,
possibly NUMA nodes and in a few other cases. This patch
switches to constructing the memory-backend-* command line for
all cases. To keep ability to migrate guests a little hack is
used: the ID of the object is set to the one that QEMU uses
internally anyways. These IDs are stable (first started to appear
somewhere around v0.13.0-rc0~96) and can't change.
In fact, this patch does exactly what QEMU does internally. The
reason for moving the logic into Libvirt is that QEMU wants to
deprecate the old style of specifying memory.
So far, only x84_64 test cases are changed, because tests for
other architectures use older capabilities, which still lack the
QEMU_CAPS_MACHINE_MEMORY_BACKEND capability and they don't report
the RAM ID.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1836043
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The machine structure has another (optional) attribute:
default-ram-id, which specifies the alias of the default RAM
object. While the alias is private, it can never change in order
to not break migration. QEMU uses the alias when allocating
regular, not NUMA memory. In order to switch to new command line
and maintain migration, save this ID.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The objects at @def and @mem pointers are only read and not
written. Make the arguments const to make that explicit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
