When editing guest's XML (on QEMU), it was possible to add multiple
listen elements into graphics parent element. However QEMU does not
support listening on multiple addresses. Configuration is tested for
multiple 'listen address' and if positive, an error is raised.
https://bugzilla.redhat.com/show_bug.cgi?id=1119212
During a QEMU live migration several warning messages about job
handling could be written to syslog on the destination host:
"entering monitor without asking for a nested job is dangerous"
The messages are written because the job handling during migration
uses hard coded asyncJob values in several places that are incorrect.
This patch passes the required asyncJob value around and prevents
the warnings as well as any issues that the warnings may be referring
to.
https://bugzilla.redhat.com/show_bug.cgi?id=1130089
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
At the beginning of the qemu config file parsing function there
are 3 helper macros defined: GET_VALUE_BOOL, GET_VALUE_LONG and
GET_VALUE_STR. Later, when they are no longer needed they are
undefined in order to keep the namespace clean. However, the
GET_VALUE_STRING is undefined instead of GET_VALUE_STR.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Implement ZFS storage backend driver. Currently supported
only on FreeBSD because of ZFS limitations on Linux.
Features supported:
- pool-start, pool-stop
- pool-info
- vol-list
- vol-create / vol-delete
Pool definition looks like that:
<pool type='zfs'>
<name>myzfspool</name>
<source>
<name>actualpoolname</name>
</source>
</pool>
The 'actualpoolname' value is a name of the pool on the system,
such as shown by 'zpool list' command. Target makes no sense
here because volumes path is always /dev/zvol/$poolname/$volname.
User has to create a pool on his own, this driver doesn't
support pool creation currently.
A volume could be used with Qemu by adding an entry like this:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='myzfspool' volume='vol5'/>
<target dev='hdc' bus='ide'/>
</disk>
In qemuMigrationToFile we enter the monitor multiple times and don't
check if the VM is still alive after returning form the monitor. Add the
checks to skip pieces of code in case the VM crashes while saving it's
state.
Saving a shutoff VM doesn't make sense and libvirtd crashes while
attempting to do that. Check that the domain is alive after entering
the save async job.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1129207
A command to freeze a part of mounted file systems is implemented in
upstream QEMU-guest-agent with a name of 'guest-fsfreeze-freeze-list'.
This fixes the name of the command used to partial fsfreeze in qemu driver
when 'mountpoints' option is specified to virDomainFSFreeze API.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
The virDomainSetInterfaceParameters implementation in qemu over
VIR_DOMAIN_AFFECT_CONFIG doesn't work as expected. When trying to
clear out the bandwidth settings for an interface, it has no
actual effect:
virsh # domiftune --config $domain $interface
inbound.average: 100
inbound.peak : 0
inbound.burst : 0
outbound.average: 10
outbound.peak : 0
outbound.burst : 0
virsh domiftune --config $domain $interface 0 0
virsh # domiftune --config $domain $interface
inbound.average: 100
inbound.peak : 0
inbound.burst : 0
outbound.average: 10
outbound.peak : 0
outbound.burst : 0
But according to virsh man page:
To clear inbound or outbound settings, use --inbound or
--outbound respectfully with average value of zero.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
During review of the iSCSI hostdev series, eblake noted that the
prototypes shouldn't have the extranenous space between the "*" and
the function name:
http://www.redhat.com/archives/libvir-list/2014-July/msg01227.html
Since it was more invasive than 1 or 2 lines - I said I'd send a
patch covering this once committed.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit febf84c2 tried to delay in-memory modification of the actual
domain disk structure until after the qemu event was received.
However, I missed that the code for block pivot had been temporarily
setting disk->src = disk->mirror prior to the qemu command, in order
to label the backing chain of a reused external blockcopy disk;
and calls into qemu while still in that state before finally undoing
things at the cleanup label. Since the qemu event handler then does:
virStorageSourceFree(disk->src);
disk->src = disk->mirror;
we have the sad race that a fast enough qemu event can cause a leak of
the original disk->src, as well as a use-after-free of the disk->mirror
contents, bad enough to crash libvirtd in some of my test runs, even
though the common case of the qemu event being much later won't trip
the race.
I'll go wear the brown paper bag of shame, for introducing a crasher
in between rc1 and rc2 of the freeze for 1.2.7 :( My only
consolation is that virDomainBlockJobAbort requires the domain:write
ACL, so it is not a CVE.
The valgrind report when the race occurs looks like:
==25612== Invalid read of size 4
==25612== at 0x50E7C90: virStorageSourceGetActualType (virstoragefile.c:1948)
==25612== by 0x209C0B18: qemuDomainDetermineDiskChain (qemu_domain.c:2473)
==25612== by 0x209D7F6A: qemuProcessHandleBlockJob (qemu_process.c:1087)
==25612== by 0x209F40C9: qemuMonitorEmitBlockJob (qemu_monitor.c:1357)
...
==25612== Address 0xe4b5610 is 0 bytes inside a block of size 200 free'd
==25612== at 0x4A07577: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==25612== by 0x50839E9: virFree (viralloc.c:582)
==25612== by 0x50E7E51: virStorageSourceFree (virstoragefile.c:2015)
==25612== by 0x209D7EFF: qemuProcessHandleBlockJob (qemu_process.c:1073)
==25612== by 0x209F40C9: qemuMonitorEmitBlockJob (qemu_monitor.c:1357)
* src/qemu/qemu_driver.c (qemuDomainBlockPivot): Don't corrupt
disk->src, and only label chain for blockcopy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Fix a comment in virDomainAuditNetDevice.
Fix a typo in comment of qemuPhysIfaceConnect which is
the caller of virDomainAuditNetDevice.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Commit 232a31b munged job info to report 'active commit' instead of
'commit' when generating events, but forgot to also munge the polling
variant of the command.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Adjust type as
needed.
Signed-off-by: Eric Blake <eblake@redhat.com>
Otherwise this beautiful error would be overwritten when
the function is called with a really high rate number:
2014-07-28 12:51:47.920+0000: 2304: error : virCommandWait:2399 :
internal error: Child process (/sbin/tc class add dev vnet0 parent 1:
classid 1:1 htb rate 4294968kbps) unexpected exit status 1: Illegal "rate"
Usage: ... qdisc add ... htb [default N] [r2q N]
default minor id of class to which unclassified packets are sent {0}
r2q DRR quantums are computed as rate in Bps/r2q {10}
debug string of 16 numbers each 0-3 {0}
... class add ... htb rate R1 [burst B1] [mpu B] [overhead O]
[prio P] [slot S] [pslot PS]
[ceil R2] [cburst B2] [mtu MTU] [quantum Q]
rate rate allocated to this class (class can still borrow)
burst max bytes burst which can be accumulated during idle period {computed}
mpu minimum packet size used in rate computations
overhead per-packet size overhead used in rate computations
linklay adapting to a linklayer e.g. atm
ceil definite upper class rate (no borrows) {rate}
cburst burst but for ceil {computed}
mtu max packet size we create rate map for {1600}
prio priority of leaf; lowe
https://bugzilla.redhat.com/show_bug.cgi?id=1043735
There are multiple mount points after commit 725a211f, but one comment
wasn't changed to use plurals.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
With this in place, I can (finally!) now do:
virsh blockcommit $dom vda --shallow --verbose --pivot
and watch qemu shorten the backing chain by one, followed by
libvirt automatically updating the dumpxml output, effectively
undoing the work of virsh snapshot-commit --no-metadata --disk-only.
Commit is SOOOO much faster than blockpull, when I'm still fairly
close in time to when the temporary qcow2 wrapper file was created
via a snapshot operation!
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Implement live
commit.
Signed-off-by: Eric Blake <eblake@redhat.com>
A future patch is going to wire up qemu active block commit jobs;
but as they have similar events and are canceled/pivoted in the
same way as block copy jobs, it is easiest to track all bookkeeping
for the commit job by reusing the <mirror> element. This patch
adds domain XML to track which job was responsible for creating a
mirroring situation, and adds a job='copy' attribute to all
existing uses of <mirror>. Along the way, it also massages the
qemu monitor backend to read the new field in order to generate
the correct type of libvirt job (even though it requires a
future patch to actually cause a qemu event that can be reported
as an active commit). It also prepares to update persistent XML
to match changes made to live XML when a copy completes.
* docs/schemas/domaincommon.rng: Enhance schema.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (_virDomainDiskDef): Add a field.
* src/conf/domain_conf.c (virDomainBlockJobType): String conversion.
(virDomainDiskDefParseXML): Parse job type.
(virDomainDiskDefFormat): Output job type.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Distinguish
active from regular commit.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Set job type.
(qemuDomainBlockPivot, qemuDomainBlockJobImpl): Clean up job type
on completion.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old.xml:
Update tests.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-disk-active-commit.xml: New
file.
* tests/qemuxml2xmltest.c (mymain): Drive new test.
Signed-off-by: Eric Blake <eblake@redhat.com>
We were not directly saving the domain XML to file after starting
or finishing a blockcopy. Without the startup write, a libvirtd
restart in the middle of a copy job would forget that the job was
underway. Then at pivot, we were indirectly writing new XML in
reaction to events that occur as we stop and restart the guest CPUs.
But there was a race: since pivot is an async action, it is possible
that libvirtd is restarted before the pivot completes, so if XML
changes during the event, that change was not written. The original
blockcopy code cleared out the <mirror> element prior to restarting
the CPUs, but this is also a race, observed if a user does an async
pivot and a dumpxml before the event occurs. Furthermore, this race
will interfere with active commit in a future patch, because that
code will rely on the <mirror> element at the time of the qemu event
to determine whether to inform the user of a normal commit or an
active commit.
Fix things by saving state any time we modify live XML, while
delaying XML disk modifications until after the event completes. We
still need a to teach libvirtd restarts to examine all existing
<mirror> elements to see if the job completed in the meantime (that
is, if libvirtd misses the event, the updated state still needs to be
updated in live XML), but that will be a later patch, in part because
we also need to to start taking advantage of newer qemu's ability to
keep the job around after completion rather than the current usage
where the job disappears both on error and on success.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Track XML change
on disk.
(qemuDomainBlockJobImpl, qemuDomainBlockPivot): Move job-end XML
rewrites...
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): ...here.
Signed-off-by: Eric Blake <eblake@redhat.com>
Doing a blockcopy operation across a libvirtd restart is not very
robust at the moment. In particular, we are clearing the <mirror>
element prior to telling qemu to finish the job. Also, thanks to the
ability to request async completion, the user can easily regain
control prior to qemu actually finishing the effort, and they should
be able to poll the domain XML to see if the job is still going.
A future patch will fix things to actually wait until qemu is done
before modifying the XML to reflect the job completion. But since
qemu issues identical BLOCK_JOB_COMPLETE events regardless of whether
the job was cancelled (kept the original disk) or completed (pivoted
to the new disk), we have to track which of the two operations were
used to end the job. Furthermore, we'd like to avoid attempts to
end a job where we are already waiting on an earlier request to qemu
to end the job. Likewise, if we miss the qemu event (perhaps because
it arrived during a libvirtd restart), we still need enough state
recorded to be able to determine how to modify the domain XML once
we reconnect to qemu and manually learn whether the job still exists.
Although this patch doesn't actually fix the problem, it is a
preliminary step that makes it possible to track whether a job
has already begun steps towards completion.
* src/conf/domain_conf.h (virDomainDiskMirrorState): New enum.
(_virDomainDiskDef): Convert bool mirroring to new enum.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainDiskDefFormat): Handle new values.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Adjust
client.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl): Likewise.
* docs/schemas/domaincommon.rng (diskMirror): Expose new values.
* docs/formatdomain.html.in (elementsDisks): Document it.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
If PCI passthrough type is not supported, we should error out rather than
continue building the command line.
When starting a domain, the type has been already checked by
qemuPrepareHostdevPCICheckSupport() before building qemu command line,
so the problem doesn't emerge.
But when coverting a domain xml without specifying passthrough type explictly
to qemu arg, we will get a malformed command line.
the xml:
<hostdev mode='subsystem' type='pci' managed='yes'>
<source>
<address domain='0x0001' bus='0x03' slot='0x00' function='0x0'/>
</source>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</hostdev>
the converted command line:
-device ,host=0001:03:00.0,id=hostdev0,bus=pci.0,addr=0x5
After this patch, virsh gives an error message:
virsh domxml-to-native qemu-argv /tmp/tmp.xml
error: internal error: invalid PCI passthrough type 'default'
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Use better detection of hugetlbfs mount points. Yes, there can be
multiple mount points each serving different huge page size.
Since we already have ability to override the mount point in the
qemu.conf file, this crazy backward compatibility code is brought in.
Now we allow multiple mount points, so the "hugetlbfs_mount" option
must take an list of strings (mount points). But previously, it was
just a string, so we must accept both types now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit e5f36698e3 introduces a
false-positive build failure in the sound card model handling switch.
Initialize the model to NULL although the value should never be used.
Libvirt documents that the default entropy source for the 'random'
backend of a RNG device is /dev/random. Instead of storing and
propagating NULL across our code and checking it in multiple places fill
the default in the post parse callback and use that in the other places.
Since 24e5cafba6 (thankfully unreleased)
when a VM with an empty disk drive would be started the code would call
stat() on NULL path as a check was missing from the callback rendering
machines unstartable.
Report success when the path is empty (denoting an empty drive).
The "random" backend for virtio-rng can be started with no path
specified which equals to /dev/random. The cgroup code didn't consider
this and called few of the functions with NULL resulting into:
$ virsh start rng-vm
error: Failed to start domain rng-vm
error: Path '(null)' is not accessible: Bad address
Problem introduced by commit c6320d3463
If user hasn't provided any @emulatorbin, the qemuCaps are
searched by @arch provided (which in fact can be guessed from the
host). However, there's no guarantee that the qemu binary for
@arch will exist. Therefore qemu capabilities may be nonexistent
too. If that's the case, we should throw an error message prior
jumping onto 'cleanup' label as the helper lookup function
remains silent on no search result.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Create the structures and API's to hold and manage the iSCSI host device.
This extends the 'scsi_host' definitions added in commit id '5c811dce'.
A future patch will add the XML parsing, but that code requires some
infrastructure to be in place first in order to handle the differences
between a 'scsi_host' and an 'iSCSI host' device.
Split virDomainHostdevSubsysSCSI further. In preparation for having
either SCSI or iSCSI data, create a union in virDomainHostdevSubsysSCSI
to contain just a virDomainHostdevSubsysSCSIHost to describe the
'scsi_host' host device
To integrate the security driver with the storage driver we need to
pass a callback for a function that will chown storage volumes.
Introduce and document the callback prototype.
Up to now, users have to pass two arguments at least: domain virt type
('qemu' vs 'kvm') and one of emulatorbin or architecture. This is not
much user friendly. Nowadays users mostly use KVM and share the host
architecture with the guest. So now, the API (and subsequently virsh
command) can be called with all NULLs (without any arguments).
Before this patch:
# virsh domcapabilities
error: failed to get emulator capabilities
error: virttype_str in qemuConnectGetDomainCapabilities must not be NULL
# virsh domcapabilities kvm
error: failed to get emulator capabilities
error: invalid argument: at least one of emulatorbin or architecture fields must be present
After:
# virsh domcapabilities
<domainCapabilities>
<path>/usr/bin/qemu-system-x86_64</path>
<domain>kvm</domain>
<machine>pc-i440fx-2.1</machine>
<arch>x86_64</arch>
<vcpu max='255'/>
</domainCapabilities>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds back the virDomainDef typedef into domain_conf and
makes all the numatune_conf functions independent of any virDomainDef
definitions.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1122205
Although the edits were changing in-memory XML, it was not flushed
to disk; so unless some other action changes XML, a libvirtd restart
would lose the changed information.
* src/conf/domain_conf.c (virDomainObjSetMetadata): Add parameter,
to save live status across restarts.
(virDomainSaveXML): Allow for test driver.
* src/conf/domain_conf.h (virDomainObjSetMetadata): Adjust
signature.
* src/bhyve/bhyve_driver.c (bhyveDomainSetMetadata): Adjust caller.
* src/lxc/lxc_driver.c (lxcDomainSetMetadata): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata): Likewise.
* src/test/test_driver.c (testDomainSetMetadata): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Before:
virsh # dominfo chx3
State: shut off
Max memory: 92160 KiB
Used memory: 92160 KiB
After:
virsh # dominfo container1
State: shut off
Max memory: 92160 KiB
Used memory: 0 KiB
Similar to qemu cases.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Convert the target snapshot state selector to a switch statement
enumerating all possible values. This points out a few mistakes in the
original selector.
The logic of the code is preserved until later patches.
As with the local SCSI passthrough devicesm qemu can't support snapshots
on those as the block ops are handled by the device. This is also true
for iSCSI backing of the disk. Remove the check for the local block
device and just forbid snapshot when the disk is of type 'lun'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1073368
When domain is started with numatune memory mode strict and the
nodeset does not include host NUMA node with DMA and DMA32 zones, KVM
initialization fails. This is because cgroup restrict even kernel
allocations. We are already doing numa_set_membind() which does the
same thing, only it does not restrict kernel allocations.
This patch leaves the userspace numa_set_membind() in place and moves
the cpuset.mems setting after the point where monitor comes up, but
before vcpu and emulator sub-groups are created.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Currently, we only bind the whole QEMU domain to memory nodes
specified in nodemask altogether. That, however, doesn't make much
sense when one wants to control from where the memory for particular
guest nodes should be allocated. QEMU allows us to do that by
specifying 'host-nodes' parameter for the 'memory-backend-ram' object,
so let's use that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When qemu switched to using OptsVisitor for -numa parameter, it did
two things in the same patch. One of them is that the numa parameter
is now visible in "query-command-line-options", the second one is that
it enabled using disjoint cpu ranges for -numa specification. This
will be used in later patch.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The numa patch series in qemu adds "memory-backend-ram" object type by
which we can tell whether we can use such objects.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
That can be lately achieved with by having .param == NULL in the
virQEMUCapsCommandLineProps struct.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There were numerous places where numatune configuration (and thus
domain config as well) was changed in different ways. On some
places this even resulted in persistent domain definition not to be
stable (it would change with daemon's restart).
In order to uniformly change how numatune config is dealt with, all
the internals are now accessible directly only in numatune_conf.c and
outside this file accessors must be used.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since there was already public virDomainNumatune*, I changed the
private virNumaTune to match the same, so all the uses are unified and
public API is kept:
s/vir\(Domain\)\?Numa[tT]une/virDomainNumatune/g
then shrunk long lines, and mainly functions, that were created after
that:
sed -i 's/virDomainNumatuneMemPlacementMode/virDomainNumatunePlacement/g'
And to cope with the enum name, I haad to change the constants as
well:
s/VIR_NUMA_TUNE_MEM_PLACEMENT_MODE/VIR_DOMAIN_NUMATUNE_PLACEMENT/g
Last thing I did was at least a little shortening of already long
name:
s/virDomainNumatuneDef/virDomainNumatune/g
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There are many places with numatune-related code that should be put
into special numatune_conf and this patch creates a basis for that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In XML format, by definition, order of fields should not matter, so
order of parsing the elements doesn't affect the end result. When
specifying guest NUMA cells, we depend only on the order of the 'cell'
elements. With this patch all older domain XMLs are parsed as before,
but with the 'id' attribute they are parsed and formatted according to
that field. This will be useful when we have tuning settings for
particular guest NUMA node.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Excerpt from the virCommandAddArgBuffer() description: "Correctly
transfers memory errors or contents from buf to cmd."
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch adds support for the QEMU vhost-user feature to libvirt.
vhost-user enables the communication between a QEMU virtual machine
and other userspace process using the Virtio transport protocol.
It uses a char dev (e.g. Unix socket) for the control plane,
while the data plane based on shared memory.
The XML looks like:
<interface type='vhostuser'>
<mac address='52:54:00:3b:83:1a'/>
<source type='unix' path='/tmp/vhost.sock' mode='server'/>
<model type='virtio'/>
</interface>
Signed-off-by: Michele Paolino <m.paolino@virtualopensystems.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1119173 documents that
commit eaba79d was flawed in the implementation of the
VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC flag when it comes to completing
a blockcopy. Basically, the qemu pivot action is async (the QMP
command returns immediately, but the user must wait for the
BLOCK_JOB_COMPLETE event to know that all I/O related to the job
has finally been flushed), but the libvirt command was documented
as synchronous by default. As active block commit will also be
using this code, it is worth fixing now.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Don't skip wait
loop after pivot.
Signed-off-by: Eric Blake <eblake@redhat.com>
In many places we define a variable as a 'const char *' when in fact
we modify it just a few lines below. Or even free it. We should not do
that.
There's one exception though, in xenSessionFree() xenapi_utils.c. We
are freeing the xen_session structure which is defined in
xen/api/xen_common.h public header. The structure contains session_id
which is type of 'const char *' when in fact it should have been just
'char *'. So I'm leaving this unmodified, just noticing the fact in
comment.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rename linuxDomainInterfaceStats to virNetInterfaceStats in order
to allow adding platform specific implementations without
making consumer worrying about specific implementation to be used.
Also, rename util/virstatslinux.c to util/virstats.c so placing
other platform specific implementations into this file don't
look unexpected from the file name.
4cc1f1a01f introduced a crash when doing a
block copy as virStorageSourceInitChainElement was called on
"disk->mirror" that is still NULL at that point instead of "mirror"
which temporarily holds the mirror source struct until it's fully
initialized. This resulted into a crash as a NULL was dereferenced.
Reported by: Shanzi Yu <shyu@redhat.com>
Commit id '3ea661de' refactored the code to use the 'disk->src->path'
instead of getting the path from virDomainDiskGetSource(). The one
call to qemuOpenFile() didn't use the disk source path, rather it used
the path as passed from the caller (in this case 'vda') - this caused
a failure with the virt-test/tp-libvirt as follows:
$ virsh domblkinfo virt-tests-vm1 vda
error: cannot stat file '/home/virt-test/shared/data/images/jeos-20-64.qcow2': Bad file descriptor
$
This saves a few lines of code and catches the error when:
<spice autoport ='yes' defaultMode='any' ..>
<channel name='main' mode='secure'/>
</spice>
is specified with spice_tls = 0 in qemu.conf.
Instead of this error in qemuBuildGraphicsSPICECommandLine:
error: unsupported configuration: spice secure channels set in XML
configuration, but TLS port is not provided
an error is reported in qemuProcessSPICEAllocatePorts:
error: unsupported configuration: Auto allocation of spice TLS port
requested but spice TLS is disabled in qemu.conf
Inspired by:
https://www.redhat.com/archives/libvir-list/2014-June/msg01408.html
When creating cgroups for vcpu and emulator threads whilst starting a
domain, we explicitly skip creating those cgroups in case priv->cgroup
is NULL (cgroups not supported) because SetAffinity() serves the same
purpose. If the host supports only some cgroups (the ones we need are
either unmounted or disabled in qemu.conf), we error out with weird
message even though we could continue starting the domain.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1097028
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The default graphics channel mode is 'any', so as to defaultMode attribute.
If defaultMode and channel mode are all the default value 'any',
qemuConnectDomainXMLToNative will set TLSPort.
But in qemuBuildGraphicsSPICECommandLine, if spice_tls is not enabled, libvirtd
will report an error to tell the user that spice TLS is disabled in qemu.conf.
So qemuConnectDomainXMLToNative should check spice_tls is enabled,
then decide to allocate an tlsPort number to this graphics.
If user specified defaultMode is 'secure', qemuConnectDomainXMLToNative
could allocate tlsPort, and then let qemuBuildGraphicsSPICECommandLine reports
the spice_tls disabled error.
The related bug is:
https://bugzilla.redhat.com/show_bug.cgi?id=1113868
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that cgroups/security driver/locking driver support labelling of
individual images and tolerate network storage we don't have to refrain
from passing all image files to it. This allows removing the checking
code as we already make sure that the snapshot function won't be called
with unsupported options.
Now that security, cgroup and locking APIs support working on individual
images and we track the backing chain security info on a per-image basis
we can finally kill swapping the disk source in virDomainDiskDef and use
the virStorageSource directly.
Until now we were changing information about the disk source via
multiple steps of copying data. Now that we changed to a pointer to
store the disk source we might use it to change the approach to track
the data.
Additionally this will allow proper tracking of the backing chain.
When pivoting to a new disk source after a block commit (and possibly
after a soon-to-be-added active block commit) we changed just a few
fields to the new target. In case we'd copy a network disk to a local
file we'd not change the type properly.
To avoid such problems, switch to tracking of the source via changing of
the complete source struct to the one tracking the mirroring info.
Use the source struct and the corresponding function so that we can
avoid using the path separately. Now that
qemuDomainPrepareDiskChainElementPath isn't use anywhere, we can safely
remove it.
Additionally, the removal fixes a misaligned comment as the removed
function was added under a comment for a different function.
Add functions that will allow to set all the required cgroup stuff on
individual images taking a virStorageSourcePtr. Also convert functions
designed to setup whole backing chain to take advantage of the change.
Qemu will fallback to aio=threads when the cache mode doesn't use
O_DIRECT, even if aio=native was explictly set.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1086704
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
In the future we might need to track state of individual images. Move
the readonly and shared flags to the virStorageSource struct so that we
can keep them in a per-image basis.
Now that we are able to select images from the backing chain via indexed
access we should also convert possible network sources to
qemu-compatible strings before passing them to qemu.
Now that we are able to select images from the backing chain via indexed
access we should also convert possible network sources to
qemu-compatible strings before passing them to qemu.
The qemu block info function relied on working with local storage. Break
this assumption by adding support for remote volumes. Unfortunately we
still need to take a hybrid approach as some of the operations require a
filedescriptor.
Previously you'd get:
$ virsh domblkinfo gl vda
error: cannot stat file '/img10': Bad file descriptor
Now you get some stats:
$ virsh domblkinfo gl vda
Capacity: 10485760
Allocation: 197120
Physical: 197120
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1110198
For the regular dump operation we migrate the VM to a file. This won't
work when the VM has passthrough devices assigned. Rather than reporting
a cryptic error from qemu run our check whether it can be migrated.
This does not influence the memory-only dump that is allowed with
passthrough devices.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=874418
To allow changing the name that is recorded in the top of the current
image chain used in a block pull/rebase operation, we need to specify
the backing name to qemu. This is done via the "backing-file" attribute
to the block-stream commad.
To allow changing the name that is recorded in the overlay of the TOP
image used in a block commit operation, we need to specify the backing
name to qemu. This is done via the "backing-file" attribute to the
block-commit command.
This command allows to change the backing file name recorded in the
metadata of a qcow (or other) image. The capability also notifies that
the "block-stream" and "block-commit" commands understand the
"backing-file" attribute.
