The recent changes to perform SCSI device address checks during the
post parse callbacks ran afoul of the Coverity checker since the changes
assumed that the 'xmlopt' parameter to virDomainDeviceDefPostParse
would be non NULL (commit id 'ca2cf74e87'); however, what was missed
is there was an "if (xmlopt &&" check being made, so Coverity believed
that it could be possible for a NULL 'xmlopt'.
Checking the various calling paths seemingly disproves that. If called
from virDomainDeviceDefParse, there were two other possible calls that
would end up dereffing, so that path could not be NULL. If called via
virDomainDefPostParseDeviceIterator via virDomainDefPostParse there
are two callers (virDomainDefParseXML and qemuParseCommandLine)
which deref xmlopt either directly or through another call.
So I'm removing the check for non-NULL xmlopt.
Rather than provide a somewhat generic error message when the API
returns false, allow the caller to supply a "report = true" option
in order to cause virReportError's to describe which of the 3 paths
that can cause failure.
Some callers don't care about what caused the failure, they just want
to have a true/false - for those, calling with report = false should
be sufficient.
PowerPC pseries based VMs do not support a floppy disk controller.
This prohibits libvirt from creating qemu command with floppy device.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1180486
Signed-off-by: Ján Tomko <jtomko@redhat.com>
PowerPC pseries based VMs do not support a floppy disk controller.
This prohibits libvirt from adding floppy disk for a PowerPC pseries VM.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
Rather than calling virDomainDiskDefAssignAddress during the parsing of
the XML, moving the setting of disk addresses into the domain/device post
processing.
Commit id '37588b25' which introduced VIR_DOMAIN_DEF_PARSE_DISK_SOURCE
in order to avoid generating the address which wasn't required will not
be affected by this as all it cared about was processing the source XML.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than calling virDomainHostdevAssignAddress during the parsing
of the XML, move the setting of a default hostdev address to domain/
device post processing.
Since the parse code no longer generates an address, we can remove
the virDomainDefMaybeAddHostdevSCSIcontroller since the call to
virDomainHostdevAssignAddress will attempt to add the controllers
that were not already defined in the XML.
This patch will also enforce that the address type is type 'drive'
when a SCSI subsystem <hostdev> element is provided with an <address>.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If virDomainControllerSCSINextUnit failed to find a slot on the current
VIR_DOMAIN_CONTROLLER_TYPE_SCSI controller(s), try to add a new controller;
otherwise, there may be multiple unit=0 entries for the same "next"
controller.
Signed-off-by: John Ferlan <jferlan@redhat.com>
While searching the hostdevs the drive type can be either *_TYPE_DRIVE
or *_TYPE_NONE. If the type is _TYPE_NONE on the first scsi_host, then
there is an erroneous "match" that the address already exists.
Although this works by chance currently because hostdev's are added one
at a time and 'nhostdevs' would be zero, thus returning false for the
first hostdev added, a future patch will move the hostdev address
assignment into post processing resulting in the bad match.
This code is only called by path's expecting either drive or none.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add the xmlopt parameter that was saved during virDomainDefPostParse
to the parameters. A future patch will use it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Modify virDomainDriveAddressIsUsedBy{Disk|Hostdev} and
virDomainSCSIDriveAddressIsUsed to take 'bus' and 'target'
parameters. Will be used by future patches for more complete
address conflict checks
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since the only way virDomainHostdevAssignAddress can be called is from
within virDomainHostdevDefParseXML when hostdev->source.subsys.type is
VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI, thus there's no need for redundancy.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Compiler error:
../../src/nodeinfo.c: In function 'nodeGetThreadsPerSubcore':
../../src/nodeinfo.c:2393: error: label 'out' defined but not used [-Wunused-label]
../../src/nodeinfo.c:2352: error: unused parameter 'arch' [-Wunused-parameter]
The virDomainObjListRemove() function unlocks a domain that it's given
due to legacy code. And because of that code, which should be
refactored, that last virObjectUnlock() cannot be just removed. So
instead, lock it right back for qemu for now. All calls to
qemuDomainRemoveInactive() are followed by code that unlocks the domain
again, plus the domain should be locked during qemuDomainObjEndJob(), so
the right place to lock it is right after virDomainObjListRemove().
The only place where this would cause a problem is the autodestroy
callback, so we need to get another reference there and uref+unlock it
afterwards. Luckily, returning NULL from that function doesn't mean an
error, and only means that it doesn't need to be unlocked anymore.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The nodeinfo is reporting incorrect number of cpus and incorrect host
topology on PPC64 KVM hosts. The KVM hypervisor on PPC64 needs only
the primary thread in a core to be online, and the secondaries offlined.
While scheduling a guest in, the kvm scheduler wakes up the secondaries to
run in guest context.
The host scheduling of the guests happen at the core level(as only primary
thread is online). The kvm scheduler exploits as many threads of the core
as needed by guest. Further, starting POWER8, the processor allows splitting
a physical core into multiple subcores with 2 or 4 threads each. Again, only
the primary thread in a subcore is online in the host. The KVM-PPC
scheduler allows guests to exploit all the offline threads in the subcore,
by bringing them online when needed.
(Kernel patches on split-core http://www.spinics.net/lists/kvm-ppc/msg09121.html)
Recently with dynamic micro-threading changes in ppc-kvm, makes sure
to utilize all the offline cpus across guests, and across guests with
different cpu topologies.
(https://www.mail-archive.com/kvm@vger.kernel.org/msg115978.html)
Since the offline cpus are brought online in the guest context, it is safe
to count them as online. Nodeinfo today discounts these offline cpus from
cpu count/topology calclulation, and the nodeinfo output is not of any help
and the host appears overcommited when it is actually not.
The patch carefully counts those offline threads whose primary threads are
online. The host topology displayed by the nodeinfo is also fixed when the
host is in valid kvm state.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Use I/O vector (iovec) instead of one huge memory buffer as suggested
in https://bugzilla.redhat.com/show_bug.cgi?id=1026137#c7. This avoids
doing memmove() to big buffers and performance doesn't degrade if
source (virNetClientStreamQueuePacket()) is faster than sink
(virNetClientStreamRecvPacket()).
Resolves: http://bugzilla.redhat.com/1026137
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If cpuset is disabled or not available, it libvirt must not use it.
Mainly for actions that do not need it and can use sched_setaffinity()
or numa_membind() instead, because they will fail without good reason.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1244664
Signed-off-by: Luyao Huang <lhuang@redhat.com>
When stopping a domain on the destination host after a failed migration,
we need to avoid reseting security labels since the domain is still
running on the source host. While we were correctly doing so in some
cases, there were still some paths which did this wrong.
https://bugzilla.redhat.com/show_bug.cgi?id=1242904
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In addition to checking the current asynchronous job
qemuMigrationJobIsActive reports an error if the current job does not
match the one we asked for. Let's just check the job directly since we
are not interested in the error in qemuProcessHandleMonitorEOF.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If destination libvirt doesn't support memory hotplug since all the
support was introduced by adding new elements the destination would
attempt to start qemu with an invalid configuration. The worse part is
that qemu might hang in such situation.
Fix this by sending a required migration feature called 'memory-hotplug'
to the destination. If the destination doesn't recognize it it will fail
the migration.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1248350
So far qemu-nbd is run even if the nbd kernel module isn't loaded. This
leads to errors when the user starts his lxc container while libvirt
could easily load the nbd module automatically.
Our atomic increment (virAtomicIntInc) uses (if available) gcc
__sync_add_and_fetch builtin. In qemu driver though, we'd profit more
from __sync_fetch_and_add builtin. To keep it simplistic, this patch
adjusts qemu driver initialization rather than adding a new atomic
increment macro.
virDomainDeleteConfig is meant to delete the persistent config and thus
it resets vm->autostart. Copy parts of qemuProcessRemoveDomainStatus to
a new helper to avoid using the incorrect function.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1230071
The remoteDomainOpenGraphicsFD method was using the wrong RPC
arg struct remote_domain_open_graphics_args instead of
remote_domain_open_graphics_fd_args. Fortunately both structs
had identical contents so there was no functional bug, but to
avoid confusing future maintainers, we should fix it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
First hunk changes the use of srcdir to top_srcdir so it complies with
other rules in the Makefile. Second one removes the need of
remote_protocol.h in admin_protocol.h as it was suggested and worked in,
but this one line was missed apparently. Last one just removes the
'remote' naming from admin protocol specification, just so it's cleaner.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit d506a51aeb meant to check for
QEMU_CAPS_DRIVE_IOTUNE_MAX, but checked for QEMU_CAPS_DRIVE_IOTUNE
instead. That's clearly visible from the diff, but it got in. Because
of that, we were supplying information unknown for QEMU if it wasn't new
enough and we couldn't even properly handle the error, leading to
"Unexpected error". Also iops_size came at the same time with all the
other "_max" options, so check whether we're not setting that either if
QEMU_CAPS_DRIVE_IOTUNE_MAX is not supported.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1224053
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There are some non-0 default values in virDomainControllerDef (and
will soon be more) that are easier to not forget if the remembering is
done by a single initializer function (rather than inline code after
allocating the obejct with generic VIR_ALLOC().
This loop occurs just after we've assured that all devices that
require a PCI device have been assigned and all necessary PCI
controllers have been added. It is the perfect place to add other
potentially auto-generated PCI controller attributes that are
dependent on the controller's PCI address (upcoming patch).
There is a convenient loop through all controllers at the end of the
function, but the patch to add new functionality will be cleaner if we
first rearrange that loop a bit.
Note that the loop originally was accessing info.addr.pci.bus prior to
determining that the pci part of the object was valid. This isn't
dangerous in any way, but seemed a bit ugly, so I fixed it.
The function that auto-assigns PCI addresses was written with the
hardcoded assumptions that any PCI bus would have slots available
starting at 1 and ending at 31. This isn't true for many types of
controllers (some have a single slot/port at 0, some have slots/ports
from 0 to 31). This patch updates that function to remove the
hardcoded assumptions. It will properly find/assign addresses for
devices that can only connect to pcie-(root|downstream)-port (which
have minSlot/maxSlot of 0/0) or a pcie-switch-upstream-port (0/31).
It still will not auto-create a new bus of the proper kind for these
connections when one doesn't exist, that task is for another day.
In commit 155ca616e, a change was introduced that no longer allowed defining
volumes via XML with a capacity of '0'. Because we check for info.size_arg
to be non-zero, this use-case fails. This patch allows info.size_arg to be
zero if no backing store is specified.
Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Commit id 'ac3ed2085' causes 'virsh nodedev-list --cap net' to fail
on any system without SYSFS_INFINIBAND_DIR (/sys/class/infiniband).
Rather than assume it's there and fail on the attempt to open the
non-existent directory, check if it's there - if not, return
success and move on. Also fix caller to check < 0 upon return.
As reported by Suren Hajyan <shajyan@redhat.com> from run of unit tests
This reverts commit 7b401c3bda.
Until libvirt is able to differentiate whether heads='1' is just a
leftover from previous libvirt or whether that's added by user on
purpose and also whether the domain was started with the support for
qxl's max_outputs, we cannot incorporate this patch into the tree
due to compatibility reasons.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This makes the range and static host array management in
virNetworkDHCPDefParseXML() more similar to what is done in
virNetworkDefUpdateIPDHCPRange() and virNetworkDefUpdateIPDHCPHost() -
they use VIR_APPEND_ELEMENT rather than a combination of
VIR_REALLOC_N() and separate incrementing of the array size.
The one functional change here is that a memory leak of the contents
of the last (unsuccessful) virNetworkDHCPHostDef was previously leaked
in certain failure conditions, but it is now properly cleaned up.
Bhyve as of r279225 (FreeBSD -CURRENT) or r284894 (FreeBSD 10-STABLE)
supports using UTC time offset via the '-u' argument to bhyve(8). By
default it's still using localtime.
Make the bhyve driver use UTC clock if it's requested by specifying
<clock offset='utc'> in domain XML and if the bhyve(8) binary supports
the '-u' flag.
Commit ac3ed20 breaks build on FreeBSD with:
CC util/libvirt_util_la-virnetdev.lo
util/virnetdev.c:2967:1: error: unused function 'virNetDevRDMAFeature' [-Werror,-Wunused-function]
virNetDevRDMAFeature(const char *ifname,
^
So hide virNetDevRDMAFeature function under the #ifdef 'SIOCETHTOOL'
and 'HAVE_STRUCT_IFREQ' section.
Pushed under the build breaker rule.
https://bugzilla.redhat.com/show_bug.cgi?id=1245476
We won't return the errno after commit 0d7f45ae, and
the more clearly error will be set in the code in vircgroup*.
Also We will always report error "Operation not permitted",
because the return is -1.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Move the calls to the respective functions from virNodeParseNode(),
which is executed once for every NUMA node, to
linuxNodeInfoCPUPopulate(), which is executed just once per host.
Keep track of what CPUs belong to the current node while walking
through the sysfs node entry, so we don't need to do it a second
time immediately afterwards.
This also allows us to loop through all CPUs that are part of a
node in guaranteed ascending order, which is something that is
required for some upcoming changes.
Swap out all instances of cpu_set_t and replace them with virBitmap,
which some of the code was already using anyway.
The changes are pretty mechanical, with one notable exception: an
assumption has been added on the max value we can run into while
reading either socket_it or core_id.
While this specific assumption was not in place before, we were
using cpu_set_t improperly by not making sure not to set any bit
past CPU_SETSIZE or explicitly allocating bigger bitmaps; in fact
the default size of a cpu_set_t, 1024, is way too low to run our
testsuite, which includes core_id values in the 2000s.
The new name makes it clear that the returned bitmap contains the
information about which CPUs are online, not eg. which CPUs are
present.
No behavioral change.
If the cpu/present file is not available, we assume that the kernel
is too old to support non-consecutive CPU ids and return a bitmap
with all the bits set to represent this fact. This assumption is
already exploited in nodeGetCPUCount().
This means users of this API can expect the information to always
be available unless an error has occurred, and no longer need to
treat the NULL return value as a special case.
The error message has been updated as well.
The original name was confusing because the function returns the number
of CPUs, not the maximum CPU id. The comment above the function has
been updated to reflect this.
No behavioral changes.
During the recent refactoring/cleanups, a bug has been introduced
that caused all CPUs to be reported as online unless the sysfs
cpu/present file was available.
This commit fixes the fallback code path by building the directory
path passed to virNodeGetCpuValue() correctly.
The scope name, even according to our docs is
"machine-$DRIVER\x2d$VMNAME.scope" virSystemdMakeScopeName would use the
resource partition name instead of "machine-" if it was specified thus
creating invalid scope paths.
This makes libvirt drop cgroups for a VM that uses custom resource
partition upon reconnecting since the detected scope name would not
match the expected name generated by virSystemdMakeScopeName.
The error is exposed by the following log entry:
debug : virCgroupValidateMachineGroup:302 : Name 'machine-qemu\x2dtestvm.scope' for controller 'cpu' does not match 'testvm', 'testvm.libvirt-qemu' or 'machine-test-qemu\x2dtestvm.scope'
for a "/machine/test" resource and "testvm" vm.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1238570
Few parts of the code looked at the current progress of and assumed that
a two phase blockjob is in the _READY state as soon as the progress
reached 100% (info.cur == info.end). In current versions of qemu this
assumption is invalid and qemu exposes a new flag 'ready' in the
query-block-jobs output that is set to true if the job is actually
finished.
This patch adds internal data handling for reading the 'ready' flag and
acting appropriately as long as the flag is present.
While this still doesn't fix the virsh client problem with two phase
block jobs and the --pivot option, it at least improves the error
message:
$ virsh blockcommit --wait --verbose vm vda --base vda[1] --active --pivot
Block commit: [100 %]error: failed to pivot job for disk vda
error: internal error: unable to execute QEMU command 'block-job-complete': The active block job for device 'drive-virtio-disk0' cannot be completed
to
$ virsh blockcommit --wait --verbose VM vda --base vda[1] --active --pivot
Block commit: [100 %]error: failed to pivot job for disk vda
error: block copy still active: disk 'vda' not ready for pivot yet
Adding functionality to libvirt that will allow
it query the interface for the availability of RDMA and
tx-udp_tnl-segmentation Offloading NIC capabilities
Here is an example of the feature XML definition:
<device>
<name>net_eth4_90_e2_ba_5e_a5_45</name>
<path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path>
<parent>pci_0000_08_00_1</parent>
<capability type='net'>
<interface>eth4</interface>
<address>90:e2:ba:5e:a5:45</address>
<link speed='10000' state='up'/>
<feature name='rx'/>
<feature name='tx'/>
<feature name='sg'/>
<feature name='tso'/>
<feature name='gso'/>
<feature name='gro'/>
<feature name='rxvlan'/>
<feature name='txvlan'/>
<feature name='rxhash'/>
<feature name='rdma'/>
<feature name='txudptnl'/>
<capability type='80203'/>
</capability>
</device>
Currently, build fails on FreeBSD with:
CC libvirt_driver_la-nodeinfo.lo
nodeinfo.c:1941:56: error: use of undeclared identifier 'SYSFS_SYSTEM_PATH'
const char *prefix = sysfs_prefix ? sysfs_prefix : SYSFS_SYSTEM_PATH;
^
1 error generated.
This is caused by commit b97b3048 that added sysfs_prefix to
nodeCapsInitNUMA and used SYSFS_CPU_PATH.
Fix it by unconditionally defining SYSFS_CPU_PATH instead of defining it
under #ifdef __linux__.
If one calls update-device with information that is not updatable,
libvirt reports success even though no data were updated. The example
used in the bug linked below uses updating device with <boot order='2'/>
which, in my opinion, is a valid thing to request from user's
perspective. Mainly since we properly error out if user wants to update
such data on a network device for example.
And since there are many things that might happen (update-device on disk
basically knows just how to change removable media), check for what's
changing and moreover, since the function might be usable in other
drivers (updating only disk path is a valid possibility) let's abstract
it for any two disks.
We can't possibly check for everything since for many fields our code
does not properly differentiate between default and unspecified values.
Even though this could be changed, I don't feel like it's worth the
complexity so it's not the aim of this patch.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1007228
After upgrade to perl-5.22.0, it started complaining about one of our
scripts. The thing is that even though it works, it wants all curly
brackets escaped properly. The change is not functional, it merely gets
rid of the following error:
Unescaped left brace in regex is deprecated, passed through in regex;
marked by <-- HERE in m/^enum { <-- HERE / at -e line 3.
There is one more error like this that I'm getting, but it is because of
GNU automake bug #21001:
https://debbugs.gnu.org/cgi/bugreport.cgi?bug=21001
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Allows to specify maximum number of head to QXL driver.
Actually can be a compatiblity problem as heads in the XML configuration
was set by default to '1'.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Currently, when trying to virsh pool-define/virsh pool-build a new
'dir' pool, if the target directory already exists, virsh
pool-build/virStoragePoolBuild will error out. This is a change of
behaviour compared to eg libvirt 1.2.13
This is caused by the wrong type being used for the dir_create_flags
variable in virStorageBackendFileSystemBuild , it's defined as a bool
but is used as a flag bit field so should be unsigned int (this matches
the type virDirCreate expects for this variable).
This should fix https://bugzilla.gnome.org/show_bug.cgi?id=752417 (GNOME
Boxes) and https://bugzilla.redhat.com/show_bug.cgi?id=1244080
(downstream virt-manager).
The auto-spawn code would originally attempt to spawn the
daemon for both ENOENT and ECONNREFUSED errors from connect().
The various refactorings eventually lost this so we only
spawn the daemon on ENOENT. The result is if the daemon exits
uncleanly, so that the socket is left in the filesystem, we
will never be able to auto-spawn the daemon again.
Resolving an error reporting bug introduced by commit id '761491e' which
just took the return of virStorageBackendRBDCreateImage and used it as
the basis for the message generated. This would generate EPERM regardless
of error seen.
We used to look at the librbd code version and depending on that
we would invoke rbd_create3() or rbd_create().
Since librbd version 0.67.9 we can however tell RBD that it should
create rbd format 2 images even if we invoke rbd_create().
The less options we pass to librbd, the more we can lean on the sane
defaults it uses.
For rbd_create3() we had things like the stripe count and unit hardcoded
in libvirt and that might cause problems down the road.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
For s390-ccw-virtio machines the default bus type is set to ccw.
Specifing an address element allows to override the default.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@us.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Adding the recently in qemu added 9pfs support for virtio-ccw.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@us.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
If we are migrating to an UNIX socket, we accept() a connection
from qemu and use that FD to set up a tunnel. However, the FD is
not closed as often as it should be.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Make sure sysfs_prefix, when present, is always the first argument
to a function; don't use a different name to refer to it; check
whether it is NULL, and hence SYSFS_SYSTEM_PATH should be used, only
when using it directly and not just passing it down to another
function; always pass down the same value we've been passed when
calling another function.
In commit 641a145d73 I've added code that
resets the balloon memory value to full size prior to resuming the vCPUs
since the size certainly was not reduced at that point.
Since qemuProcessStart is used also in code paths with already booted
up guests (migration, save/restore) the assumption is not entirely true
since the guest might already been running before.
This patch adds a function that queries the monitor rather than using
the full size since a balloon event would not be reissued in case we are
recovering a saved migration state.
Additionally the new function is used also when reconnecting to a VM
after libvirtd restart since we might have missed a few balloon events
while libvirtd was not running.
https://bugzilla.redhat.com/show_bug.cgi?id=1232663
In one of my previous ptaches (bcd9a564) I've tried to fix the problem
that we blindly assumed strict NUMA mode for guests. This led to
several problems like us pinning a domain onto a nodeset via libnuma
among with CGroups. Once the nodeset was changed by user, well, it did
not result in desired effect. See the original commit for more info.
But, the commit I wrote had a bug: when NUMA parameters are changed on
a running domain we require domain to be strictly pinned onto a
nodeset. Due to a typo a condition was mis-evaluated.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The comment above that function says: "This function can be a lot more
exhaustive, ...", so let's be.
Check for collisions between routes in the system and static routes
being added explicitly from the <route/> element of the network XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1094205
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch resolves a situation where a core is defective and is not
in the present mask during boot. Optionally a host can have empty sockets
could be brought online if the socket is added. In this case the present
mask contains the cpu's that are actually there in the sockets even though
they might be offline for some reason. This patch excludes the cpu's that
are offline because the socket is defective/empty by checking the present
mask before reading the cpu directory. Otherwise, the nodeinfo on such
hosts always displays wrong output which includes the defective/empty
sockets as set of offline cpu's.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
Add the sysfs_prefix argument to the call to allow for setting the
path for tests to something other than SYSFS_CPU_PATH which is a
derivative of SYSFS_SYSTEM_PATH
Use cpupath for nodeCapsInitNUMAFake and remove SYSFS_CPU_PATH
The API will print the path to the /cpu/present file using the sysfs_prefix.
NB: This is setup for future patches which will allow local/test sysfs paths.
After Jirka's migration patches libvirt is listening on migration
events from qemu instead of actively polling on the monitor. There is,
however, a little regression (introduced in 6d2edb6a42). The
problem is, the current status of migration job is updated in
qemuProcessHandleMigrationStatus if and only if migration job was
started. But eventually every asynchronous job may result in
migration. Therefore, since this job is not strictly a
migration job, internal state was not updated and later checks failed:
virsh # save fedora22 /tmp/fedora22_ble.save
error: Failed to save domain fedora22 to /tmp/fedora22_ble.save
error: operation failed: domain save job: is not active
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 45697fe5 added dom0 to driver->domains, but missed
setting its state to 'running'
$ virsh list
Id Name State
----------------------------------------------------
0 Domain-0 shut off
We create a virtual network of special type, which
has the same name as bridge name to create bridged
network adapter in vz. So when we delete such an
adapter we have to remove corresponding virtual
network.
So let's rename prlsdkDelNet to prlsdkCleanupBridgedNet
and don't check for return value.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
When QEMU exits on destination during migration, the source reports
either success (if the failure happened at the very end) or unhelpful
"unexpectedly failed" error message. However, the Finish API called on
the destination may report a real error so let's use it instead of the
generic one.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virDomainMigrateFinish* APIs were unfortunately designed to return the
pointer to the domain on destination and NULL on error. This looks OK in
normal cases but the same API is also called when we know migration
failed and thus we expect Finish to return NULL even if it actually did
all it was supposed to do without any error. The call is defined to
return nonnull domain pointer over RPC, which means returning NULL will
always result in an error being send. If this was not in fact an error,
the API itself wouldn't set anything to the thread local virError, which
makes the RPC layer come up with it's own "Library function returned
error but did not set virError" error.
This is quite confusing and also hard to detect by the caller. This
patch adds a special error code which can be used to check that Finish
successfully aborted migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If QEMU fails during incoming migration, the domain disappears including
a possibly useful error message read from QEMU log file. Let's remember
the error in virQEMUDriver so that Finish can report more than just "no
such domain".
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This is a self-locking wrapper around virHashTable. Only a limited set
of APIs are implemented now (the ones which are used in the following
patch) as more can be added on demand.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
With commit 3f9868a virt-aa-helper stopped working due to missing
DomainGuest in the caps.
The test with -c without arch also needs to be
removed since the new capabilities code uses the host arch when none is
provided.
Initializing libvirt log in virt-aa-helper and getting it to output
libvirt log to stderr. This will help debugging problems happening in
libvirt functions called from within virt-aa-helper
Daemon used false logic for determining whether there were any clients.
When the timer was inactive, it was activated if at least one of the
servers did not have clients. So the bool was being flipped there and
back all the time in case there was one client, for example.
Initially introduced by fa14207368.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1240283
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
