All QEMU versions we support have these and it's very unlikely that they
will be removed. Remove the capability checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All modern qemus support sandboxing so this is covered by other tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The feature is supported by all supported qemu versions thus covered
thoroughly by other test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test is now pointless since we always assume that this option is
present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMU versions have all the fields so we can remove the
booleans controlling which fields are used on the monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
They are no longer used as we now assume that all tuning caps are
present and in case some will be removed we'll need to use different
probing methods.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make it more obvious that we care about passing FDs on the commandline
before startup of qemu, which is used to avoid startup monitor polling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming commit will always add the property so the negative tests would
stop working.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add g_autofree to functions changed in previous commits doing
g_auto cleanup for libxml2-related variables, where it could
lead to removal of a label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Libvirt assumes that a SCSI bus can fit up to 8 devices
(including controller itself), except for so called wide bus
which can accommodate up to 16 devices (again, including
controller). This plays important role when computing 'drive'
address in virDomainDiskDefAssignAddress(). So far, the only
driver that enables wide SCSI bus is VMX. But with newer
releases, ESX is capable of "super wide" bus (64 devices).
We can blindly bump the limit in our code because then we would
compute address that's invalid for older ESX versions that we
still want to support.
Unfortunately, I haven't found a better place where to store this
than virDomainDef.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is an attachment from the following bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1738392
Notice that .vmx file has two scsi disks, but only one is
reported in the XML. This will be fixed later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing for the 'qemuMonitorTest' object and the
list of keys so that the cleanup section can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unfortunately, mdevctl supports defining more than one mdev with the
same UUID as long as they have different parent devices. (Only one of
these devices can be active at any given time).
This means that we can't use the UUID alone as a way to uniquely
identify mdev node devices. Append the parent address to ensure
uniqueness. For example:
Before: mdev_88a6b868_46bd_4015_8e5b_26107f82da38
After: mdev_88a6b868_46bd_4015_8e5b_26107f82da38_0000_00_02_0
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1979440
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This can be used similarly to other postparse callbacks in libvirt --
filling in additional information that can be determined by using the
information provided in the XML. In this case, we determine the address
of the parent device and cache it in the mdev caps so that we can use it
for generating a unique name and interacting with mdevctl.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
At the moment, this is only for mediated devices. When a new mediated
device is created or defined, the xml is expected specify the nodedev
name of an existing device as its parent. We were not previously
validating this and were simply accepting any string here.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 51fbbfdce8 attempted to get the proper nodedev name for the
parent of an defined mdev by traversing the filesystem and looking for a
device that had the appropriate sysfs path. This works, but it would be
cleaner to to avoid mucking around in the filesystem and instead just
just examine the list of devices we have in memory.
We already had a function nodeDeviceFindAddressByName() which constructs
an address for parent device in a format that can be used with mdevctl.
So if we refactor this function into a a function that simply formats an
address for an arbitrary virNodeDeviceObj*, then we can use this
function as a predicate for our new virNodeDeviceObjListFind() function
from the previous commit. This will search our list of devices for one
whose address matches the address we get from mdevctl.
One nice benefit of this approach is that our test cases will now
display xml output with the proper parent name for mdevs (assuming that
we've added the appropriate mock parent devices to the test driver).
Previously they just displayed 'computer' for the parent because the
alternative would have required specially constructing a mock filesystem
environment with a sysfs that mapped to the appropriate parent.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
VIR_APPEND_ELEMENT doesn't report any errors now so we can remove
VIR_APPEND_ELEMENT_QUIET and replace all uses by VIR_APPEND_ELEMENT
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virAppendElement instead of virInsertElementsN to implement
VIR_APPEND_ELEMENT which allows us to remove error handling as the
only relevant errors were removed when switching to aborting memory
allocation functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now it was an alias to VIR_APPEND_ELEMENT. Use virAppendElement
directly until VIR_APPEND_ELEMENT is refactored too and we'll be able to
get rid of VIR_APPEND_ELEMENT_QUIET completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virAppendElement instead of virInsertElementsN to implement
VIR_APPEND_ELEMENT_COPY which allows us to remove error handling as the
only relevant errors were removed when switching to aborting memory
allocation functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are cpu definitions that are allocated in
qemuTestDriverInit() but are missing corresponding
virCPUDefFree() call in qemuTestDriverFree(). It's safe to call
the free function because the definitions contain a refcounter
and thus even if they were still in use the refcounter would be
just decreased.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting with QEMU 6.0, this controller is enabled by default
on aarch64.
https://bugzilla.redhat.com/show_bug.cgi?id=1967187
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to test the virDomainGetMessages for test driver, we need to
check some taints or deprecations, so introduce testDomainObjCheckTaint
for checking taints.
As we introduced testDomainObjCheckTaint for test driver, the `dominfo`
command in virshtest will now print tainting messages, so add them for
test.
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In virTestMain() the @failedTests bitmap is allocated and
optionally @testBitmap too. But neither of them is freed.
Fixes: 0cd5a726e3
Fixes: cebb468ef5
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to pass the 'trim' requests through the copy-on-read filter so
if a user configures a discard policy on the disk the requests get
through to the appropriate format layer in the blockdev tree.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1986509
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
I've noticed the test being skipped in my build scenario (tmpfs) and
the output doesn't make it clear why it's happening.
Add debug statements for the various return values of
testUserXattrEnabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Base it on the presence of the "blockdev-reopen" QMP command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Export 'qemuBlockReopenFormatMon' and use it in a new test case wich
will validate the arguments against the QMP schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Update to v6.1.0-rc0-48-g7b7ca8ebde
Notable changes are:
- stabilization of 'blockdev-reopen'
- addition of the 'vmx-tsc-scaling' cpu flag
- Supported display types are now in the schema only if they are compiled in.
- rbd image encryption
- 'aio-max-batch' iothread property
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add support for customizable grabToggle key combinations with
<input type='evdev'>.
Signed-off-by: Justin Gatzen <justin.gatzen@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit e9b534905f introduced an error when parsing an empty list
returned from mdevctl.
This occurs e.g. if nodedev-undefine is used to undefine the last
defined mdev which causes the following error messages
libvirtd[33143]: internal error: Unexpected format for mdevctl response
libvirtd[33143]: internal error: failed to query mdevs from mdevctl:
libvirtd[33143]: mdevctl failed to updated mediated devices
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
It is actually not needed because in qemuxml2argvtest we preload
domaincapsmock as well.
Reported-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We need to mock virQEMUCapsGetKVMSupportsSecureGuest only if compiling
with QEMU otherwise compilation will fail with error:
/usr/lib/gcc/i686-w64-mingw32/11.1.1/../../../../i686-w64-mingw32/bin/ld: tests/libdomaincapsmock.dll.p/domaincapsmock.c.obj: in function `virQEMUCapsGetKVMSupportsSecureGuest':
/builds/libvirt/libvirt/build/../tests/domaincapsmock.c:40: undefined reference to `virQEMUCapsGet'
/usr/lib/gcc/i686-w64-mingw32/11.1.1/../../../../i686-w64-mingw32/bin/ld: /builds/libvirt/libvirt/build/../tests/domaincapsmock.c:41: undefined reference to `virQEMUCapsGet'
Fixes: 248a30c0c0
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I have added 2 new macros to call tests which are expected to
fail in order to make the code more consistent and readable.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Having negation in a name of a bool variable seems a bit
confusing to me. I think the substitution makes the code much
more readable.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the common id 'lsec0' for all launchSecurity types in the QEMU
command line construction.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Adding availability of s390-pv in domain capabilities and adjust tests.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
