The high-bandwidth memory (HBM) in cache mode might be greater than
UINT_MAX of cache per NUMA node, so change to unsigned long long.
Signed-off-by: Lin Yang <lin.a.yang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically, we had no idea whether the qemu-ga running inside
the guest was running or not. Or whether it crashed in the middle
of reading of a command. That's why we issued guest-sync prior
any intended command, to make the agent flush any partially read
JSON and reset its state machine.
But with VSERPORT_CHANGE event we know when the guest agent
(dis-)connects and thus can issue the sync command just once for
each 'connection'. Whether the agent is synced is tracked in
agent->inSync member, which used to be set to true upon
successful sync. But after rework in v8.0.0-rc1~361 that line is
gone, leaving us with using the historic approach basically.
Fixes: cad84fd51e
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As some qemxml2argvtest cases were removed, we forgot to remove
their expected output counterparts.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The privatedata.rng file was accidentally left uninstalled, but it's
referenced by other schema files effectively breaking validation of XMLs
in new installations.
Change to libvirt.spec is not needed as we include all installed schemas
via a wildcard.
Fixes: d8ceacdc87
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Prior to firewalld version 1.0.0, the default action of ACCEPT in the
"libvirt" zone (subsequently overridden with a lower priority "REJECT"
action) would result in an implicit rule that allowed incoming sessions
through the zone; libvirt relied on this implicit rule to permit
incoming connections to guests that were connected via a libvirt
"routed" network.
Starting in firewalld 1.0.0, the rules generated for this same
zonefile changed such that incoming sessions through the libvirt zone
were no longer allowed, breaking the longstanding convention that they
should be allowed (only for routed networks).
However, beginning with firewalld 0.9.0, a zone can explicitly
allow/block forwarded traffic (by adding a "policy" to the zone that
specifies what happens to packets that are going in one zone and out
another zone).
This patch changes the zone for routed networks from "libvirt" to the
newly-added "libvirt-routed" zone that uses the new policy
functionality to once again allow incoming sessions to guests on
routed networks.
(If firewalld is < 0.9.0, then the policy file won't be read at all,
so firewalld won't log any error, and libvirt will just use the old
setup that takes advantage of the implicit forwarding rules).
Resolves: https://bugzilla.redhat.com/2055706
Signed-off-by: Eric Garver <eric@garver.life>
Reviewed-by: Laine Stump <laine@redhat.com>
This zone will be used for the routed network by default.
Note that this zone definition omits "forward" aka intra-zone
forwarding, because it requires firewalld >= 0.9.0.
Signed-off-by: Eric Garver <eric@garver.life>
Reviewed-by: Laine Stump <laine@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.12.0-rc0~148^2~4 the .align
attribute of memory-backend-file is always available for all QEMU
versions we support (4.2.0, currently). Therefore, we can assume
the capability is always set and thus doesn't need to be checked
for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.11.0-rc0~95^2~9 the .discard
attribute of memory-backend-file is always available for all QEMU
versions we support (4.2.0, currently). Therefore, we can assume
the capability is always set and thus doesn't need to be checked
for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.1.0-rc0~41^2~26 only for Linux,
and later in v3.1.0-rc0~71^2~10 for all POSIX, the
memory-backend-file is going to be present for all QEMU versions
we support (4.2.0, currently). Therefore, we can assume the
capability is always set and thus doesn't need to be checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.1.0-rc0~41^2~104 the
memory-backend-ram is going to be present for all QEMU versions
we support (4.2.0, currently). Therefore, we can assume the
capability is always set and thus doesn't need to be checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim of this test case it to make sure we error out when
QEMU_CAPS_OBJECT_MEMORY_RAM is missing. Well, it's never going to
be missing. Drop the test case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, we have maybe a dozen tests for hugepages related stuff in
qemuxml2xmltest. In all cases DO_TEST() is used, which means we have to
enumerate all capabilities needed (though, it's usually just
QEMU_CAPS_OBJECT_MEMORY_RAM and QEMU_CAPS_OBJECT_MEMORY_FILE,
exceptionally QEMU_CAPS_DEVICE_PC_DIMM too).
Instead of deleting the caps flags one-by-one, just switch the
tests to use DO_CAPS_LATEST().
Since some of our expected output files are just a symlink to their
respective input files, these are changed too. But from QEMU's
POV nothing changes as no .args file is changed.
Oh, and I'm also adding a 'hugepages-memaccess3' test case, which
was missing, surprisingly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, we have maybe a dozen tests for hugepages related
stuff in qemuxml2argvtest. In all cases DO_TEST() is used, which
means we have to enumerate all capabilities needed (though, it's
usually just QEMU_CAPS_OBJECT_MEMORY_RAM and
QEMU_CAPS_OBJECT_MEMORY_FILE, exceptionally
QEMU_CAPS_OBJECT_MEMORY_FILE_DISCARD too).
Instead of deleting the caps flags one-by-one, just switch the
tests to use DO_CAPS_LATEST().
The qemuxml2xmltest will undergo similar treatment in next
commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
AMX was introduced in QEMU commit 1f16764f7d4515bfd5e4ae0aae814fa280a7d0c8.
Signed-off-by: Lin Yang <lin.a.yang@intel.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The g_slist_free_full() function is perfectly capable of handling
NULL (in which case it's NOP), therefore there's no need to check
passed pointers for NULL. We have them though in couple of
places. Drop them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Glib can internally convert only unix timestamps up to
9999-12-31T23:59:59 (253402300799). Validate that the user doesn't use
more than that as otherwise we cause an assertion failure:
(process:1183396): GLib-CRITICAL **: 14:25:00.906: g_date_time_format: assertion 'datetime != NULL' failed
Additionally adjust the schema to allow bigger values as we use
'unsigned long long' to parse the value.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2128993
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The index page only really makes sense for the top level directory. The
specific index files are unreferenced since last commit. Drop them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fix the main links in docs.rst main page to go to the full docs rather
than prompting one more click to the index page.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When building the top level description from a header file the
'parseTopComment' method of the 'CParser' would include all trailing
lines into the <description> field. This was designed to concatenate
multi-line descriptions, but unfortunately in all cases also included
the Copyright statement which followed.
Explicitly end the scanning of the header on a line which starts with
'Copyright (C)' and truncate the spaces from the end of the last item.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The LXC module has no exported 'Types' but the XSL template which
generates the 'libvirt-libvirt-lxc.html' page would try to format it
anyways. This would result in an empty non-pair version of the '<pre>'
tag to be used in the page, which didn't render well with modern
browsers for some reason. All following sections would become children
of the non-pair <pre>.
Fix the XSL template to not generate empty 'Types' or 'Functions'
sections similarly to how we do with 'Macros'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The template is unused since commit 9092c3d491
Remove also the up|right|left|home.png files which were only used by
code generated by the unused template.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce an internal schema for a single device and use it to test the
various files in tests/qemuhotplugtestdevices and
tests/qemublocktestdata directories.
This also requires us to implement schema for (some) privateData bits
for the disk source.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Libvirt internally (e.g. in the status XML) stores additional data for
various objects described by the XML. The data is usually stored in
<privateData> or similar sub-elements.
This patch adds possibility for internal schema files to describe the
<privateData> elements by schema while still disallowing them for the
public schema.
This patch adds definitions for private data of <disk> and the
corresponding storage source of a disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'cputestdata' directory has a collection of XML files with very
complicated naming schemes for various input and output XML files.
Rather than trying to write complex regexes for selecting specific files
which diverged already multiple times we can introduce an internal
schema file which will cover all of the 3 top level elements used in the
XML files.
Schema for <cpu> is taken from our main RNG schema, <cpuTest> is just a
collection of <cpu> elements, and finally <cpudata> is a simple enough
to describe inline.
To keep the validator happy we have to generate the schema file to
place full paths for the included documents.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In a rare case when virHashAddEntry fails we would just leak the
structure we wanted to add to the hash table.
Fixes: e89acdbc3b
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virDomainEventTunableNew is supposed to consume and free @params, but it
failed to always set @params to NULL to make sure the caller doesn't try
to free the same memory again.
Fixes: d95c79fbd0
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Trying to parse <driver> node which does not exist makes no sense.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The %{release} part of the requirement is just wrong as python bindings
are not rebuilt anytime libvirt release is increased, which means the
client-qemu package may require nonexistent release of python bindings.
The %{version} part is not wrong, but it's too strict for no reason as
the virt-qemu-qmp-proxy script will work happily even with ancient
python bindings. And since all distros supported by libvirt.spec already
contain python3-libvirt, we can depend on the first package called this
way.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Rename 'diskTarget' to 'diskTargetDev' and then 'target' to
'diskTarget'.
This will make it less confusing when overriding the definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The XML does not conform to the RNG schema as we don't yet expose the
'ssh' protocol officially. Mark the XML as invalid by renaming it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'reservations' element doesn't have an 'enabled' attribute according
to our schema, remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'abs_top_srcdir' can be prepended to the schema in the macro. Apart from
removing one needless string copy it will also allow pointing to schema
files in the builddir which will come handy in upcoming patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic freeing of the validator context to remove
'ret'/'cleanup:'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We no longer support HMP-only qemus. Remove the leftover attribute from
the test files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
