Adding 'save' ACL to REMOTE_PROC_NODE_DEVICE_DEFINE_XML to make
REMOTE_PROC_NODE_DEVICE_UPDATE ACLs meaningful.
Fixes: 69f9e7dbc2
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On Fedora 41, bash-completion's .pc file moved to
`bash-completion-devel`.
Using `pkgconfig()` lets us handle this without distro version checks
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Regenerate the ci files using the latest libvirt-ci:
commit face9746f9729699ae8525ffac4ee19be82c1ba5
ci: drop update-alternatives for opensuse tumbleweed
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
There are two memleaks inside of nodedevmdevctltest:
1) In the testCommandDryRunCallback() - when appending lines to
stdinbuf the pointer is overwritten without freeing the old
memory it pointed to.
2) In testMdevctlModify() the livecmd variable is reused and
since its marked as g_autoptr() the first use leaks.
Fixes: 582f27ff15
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Make sure that they're entirely contained within a single line
and that punctuation is used in a way that doesn't make the
resulting HTML look weird.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Address several oddities, and bring them in line with the style
used for the vast majority of our documentation. In a couple of
cases, some of the possible values for an attribute were listed
with :since: information matching that off the attribute itself,
making it redundant.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tweak things so that the required kernel version is still
listed, just not as part of the :since: tag.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These either mention libvirt explicitly, which is something
that we generally don't do, or lack the word "since", which
makes the resulting HTML awkward.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's unclear why the conversion process decided to insert
them, but they don't seem to do much.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It slipped in during the conversion to reStructuredText.
In one case, part of the preformatted text shouldn't have been
marked as such, so that's addressed too. A spurious opening
parenthesis is dropped as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow to modify a node device by using virNodeDeviceDefineXML() to align
its behavior with other drivers define methods.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Implement the API functions in the node device driver by using mdevctl
modify with the options defined and live.
Instead of increasing the minimum mdevctl version to 1.3.0 in the spec
file to ensure support exists in mdevctl the support is dynamically
checked before using mdevctl.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A public API method which allows to update or modify objects is
implemented for almost all other objects that have a concept of
persistent definition and activatability. Currently node devices of type
mdev can be persistent and active. This new method allows to update
defined and active node devices as well.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 26136e3 allowed to use option all with option tree but did not
update the manpage.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we can filter persistent and transient node devices in
virConnectListAllNodeDevices(), add these switches also to the
virsh nodedev-list command.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow to filter node devices based on their persistent or transient
states.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow to dump the XML of the persistent mdev when the mdev has been
started instead of the current state only.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The configuration of a defined mdev can be modified after the mdev is
started. The defined configuration and the active configuration can
therefore run out of sync. Handle this by storing the modifiable data
which is the mdev type and attributes in two separate active and
defined configurations. mdevctl supports with callout scripts to do an
attribute retrieval of started mdevs which is already implemented in
libvirt.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor attribute handling code into methods for easier reuse.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Create a new structure holding type and attributes as these are
modifiable in a persistent mdev configuration and run out of sync with
the active mdev configuration.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Similar to when actual data is being written to the stream, it is
necessary to acknowledge handling of the client request when a hole is
encountered. This is done later in daemonStreamHandleWrite by sending a
fake zero-length reply if the status variable is set to
VIR_STREAM_CONTINUE. It seems that setting status from the message
header was missed for holes in the introduction of the sparse stream
feature.
Signed-off-by: Vincent Vanlaer <libvirt-e6954efa@volkihar.be>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This new test case checks whether we are handling NVDIMMs
correctly when checking for overlapping memory devices (see
previous commit). Without previous commit, this test case would
fail, yet it was produced in real life (at least the NVDIMM
part) and thus it is valid.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
As of v9.8.0-rc1~7 we check whether two <memory/> devices don't
overlap (since we allow setting where a <memory/> device should
be mapped to). We do this pretty straightforward, by comparing
start and end address of each <memory/> device combination.
But since only the start address is given (an exposed in the
XML), the end address is computed trivially as:
start + mem->size * 1024
And for majority of memory device types this works. Except for
NVDIMMs. For them the <memory/> device consists of two separate
regions: 1) actual memory device, and 2) label.
Label is where NVDIMM stores some additional information like
namespaces partition and so on. But it's not mapped into the
guest the same way as actual memory device. In fact, mem->size is
a sum of both actual memory device and label sizes. And to make
things a bit worse, both sizes are subject to alignment (either
the alignsize value specified in XML, or system page size if not
specified in XML).
Therefore, to get the size of actual memory device we need to
take mem->size and substract label size rounded up to alignment.
If we don't do this we report there's an overlap between two
NVDIMMs even when in reality there's none.
Fixes: 3fd64fb0e2
Fixes: 91f9a9fb4f
Resolves: https://issues.redhat.com/browse/RHEL-4452?focusedId=23805174#comment-23805174
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
VIR_CLOSE() sets errno on failure so it's better to use
virReportSystemError() than plain virReportError() as the former
reports errno value too.
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current implementation sets the guest-sync timeout to the
smaller value between the default value (QEMU_AGENT_WAIT_TIME)
and agent->timeout, without considering the timeout passed
via the qga command.
This patch enhances the guest-sync timeout logic to use the
minimum value among the default value, agent->timeout, and
the timeout passed via the qga command.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/590
Signed-off-by: ray <honglei.wang@smartx.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the assumption from the code pre-creating the storage to
qemuMigrationDstPrepareStorage where it's checked for other cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Migrating into a 'directory' won't ever work as we ask qemu to emulate a
fat filesystem, so restoring of the files won't be possible. Same for
'vhost-user' disks which don't support blockjobs as there's no block
backend used in qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Check the existance of storage per-type rather than trying to come up
with a common "path".
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have a switch statement, the code adding the 'slice' for
block devices of non-equal sizes can be moved to appropriate location.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Automatically free helper variables, remove the 'cleanup' label and
use virBufferCurrentContent() to take the XML from the buffer rather
than extracting it to a separate variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow storage migration of VDPA devices by properly checking that they
exist on the destionation. Pre-creation is not supported but if the
device exists the migration should be able to succeed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Decrease the likelyhood that addition of a new storage type will be
forgotten.
This patch also unifies the type check to consult the 'actual' type of
the storage in both cases as the NVMe check looked for the XML declared
type while virStorageSourceIsLocalStorage() looks for the
actual/translated type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Previously, the script would only detect differences between
libvirt's and qemu's list of x86 features, adding those features
to libvirt was a manual and error prone procedure.
Replace with a script that can generate libvirt's feature list
directly from qemu source code.
Usage: sync_qemu_features_i386.py [--output OUTPUT] [qemu]
If not specified otherwise, "output" defaults to x86_features.xml
in the same directory as sync_qemu_features_i386.py. If a checkout
of the qemu source code resides next to the libvirt directory, it
will be found automatically and need not be specified.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use "0x%08x" as format for all values:
sed \
-e "s/'0x\(..\)'/'0x000000\\1'/g" \
-e "s/'0x\(...\)'/'0x00000\\1'/g"
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
