Remove the setting since it's unused as of commit 34364df3 which should
have never copied it in from the old code which ended up getting removed
as part of commit c7c286c6.
This commit primes vboxAttachDrives for further changes so when they
are made, the diff is less noisy:
* move variable declarations to the top of the function
* add disk variable to replace all the def->disks[i] instances
* add cleanup at the end of the loop body, so it's all in one place
rather than scattered through the loop body. It's purposefully
called 'cleanup' rather than 'skip' or 'continue' because future
commit will treat errors as hard-failures.
Previously, the driver was computing VBOX's devicePort/deviceSlot values
based on device name and max port/slot values. While this worked, it
completely ignored <address> values. Additionally, libvirt's built-in
virDomainDiskDefAssignAddress already does a good job setting default
values on virDomainDeviceDriveAddress struct which we can use to set
devicePort and deviceSlot and accomplish the same result while allowing
the customizing those via XML. Also, this allows to remove some code
which will make further patches smaller.
When registering a VM we call OpenMedium on each disk image which adds it
to vbox's global media registry. Therefore, we should make sure to call
Close when unregistering VM so we cleanup the media registry entries
after ourselves - this does not remove disk image files. This follows
the behaviour of the VBoxManage unregistervm command.
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
When a user provides the backing chain, we will not need to re-detect
all the backing stores again, but should move to the end of the user
specified chain. Additionally if a user provides a full terminated chain
we should not attempt any further detection.
Separate it so that it deals only with single virStorageSource, so that
it can later be reused for full backing chain support.
Two aliases are passed since authentication is more relevant to the
'storage backend' whereas encryption is more relevant to the protocol
layer. When using node names, the aliases will be different.
qemuDomainGetImageIds and qemuDomainStorageFileInit are helpful when
trying to access a virStorageSource from the qemu driver since they
figure out the correct uid and gid for the image.
When accessing members of a backing chain the permissions for the top
level would be used. To allow using specific permissions per backing
chain level but still allow inheritance from the parent of the chain we
need to add a new parameter to the image ID APIs.
Until now we ignored user-provided backing chains and while detecting
the code inherited labels of the parent device. With user provided
chains we should keep this functionality, so label of the parent image
in the backing chain will be applied if an image-specific label is not
present.
Until now we ignored user-provided backing chains and while detecting
the code inherited labels of the parent device. With user provided
chains we should keep this functionality, so label of the parent image
in the backing chain will be applied if an image-specific label is not
present.
virSecuritySELinuxSetImageLabelInternal assigns different labels to
backing chain members than to the parent image. This was done via the
'first' flag. Convert it to passing in pointer to the parent
virStorageSource. This will allow us to use the parent virStorageSource
in further changes.
When the user provides backing chain, we don't need the full support for
traversing the backing chain. This patch adds a feature check for the
virStorageSourceAccess API.
The 'file access' module of the storage driver has few feature checks to
determine whether libvirt supports given storage driver method. The code
to retrieve the driver struct needed for the check is the same so it can
be extracted.
We handle incremental storage migration in a different way. The support
for this new (as of QEMU 2.10) parameter is only needed for full
coverage of migration parameters used by QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We already support several ways of setting migration bandwidth and this
is not adding another one. With this patch we are able to read and write
this parameter using query-migrate-parameters and migrate-set-parameters
in one call with all other parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The parameters used "migrate" prefix which is pretty redundant and
qemuMonitorMigrationParams structure is our internal representation of
QEMU migration parameters and it is supposed to use names which match
QEMU names.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We already support setting the maximum downtime with a dedicated
virDomainMigrateSetMaxDowntime API. This patch does not implement
another way of setting the downtime by adding a new public migration
parameter. It just makes sure any parameter we are able to get from a
QEMU monitor by query-migrate-parameters can be passed back to QEMU via
migrate-set-parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The second CHECK macro was used for string parameters. Let's rename it
to CHECK_STR and move it up to have all checks in one place.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The first CHECK macro in the test is used for checking integer values.
Let's make it a bit more generic to be usable for any numeric type and
use it for a new CHECK_INT macro.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The check can be easily replaced with a simple test in the JSON
implementation and we don't need to update it every time a new parameter
is added.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The macro (now called PARSE_SET) is now usable for any type which needs
a *_set bool for indicating a valid value.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Linux kernel shows our "cmt" feature as "cqm". Let's mention the name in
the cpu_map.xml to make it easier to find.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Some tests require JSON_MODELS to be parsed into qemuCaps and applied
when computing CPU models and such test cannot succeed if QEMU driver is
disabled. Let's mark the tests with JSON_MODELS_REQUIRED and skip the
appropriate parts if building without QEMU.
On the other hand, CPU tests with JSON_MODELS should succeed even if
model definitions from QEMU are not parsed and applied. Let's explicitly
test this by repeating the tests without JSON_MODELS set.
This fixes the build with QEMU driver disabled, e.g., on some
architectures on RHEL/CentOS.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When upgrading libvirt packages, there's no strict ordering for the
installation or removal of the individual libvirt sub packages. Thus
libvirt-daemon may be upgraded (and its %postun scriptlet) started
before all sub packages with driver libraries are upgraded. When
libvirt-daemon's %postun scriptlet restarts the daemon old drivers may
still be laying around and the daemon may crash when it tries to use
them.
Let's restart the daemon in %posttrans to make sure libvirtd is
restarted only after all sub packages are at the same version.
https://bugzilla.redhat.com/show_bug.cgi?id=1464300
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Since vhostuser type is really a tap that is just plugged into
different type of bridge, supporting QoS is trivial.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For instance, NET_TYPE_MCAST doesn't support setting QoS. Instead
of claiming success and doing nothing, we should be explicit
about that and report an error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1427049
Use virStorageBackendCreateVolUsingQemuImg to apply the LUKS information
to the logical volume just created. As part of the processing of the
lvcreate command add 2MB to the capacity to account for the LUKS header
when it's determined that the volume desires to use encryption.
Refactor to extract out the LVCREATE command. This also removes the
need for the local @created since the error path can now only be reached
after the creation of the logical volume.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1490279
Turns out the virStorageBackendVolResizeLocal did not differentiate
whether the target volume was a LUKS volume or not and just blindly
did the ftruncate() on the target volume.
Follow the volume creation logic (in general) and create a qemu-img
resize command to resize the target volume for LUKS ensuring that
the --object secret is provided as well as the '--image-opts' used
by the qemu-img resize logic to describe the path and secret ensuring
that it's using the luks driver on the volume of course.
Since all that was really needed was a couple of fields and building
the object can be more generic, let's alter the args a bit. This will
be useful shortly for adding the secret object for a volume resize
operation on a luks volume that will need a secret object.
Rather than passing just the path, pass the virStorageVolDefPtr as we're
going to need it shortly.
Also fix the order of code and stack variables in the calling function
virStorageBackendVolResizeLocal.
