On EOF, the loop can be terminated right away since most of it is
skipped anyways and the handling of the last command is repeated after
the loop.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The test data for capabilities is obtained from two consecutive qemu
runs when the regular monitor object will be reset. Do the same for the
test monitor object which is not disposed between runs by calling
qemuMonitorResetCommandID.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
qemucapabilitiestest for simplicity uses one test monitor object for
simulating work of two separate inquiries of the qemu process. To allow
better testing in the future it will be required to reset the counter
so that it accurately simulates how qemu would behave.
This patch adds a private monitor API which allows to reset the counter
which will be usable only in tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since virConfGetValueBool() can return earlier, the parameter 'value'
might be not initialised properly inside this method. Another proof:
Valgrind is returning this error during the libvirtd daemon startup:
==16199== Conditional jump or move depends on uninitialised value(s)
==16199== at 0x27FFFEF4: virQEMUDriverConfigLoadFile (qemu_conf.c:809)
==16199== by 0x2807665C: qemuStateInitialize (qemu_driver.c:654)
==16199== by 0x5535428: virStateInitialize (libvirt.c:662)
==16199== by 0x12AED8: daemonRunStateInit (remote_daemon.c:802)
==16199== by 0x536DE18: virThreadHelper (virthread.c:206)
==16199== by 0x6CB36DA: start_thread (pthread_create.c:463)
==16199== by 0x6FEC88E: clone (clone.S:95)
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Formatting of 'driver' already used a separate buffer but was part of
the main function. Separate it and remove bunch of unnecessary temporary
variables.
Note that some checks are removed but they are not really necessary
anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract and refactor the code to use the new approach which allows to
delete a monster condition to check if the element needs to be
formatted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch implements the internal driver API for launch event into
qemu driver. When SEV is enabled, execute 'query-sev-launch-measurement'
to get the measurement of memory encrypted through launch sequence.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The API can be used outside the libvirt to get the launch security
information. When SEV is enabled, the API can be used to get the
measurement of the launch process.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
QEMU >= 2.12 provides 'sev-guest' object which is used to launch encrypted
VMs on AMD platform using SEV feature. The various inputs required to
launch SEV guest is provided through the <launch-security> tag. A typical
SEV guest launch command line looks like this:
-object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 ...\
-machine memory-encryption=sev0 \
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
QEMU uses /dev/sev device while creating the SEV guest, lets add /dev/sev
in the list of devices allowed to be accessed by the QEMU.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The launch-security element can be used to define the security
model to use when launching a domain. Currently we support 'sev'.
When 'sev' is used, the VM will be launched with AMD SEV feature enabled.
SEV feature supports running encrypted VM under the control of KVM.
Encrypted VMs have their pages (code and data) secured such that only the
guest itself has access to the unencrypted version. Each encrypted VM is
associated with a unique encryption key; if its data is accessed to a
different entity using a different key the encrypted guests data will be
incorrectly decrypted, leading to unintelligible data.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The API can be used by application to retrieve the Platform Diffie-Hellman
Key and Platform Certificate chain.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Extend hypervisor capabilities to include sev feature. When available,
hypervisor supports launching an encrypted VM on AMD platform. The
sev feature tag provides additional details like Platform Diffie-Hellman
(PDH) key and certificate chain which can be used by the guest owner to
establish a cryptographic session with the SEV firmware to negotiate
keys used for attestation or to provide secret during launch.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
QEMU version >= 2.12 provides support for launching an encrypted VMs on
AMD x86 platform using Secure Encrypted Virtualization (SEV) feature.
This patch adds support to query the SEV capability from the qemu.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
And replace all calls with virObjectEventStateQueue such that:
remoteEventQueue(priv, event, callbackID);
becomes:
virObjectEventStateQueue(priv->eventState, event, callbackID);
Signed-off-by: Anya Harter <aharter@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1583623
When attaching a virtio-scsi with IOThreads for the config of a
live domain, allow the <address> to not be defined thus allowing
post parse processing to fill in the address. This allows parsing
of an individual device to succeed for attach config.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make the error a bit clearer that virtio-scsi IOThreads require
virtio pci or ccw controller address types.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fix the error message to indicate what exactly is failing - that
the controller index provided matches an existing controller.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit id 1bd5a08d added a call to virXMLFormatElement without
also checking the return status.
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Katerina Koukiou <kkoukiou@redhat.com>
Commit id d8e8b63d introduced the test, but neglected to check for
error from virTestLoadFile in testCompareXMLToDomConfig.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Katerina Koukiou <kkoukiou@redhat.com>
Introduced by commmit id 37bd4571c. Need to goto cleanup and
not return directly.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Katerina Koukiou <kkoukiou@redhat.com>
Commit id '7ef0471bf' added a new parameter to qemuMonitorOpen,
but didn't update the ATTTRIBUTE_NONNULL for the @cb (param 5).
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Katerina Koukiou <kkoukiou@redhat.com>
The @disk was allocated, filled in, and consumed on the normal path,
but for error/cleanup paths it would be leaked. Rename to newHardDisk
and manage properly.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Katerina Koukiou <kkoukiou@redhat.com>
Need to free the allocated hardDiskToOpen array. The contents of the
array are just pointers returned by virVBoxSnapshotConfHardDiskByLocation
and not allocated AFAICT so they don't need to also be freed as well.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Katerina Koukiou <kkoukiou@redhat.com>
xenParsePCI() does a lot of stuff and, in order to make things cleaner,
let's split it in two new functions:
- xenParsePCI(): it's a new function that keeps the old name. It's
responsible for the whole per-PCI logic from the old xenParsePCI();
- xenParsePCIList(): it's basically the old xenParsePCI(), but now it
just iterates over the list of PCIs, calling xenParsePCI() per each PCI.
This patch is basically preparing the ground for the future when
typesafe virConf acessors will be used.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
xenParseXMDisk() does a lot of stuff and, in order to make things
cleaner, let's split it in two new functions:
- xenParseXMDisk(): it's a new function that keeps the old name. It's
responsible for the whole per-disk logic from the old xenParseXMDisk();
- xenParseXMDiskList(): it's basically the old xenParseXMDisk(), but
now it just iterates over the list of disks, calling xenParseXMDisk()
per each disk.
This patch is basically preparing the ground for the future when
typesafe virConf acessors will be used.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add missing data files for bhyve cpu topology tests that should have been
added in b66fda0a74.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
On start up of libvirtd the worker pool of the QEMU driver must be
initialized before trying to reconnect to all the running QEMU
instances. Otherwise segmentation faults can occur if there are QEMU
monitor events emitted.
#0 __GI___pthread_mutex_lock
#1 0x000003fffdba9e62 in virMutexLock
#2 0x000003fffdbab2dc in virThreadPoolSendJob
#3 0x000003ffd8343b70 in qemuProcessHandleSerialChanged
#4 0x000003ffd836a776 in qemuMonitorEmitSerialChange
#5 0x000003ffd8378e52 in qemuMonitorJSONHandleSerialChange
#6 0x000003ffd8378930 in qemuMonitorJSONIOProcessEvent
#7 0x000003ffd837edee in qemuMonitorJSONIOProcessLine
#8 0x000003ffd837ef86 in qemuMonitorJSONIOProcess
#9 0x000003ffd836757a in qemuMonitorIOProcess
#10 0x000003ffd836863e in qemuMonitorIO
#11 0x000003fffdb4033a in virEventPollDispatchHandles
#12 0x000003fffdb4055e in virEventPollRunOnce
#13 0x000003fffdb3e782 in virEventRunDefaultImpl
#14 0x000003fffdc89400 in virNetDaemonRun
#15 0x000000010002a816 in main
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
It was used just temporarily to do a calculation, no need to keep that around.
Also use virBitmap in the code instead of reimplementing two of its existing
functions. And move the counting part next to where the value is read.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It will be used in that file later on, plus it makes sense for all the
implementations to be in same place. Also comment each one of them nicely and
add a comment explaining why they all need to end with the same _LAST value.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is no need to have virResctrlGetInfo() when it must be called after
virResctrlInfoNew() anyway, otherwise it's just an unusable object. When we
wrap the logic inside the New() function we'll save some calls later as well.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move description of the purpose of the file before any definition.
One empty line between related enum definitions.
All typedefs before all structs. This is exception from the usual, but not the
only one, we already have something similar for some other structs. This way we
can move contents between structs and reorder some parts nicely without moving
all definitions of one type before another one just so it's defined.
Define all classes in one place.
Have one initialization function for all classes in the file.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
That way we get rid of the last preprocessor conditional so the code compiles on
all platforms.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We already have virFileLock(), but we are now using flock() in the code as
well (due to requirements for mutual exclusion between libvirt and other
programs using flock() as well), so let's have a function for that as well so we
don't need to have stubs for unsupported platforms in other files.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The default is stable per machine type so there should be no need to keep that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1469338
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For getting the reply I queried the newest and oldest QEMU using
test/qemucapsprobe. From the differences I only extracted the reply to the new
QMP command and discarded the rest. For all the versions below the one which
added support for the new option I used the output from the oldest QEMU release
and for those that support it I used the output from the newest one.
In order to make doubly sure the reply is where it is supposed to be (the
replies files are very forgiving) I added the property to all the replies files,
reran the tests again and fixed the order in replies files so that all the
versions are reporting the new capability. Then removed that one property.
After that I used test/qemucapsfixreplies to fix the reply IDs.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
TSEG (Top of Memory Segment) is one of many regions that SMM (System Management
Mode) can occupy. This one, however is special, because a) most of the SMM code
lives in TSEG nowadays and b) QEMU just (well, some time ago) added support for
so called 'extended' TSEG. The difference to the TSEG implemented in real q35's
MCH (Memory Controller Hub) is that it can offer one extra size to the guest OS
apart from the standard TSEG's 1, 2, and 8 MiB and that size can be selected in
1 MiB increments. Maximum may vary based on QEMU and is way too big, so we
don't need to check for the maximum here. Similarly to the memory size we'll
leave it to the hypervisor to try satisfying that and giving us an error message
in case it is not possible.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
