This argument wasn't validated anywhere, neither in the generic
implementation nor in the individual drivers. As a result a call to this
function with a large enough codeset value prior to this change causes
libvirtd to crash.
This happens because all drivers call virKeycodeValueTranslate which
uses codeset as an index to the virKeymapValues array, causing an
out-of-bounds error.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Qemu added reporting of virtio balloon new statistics stat-htlb-pgalloc and
stat-htlb-pgfail since qemu-3.0 commit b7b12644297. The value of
stat-htlb-pgalloc represents the number of successful hugetlb page allocations
while stat-htlb-pgfail represents the number of failed ones. Add this
statistics reporting to libvirt.
To enable this feature for vm, guest kenel >= 4.17 is required because
the exporting hugetlb page allocation for virtio balloon is introduced
since 6c64fe7f.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Replaced all virSaveLastError and virSetError/virFreeError usages to
virErrorPreserveLast and virErrorRestore respectively.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Syed Humaid <syedhumaidbinharoon@gmail.com>
The virDomainGetHostname API is fetching guest information and this may
involve use of an untrusted guest agent. As such its use must be
forbidden on a read-only connection to libvirt.
Fixes CVE-2019-3886
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We copy-and-paste a lot of our docs, as evidenced by the number of
*GetXMLDesc() functions which had the same unusual indentation and
missing capital in the second sentence of the returns paragraph.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 28f8dfdc (1.0.0) added a flag to virDomainGetXMLDesc, but
failed to document its effects. And considering that the
MIGRATABLE flag has been the source of past bugs (CVE-2014-7823,
fixed in commit b1674ad5 (1.2.11), or even cf2d4c60 (1.2.13) where
flag mismatch broke virsh edit), make the wording wishy-washy
enough to discourage using the flag casually, by mentioning that
the resulting XML is more for internal use than for validation
against the schema.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit d2a929d4 (0.9.4) defined virDomainSaveImageGetXMLDesc()'s use
of @flags as a subset of virDomainXMLFlags, documenting that 2 of the
3 flags defined at the time would never be valid. Later, commit
28f8dfdc (1.0.0) introduced a new flag, VIR_DOMAIN_XML_MIGRATABLE, but
did not adjust the save image documentation to declare it as invalid.
Later, commit a67e3872 (3.7.0) blindly copied and pasted the same text
into virDomainManagedSaveGetXMLDesc.
However, since the flag is not accepted as valid by any of the
drivers (remote is just passthrough; and qemu is the only supporting
driver for either API, with support for just VIR_DOMAIN_XML_SECURE),
it is easier to just define an explicit set of supported flags
directly related to the save image API rather than trying to borrow
from live domain API, and risking confusion if even more domain flags
are added later (in fact, I have an upcoming patch that plans to add
a new flag to virDomainGetXMLDesc that makes no sense for saved
images). We may someday decide that saved images need to support the
_MIGRATABLE flag, as it is possible to load a saved image with a
different version of libvirt than the one that created it, but that
can be a separate patch if it is ever needed. Meanwhile, it DOES make
sense to reuse the same flags for SaveImage and for ManagedSave (since
ManagedSave is really just sugar for creating a normal SaveImage in a
location controlled by libvirt instead of by the user).
There is no API or ABI impact (since we purposefully used unsigned int
rather than an enum type in public API, and since the new flag name
carries the same value as the old reused name).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This patch adds a new VIR_MIGRATE_PARAM_BANDWIDTH_POSTCOPY typed
parameter for virDomainMigrate3 and virDomainMigrateToURI3 for setting
maximum post-copy migration bandwidth.
In case the initial VIR_MIGRATE_PARAM_BANDWIDTH_POSTCOPY value turns out
to be suboptimal a new VIR_DOMAIN_MIGRATE_MAX_SPEED_POSTCOPY flag for
virDomainMigrateSetMaxSpeed and virDomainMigrateGetMaxSpeed may be used
to set/get the maximum post-copy migration bandwidth while migration is
already running.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The transition to the ready state is best observed by events as it's
ansynchronous and does not hint users to do polling. As currently only
the qemu driver supports block copy and block commit and the ready state
event was introduced by qemu 1.3 we can fully switch to the new
approach.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The documentation was only referring to a copy job, but in fact any
running blockjob will have the same results.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add documentation that the 'VIR_DOMAIN_BLOCK_COPY_TRANSIENT_JOB' flag
is auto-assumed if the block copy job is started while the VM is
transient and remove the restriction to define the domain when copy
is running.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have this very handy macro called VIR_STEAL_PTR() which steals
one pointer into the other and sets the other to NULL. The
following coccinelle patch was used to create this commit:
@ rule1 @
identifier a, b;
@@
- b = a;
...
- a = NULL;
+ VIR_STEAL_PTR(b, a);
Some places were clean up afterwards to make syntax-check happy
(e.g. some curly braces were removed where the body become a one
liner).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The autostart under session daemon might not behave as you'd
expect it to behave. This patch is inspired by latest
libvirt-users discussion:
https://www.redhat.com/archives/libvirt-users/2018-December/msg00047.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Create a new API that will allow an adjustment of IOThread
polling parameters for the specified IOThread. These parameters
will not be saved in the guest XML. Currently the only parameters
supported will allow the hypervisor to adjust the parameters used
to limit and alter the scope of the polling interval. The polling
interval allows the IOThread to spend more or less time processing
in the guest.
Based on code originally posted by Pavel Hrdina <phrdina@redhat.com>
to add virDomainAddIOThreadParams and virDomainModIOThreadParams.
Modification of those changes to use virDomainSetIOThreadParams
instead and remove concepts related to saving the data in guest
XML as well as the way to specifically enable the polling parameters.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Process the IOThreads polling stats if available. Generate the
output params record to be returned to the caller with the three
values - poll-max-ns, poll-grow, and poll-shrink.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1621910
When users want to update a path to a CDROM they tend to
construct a very minimal XML and feed the API with it. This is
not a good practice as it breaks the assumptions the API is built
on. Most notably, leaving an element out should be treated as a
request for removal of the corresponding setting. Just like
leaving out <bandwidth/> clears out any QoS previously set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
QEMU commit bf1e7140e adds reporting of new balloon statistic to QEMU
2.12. Value represents the amount of memory that can be quickly
reclaimed without additional I/O. Let's add that too.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1598087
We are mentioning the positive outcome of the function and not
the case when live detaching a device is denied and event is
issued.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1552092
If there's a long running job it might cause us to wait 30
seconds before we give up acquiring the job. This is problematic
to interactive applications that fetch stats repeatedly every few
seconds.
The solution is to introduce
VIR_CONNECT_GET_ALL_DOMAINS_STATS_NOWAIT flag which tries to
acquire job but does not wait if acquiring failed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1588336
This API takes @source argument which tells it where to get
domain IP addresses from. However, not all sources are capable of
providing all the information we report, for instance ARP table
has no notion of IP address prefixes. Document this limitation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
The API can be used outside the libvirt to get the launch security
information. When SEV is enabled, the API can be used to get the
measurement of the launch process.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When detaching a device it can be uniquely identified by its
alias. Instead of misusing virDomainDetachDeviceFlags which has
the same signature introduce new function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Whenever we declare a new object the first member of the struct
has to be virObject (or any other member of that family). Now, up
until now we did not care about the name of the struct member.
But lets unify it so that we can do some checks at compile time
later.
The unified name is 'parent'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
introduce VIR_DOMAIN_INTERFACE_ADDRESSES_SRC_ARP to get ip address
of VM from the message of netlink RTM_GETNEIGH
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There is one limitation for using this API, when the guest is started
with all actions set to "destroy" we put "-no-reboot" on the QEMU
command line. That cannot be changed while QEMU is running and
the QEMU process is always terminated no matter what is configured
for any action.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1460677
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1497396
The other APIs accept both, ifname and MAC address. There's no
reason virDomainInterfaceStats can't do the same.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Interestingly enough, we don't document the point of view of the
interface statistics. Therefore it's unknown to users if for
instance rx_packets is the number of packets received by domain or
received by host (from domain). Document this explicitly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Seeing a log message saying 'flags=93' is ambiguous & confusing unless
you happen to know that libvirt always prints flags as hex. Change our
debug messages so that they always add a '0x' prefix when printing flags,
and '0' prefix when printing mode. A few other misc places gain a '0x'
prefix in error messages too.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Similar to domainSaveImageDefineXML this commit adds domainManagedSaveDefineXML
API which allows to edit domain's managed save state xml configuration.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
Similar to domainSaveImageGetXMLDesc this commit adds domainManagedSaveGetXMLDesc
API which allows to get the xml of managed save state domain.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
The API docs for the various vir$OBJECTGetConnect functions
contain a warning
WARNING: When writing libvirt bindings in other languages, do
not use this function. Instead, store the connection and
the domain object together.
There is no reason why language bindings should not use this
method, and indeed the Perl, Python, and Go bindings all use
these methods.
This warning was originally added back in
commit 3edb4bc9fb
Author: Daniel Veillard <veillard@redhat.com>
Date: Tue Jul 24 15:32:55 2007 +0000
* libvirt.spec.in NEWS docs/* po/*: preparing release 0.3.1
* src/libvirt.c python/generator.py: some cleanup and warnings
from Richard W.M. Jones
IIUC, the rational was that these APIs do not need to be
directly exposed to the non-C language, as the language
can expose the same concept itself by storing the original
virConnectPtr object alongside the virDomainPtr. There's
no reason to mandate such an approach though - it is valid
for languages to expose this directly if that suits their
needs better.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It's obvious that unsigned long long is 64 bit and also our web page
generator would misplace the comment after the return value due to the
way it's parsing them.
Use ATTRIBUTE_FALLTHROUGH, introduced by commit
5d84f5961b, instead of comments to
indicate that the fall through is an intentional behavior.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Allow starting the block-copy job for a persistent domain if a user
declares by using a flag that the job will not be recovered if the VM is
switched off while the job is active.
This allows to use the block-copy job with persistent VMs under the same
conditions as would apply to transient domains.
qemu requires that the topology equals to the maximum vcpu count.
Document this along with the API to set maximum vcpu count and the XML
element.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1426220
Management tools may want to check whether the threshold is still set if
they missed an event. Add the data to the bulk stats API where they can
also query the current backing size at the same time.
