VIR_CONNECT_LIST_NODE_DEVICES_CAP_FC_HOST to filter the FC HBA,
and VIR_CONNECT_LIST_NODE_DEVICES_CAP_VPORTS to filter the FC HBA
which supports vport.
Guess it was created for the fc_host and vports_ops capabilities
purpose, but there is enum virNodeDevScsiHostCapFlags for them,
and enum virNodeDevHBACapType is unused, and actually both
VIR_ENUM_DECL and VIR_ENUM_IMPL use the wrong enum name
"virNodeDevHBACap".
For a root filesystem with type=file or type=block, the LXC
container was forgetting to actually mount it, before doing
the pivot root step.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the lxc controller sets up the devpts instance on
$rootfsdef->src, but this only works if $rootfsdef is using
type=mount. To support type=block or type=file for the root
filesystem, we must use /var/lib/libvirt/lxc/$NAME.devpts
for the temporary devpts mount in the controller
Instead of using /var/lib/libvirt/lxc/$NAME for the FUSE
filesystem, use /var/lib/libvirt/lxc/$NAME.fuse. This allows
room for other temporary mounts in the same directory
Some of the LXC callbacks did not lock the virDomainObjPtr
instance. This caused transient errors like
error: Failed to start domain busy-mount
error: cannot rename file '/var/run/libvirt/lxc/busy-mount.xml.new' as '/var/run/libvirt/lxc/busy-mount.xml': No such file or directory
as 2 threads tried to update the status file concurrently
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDomainGetRootFilesystem was only returning filesystems
with type=mount. This is bogus - any type of filesystem is
valid as the root, if dst=/.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Noticed that parsing bond interface XML containing the miimon element
fails
<interface type="bond" name="bond0">
...
<bond mode="active-backup">
<miimon freq="100" carrier="netif"/>
...
</bond>
</interface>
This configuration does not contain the optional updelay and downdelay
attributes, but parsing will fail due to returning the result of
virXPathULong (a -1 when the attribute doesn't exist) from
virInterfaceDefParseBond after examining the updelay attribute.
While fixing this bug, cleanup the function to use virXPathInt instead
of virXPathULong, and store the result directly instead of using a tmp
variable. Using virXPathInt actually fixes a potential silent
truncation bug noted by Eric Blake.
Also, there is no cleanup in the error label. Remove the label,
returning failure where failure occurs and success if the end of the
function is reached.
The 'nodeset' variable was never initialized, causing a later
VIR_FREE(nodeset) to free uninitialized memory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This does nothing more than adding the new device and capability.
The device is present since QEMU 1.2.0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A better way to do this would be to use a configuration file like
[iscsi "target-name"]
user = name
password = pwd
and pass it via -readconfig. This would remove the username and password
from the "ps" output. For now, however, keep this solution.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only sheepdog actually required it in the code, and we can use 7000 as the
default---the same value that QEMU uses for the simple "sheepdog:VOLUME"
syntax. With this change, the schema can be fixed to allow no port.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
libiscsi provides a userspace iSCSI initiator.
The main advantage over the kernel initiator is that it is very
easy to provide different initiator names for VMs on the same host.
Thus libiscsi supports usage of persistent reservations in the VM,
which otherwise would only be possible with NPIV.
libiscsi uses "iscsi" as the scheme, not "iscsi+tcp". We can change
this in the tests (while remaining backwards-compatible manner, because
QEMU uses TCP as the default transport for both Gluster and NBD).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some code mistakenly called virIdentityOnceInit directly
instead of virIdentityInitialize(). This meant that one-time
initializer was run many times with predictably bad results.
The VIR_ERR_NO_SUPPORT error code is reserved for cases where an
API is not implemented in a driver. It definitely should not be
used when an API execution fails due to unsupported operation.
The recent commit moved some of the use of libnuma out of the
driver code, and into src/util/. It did not, however, update
libvirt_util.la to link against libnuma. This caused linkage
failure with virt-aa-helper, since nothing else caused libnuma
to be pulled onto the linker command line.
The fix removes all reference to NUMACTL_LIBS/CFLAGS from the
various modules in src/Makefile.am and just adds them to the
libvirt_util.la module, which everything else depends on.
Technically a build-breaker fix, but wanted to wait for feedback
on this
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We should record the new disk src in the shared disk table for
updating disk (CD-ROM or Floppy) API. Fortunately, we only allow
to update the disk source now, otherwise we might also want to
set the unpriv_sgio setting.
This plumbs in the XML description of iSCSI shares. The next patches
will add support for the libiscsi userspace initiator.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that VCPU number are removed from qemu_monitor_text.c
(commit cc78d7ba), VCPU string checking also should be removed.
Report-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
but libvirt is built with --with-selinux. In this case getpeercon
returns ENOPROTOOPT so don't return an error in that case but simply
don't set seccon.
The virNetSocket & virIdentity classes accidentally got some
conditionals using HAVE_SELINUX instead of WITH_SELINUX.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Intend to reduce the redundant code,use virNumaSetupMemoryPolicy
to replace virLXCControllerSetupNUMAPolicy and
qemuProcessInitNumaMemoryPolicy.
This patch also moves the numa related codes to the
file virnuma.c and virnuma.h
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Allow lxc using the advisory nodeset from querying numad,
this means if user doesn't specify the numa nodes that
the lxc domain should assign to, libvirt will automatically
bind the lxc domain to the advisory nodeset which queried from
numad.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
qemuGetNumadAdvice will be used by LXC driver, rename
it to virNumaGetAutoPlacementAdvice and move it to virnuma.c
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
The "dtb" option sets the filename for the device tree.
If without this option support, "-dtb file" will be converted into
<qemu:commandline> in domain XML file.
For example, '-dtb /media/ram/test.dtb' will be converted into
<qemu:commandline>
<qemu:arg value='-dtb'/>
<qemu:arg value='/media/ram/test.dtb'/>
</qemu:commandline>
This is not very friendly.
This patchset add special <dtb> tag like <kernel> and <initrd>
which is easier for user to write domain XML file.
<os>
<type arch='ppc' machine='ppce500v2'>hvm</type>
<kernel>/media/ram/uImage</kernel>
<initrd>/media/ram/ramdisk</initrd>
<dtb>/media/ram/test.dtb</dtb>
<cmdline>root=/dev/ram rw console=ttyS0,115200</cmdline>
</os>
Signed-off-by: Eric Blake <eblake@redhat.com>
When building with --without-libvirtd and udev support is detected we
will fail to build with the following error:
node_device/node_device_udev.c:1608:37: error: unknown type name
'virStateInhibitCallback'
virStorageBackendRBDRefreshPool() first allocates an array big enough
to hold 1024 names, then calls rbd_list(), which returns ERANGE if the
array isn't big enough. When that happens, the VIR_ALLOC_N is called
again with a larger size. Unfortunately, the original array isn't
freed before allocating a new one.
The LXC controller is closing loop devices as soon as the
container has started. This is fine if the loop device
was setup as a mounted filesystem, but if we're just passing
through the loop device as a disk, nothing else is keeping
it open. Thus we must keep the loop device FDs open for as
long the libvirt_lxc process is running.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the LXC controller creates the cgroup, configures the
resources and adds the task all in one go. This is not sufficiently
flexible for the forthcoming NBD integration. We need to make sure
the NBD process gets into the right cgroup immediately, but we can
not have limits (in particular the device ACL) applied at the point
where we start qemu-nbd. So create a virLXCCgroupCreate method
which creates the cgroup and adds the current task to be called
early, and leave virLXCCgroupSetup to only do resource config.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When dispatching an RPC API call, setup the current identity to
hold the identity of the network client associated with the
RPC message being dispatched. The setting is thread-local, so
only affects the API call in this thread
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add APIs which allow creation of a virIdentity from the info
associated with a virNetServerClientPtr instance. This is done
based on the results of client authentication processes like
TLS, x509, SASL, SO_PEERCRED
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If no user identity is available, some operations may wish to
use the system identity. ie the identity of the current process
itself. Add an API to get such an identity.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To allow any internal API to get the current identity, add APIs
to associate a virIdentityPtr with the current thread, via a
thread local
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a local object virIdentity for managing security
attributes used to form a client application's identity.
Instances of this object are intended to be used as if they
were immutable, once created & populated with attributes
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A socket object has various pieces of security data associated
with it, such as the SELinux context, the SASL username and
the x509 distinguished name. Add new APIs to virNetServerClient
and related modules to access this data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 82d5fe5437
qemu: check backing chains even when cgroup is omitted
added backing file checks just before the code that removes optional
disks if they are not present. However, the backing chain code fails in
case the disk file does not exist, which makes qemuProcessStart fail
regardless on configured startupPolicy.
Note that startupPolicy implementation is still wrong after this patch
since it only check the first file in a possible chain. It should rather
check the complete backing chain. But this is an existing limitation
that can be solved later. After all, startupPolicy is most useful for
CDROM images and they won't make use of backing files in most cases.
QEMU 1.3 and newer support an alternative URI-based syntax to specify
the location of an NBD server. Libvirt can keep on using the old
syntax in general, but only the URI syntax supports IPv6 addresses.
The URI syntax also supports relative paths to Unix sockets. These
should never be used but aren't explicitly blocked either by the parser,
so support it just in case.
The URI syntax is intentionally compatible with Gluster's, and the
code can be reused.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This reuses the XML format that was introduced for Gluster.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
