The CPU model was implemented in QEMU by commit f6f949e929.
The change to i7-5600U is wrong since it's a 5th generation CPU, i.e.,
Broadwell rather than Skylake, but that's just the result of our CPU
detection code (which is fixed by the following commit).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
As a side effect this changes the order of CPU features in XMLs
generated by libvirt, but that's not a big deal since the order there is
insignificant.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For two reasons:
- 0x00000001 is very similar to 0x80000001, but 0x01 is visually
different
- 0x01 format is consistent with CPUID manual
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
CPUID instruction normally takes its parameter from EAX, but sometimes
ECX is used as an additional parameter. This patch prepares the x86 CPU
driver code for the new 'ecx_in' CPUID parameter.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The internal features are only used in explicit checks with
cpuHasFeature. Loading them into the CPU map is dangerous since the
features may accidentally be reported to users when decoding CPUID data.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virCPUData and struct ppc64_model structures contained a pointer to
virCPUppc64Data, which was not very nice since the real data were
accessible by yet another level of pointers from virCPUppc64Data.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virCPUData, virCPUx86Feature, and virCPUx86Model all contained a pointer
to virCPUx86Data, which was not very nice since the real CPUID data were
accessible by yet another pointer from virCPUx86Data. Moreover, using
virCPUx86Data directly will make static definitions of internal CPU
features a bit easier.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
CPUID instruction normally takes its parameter from EAX, but sometimes
ECX is used as an additional parameter. Let's rename 'function' to
'eax_in' in preparation for adding 'ecx_in'.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
A CPU data XML file already contains the architecture, let the parser
use it to detect which CPU driver should be used to parse the rest of
the file.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When computing CPU data for a given guest CPU we should set CPUID vendor
bits appropriately so that we don't lose the vendor when transforming
CPU data back to XML description.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
cpu/cpu_ppc64.c: In function 'ppc64Compute':
cpu/cpu_ppc64.c:620:27: error: potential null pointer dereference [-Werror=null-dereference]
if (STRNEQ(guest_model->name, host_model->name)) {
~~~~~~~~~~~^~~
cpu/cpu_ppc64.c:620:9: note: in expansion of macro 'STRNEQ'
if (STRNEQ(guest_model->name, host_model->name)) {
^~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
All callers of cpuGetModels expect @models to be NULL-terminated. Once
both x86GetModels and ppc64GetModels were fixed to meet this
expectation, we can explicitly document it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The architecture specific loaders are now called with a list of all
elements of a given type (rather than a single element at a time). This
avoids the need to reallocate the arrays in CPU maps for each element.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
There's no reason for keeping the models in a linked list. Especially
when we know upfront the total number of models we are loading.
As a nice side effect, this fixes ppc64GetModels to always return a
NULL-terminated list of models.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
There's no reason for keeping the vendors in a linked list. Especially
when we know upfront the total number of models we are loading.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
There's no reason for keeping the features in a linked list. Especially
when we know upfront the total number of features we are loading.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
There's no reason for keeping the vendors in a linked list. Especially
when we know upfront the total number of models we are loading.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
There's no reason for keeping the models in a linked list. Especially
when we know upfront the total number of models we are loading.
As a nice side effect, this fixes x86GetModels to always return a
NULL-terminated list of models.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When searching for the best CPU model for CPUID data we can easily
ignore models with non-matching vendor before spending time on CPUID
data to virCPUDef conversion.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Splitting the comparison into a separate function makes the code cleaner
and easier to update in the future.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Usage of this keyword in front of function declaration that is exported via a
header file is unnecessary, since internally, this has been the default for most
compilers for quite some time.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Commit 7068b56c introduced several hyperv features. Not all hyperv
features are supported by old enough kernels and we shouldn't allow to
start a guest if kernel doesn't support any of the hyperv feature.
There is one exception, for backward compatibility we cannot error out
if one of the RELAXED, VAPIC or SPINLOCKS isn't supported, for the same
reason we ignore invtsc, to not break restoring saved domains with older
libvirt.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
While the check is appropriate for eg. the x86 and generic drivers,
there are some valid ppc64 guest configurations where the CPU
model is supposed to be NULL.
Moving this check from the generic code to the drivers makes it
possible to accomodate both use cases.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1251927
Not all combinations of host CPU models and compatibility modes
are valid, so we need to make sure we don't try to do something
that QEMU will reject.
Moreover, we need to apply a different logic to guests using
host-model and host-passthrough modes when testing them for host
compatibility.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1251927
If a guest CPU is defined using
<cpu mode='host-model'/>
the <model> sub-element will contain the compatibility mode to use.
That means we can't just copy the host CPU model on cpuUpdate(),
otherwise we'll overwrite that information and migration of such
guests will fail.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1251927
Unlike what happens on x86, on ppc64 you can't mix and match CPU
features to obtain the guest CPU you want regardless of the host
CPU, so the concept of model fallback doesn't apply.
Make sure CPU definitions emitted by the driver, eg. as output of
the cpuBaseline() and cpuUpdate() calls, reflect this fact.
All previously recognized CPU models (POWER7_v2.1, POWER7_v2.3,
POWER7+_v2.1 and POWER8_v1.0) are internally converted to the
corrisponding generation name so that existing guests don't stop
working.
Use multiple PVRs per CPU model to reduce the number of models we
need to keep track of.
Remove specific CPU models (eg. POWER7+_v2.1): the corresponding
generic CPU model (eg. POWER7) should be used instead to ensure
the guest can be booted on any compatible host.
Get rid of all the entries that did not match any of the CPU
models supported by QEMU, like power8 and power8e.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1250977
This will allow us to perform PVR matching more broadly, eg. consider
both POWER8 and POWER8E CPUs to be the same even though they have
different PVR values.
This ensures comparison of two CPU definitions will be consistent
regardless of the fact that it is performed using cpuCompare() or
cpuGuestData(). The x86 driver uses the same exact code.
Limitations of the POWER architecture mean that you can't run
eg. a POWER7 guest on a POWER8 host when using KVM. This applies
to all guests, not just those using VIR_CPU_MATCH_STRICT in the
CPU definition; in fact, exact and strict CPU matching are
basically the same on ppc64.
This means, of course, that hosts using different CPUs have to be
considered incompatible as well.
Change ppc64Compute(), called by cpuGuestData(), to reflect this
fact and update test cases accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1250977
ppc64Compute(), called by cpuNodeData(), is used not only to retrieve
the driver-specific data associated to a guest CPU definition, but
also to check whether said guest CPU is compatible with the host CPU.
If the user is not interested in the CPU data, it's perfectly fine
to pass a NULL pointer instead of a return location, and the
compatibility data returned should not be affected by this. One of
the checks, specifically the one on CPU model name, was however
only performed if the return location was non-NULL.
Use briefer checks, eg. (!model) instead of (model == NULL), and
avoid initializing to NULL a pointer that would be assigned in
the first line of the function anyway.
Also remove a pointless NULL assignment.
No functional changes.
Use the ppc64Driver prefix for all functions that are used to
fill in the cpuDriverPPC64 structure, ie. those that are going
to be called by the generic CPU code.
This makes it clear which functions are exported and which are
implementation details; it also gets rid of the ambiguity that
affected the ppc64DataFree() function which, despite what the
name suggested, was not related to ppc64DataCopy() and could
not be used to release the memory allocated for a
virCPUppc64Data* instance.
No functional changes.
Only the symbols exported by the driver have been updated;
the driver implementation itself still uses the old names
internally.
No functional changes.
The driver only supports VIR_ARCH_PPC64 and VIR_ARCH_PPC64LE.
Just shuffling files around and updating the build system
accordingly. No functional changes.
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
QEMU 2.3 adds these new models to cover Haswell and Broadwell CPUs with
updated microcode. Luckily, they also reverted former the machine type
specific changes to existing models. And since these changes were never
released, we don't need to hack around them in libvirt.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Wikipedia's list of common misspellings [1] has a machine-readable
version. This patch fixes those misspellings mentioned in the list
which don't have multiple right variants (as e.g. "accension", which can
be both "accession" and "ascension"), such misspellings are left
untouched. The list of changes was manually re-checked for false
positives.
[1] https://en.wikipedia.org/wiki/Wikipedia:Lists_of_common_misspellings/For_machines
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
For historical reasons data regarding NUMA configuration were split
between the CPU definition and numatune. We cannot do anything about the
XML still being split, but we certainly can at least store the relevant
data in one place.
This patch moves the NUMA stuff to the right place.
Not all files we want to find using virFileFindResource{,Full} are
generated when libvirt is built, some of them (such as RNG schemas) are
distributed with sources. The current API was not able to find source
files if libvirt was built in VPATH.
Both RNG schemas and cpu_map.xml are distributed in source tarball.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The virCPUDefFormat* methods were relying on the VIR_DOMAIN_XML_*
flag definitions. It is not desirable for low level internal
functions to be coupled to flags for the public API, since they
may need to be called from several different contexts where the
flags would not be appropriate.
The curent libvirt CPU driver for s390 does not return a host CPU model.
This patch returns 'host' according to the other platforms that would
not decode any CPU model.
This is an intermediate bugfix due to a discussion on OpenStack mailing
list. The final patch introducing the CPU model support for s390x will
exchange the hard-coded decode method.
Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Commit 86a15a25 introduced a new cpu driver API 'getModels'. Public API
allow you to pass NULL for models to get only number of existing models.
However the new code will crash with segfault so we have to count with
the possibility that the user wants only the number.
There is also difference in order of the models gathered by this new API
as the old approach was inserting the elements to the end of the array
so we should use 'VIR_APPEND_ELEMENT'.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
For Intel and PowerPC the implementation is calling a cpu driver
function across driver layers (i.e. from qemu driver directly to cpu
driver).
The correct behavior is to use libvirt API functionality to perform such
a inter-driver call.
This patch introduces a new cpu driver API function getModels() to
retrieve the cpu models. The currect implementation to process the
cpu_map XML content is transferred to the INTEL and PowerPC cpu driver
specific API functions.
Additionally processing the cpu_map XML file is not safe due to the fact
that the cpu map does not exist for all architectures. Therefore it is
better to encapsulate the processing in the architecture specific cpu
drivers.
Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
IBM Power processors differ uniquely across generations (such as power6,
power7, power8). Each generation signifies a new PowerISA version
that exhibits features unique to that generation.
The higher 16 bits of PVR for IBM Power processors encode the CPU
generation, while the CPU chip (sub)version is encoded in lower 16 bits.
For all practical purposes of launching a VM, we care about the
generation which the vCPU will belong to, and not specifically the chip
version. This patch updates the libvirt PVR check to reflect this
relationship. It allows libvirt to select the right CPU generation
in case the exact match for a a specific CPU is not found.
Hence, there will no longer be a need to add each PowerPC CPU model to
cpu_map.xml; just adding entry for the matching ISA generation will
suffice.
It also contains changes to cpu_map.xml since processor generations
as understood by QEMU compat mode go as "power6", "power7" or "power8"
[Reference : QEMU commit 8dfa3a5e85 ]
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
PowerISA allows processors to run VMs in binary compatibility ("compat")
mode supporting an older version of ISA. QEMU has recently added support to
explicitly denote a VM running in compatibility mode through commit 6d9412ea
& 8dfa3a5e85. Now, a "compat" mode VM can be run by invoking this qemu
commandline on a POWER8 host: -cpu host,compat=power7.
This patch allows libvirt to exploit cpu mode 'host-model' to describe this
new mode for PowerKVM guests. For example, when a user wants to request a
power7 vm to run in compatibility mode on a Power8 host, this can be
described in XML as follows :
<cpu mode='host-model'>
<model>power7</model>
</cpu>
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
This adds support for PowerPC Little Endian architecture.,
and allows libvirt to spawn VMs based on 'ppc64le' architecture.
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit de0aeaf filtered them out from the host-model features,
to allow host-model to be migratable by default.
Even though they are not passed to QEMU for host-passthrough,
(and not enabled by default) filter them out too
so the user does not think the domain has them.
https://bugzilla.redhat.com/show_bug.cgi?id=1147584
Commit fba6bc4 introduced support for the 'invtsc' feature,
which blocks migration. We should not include it in the
host-model CPU by default, because it's intended to be used
with migration.
https://bugzilla.redhat.com/show_bug.cgi?id=1138221
Replace:
if (virBufferError(&buf)) {
virBufferFreeAndReset(&buf);
virReportOOMError();
...
}
with:
if (virBufferCheckError(&buf) < 0)
...
This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)
When CPU comparison APIs return VIR_CPU_COMPARE_INCOMPATIBLE, the caller
has no clue why the CPU is considered incompatible with host CPU. And in
some cases, it would be nice to be able to get such info in a client
rather than having to look in logs.
To achieve this, the APIs can be told to return VIR_ERR_CPU_INCOMPATIBLE
error for incompatible CPUs and the reason will be described in the
associated error message.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
So far three ARM processor families are known to libvirt,
however the cpu driver knows only about one of them. This
make host initialization on the other two fail:
2014-06-17 13:35:41.419+0000: 6840: info : libvirt version: 1.2.6
2014-06-17 13:35:41.419+0000: 6840: error : cpuNodeData:342 : this function is not supported by the connection driver: cannot get node CPU data for armv6l architecture
2014-06-17 13:35:41.433+0000: 6840: warning : virQEMUCapsInit:943 : Failed to get host CPU
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In "src/cpu/" there are some enumerations (enum) declarations.
Similar to the recent cleanup to "src/util", "src/conf" and other
directories, it's better to use a typedef for variable types,
function types and other usages. Other enumeration and folders will
be changed to typedef's in the future. Specially, in files that are
in different places of "src/util" and "src/conf". Most of the files
changed in this commit are related to CPU (cpu_map.h) enums.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Libvirt calls cpuArchDriver.compare() while doing guest migration.
We don't have any logic to distinguish between different arm and
aarch64 models that's why this patch allows migration to any host.
Signed-off-by: Oleg Strikov <oleg.strikov@canonical.com>
In "src/conf/" there are many enumeration (enum) declarations.
Similar to the recent cleanup to "src/util" directory, it's
better to use a typedef for variable types, function types and
other usages. Other enumeration and folders will be changed to
typedef's in the future. Most of the files changed in this commit
are related to CPU (cpu_conf) enums.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of the APIs in CPU driver do not expect to get NULL for input
parameters. Let's mark them with ATTRIBUTE_NONNULL and also check for
some members of virCPUDef when the APIs expect them have some specific
values.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When libvirtd is run from a build directory without being installed, it
should not depend on files from a libvirt package installed in the
system. Not only because there may not be any libvirt installed at all.
We already do a good job for plugins but cpu_map.xml was still loaded
from the system.
The Makefile.am change is necessary to make this all work from VPATH
builds since libvirtd has no idea where to find libvirt sources. It only
knows the path from which it was started, i.e, a builddir.
https://bugzilla.redhat.com/show_bug.cgi?id=1074327
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Openstack Nova calls virConnectBaselineCPU() during initialization
of the instance to get a full list of CPU features.
This patch adds a stub to arm-specific code to handle
this request (no actual work is done).
Signed-off-by: Oleg Strikov <oleg.strikov@canonical.com>
This patch allows libvirt user to specify 'host-passthrough'
cpu mode while using qemu/kvm backend on arm (arm32).
It uses 'host' as a CPU model name instead of some other stub
(correct CPU detection is not implemented yet) to allow libvirt
user to specify 'host-model' cpu mode as well.
Signed-off-by: Oleg Strikov <oleg.strikov@canonical.com>
Openstack Nova calls virConnectBaselineCPU() during initialization
of the instance to get a full list of CPU features.
This patch adds a stub to aarch64-specific code to handle
this request (no actual work is done). That's enough to have
this stub with limited functionality because qemu/kvm backend
supports only 'host-passthrough' cpu mode on aarch64.
Signed-off-by: Oleg Strikov <oleg.strikov@canonical.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1049391
When all source CPU XMLs contain just a single CPU model (with a
possibly varying set of additional feature elements),
virConnectBaselineCPU will try to use this CPU model in the computed
guest CPU. Thus, when used on just a single CPU (useful with
VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES), the result will not use a
different CPU model.
If the computed CPU uses the source model, set fallback mode to 'forbid'
to make sure the guest CPU will always be as close as possible to the
source CPUs.
https://bugzilla.redhat.com/show_bug.cgi?id=1049391
VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES flag for virConnectBaselineCPU
did not work if the resulting guest CPU would disable some features
present in its base model. This patch makes sure we won't try to add
such features twice.
This patch allows libvirt user to specify 'host-passthrough'
cpu mode while using qemu/kvm backend on aarch64.
It uses 'host' as a CPU model name instead of some other stub
(correct CPU detection is not implemented yet) to allow libvirt
user to specify 'host-model' cpu mode as well.
Signed-off-by: Oleg Strikov <oleg.strikov@canonical.com>
(crobinso: fix some indentation)
Some of the emulator features are presented in the <features> element in
the domain XML although they are virtual CPUID feature bits when
presented to the guest. To avoid confusing the users with these
features, as they are not configurable via the <cpu> element, this patch
adds an internal array where those can be stored privately instead of
exposing them in the XML.
Additionaly KVM feature bits are added as example usage of this code.
The CPUID functions were stored in multiple arrays according to a
specified prefix of those. This made it very hard to add another prefix
to store KVM CPUID features (0x40000000). Instead of hardcoding a third
array this patch changes the approach used:
The code is refactored to use a single array where the CPUID functions
are stored ordered by the cpuid function so that they don't depend on
the specific prefix and don't waste memory. The code is also less
complex using this approach. A trateoff to this is the change from O(N)
complexity to O(N^2) in x86DataAdd and x86DataSubtract. The rest of the
functions were already using O(N^2) algorithms.
Until now the map was loaded from the XML definition file every time a
operation on the flags was requested. With the introduciton of one shot
initializers we can store the definition forever (as it will never
change) instead of parsing it over and over again.
This makes virCPUx86DataAddCPUID, virCPUx86DataFree, and
virCPUx86MakeData available for direct usage outside of cpu driver in
tests and the new qemu monitor that will request the actual CPU
definition from a running qemu instance.
This patch adds cpuDataFormat and cpuDataParse APIs to be used in unit
tests for testing APIs that deal with virCPUData. In the x86 world, this
means we can now store/load arbitrary CPUID data in the test suite to
check correctness of CPU related APIs that could not be tested before.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in src/cpu.
* src/cpu/cpu.h (cpuArchDecode, cpuArchEncode, cpuArchUpdate)
(cpuArchHasFeature, cpuDecode, cpuEncode, cpuUpdate)
(cpuHasFeature): Use intended type.
* src/conf/cpu_conf.h (virCPUDefCopyModel, virCPUDefCopy):
Likewise.
(virCPUDefParseXML): Drop const.
* src/cpu/cpu.c (cpuDecode, cpuEncode, cpuUpdate, cpuHasFeature):
Fix fallout.
* src/cpu/cpu_x86.c (x86ModelFromCPU, x86ModelSubtractCPU)
(x86DecodeCPUData, x86EncodePolicy, x86Encode, x86UpdateCustom)
(x86UpdateHostModel, x86Update, x86HasFeature): Likewise.
* src/cpu/cpu_s390.c (s390Decode): Likewise.
* src/cpu/cpu_arm.c (ArmDecode): Likewise.
* src/cpu/cpu_powerpc.c (ppcModelFromCPU, ppcCompute, ppcDecode)
(ppcUpdate): Likewise.
* src/conf/cpu_conf.c (virCPUDefCopyModel, virCPUDefCopy)
(virCPUDefParseXML): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
On Power platform, Power7+ can support Power7 guest.
It needs to define XML configuration to specify guest's CPU model.
For exmaple:
<cpu match='exact'>
<model>POWER7_v2.1</model>
<vendor>IBM</vendor>
</cpu>
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
The s390, ppc and arm CPU drivers never set the 'arch' field
in their impl of cpuArchNodeData. This leads to error messages
being reported from cpuDataFree later, due to trying to use
VIR_ARCH_NONE.
#0 virRaiseErrorFull (filename=filename@entry=0x76f94434 "cpu/cpu.c", funcname=funcname@entry=0x76f942dc <__FUNCTION__.18096> "cpuGetSubDriver", linenr=linenr@entry=58,
domain=domain@entry=31, code=code@entry=1, level=level@entry=VIR_ERR_ERROR, str1=0x76f70e18 "internal error: %s",
str2=str2@entry=0x7155f2ec "undefined hardware architecture", str3=str3@entry=0x0, int1=int1@entry=-1, int2=int2@entry=-1, fmt=0x76f70e18 "internal error: %s")
at util/virerror.c:646
#1 0x76e682ea in virReportErrorHelper (domcode=domcode@entry=31, errorcode=errorcode@entry=1, filename=0x76f94434 "cpu/cpu.c",
funcname=0x76f942dc <__FUNCTION__.18096> "cpuGetSubDriver", linenr=linenr@entry=58, fmt=0x76f7e7e4 "%s") at util/virerror.c:1292
#2 0x76ed82d4 in cpuGetSubDriver (arch=<optimized out>) at cpu/cpu.c:57
#3 cpuGetSubDriver (arch=VIR_ARCH_NONE) at cpu/cpu.c:51
#4 0x76ed8818 in cpuDataFree (data=data@entry=0x70c22d78) at cpu/cpu.c:216
#5 0x716aaec0 in virQEMUCapsInitCPU (arch=VIR_ARCH_ARMV7L, caps=0x70c29a08) at qemu/qemu_capabilities.c:867
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virConnectBaselineCPU API does not expose the CPU features
that are part of the CPU's model. This patch adds a new flag,
VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES, that causes the API to explicitly
list all features that are part of that model.
Signed-off-by: Don Dugger <donald.d.dugger@intel.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Until now CPU features inherited from a specified CPU model could only
be overridden with 'disable' policy. With this patch, any explicitly
specified feature always overrides the same feature inherited from a CPU
model regardless on the specified policy.
The CPU in x86-exact-force-Haswell.xml would previously be incompatible
with x86-host-SandyBridge.xml CPU even though x86-host-SandyBridge.xml
provides all features required by x86-exact-force-Haswell.xml.
https://bugzilla.redhat.com/show_bug.cgi?id=799354
Until now, the "host-model" cpu mode couldn't be influenced. This patch
allows to use the <feature> elements to either enable or disable
specific CPU flags. This can be used to force flags that can be emulated
even if the host CPU doesn't support them.
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
The cpu_map.xml file is there to separate CPU model definitions from the
code. Having the only interesting data for PowerPC models only in the
source code. This patch moves this data to the XML file and removes the
hardcoded list completely.
PowerPC CPUs are either identical or incompatible and thus we just need
to look up the right model for given PVR without pretending we have
several candidates which we may choose from.
The function is also renamed as ppcDecode to match other functions in
PowerPC CPU driver.
Baseline API is supposed to return guest CPU definition that can be used
on any of the provided host CPUs. Since PowerPC CPUs are either
identical or incompatible, the API just needs to check that all provided
CPUs are identical. Previous implementation was completely bogus.
The function is also renamed as ppcBaseline to match other functions in
PowerPC CPU driver.
When ppcVendorLoad fails to parse the vendor element for whatever
reason, it is supposed to ignore it and return 0 rather than -1. The
patch also removes PowerPC vendor string from the XML as it is not
actually used for anything.
Make getting node CPU data for PowerPC unsupported on other
architectures. The function is also renamed as ppcNodeData to match
other functions in PowerPC CPU driver.
This makes code easier to read, by avoiding lines longer than
80 columns and removing the repetition from the callers.
* src/util/virstoragefile.c (qedGetHeaderUL, qedGetHeaderULL):
Delete in favor of more generic macros.
(qcow2GetBackingStoreFormat, qcowXGetBackingStore)
(qedGetBackingStore, virStorageFileMatchesVersion)
(virStorageFileGetMetadataInternal): Use new macros.
* src/cpu/cpu_x86.c (x86VendorLoad): Likewise.
Prior to the virArch changes, the CPU baseline method would
free the arch string in the returned CPU. Fix the regression
by setting arch to VIR_ARCH_NONE at the end
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The new model supports following features in addition to those supported
by SandyBridge:
fma, pcid, movbe, fsgsbase, bmi1, hle, avx2, smep, bmi2, erms, invpcid,
rtm
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Qemu has added some new feature flags. This patch adds them to libvirt.
The new features are for the cpuid function 0x7 that takes an argument
in the ecx register. Currently only 0x0 is used as the argument so I was
lazy and I just clear the registers to 0 before calling cpuid. In future
when there maybe will be some other possible arguments, we will need to
improve the cpu detection code to take this into account.
There are some descriptions not right in PowerPC CPU model driver.
This patch is to fix them.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Currently, the CPU model driver is not implemented for PowerPC.
Host's CPU information is needed to exposed to guests' XML file some
time.
This patch is to implement the callback functions of CPU model driver.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
CPU version can be got by PVR on PowerPC. So this PVR is defined in
the CPU data in cpuData structure.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
Adding CPU encoder/decoder for s390 to avoid runtime error messages.
Signed-off-by: Thang Pham <thang.pham@us.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This patch modifies the CPU comparrison function to report the
incompatibilities in more detail to ease identification of problems.
* src/cpu/cpu.h:
cpuGuestData(): Add argument to return detailed error message.
* src/cpu/cpu.c:
cpuGuestData(): Add passthrough for error argument.
* src/cpu/cpu_x86.c
x86FeatureNames(): Add function to convert a CPU definition to flag
names.
x86Compute(): - Add error message parameter
- Add macro for reporting detailed error messages.
- Improve error reporting.
- Simplify calculation of forbidden flags.
x86DataIteratorInit():
x86cpuidMatchAny(): Remove functions that are no longer needed.
* src/qemu/qemu_command.c:
qemuBuildCpuArgStr(): - Modify for new function prototype
- Add detailed error reports
- Change error code on incompatible processors
to VIR_ERR_CONFIG_UNSUPPORTED instead of
internal error
* tests/cputest.c:
cpuTestGuestData(): Modify for new function prototype
Return statements with parameter enclosed in parentheses were modified
and parentheses were removed. The whole change was scripted, here is how:
List of files was obtained using this command:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$'
Found files were modified with this command:
sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Then checked for nonsense.
The whole command looks like this:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
