Adding an IDE controller for a machinetype that has no built-in IDE
controller, libvirt will log an error. Currently the machinetype list
which returns by qemuDomainMachineHasBuiltinIDE only includes 440fx,
malta, sun4u and g3beige.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Adding an IDE controller for a machinetype that has no built-in IDE
controller, libvirt will log an error. Currently the machinetype list
which returns by qemuDomainMachineHasBuiltinIDE only includes 440fx,
malta, sun4u and g3beige.
Remove the disk and the .args file since the expectation is the test
will fail in qemuxml2argvtest because floppy is not supported on pseries
and thus no disk is necessary and no .args file would be created to
compare against.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
There's no reason for the files to have generic- prefix
since they all live under genericxml2xmlindata and
genericxml2xmloutdata directories.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's no reason for the files to have qemuxml2xmlout- prefix
since they all live under qemuxml2xmloutdata directory.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's no reason for the files to have qemuargv2xml- prefix
since they all live under qemuargv2xmldata directory.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's no reason for the files to have qemuagent- prefix
since they all live under qemuagentdata directory.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Similarly to the previous commit, rename .args files.
The files were renamed using the following commands. From
qemuxml2argvdata:
for i in qemuxml2argv-*.args; do mv $i ${i#qemuxml2argv-}; done
and then (to fix broken symlinks) from qemuxml2argvdata and
qemuxml2xmloutdata:
for i in $(find . -xtype l); do \
ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i;
done
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These XMLs live in a separate directory, there's no need for them
to have a special prefix in addition. It also doesn't play nicely
with ':e' completion in Vim, finding proper file based on
qemuxml2argvtest.c is also needlessly complicated.
The files were renamed using the following commands. From
qemuxml2argvdata:
for i in qemuxml2argv-*.xml; do mv $i ${i#qemuxml2argv-}; done
and then (to fix broken symlinks) from qemuxml2argvdata and
qemuxml2xmloutdata:
for i in $(find . -xtype l); do \
ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i;
done
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Raw local files do not pass through the backing store detector and thus
the code did not allocate the required backing store terminator for
them. Previously the terminating element would be formatted into the XML
since the default values used for the metadata allowed that. This is a
regression since a693fdba01 which was not detected in the review.
This patch also reverts all the changes in the test files.
In status XML, we do not store the QEMU version information, we only
format all the capabilities. We dropped QEMU_CAPS_PCI_MULTIBUS
in commit 5b783379 which was released in libvirt 3.2.0.
Therefore the only way of telling if the already running domain
at the time of daemon restart has been started with a QEMU that does
use 'pci.0' or not on PPC is to look at the pci-root controller's
alias. This is not an option if the domain has a user-specified alias
for the pci-root.
Instead of reintroducing the capability, assume 'pci.0' when we have
no version information. That way the only left broken use case would
be the combination of user aliases and very old QEMU.
Partially reverts commit 3a37af1e4.
https://bugzilla.redhat.com/show_bug.cgi?id=1518148
We do not fill out qemuCaps->arch when parsing status XML.
Use def->os.arch like we do for PPC.
This fixes hotplug after daemon restart for domains that use
a user alias for the implicit pci-root on x86.
https://bugzilla.redhat.com/show_bug.cgi?id=1518148
The 'wiremode' attribute exists in a couple of Xen XML files, but no code has
ever parsed that value. It was later added to the RNG schema too, again despite
there not being any code which parses it.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The libxlxml2domconfigdata directory was not covered in the RNG schema
tests. This hid a few bugs in both the libxl XML files and the RNG
schema itself.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Even though we never format the device on the QEMU command line,
as it's a platform serial device that's not user-instantiable,
we should still make sure it's available before using it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All serial devices shoule have an associated capability.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We should make sure the isa-serial device is available before
formatting it on the QEMU command line.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All serial devices shoule have an associated capability.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that <serial> and <console> on s390/s390x behave a bit more like the
other architectures, remove this extra differentation, and use sclp
console by default for new guests. New virtio consoles can still be
added, and it is actually needed because of the limited number of
instances for sclp and sclplm.
This reverts commit b1c88c1476, whose
reasons are not totally clear.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Introduce specific a target types with two models for the console
devices (sclp and sclplm) used in s390 and s390x guests, so isa-serial
is no more used for them.
This makes <serial> usable on s390 and s390x guests, with at most only
a single sclpconsole and one sclplmconsole devices usable in a single
guest (due to limitations in QEMU, which will enforce already at
runtime).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1449265
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the pl011 device
used by mach-virt guests, which means isa-serial will no longer show
up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that pl011 is not
used for non-mach-virt guests and add a bunch of test cases.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=151292
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The existing implementation set the address type for all serial
devices to spapr-vio, which made it impossible to use other devices
such as usb-serial and pci-serial; moreover, some decisions were
made based on the address type rather than the device type.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1512934
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the spapr-vty
device used by pSeries guests, which means isa-serial will no longer
show up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that spapr-vty is
not used for non-pSeries guests and add a bunch of test cases.
This commit is best viewed with 'git show -w'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511421
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This attribute was used to decide whether to format the type
attribute of the <target> element, but the logic didn't take into
account all possible cases and as such could lead to unexpected
results. Moreover, it's one more thing to keep track of, and can
easily fall out of sync with other attributes.
Now that we have VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_NONE, we can
use that value to signal that no specific target type has been
configured for the serial device and as such the attribute should
not be formatted at all. All other values are now formatted.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1425757
The blockdev-add code provides a mechanism to sanely provide user
and password-secret arguments for iscsi without placing them on the
command line to be viewable by a 'ps -ef' type command or needing
to create separate -iscsi devices for each disk/volume found.
So modify the iSCSI command line building to check for the presence
of the capability in order properly setup and use the domain master
secret object to encrypt the password in a secret object and alter
the parameters for the command line to utilize.
Modify the xml2argvtest to exhibit the syntax for both disk and
hostdev configurations.
Detect the capability via the query-qmp-schema for blockdev-add
to find the 'password-secret' parameter that will allow the iSCSI
code to use the master secret object to encrypt the secret for an
and only need to provide the object id of the secret on the command
line thus obsfuscating the passphrase.
For now it'll just call the virStoragePoolObjUnlock, but a future
adjustment will do something different. Since the new API will check
for a NULL object before the Unlock call, callers no longer need to
check for NULL before calling.
The virStoragePoolObjUnlock is now private/static to virstorageobj.c
with a short term forward reference.
Qemu has now an internal mechanism for locking images to fix specific
cases of disk corruption. This requires libvirt to mark the image as
shared so that qemu lifts certain restrictions.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1378242
'share-rw' for the disk device configures qemu to allow concurrent
access to the backing storage.
The capability is checked in various supported disk frontend buses since
it does not make sense to partially backport it.
Disk sharing between two VMs may corrupt the images if the format driver
does not support it. Check that the user declared use of a supported
storage format when they want to share the disk.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511480
Some test cases have the backend tag inside wrong interfaces. The backend xml
tag does not support <interface type='user|direct|hostdev'>. So this commit
changes some network types inside the interfaces that have backend defined.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Since we already have such support for libxl all we need is qemu
driver adjustment. And a test case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This capability says if qemu is capable of specifying distances
between NUMA nodes on the command line. Unfortunately, there's no
real way to check this and thus we have to go with version check.
QEMU introduced this in 0f203430dd8 (and friend) which was
released in 2.10.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since we don't pack symlinks we cannot have recursive loops in them. Since we
need one directory to be in tests/vircaps2xmldata/linux-caches/, instead of
creating a symlink, just move the files in that directory and adjust tests.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1434451
Just like in 9324f67a57 we need to put default sata alias
(which is hardcoded to "ide", obvious, right?) onto the command
line instead of the one provided by user.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add a separate capability for the sclplmconsole device, and check it
specifically instead of using QEMU_CAPS_DEVICE_SCLPCONSOLE for that too.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Give a better name to the capability for the sclpconsole device.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Up until now we assumed the spapr-vty device would always be
present, which is not very nice. Check for its availability before
using it instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Starting from qemu 2.11, the `-device vmcoreinfo` will create a fw_cfg
entry for a guest to store dump details, necessary to process kernel
dump with KASLR enabled and providing additional kernel details.
In essence, it is similar to -fw_cfg name=etc/vmcoreinfo,file=X but in
this case it is not backed by a file, but collected by QEMU itself.
Since the device is a singleton and shouldn't use additional hardware
resources, it is presented as a <feature> element in the libvirt
domain XML.
The device is arm/x86 only for now (targets that support fw_cfg+dma).
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1395248
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This doesn't add very much value for now, but future test for virresctrl will
take information from vircaps2xmldata (since it is dependent on the same info
then why duplicate it) and this particular use case helps us cover bit more of
the code regarding proper formatting and handling errors. And one more test for
vircaps2xmltest doesn't hurt either.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This patch modifies some not yet used test data so that the adding a test using
this data is a clean patch and not an addition of huge file with some
adjustments in small files that will be hidden in the middle of that commit.
These changes include:
- Add system dir in vircaps2xmldata/linux-caches
Back when data for systems with resctrl support were added they had the
/sys/fs/system directory put into a system/ subdir of the test and
/sys/fs/resctrl in a resctrl/ subdir of that test. However, if we also want a
negative test for the resctrl (requesting allocation on a system that does not
support resctrl), we need one a test case with any sensible (with cache info)
system/ subdir and no resctrl/ one. Easiest way is to add a
system -> . symlink into existing test case.
- Change default group schemata for linux-resctrl and linux-resctrl-cdp
That way we can fit some allocation in.
- Remove one cache from resctrl-skx's schemata and make some room for
allocations
That system already has only one cache, so that file was wrong anyway. We
have a version with 2 caches already (linux-resctrl-skx-twocaches), so this
will also add variety to future tests.
- Add some empty allocation for resctrl-skx
Just to have slightly more coverage and variety. We can be sure nothing bad
happens if such allocation exists in case we have that in the tests.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Already introduced in the past with 9479642fd3, but then renamed to
virBitmapIntersect by a908e9e45e. This time we'll really use it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Our bitmaps can be represented as data (raw bytes for which we have
virBitmapNewData() and virBitmapToData()), human representation (list
of numbers in a string for which we have virBitmapParse() and
virBitmapFormat()) and hexadecimal string (for which we have only
virBitmapToString()). So let's add the missing complement for the
last one so that we can parse hexadecimal strings.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It is literally only a wrapper around virBitmapNewData() and
virBitmapFormat(), only the naming was wrong since it was introduced.
And because we have virBitmap*String functions where the meaning of
the 'String' is constant, this might confuse someone.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Currenty virTestInit() outputs all capabilities that it created when running
with VIR_TEST_DEBUG=1. Since this is quite a lot of output for every call of
this function (and it is not needed until debugging a really deep-down issue)
let's just output the info when VIR_TEST_DEBUG is strictly greater than 1.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
If _CFLAGS for a binary is not specified it uses AM_CFLAGS. So doing
$binary_CFLAGS = $(AM_CFLAGS)
or
$binary_CFLAGS = $(AM_CFLAGS) $(something_that_is_already_in_AM_CFLAGS)
is pointless. So remove it for cleaner Makefile.am
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since update to glibc-2.26 removed the /usr/include/rpc/rpc.h we used until now,
it showed us a problem with not using XDR_CFLAGS properly. On linux that
variable has usually -I/usr/include/tirpc because we already probe for it
properly, we just don't use it everywhere we need. It is needed by wireshark
dissector as well as testutilsqemu.c (through includes) so the build fails with:
wireshark/src/packet-libvirt.c:33:10: fatal error: rpc/xdr.h: No such file or directory
#include <rpc/xdr.h>
^~~~~~~~~~~
and
In file included from ../src/logging/log_manager.h:29:0,
from ../src/qemu/qemu_domain.h:40,
from testutilsqemu.c:11:
../src/logging/log_protocol.h:9:10: fatal error: rpc/rpc.h: No such file or directory
#include <rpc/rpc.h>
^~~~~~~~~~~
Since lot of tests use testutilsqemu.c it is easier to add XDR_CFLAGS to
AM_CFLAGS than adding it to all $binary_CFLAGS. It's just for tests and we
already have bunch of CFLAGS there anyway.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Most of the time it's okay to leave this up to negotiation between
the guest and the host, but in some situations it can be useful to
manually decide the behavior, especially to enforce its availability.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1308743
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Some compilers may get confused and decide we are calling strcmp with
NULL argument from test_virCapsDomainDataLookupLXC. Although this does
not really happen since the call is guarded with
(data->machinetype != expect_machinetype), using STRNEQ_NULLABLE is
easier to understand, less fragile, and doing so makes sure strcmp is
never called with NULL argument.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The terminator would not be parsed properly since the XPath selector was
looking for an populated element, and also the code did not bother
assigning the terminating virStorageSourcePtr to the backingStore
property of the parent.
Some tests would catch it if there wasn't bigger fallout from the change
to backing store termination in a693fdba01. Fix them properly now.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509110
Add tests to ensure the libxl_domain_config generator properly
handles vNUMA configuration.
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Add tests for conversion of domXML vNUMA config to/from
xen-xl native vNUMA config.
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Since colors would be used when writing to stdout, then check that
stdout is a TTY, instead of stdin.
This avoids the usage of terminal color codes when the output is
directed to file.
https://bugzilla.redhat.com/show_bug.cgi?id=1434451
When testing user aliases it was discovered that for 440fx
machine type which has default IDE bus builtin, domain cannot
start if IDE controller has the user provided alias. This is
because for 440fx we don't put the IDE controller onto the
command line (since it is builtin) and therefore any device that
is plugged onto the bus must use the default alias.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There was a recent report of the xen-xl converter not handling
config files missing an ending newline
https://www.redhat.com/archives/libvir-list/2017-October/msg01353.html
Commit 3cc2a9e0 fixed a similar problem when parsing content of a
file but missed parsing in-memory content. But AFAICT, the better
fix is to properly set the end of the content when initializing the
virConfParserCtxt in virConfParse().
This commit reverts the part of 3cc2a9e0 that appends a newline to
files missing it, and fixes setting the end of content when
initializing virConfParserCtxt. A test is also added to check
parsing in-memory content missing an ending newline.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Split on the last colon and avoid parsing port if the split remainder
contains the closing square bracket, so that IPv6 addresses are
interpreted correctly.
The architecture itself is called ppc64, and it can run both in big
endian and little endian mode - the latter is known as ppc64le.
From the (virtual) hardware point of view, ppc64 is a more accurate
name so it should be used here.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
In some cases management application needs to allocate memory for
qemu upfront and then just let qemu use that. Since we don't want
to expose path for memory-backend-file anywhere in the domain
XML, we can generate predictable paths. In this case:
$memoryBackingDir/libvirt/qemu/$shortName/$alias
where $shortName is result of virDomainDefGetShortName().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add a new test program called 'qemublocktest' to test the block layer
related stuff and test storage source to JSON generator by comparing it
to the JSON parser.
Libvirt historically stores storage source path including the volume as
one string in the XML, but that is not really flexible enough when
dealing with the fields in the code. Previously we'd store the slash
separating the two as part of the image name. This was fine for gluster
but it's not necessary and does not scale well when converting other
protocols.
Don't store the slash as part of the path. The resulting change from
absolute to relative path within the gluster driver should be okay,
as the root directory is the default when accessing gluster.
Original implementation used 'SocketAddress' equivalent from qemu for
the disk server field, while qemu documentation specifies
'InetSocketAddress'. The backing store parser uses the correct parsing
function but the formatter used the incorrect one (and also with the
legacy mode enabled which was wrong).
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We handle incremental storage migration in a different way. The support
for this new (as of QEMU 2.10) parameter is only needed for full
coverage of migration parameters used by QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We already support several ways of setting migration bandwidth and this
is not adding another one. With this patch we are able to read and write
this parameter using query-migrate-parameters and migrate-set-parameters
in one call with all other parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The parameters used "migrate" prefix which is pretty redundant and
qemuMonitorMigrationParams structure is our internal representation of
QEMU migration parameters and it is supposed to use names which match
QEMU names.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We already support setting the maximum downtime with a dedicated
virDomainMigrateSetMaxDowntime API. This patch does not implement
another way of setting the downtime by adding a new public migration
parameter. It just makes sure any parameter we are able to get from a
QEMU monitor by query-migrate-parameters can be passed back to QEMU via
migrate-set-parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The second CHECK macro was used for string parameters. Let's rename it
to CHECK_STR and move it up to have all checks in one place.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The first CHECK macro in the test is used for checking integer values.
Let's make it a bit more generic to be usable for any numeric type and
use it for a new CHECK_INT macro.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Some tests require JSON_MODELS to be parsed into qemuCaps and applied
when computing CPU models and such test cannot succeed if QEMU driver is
disabled. Let's mark the tests with JSON_MODELS_REQUIRED and skip the
appropriate parts if building without QEMU.
On the other hand, CPU tests with JSON_MODELS should succeed even if
model definitions from QEMU are not parsed and applied. Let's explicitly
test this by repeating the tests without JSON_MODELS set.
This fixes the build with QEMU driver disabled, e.g., on some
architectures on RHEL/CentOS.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
By Default (without -d) the tests will only print Failures.
So a log should follow general "no message is a good message" style.
But the testfw checks always emit the skip info to stdout. Instead
they should use the redirection that is controlled by -d.
This avoids mesages like the following to clutter the log:
Skipping FW AAVMF32 test. Could not find /usr/share/AAVMF/AAVMF32_CODE.fd
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Some globbing chars in the domain name could be used to break out of
apparmor rules, so lets forbid these when in virt-aa-helper.
Also adding a test to ensure all those cases were detected as bad char.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The point of this test is to load live XML and test hotplug. But
even though the XMLs we are parsing are live, the parsing is done
with VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The qemuxml2argvtest expects the domain XMLs to be inactive ones.
Therefore we should pass inactive XMLs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The only remaining user of qemuMonitorGetMigrationCapability is our test
suite. Let's replace qemuMonitorGetMigrationCapability with
qemuMonitorGetMigrationCapabilities there and drop the unused function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since the virStorageEncryptionPtr encryption; is a member of
_virStorageSource it really should be allowed to be a subelement
of the disk <source> for various disk formats:
Source{File|Dir|Block|Volume}
SourceProtocol{RBD|ISCSI|NBD|Gluster|Simple|HTTP}
NB: Simple includes sheepdog, ftp, ftps, tftp
That way we can set up to allow the <encryption> element to be
formatted within the disk source, but we still need to be wary
from whence the element was read - see keep track and when it
comes to format the data, ensure it's written in the correct place.
Modify the qemuxml2argvtest to add a parse failure when there is an
<encryption> as a child of <disk> *and* an <encryption> as a child
of <source>.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine.
Since the virStorageAuthDefPtr auth; is a member of _virStorageSource
it really should be allowed to be a subelement of the disk <source>
for the RBD and iSCSI prototcols. That way we can set up to allow
the <auth> element to be formatted within the disk source.
Since we've allowed the <auth> to be a child of <disk>, we'll need
to keep track of how it was read so that when writing out we'll know
whether to format as child of <disk> or <source>. For the argv2xml
parsing, let's format under <source> as a preference. Do not allow
<auth> to be both a child of <disk> and <source>.
Modify the qemuxml2argvtest to add a parse failure when there is an
<auth> as a child of <disk> *and* an <auth> as a child of <source>.
Add tests to validate that if the <auth> was found in <source>, then
the resulting xml2xml and xml2arg works just fine. The two new .args
file are exact copies of the non "-source" version of the file.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine
Update the virstoragefile, virstoragetest, and args2xml file to show
the "preference" to place <auth> as a child of <source>.
This will be used later on in implementation of new API
virDomainSetLifecycleAction(). In order to use it, we need to store
the value in status XML to not lose the information if libvirtd is
restarted.
If some guest was started by old libvirt where it was not possible
to change the lifecycle action for running guest, we can safely
detect it based on the current actions from the status XML.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Without the fix in the previous patch the JSON data from QEMU would be
interpreted as Haswell-noTSX because x86DataFilterTSX would filter rtm
and hle features as a result of
family == 6 && model == 63 && stepping < 4
test even though this CPU has stepping == 4.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When migration fails, QEMU may provide a description of the error in
the reply to query-migrate QMP command. We can fetch this error and use
it instead of the generic "unexpectedly failed" message.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>