Wire up the flag to enable the 'write-blocking' 'copy-mode' of
'blockdev-mirror'.
It's not supported by all qemu versions but it is with those which we
use -blockdev with so we can use that instead of adding another custom
capability as we use blockdev for some time now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cases when the destination storage is slower than the normal VM
storage and the VM does intensive I/O to the disk a block copy job may
never converge.
Switching it to synchronous mode will ensure that all writes done by the
guest are propagated to the destination at the cost of slowing down I/O
of the guest to the synchronous speed.
This patch adds the new API flag and implements virsh support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Forces the data to be written synchronously to both the original and the
mirrored images which ensures that the job will reach synchronized
phase.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the construction of the command from the variable declaration so
that it doesn't exceed the line length and we can also move the logic of
determining the protocol outside of the command construction.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The migration API takes specific flags which are then converted to
boolean parameters for the command. Extract the flag into helper
variables rather than using ternary operators while constructing the
command itself.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of a ternary operator we can use the existing helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the cleanup sections where not needed after we've converted to
automatic freeing of virJSONValue.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the code to use g_autoptr for the few cases sill using explicit
cleanup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the control flow so we can remove the cleanup label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't use 'goto' for looping. Extract the monitor interaction code into
a new function and restructure the logic to avoid jumping back in the
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't use 'goto' for looping. Extract the sync sending code into a new
function and restructure the logic to avoid jumping back in the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the unlinking of the state file right after reading it so that we
can get rid of the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the unlinking of the state file earlier and get rid of the cleanup
label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert two temp strings and one virJSONValue to g_auto(free|ptr).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virJSONValueObjectAdd instead of step-by-step construction of the
object. This also removes a handful impossible to reach errors with
translatable messages.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We use this approach for other APIs which take a virJSONValue as
argument and the logic is also simpler.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are a few uses which still explicitly free JSON objects, fix them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Whenever virPCIGetNetName() is called, it is either called with
physPortID = NULL, or with it set by the caller calling
virNetDevGetPhysPortID() soon before virPCIGetNetName(). The
physPortID is then used *only* in virPCIGetNetName().
Rather than replicating that same call to virNetDevGetPhysPortID() in
all the callers of virPCIGetNetName(), lets just have all those
callers send the NetDevName whose physPortID they want down to
virPCIGetNetName(), and let virPCIGetNetName() call
virNetDevGetPhysPortID().
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 795e9e05c3 (libvirt-7.7.0) refactored the code in virpci.c and
virnetdev.c that gathered lists of the Virtual Functions (VF) of an
SRIOV Physical Function (PF) to simplify the code.
Unfortunately the simplification made the assumption, in the new
function virPCIGetVirtualFunctionsFull(), that a VF's netdev
interface name should only be retrieved if the PF had a valid
phys_port_id. That is an incorrect assumption - only a small handful
of (now previous-generation) Mellanox SRIOV cards actually use
phys_port_id (this is for an odd design where there are multiple
physical network ports on a single PCI address); all other SRIOV cards
(including new Mellanox cards) have a file in sysfs called
phys_port_id, but it can't be read, and so the pfPhysPortID string is
NULL.
The result of this logic error is that virtual networks that are a
pool of VFs to be used for macvtap connections will be unable to
start, giving an errror like this:
VF 0 of SRIOV PF enp130s0f0 couldn't be added to the interface pool because it isn't bound to a network driver - possibly in use elsewhere
This error message is misinformed - the caller of
virNetDevGetVirtualFunctionsFull() only *thinks* that the VF isn't
bound to a network driver because it doesn't see a netdev name for the
VF in the list. But that's only because
virNetDevGetVirtualFunctionsFull() didn't even try to get the names!
We do need a way for virPCIGetVirtualFunctionsFull() to sometimes
retrieve the netdev names and sometimes not. One way of doing that
would be to send down the netdev name of the PF whenever we also want
to know the netdev names of the VFs, but send a NULL when we
don't. This can conveniently be done by just *replacing* pfPhysPortID
in the arglist with pfNetDevName - pfPhysPortID is determined by
simply calling virNetDevGetPhysPortID(pfNetDevName) so we can just
make that call down in virPCIGetVirtualFunctionsFull() (when needed).
This solves the regression introduced by commit 795e9e05c3, and also
nicely sets us up to (in a subsequent commit) move the call to
virNetDevGetPhysPortID() down one layer further to virPCIGetNetName(),
where it really belongs!
Resolves: https://bugzilla.redhat.com/2025432
Fixes: 795e9e05c3
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The Homebrew package explicitly enables this driver despite us
disabling it by default on macOS, so it must be functional to
at least some extent and certainly can't be causing any build
failures.
Additionally, if the user has explicitly asked for the network
driver to be enabled but libvirtd is disabled for whatever
reason, we should error out instead of silently disabling the
network driver.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanups some labels became needless because they
contain just a return statement. There's no point in having such
labels.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of calling virDomainDefFree() explicitly, we can annotate
variables with g_autoptr().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of calling VIR_FREE() explicitly, we can annotate
variables with g_autofree.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit <f33ce12e9cd9cab7e6022e91d3765c33d99bf777> dropped unused code
but missed one variable.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virNetDaemonQuit(dmn) command in virLXCControllerSignalChildIO triggers an
early close of all clients of lxc_controller. Here, libvirtd itself is a client
of this controller, and the client connection is used to notify libvirtd if a
reboot of the container is required. However, the client connection was closed
before such a status could be sent to libvirtd. To fix this bug, we will
immediately send the reboot or shutdown status of the container to libvirtd,
and only after client disconnect will we trigger virNetDaemonQuit.
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/237
Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=991773
Signed-off-by: Joachim Falk <joachim.falk@gmx.de>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The hash table of log file objects in libxlLogger is not protected against
concurrent access. It is possible for one thread to remove an entry while
another is updating it. Add a mutex to the libxlLogger object and lock it
when accessing the files hash table.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
libxl can deliver events and invoke callbacks on any application thread
calling into libxl. This can cause deadlock in the libvirt libxl driver
Thread 19 (Thread 0x7f31411ec700 (LWP 14068) "libvirtd"):
#0 0x00007f318520cc7d in __lll_lock_wait () from /lib64/libpthread.so.0
#1 0x00007f3185205ed5 in pthread_mutex_lock () from /lib64/libpthread.so.0
#2 0x00007f3189488015 in virMutexLock (m=<optimized out>) at ../../src/util/virthread.c:79
#3 0x00007f3189463f3b in virObjectLock (anyobj=<optimized out>) at ../../src/util/virobject.c:433
#4 0x00007f31894f2f41 in virDomainObjListSearchID (payload=0x7f317400a6d0, name=<optimized out>, data=0x7f31411eaeac) at ../../src/conf/virdomainobjlist.c:105
#5 0x00007f3189437ac5 in virHashSearch (ctable=0x7f3124025a30, iter=iter@entry=0x7f31894f2f30 <virDomainObjListSearchID>, data=data@entry=0x7f31411eaeac, name=name@entry=0x0) at ../../src/util/virhash.c:745
#6 0x00007f31894f3919 in virDomainObjListFindByID (doms=0x7f3124025430, id=<optimized out>) at ../../src/conf/virdomainobjlist.c:121
#7 0x00007f3152f292e5 in libxlDomainEventHandler (data=0x7f3124023d80, event=0x7f310c010ae0) at ../../src/libxl/libxl_domain.c:660
#8 0x00007f3152c6ff5d in egc_run_callbacks (egc=egc@entry=0x7f31411eaf50) at libxl_event.c:1427
#9 0x00007f3152c718bd in libxl__egc_cleanup (egc=0x7f31411eaf50) at libxl_event.c:1458
#10 libxl__ao_inprogress (ao=ao@entry=0x7f310c00b8a0, file=file@entry=0x7f3152cce987 "libxl_domain.c", line=line@entry=730, func=func@entry=0x7f3152ccf750 <__func__.22238> "libxl_domain_unpause") at libxl_event.c:2047
#11 0x00007f3152c8c5b8 in libxl_domain_unpause (ctx=0x7f3124015a40, domid=<optimized out>, ao_how=ao_how@entry=0x0) at libxl_domain.c:730
#12 0x00007f3152f2a584 in libxl_domain_unpause_0x041200 (domid=<optimized out>, ctx=<optimized out>) at /usr/include/libxl.h:1756
#13 libxlDomainStart (driver=driver@entry=0x7f3124023d80, vm=vm@entry=0x7f317400a6d0, start_paused=start_paused@entry=false, restore_fd=restore_fd@entry=-1, restore_ver=<optimized out>, restore_ver@entry=2) at ../../src/libxl/libxl_domain.c:1482
#14 0x00007f3152f2a6e3 in libxlDomainStartNew (driver=driver@entry=0x7f3124023d80, vm=vm@entry=0x7f317400a6d0, start_paused=start_paused@entry=false) at ../../src/libxl/libxl_domain.c:1545
#15 0x00007f3152f2a789 in libxlDomainShutdownHandleRestart (driver=0x7f3124023d80, vm=0x7f317400a6d0) at ../../src/libxl/libxl_domain.c:464
#16 0x00007f3152f2a9e4 in libxlDomainShutdownThread (opaque=<optimized out>) at ../../src/libxl/libxl_domain.c:559
#17 0x00007f3189487ee2 in virThreadHelper (data=<optimized out>) at ../../src/util/virthread.c:196
#18 0x00007f3185203539 in start_thread () from /lib64/libpthread.so.0
#19 0x00007f3184f3becf in clone () from /lib64/libc.so.6
Frame 16 runs a thread created to handle domain shutdown processing for
domid 28712. In this case the event contained the reboot reason, so the
old domain is destroyed and a new one is created by libxlDomainStart new.
After starting the domain, it is unpaused by calling libxl_domain_unpause
in frame 12. While the thread is running within libxl, libxl takes the
opportunity to deliver a pending domain shutdown event for unrelated domid
28710. While searching for the associated virDomainObj by ID, a deadlock is
encountered when attempting to lock the virDomainObj for domid 28712, which
is already locked since this thread is processing its shutdown event.
The deadlock can be avoided by moving the search for a virDomainObj
associated with the event domid to the shutdown thread. The same is done
for the death thread.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similar to domain shutdown events, processing domain death events can be a
lengthy process and we don't want to block the event handler while the
operation completes. Move the death handling function to a thread.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
