The recent patch series proposing the addition of PPC little endian
arch support to Linux defines new arch names 'ppcle' and 'ppc64le':
https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-August/109908.html
This just makes libvirt know about these arch names, so it doesn't
immediately trip up if it seems these new names from uname.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Implement the bare minimal sysinfo for AArch64 platforms by
reading the CPU models from /proc/cpuinfo.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Adding AArch64(ARMv8 64bit) to the current list of valid architectures.
For now, AArch64 name would imply AArch64 LE mode only. In future,
we might have separate names for AArch64 LE and BE.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
The range of valid values for cgroup tunables has
changed in the past and may change again in future
kernels. Avoid hardcoding range checks in libvirt
code, delegating range checking to the kernel itself.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
When EINVAL is returned while changing a cgroups value, tell
user that what values are invalid for the field.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in src/util outside of the virnet namespace.
Also, make a few virSocketAddr functions const-correct, for easier
conversions in future patches.
* src/util/virbuffer.h (virBufferError, virBufferUse)
(virBufferGetIndent): Use intended type.
* src/util/virmacaddr.h (virMacAddrCmp, virMacAddrCmpRaw)
(virMacAddrSet, virMcAddrFormat, virMacAddrIsUnicast)
(virMacAddrIsMulticast): Likewise.
* src/util/virebtables.h (ebtablesAddForwardAllowIn)
(ebtablesRemoveForwardAllowIn): Likewise.
* src/util/virsocketaddr.h (virSocketAddrSetIPv4Addr): Drop
incorrect const.
(virMacAddrGetRaw, virSocketAddrFormat, virSocketAddrFormatFull):
Make const-correct.
(virSocketAddrMask, virSocketAddrMaskByPrefix)
(virSocketAddrBroadcast, virSocketAddrBroadcastByPrefix)
(virSocketAddrGetNumNetmaskBits, virSocketAddrGetIpPrefix)
(virSocketAddrEqual, virSocketAddrIsPrivate)
(virSocketAddrIsWildcard): Use intended type.
* src/util/virbuffer.c (virBufferError, virBufferUse)
(virBufferGetIndent): Fix fallout.
* src/util/virmacaddr.c (virMacAddrCmp, virMacAddrCmpRaw)
(virMacAddrSet, virMcAddrFormat, virMacAddrIsUnicast)
(virMacAddrIsMulticast): Likewise.
* src/util/virebtables.c (ebtablesAddForwardAllowIn)
(ebtablesRemoveForwardAllowIn): Likewise.
* src/util/virsocketaddr.c (virSocketAddrMask, virMacAddrGetRaw)
(virSocketAddrMaskByPrefix, virSocketAddrBroadcast)
(virSocketAddrBroadcastByPrefix, virSocketAddrGetNumNetmaskBits)
(virSocketAddrGetIpPrefix, virSocketAddrEqual)
(virSocketAddrIsPrivate, virSocketAddrIsWildcard)
(virSocketAddrGetIPv4Addr, virSocketAddrGetIPv6Addr)
(virSocketAddrFormat, virSocketAddrFormatFull): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up virhash to provide a const-correct interface: all actions
that don't modify the table take a const table. Note that in
one case (virHashSearch), we actually strip const away - we aren't
modifying the contents of the table, so much as associated data
for ensuring that the code uses the table correctly (if this were
C++, it would be a case for the 'mutable' keyword).
* src/util/virhash.h (virHashKeyComparator, virHashEqual): Use
intended type.
(virHashSize, virHashTableSize, virHashLookup, virHashSearch):
Make const-correct.
* src/util/virhash.c (virHashEqualData, virHashEqual)
(virHashLookup, virHashSize, virHashTableSize, virHashSearch)
(virHashComputeKey): Fix fallout.
* src/conf/nwfilter_params.c
(virNWFilterFormatParameterNameSorter): Likewise.
* src/nwfilter/nwfilter_ebiptables_driver.c
(ebiptablesFilterOrderSort): Likewise.
* tests/virhashtest.c (testHashGetItemsCompKey)
(testHashGetItemsCompValue): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
In Fedora 20, libvirt_lxc crashes immediately at startup with a
trace
#0 0x00007f0cddb653ec in free () from /lib64/libc.so.6
#1 0x00007f0ce0e16f4a in virFree (ptrptr=ptrptr@entry=0x7f0ce1830058) at util/viralloc.c:580
#2 0x00007f0ce0e2764b in virResetError (err=0x7f0ce1830030) at util/virerror.c:354
#3 0x00007f0ce0e27a5a in virResetLastError () at util/virerror.c:387
#4 0x00007f0ce0e28858 in virEventRegisterDefaultImpl () at util/virevent.c:233
#5 0x00007f0ce0db47c6 in main (argc=11, argv=0x7fff4596c328) at lxc/lxc_controller.c:2352
Normally virInitialize calls virErrorInitialize and
virThreadInitialize, but we don't link to libvirt.so
in libvirt_lxc, and nor did we ever call the error
or thread initializers.
I have absolutely no idea how this has ever worked, let alone
what caused it to stop working in Fedora 20.
In addition not all code paths from virLogSetFromEnv will
ensure virLogInitialize is called correctly, which is another
possible crash scenario.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Previous commit
commit 7ada155cdf
Author: Gao feng <gaofeng@cn.fujitsu.com>
Date: Wed Sep 11 11:15:02 2013 +0800
DBus: introduce virDBusIsServiceEnabled
Made the cgroups code fallback to non-systemd based setup
when dbus is not running. It was too big a hammer though,
as it did not check what error code was received when the
dbus connection failed. Thus it silently ignored serious
errors from dbus such as "too many client connections",
which should always be treated as fatal.
We only want to ignore errors if the dbus unix socket does
not exist, or if nothing is listening on it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The log message regex has been
[0-9]{4}-[0-9]{2}-[0-9]{2} [0-9]{2}:[0-9]{2}:[0-9]{2}\.[0-9]{3}\+[0-9]{4}: [0-9]+: debug|info|warning|error :
The precedence of '|' is high though, so this is equivalent to matching
[0-9]{4}-[0-9]{2}-[0-9]{2} [0-9]{2}:[0-9]{2}:[0-9]{2}\.[0-9]{3}\+[0-9]{4}: [0-9]+: debug
Or
info
Or
warning
Or
error :
Which is clearly not what it should have done. This caused the code to
skip over things which are not log messages. The solution is to simply
add brackets.
A test case is also added to validate correctness.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The dbus_bus_get() function returns a shared bus connection that
all libraries in a process can use. You are forbidden from calling
close on this connection though, since you can never know if any
other code might be using it.
Add an option to use private dbus bus connections, if the app
wants to be able to close the connection.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The helper function virCompareLimitUlong compares limit values,
where value of 0 is equal to unlimited. If the latter parameter is 0,
it should return -1 instead of 1, hence the user can only set hard_limit when
swap_hard_limit currently is unlimited.
Worse, all callers pass 2 64-bit values, but on 32-bit platforms,
the second argument was silently truncated to 32 bits, which
could lead to incorrect computations.
Signed-off-by: Bing Bu Cao <mars@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The enum for virNetDevVPort is declared in the header file
virnetdevvportprofile.h, but for some reason the impl is
in netdev_vport_profile_conf.c.
This causes a dep from src/util onto src/conf which is not
allowed. Move the enum impl into virnetdevvportprofile.c
to break the circle.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This function takes exactly one argument: an address to check.
It returns true, if the address is an IPv4 or IPv6 address in numeric
format, false otherwise (e.g. for "examplehost").
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We currently have other error codes in singular form, e.g.
VIR_ERR_NETWORK_EXIST. Cleanup the previous patch to match the form.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I created a storage volume(eg: test) from a storage pool(eg:vg10) using
the following command:"virsh vol-create-as --pool vg10 --name test --capacity 300M."
When I re-executed the above command, the output was as the following:
"error: Failed to create vol test
error: Storage volume not found: storage vol 'test' already exists"
I think the output "Storage volume not found" is not appropriate. Because in fact storage
vol test has been found at this time. And then I think virErrorNumber should includes
VIR_ERR_STORAGE_EXIST which can also be used elsewhere. So I make this patch. The result
is as following:
"error: Failed to create vol test
error: storage volume 'test' exists already"
My previous commit 7dc1d4ab was supposed to change safezero to allocate
1 megabyte at maximum, but had the logic reversed and will allocate 1
megabyte at minimum (and a lot more at maximum.)
Signed-off-by: Oskari Saarenmaa <os@ohmu.fi>
mmap can fail on 32-bit systems if we're trying to zero out a lot of data.
Fall back to using block-by-block writing in that case. While we could map
smaller blocks it's unlikely that this code is used a lot and its easier to
just fall back to one of the existing methods.
Also modified the block-by-block zeroing to not allocate a megabyte of
zeroes if we're writing less than that.
Signed-off-by: Oskari Saarenmaa <os@ohmu.fi>
The XML parser reserves 'vnet' as a prefix for automatically
generated NIC device names. Switch the veth device creation
to use this prefix, so it does not have to worry about clashes
with user specified names in the XML.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The veth device creation code run in two steps, first it looks
for two free veth device names, then it runs ip link to create
the veth pair. There is an obvious race between finding free
names and creating them, when guests are started in parallel.
Rewrite the code to loop and re-try creation if it fails, to
deal with the race condition.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The kernel automatically destroys veth devices when cleaning
up the container network namespace. During normal shutdown, it
is thus likely that the attempt to run 'ip link del vethN'
will fail. If it fails, check if the device exists, and avoid
reporting an error if it has gone. This switches to use the
virCommand APIs instead of virRun too.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
So far the virNetDevBandwidthEqual() expected both ->in and ->out items
to be allocated for both @a and @b compared. This is not necessary true
for all our code. For instance, running 'update-device' twice over a NIC
with the very same XML results in SIGSEGV-ing in this function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This should resolve:
https://bugzilla.redhat.com/show_bug.cgi?id=1012085
libvirt previously recognized NFS, GFS2, OCFS2, and AFS filesystems as
"shared", and thus eligible for exceptions to certain rules/actions
about chowning image files before handing them off to a guest. This
patch widens the definition of "shared filesystem" to include SMB and
CIFS filesystems (aka "Windows file sharing"); both of these use the
same protocol, but different drivers so there are different magic
numbers for each.
The problem is described by [0] but its effect on libvirt is that
starting a container with a full distro running systemd after having
stopped it simply fails.
The container cleanup now calls the machined Terminate function to make
sure that everything is in order for the next run.
[0]: https://bugs.freedesktop.org/show_bug.cgi?id=68370
mmap's offset must be aligned to page size or mapping will fail.
mmap-based safezero is only used if posix_fallocate isn't available.
Signed-off-by: Oskari Saarenmaa <os@ohmu.fi>
Fixed the retrieval of the AdapterId from the AdapterName of the
hostdev source so it does return an error instead of leaving the
adapter_id uninitialized.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
The debug message said there was a timeout of 0 pending for -1 ms which
made me think this is where a hang was coming from but according to the
function comments this case means that there is no timeout pending so
make the debug message say that instead of saying there's a -1 ms
timeout.
Normally a lockspace resource is not freed while there are
active owners. During initial resource creation though, an
OOM error will trigger this scenario. virLockSpaceResourceFree
was not freeing the 'owners' field in this case.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If OOM or another error occurs in virJSONValueFromString the
parser state object will be leaked.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If OOM occurs in virJSONParserHandleStartMap it will free
a variable that is owned by another object. This leads to
a later double-free.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If virDBusMessageIterEncode hits an OOM condition it often
leaks the memory associated with the dbus iterator object
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The code parsing comments in config files called virConfAddEntry
but did not check for failure. This caused the comment string to
leak on OOM.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The functions
- iptablesAddForwardDontMasquerade(),
- iptablesRemoveForwardDontMasquerade
handle exceptions in the masquerading implemented in the POSTROUTING chain
of the "nat" table. Such exceptions should be added as chronologically
latest, logically top-most rules.
The bridge driver will call these functions beginning with the next patch:
some special destination IP addresses always refer to the local
subnetwork, even though they don't match any practical subnetwork's
netmask. Packets from virbrN targeting such IP addresses are never routed
outwards, but the current rules treat them as non-virbrN-destined packets
and masquerade them. This causes problems for some receivers on virbrN.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
The virCommandAddEnvPassCommon method ignored the failure to
pre-allocate the env variable array with VIR_RESIZE_N. While
this is harmless, it confuses the test harness which is trying
to validate OOM handling of every individual allocation call.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When the various viralloc.c functions were changed to use the
normal error reporting code, the OOM injection code paths
were not updated to report errors.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In commit 6d41cb8, the interface for virEventAddHandleFunc was changed.
This patch updates the documentation for virEventAddHandle to reflect
the new significance of the return value. Also, both functions now
mention -1 for failure.
The polkit access driver will want to use the process start
time field. This was already set for network identities, but
not for the system identity.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Future improvements to the polkit code will require access to
the numeric user ID, not merely user name.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDomainGetMetadata function was designed to support also retrieval
of app specific metadata from the <metadata> element. This functionality
was never implemented originally.
https://bugzilla.redhat.com/show_bug.cgi?id=1008619
1,003 bytes in 1 blocks are definitely lost in loss record 599 of 635
==404== by 0x50728A7: virBufferAddChar (virbuffer.c:185)
==404== by 0x50BC466: virSystemdEscapeName (virsystemd.c:67)
==404== by 0x50BC6B2: virSystemdMakeSliceName (virsystemd.c:108)
==404== by 0x50BC870: virSystemdCreateMachine (virsystemd.c:169)
==404== by 0x5078267: virCgroupNewMachine (vircgroup.c:1498)
Bother those kernel developers. In the latest rawhide, kernel
and glibc have now been unified so that <netinet/in.h> and
<linux/in6.h> no longer clash; but <linux/if_bridge.h> is still
not self-contained. Because of the latest header change, the
build is failing with:
checking for linux/param.h... no
configure: error: You must install kernel-headers in order to compile libvirt with QEMU or LXC support
with details:
In file included from conftest.c:561:0:
/usr/include/linux/in6.h:71:18: error: field 'flr_dst' has incomplete type
struct in6_addr flr_dst;
We need a workaround to avoid our workaround :)
* configure.ac (NETINET_LINUX_WORKAROUND): New test.
* src/util/virnetdevbridge.c (includes): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Debian systems may run the 'systemd-logind' daemon, which causes the
/sys/fs/cgroup/systemd mount to be setup, but no other cgroup
controllers are created. While the LXC driver considers cgroups to
be mandatory, the QEMU driver is supposed to accept them as optional.
We detect whether they are present by looking in /proc/mounts for
any mounts of type 'cgroups', but this is not sufficient. We need to
skip any named mounts (as seen by a name=XXX string in the mount
options), so that we only detect actual resource controllers.
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=721979
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch introduces virDBusIsServiceEnabled, we can use
this method to get if the service is supported.
In one case, if org.freedesktop.machine1 is unavailable on
host, we should skip creating machine through systemd.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Some users in Ubuntu/Debian seem to have a setup where all the
cgroup controllers are mounted on /sys/fs/cgroup rather than
any /sys/fs/cgroup/<controller> name. In the loop which detects
which controllers are present for a mount point we were modifying
'mnt_dir' field in the 'struct mntent' var, but not always restoring
the original value. This caused detection to break in the all-in-one
mount setup.
Fix that logic bug and add test case coverage for this mount
setup.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
ARM v7 can operate in either little or big endian modes. Add
support for the big-endian version known as armv7b from uname.
Signed-off-by: Yogesh Tillu <tillu.yogesh@gmail.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch changes virFileLoopDeviceOpen() to use the new loop-control
device to allocate a new loop device. If this behavior is unsupported
we fall back to the previous method of searching /dev for a free device.
With this patch you can start as many image based LXC domains as you
like (well almost).
Fixes bug https://bugzilla.redhat.com/show_bug.cgi?id=995543
The VIR_FREE() macro will cast away any const-ness. This masked a
number of places where we passed a 'const char *' string to
VIR_FREE. Fortunately in all of these cases, the variable was not
in fact const data, but a heap allocated string. Fix all the
variable declarations to reflect this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When virGetUserEnt() and virGetGroupEnt() fail due to the uid or gid not
existing on the machine they'll print a message like:
$ virsh -c vbox:///session list
error: failed to connect to the hypervisor
error: Failed to find user record for uid '32655': Success
The success at the end is a bit confusing. This changes it to:
$ virsh -c vbox:///session list
error: failed to connect to the hypervisor
error: Failed to find user record for uid '32655'
Currently, kernel supports up to 8 queues for a multiqueue tap device.
However, if user tries to enter a huge number (e.g. one million) the tap
allocation fails, as expected. But what is not expected is the log full
of warnings:
warning : virFileClose:83 : Tried to close invalid fd 0
The problem is, upon error we iterate over an array of FDs (handlers to
queues) and VIR_FORCE_CLOSE() over each item. However, the array is
pre-filled with zeros. Hence, we repeatedly close stdin. Ouch.
But there's more. The queues allocation is done in virNetDevTapCreate()
which cleans up the FDs in case of error. Then, its caller, the
virNetDevTapCreateInBridgePort() iterates over the FD array and tries to
close them too. And so does qemuNetworkIfaceConnect() and
qemuBuildInterfaceCommandLine().
FreeBSD 10 recently changed their definition of RAND_MAX, to try
and cover the fact that their evenly distributed results of rand()
really are a smaller range than a full power of 2. As a result,
I did some investigation, and learned:
1. POSIX requires random() to be evenly distributed across exactly
31 bits. glibc also guarantees this for rand(), but the two are
unrelated, and POSIX only associates RAND_MAX with rand().
Avoiding RAND_MAX altogether thus avoids a build failure on
FreeBSD 10.
2. Concatenating random bits from a PRNG will NOT provide uniform
coverage over the larger value UNLESS the period of the original
PRNG is at least as large as the number of bits being concatenated.
Simple example: suppose that RAND_MAX were 1 with a period of 2**1
(which means that the PRNG merely alternates between 0 and 1).
Concatenating two successive rand() calls would then invariably
result in 01 or 10, which is a rather non-uniform distribution
(00 and 11 are impossible) and an even worse period (2**0, since
our second attempt will get the same number as our first attempt).
But a RAND_MAX of 1 with a period of 2**2 (alternating between
0, 1, 1, 0) provides sane coverage of all four values, if properly
tempered. (Back-to-back calls would still only see half the values
if we don't do some tempering). We therefore want to guarantee a
period of at least 2**64, preferably larger (as a tempering factor);
POSIX only makes this guarantee for random() with 256 bytes of info.
* src/util/virrandom.c (virRandomBits): Use constants that are
accurate for the PRNG we are using, not an unrelated PRNG.
(randomState): Ensure the period of our PRNG exceeds our usage.
Signed-off-by: Eric Blake <eblake@redhat.com>
Re-arrange the code so that the returned bitmap is always initialized to
NULL even on early failures and return an error message as some callers
are already expecting it. Fix up the rest not to shadow the error.
On hosts that don't have the DBus service running or installed the new
systemd cgroups code failed with hard error instead of falling back to
"manual" cgroup creation.
Use the new helper to check for the system bus and use the fallback code
in case it isn't available.
Some systems may not use DBus in their system. Add a method to check if
the system bus is available that doesn't print error messages so that
code can later check for this condition and use an alternative approach.
The virBitmapParse function was calling virBitmapIsSet() function that
requires the caller to check the bounds of the bitmap without checking
them. This resulted into crashes when parsing a bitmap string that was
exceeding the bounds used as argument.
This patch refactors the function to use virBitmapSetBit without
checking if the bit is set (this function does the checks internally)
and then counts the bits in the bitmap afterwards (instead of keeping
track while parsing the string).
This patch also changes the "parse_error" label to a more common
"error".
The refactor should also get rid of the need to call sa_assert on the
returned variable as the callpath should allow coverity to infer the
possible return values.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=997367
Thanks to Alex Jia for tracking down the issue. This issue is introduced
by commit 0fc8909.
- Convert virCgroupGet* to VIR_CGROUP_SUPPORTED
- Convert virCgroup(Get|Set)FreezerState to VIR_CGROUP_SUPPORTED
Signed-off-by: Eric Blake <eblake@redhat.com>
- Introduce VIR_CGROUP_SUPPORTED conditional
- Convert virCgroupKill* to use it
- Convert virCgroupIsolateMount() to use it
- Convert virCgroupRemoveRecursively to VIR_CGROUP_SUPPORTED
Signed-off-by: Eric Blake <eblake@redhat.com>
Make future patches smaller by matching a sane header listing in
the first place. No semantic change.
* src/util/vircgroup.h: Move free next to new, and controller
functions next to each other.
* src/util/vircgroup.c (virCgroupFree, virCgroupHasController)
(virCgroupPathOfController, virCgroupRemoveRecursively)
(virCgroupRemove): Sort implementation to be closer to header.
Signed-off-by: Eric Blake <eblake@redhat.com>
Avoid a forward declaration of a static function.
* src/util/vircgroup.c (virCgroupPartitionNeedsEscaping)
(virCgroupParticionEscape): Move up.
Signed-off-by: Eric Blake <eblake@redhat.com>
Format all functions with two blank lines between, and return type
on separate line from function name. Also break some lines longer
than 80 columns. This makes the subsequent macro refactoring
less noisy.
* src/util/vircgroup.c: Match prevailing style.
Signed-off-by: Eric Blake <eblake@redhat.com>
Recentish (2011) kernels introduced a new device called /dev/loop-control,
which causes libvirt's detection of loop devices to get confused
since it only checks for a prefix of 'loop'. Also check that the
next character is a digit
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This is a second attempt at fixing the problem first attempted
in commit 2df8d99; basically undoing the fact that it was
reverted in commit 43cee32f, plus fixing two more issues: the
code in configure.ac has to EXACTLY match virnetdevbridge.c
with regards to declaring in6 types before using if_bridge.h,
and the fact that RHEL 5 has even more conflicts:
In file included from util/virnetdevbridge.c:49:
/usr/include/linux/in6.h:47: error: conflicting types for 'in6addr_any'
/usr/include/netinet/in.h:206: error: previous declaration of 'in6addr_any' was here
/usr/include/linux/in6.h:49: error: conflicting types for 'in6addr_loopback'
/usr/include/netinet/in.h:207: error: previous declaration of 'in6addr_loopback' was here
The rest of this commit message borrows from the original try
of 2df8d99:
A fresh checkout on a RHEL 6 machine with these packages:
kernel-headers-2.6.32-405.el6.x86_64
glibc-2.12-1.128.el6.x86_64
failed to configure with this message:
checking for linux/if_bridge.h... no
configure: error: You must install kernel-headers in order to compile libvirt with QEMU or LXC support
Digging in config.log, we see that the problem is identical to
what we fixed earlier in commit d12c2811:
configure:98831: checking for linux/if_bridge.h
configure:98853: gcc -std=gnu99 -c -g -O2 conftest.c >&5
In file included from /usr/include/linux/if_bridge.h:17,
from conftest.c:559:
/usr/include/linux/in6.h:31: error: redefinition of 'struct in6_addr'
/usr/include/linux/in6.h:48: error: redefinition of 'struct sockaddr_in6'
/usr/include/linux/in6.h:56: error: redefinition of 'struct ipv6_mreq'
configure:98860: $? = 1
I had not hit it earlier because I was using incremental builds,
where config.cache had shielded me from the kernel-headers breakage.
* configure.ac (if_bridge.h): Avoid conflicting type definitions.
* src/util/virnetdevbridge.c (includes): Also sanitize for RHEL 5.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 3d0e3c1 reintroduced a problem previously squelched in
commit 7e5aa78. Add a syntax check this time around.
util/virutil.c: In function 'virGetGroupList':
util/virutil.c:1015: error: 'for' loop initial declaration used outside C99 mode
* cfg.mk (sc_prohibit_loop_var_decl): New rule.
* src/util/virutil.c (virGetGroupList): Fix offender.
Signed-off-by: Eric Blake <eblake@redhat.com>
The change from initgroups to virGetGroupList/setgroups in
cab36cfe71ba83b71e536ba5c98e596f02b697b0 dropped the primary group from
processes group list iff the passed in group to virGetGroupList differs
from the user's primary group.
So always include the primary group to bring back the old behaviour.
Debian has the kvm group as primary group but uses
libvirt-qemu:libvirt-qemu as user:group to run the kvm process so
without this change the /dev/kvm is inaccessible.
The journald code would crash if a NULL was passed for the
filename / funcname in the logging code. This shouldn't
happen in general, but it is better to be safe, since there
have been bugs triggering this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
*src/util/virstoragefile.c: Add a helper function to get
the first name of missing backing files, if the name is NULL,
it means the diskchain is not broken.
*src/qemu/qemu_domain.c: qemuDiskChainCheckBroken(disk) to
check if its chain is broken
Make the virCgroupNewMachine method try to use systemd-machined
first. If that fails, then fallback to using the traditional
cgroup setup code path.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When systemd is involved in managing processes, it may start
killing off & tearing down croups associated with the process
while we're still doing virCgroupKillPainfully. We must
explicitly check for ENOENT and treat it as if we had finished
killing processes
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Systemd uses a named cgroup mount for tracking processes. Add
it as another type of controller, albeit one which we have to
special case in a number of places. In particular we must
never create/delete directories there, nor add tasks. Essentially
the systemd mount is to be considered read-only for libvirt.
With this change both the virCgroupDetectPlacement and
virCgroupCopyPlacement methods must be invoked. The copy
placement method will copy setup for resource controllers
only. The detect placement method will probe for any
named controllers, or resource controllers not already
setup.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are some interesting escaping rules to consider when dealing
with systemd slice/scope names. Thus it is helpful to have APIs
for formatting names
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This function is needed for virt-login-shell. Also modify virGirUserDirectory
to use the new function, to simplify the code.
Signed-off-by: Eric Blake <eblake@redhat.com>
The way we were casting small (<32bit) integers was broken
on big endian hosts, causing stack smashing. This was detected
in the test suite either by test failures due to incorrect
results, or by libc/gcc abort'ing with its stack canary
triggered.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Depending on the set of mingw packages installed, it is possible
that other .c files hit the mingw header pollution from the
virdbus.h file.
In file included from ../../src/rpc/virnetserver.c:39:0:
../../src/util/virdbus.h:41:35: error: expected ';', ',' or ')' before 'struct'
const char *interface,
^
* src/util/virdbus.h (virDBusCallMethod): Match .c file change.
Signed-off-by: Eric Blake <eblake@redhat.com>
On platforms without decent group support, the build failed:
Cannot export virGetGroupList: symbol not defined
./.libs/libvirt_security_manager.a(libvirt_security_manager_la-security_dac.o): In function `virSecurityDACPreFork':
/home/eblake/libvirt-tmp/build/src/../../src/security/security_dac.c:248: undefined reference to `virGetGroupList'
collect2: error: ld returned 1 exit status
* src/util/virutil.c (virGetGroupList): Provide dummy implementation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Our recent conversion to make VIR_ALLOC report oom wasn't
tested on mingw:
In file included from ../../src/util/virthread.c:29:0:
../../src/util/virthreadwin32.c: In function 'virCondWait':
../../src/util/virthreadwin32.c:166:81: error: 'VIR_FROM_THIS' undeclared (first use in this function)
if (VIR_REALLOC_N(c->waiters, c->nwaiters + 1) < 0) {
^
* src/util/virthreadwin32.c (VIR_FROM_THIS): Define.
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous patch was incomplete.
CC libvirt_util_la-vircgroup.lo
../../src/util/vircgroup.c:70:12: error: 'virCgroupPartitionEscape' declared 'static' but never defined [-Werror=unused-function]
static int virCgroupPartitionEscape(char **path);
^
* src/util/vircgroup.c (virCgroupPartitionEscape): Move forward
declaration inside conditional.
Signed-off-by: Eric Blake <eblake@redhat.com>
The virCgroupValidateMachineGroup method calls some functions
which are only conditionally compiled, thus it too must be
made conditional. This fixes the build on non-Linux hosts.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the app has provided a whitelist of controllers to be used,
we skip detecting its mount point. We still, however, fill in
the placement info which later confuses the machine name
validation code. Skip detecting placement if the controller
mount point is not set
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When a VM has an 'emulator' child cgroup present, we must
strip off that suffix when detecting the cgroup for a
machine
Rename the virCgroupIsValidMachineGroup method to
virCgroupValidateMachineGroup to make a bit clearer
that this isn't simply a boolean check, it will make
changes to the object.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupIsValidMachine does not need to be called from
outside the cgroups file now, so make it static.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of requiring drivers to use a combination of calls
to virCgroupNewDetect and virCgroupIsValidMachine, combine
the two into virCgroupNewDetectMachine
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
