These will be useful during the upcoming migration to common
templates for systemd units and will be dropped as soon as all
services have been converted.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It is currently considered required, but we're soon going to
provide a default that will be suitable for most services.
Since all services currently provide a value explicitly, we
can implement a default without breaking anything.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
They're similar to the existing socket_in/socket_out variables
and will make future changes nicer.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The idea behind these is to prevent running both modular daemons
and monolithic daemon at the same time. We will implement a more
effective solution for that shortly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virBitmapFormat returns the string that should be freed.
All strings in three ADD_BITMAP calls in qemuDomainGetGuestVcpusParams
are contained in tmp. So memory leak is possible here without VIR_FREE.
Fixes: 0108deb944
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that providing the value is optional, we can remove almost
all uses.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For most services, the socket paths can be derived trivially from
the name of the daemon: for virtqemud, for example, they will be
/run/libvirt/virtqemud-sock
/run/libvirt/virtqemud-sock-ro
/run/libvirt/virtqemud-admin-sock
libvirtd and virtproxyd are the exceptions, since their socket
paths will be
/run/libvirt/libvirt-sock
/run/libvirt/libvirt-sock-ro
/run/libvirt/libvirt-admin-sock
So we still need to be able to provide a custom @sockprefix@ in
those cases, but in the most common scenario we can do away with
the requirement by introducing a sensible default.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For most services, the value provided explicitly matches the
documented default.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The decision is based only on whether Polkit support is enabled,
so there's no need to go through it again for every single
service.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The meaning of the _def suffix might not be immediately obvious,
especially since it's also used to refer to the output of the
meson-gen-def.py script elsewhere in the same file.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The information is not used anywhere right now, but the
documentation for virt_daemon_units claims it's mandatory.
We also intend to actually start using it later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This tells systemd that the services in question support the
native socket activation protocol.
virtlogd and virtlockd, just like all the other daemons, implement
the necessary handshake.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While systemd will automatically match foo.socket with foo.service
based on their names, it's nicer to connect the two explicitly.
This is what we do for all services, with virtlogd and virtlockd
being the only exceptions.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This annotation being missing resulted in virtlogd and virtlockd
being marked as "indirect" services, i.e. services that cannot
be started directly but have to be socket activated instead.
While this is our preferred configuration, we shouldn't prevent
the admin to start them at boot if they want to.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When libvirtd, virtlog and virtlockd are enabled, we want their
admin sockets to be enabled for socket activation as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 93af79fb removed a cleanup label in favor of returning error
values directly in certain cases. But the final return value was changed
from -1 to 0. If we get to the end of the function, that means that
we've waited for the process to exit but it still exists. So we should
return -1. The error message was still being set correctly, but we were
returning a success status (0).
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In a modular daemon configuration, virtxend does not support the
virNetwork* APIs. It should open a connection to virtnetworkd when
using those APIs, but currently always opens a connection to
"xen:///system". Switch to using virGetConnectNetwork to obtain a
valid connection instead of using the hardcoded URI.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewing the code I found that return value of function
udev_device_get_sysattr_value() is dereferenced without a check.
udev_device_get_sysattr_value() may return NULL by number of reasons.
v2: VIR_DEBUG added, replaced STREQ(NULLSTR()) with STREQ_NULLABLE()
v3: More checks added, to skip earlier. More verbose VIR_DEBUG.
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
As of v9.4.0-rc2~5 it is possible to specify guest address where
a virtio-mem/virtio-pmem memory device is mapped to. What that
commit forgot to introduce was a check for overlaps.
And yes, this is technically an O(n^2) algorithm, as
virDomainMemoryDefValidate() is called over each memory device
and after this, virDomainMemoryDefValidate() also iterates over
each memory device. But given there's usually only a handful of
such devices, and this runs only when parsing domain XML I guess
code readability wins over some less obvious solution.
Resolves: https://issues.redhat.com/browse/RHEL-4452
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Inside of virDomainMemoryDefValidate() there's a check that
address where a virtio-mem memory device is mapped to is a
multiple of its block size. But this check is off by a couple of
bits, because the memory address is in bytes while the block size
is in kibibytes. Therefore, when checking whether address is a
multiple of the block size, the latter has to be multiplied by a
factor of 1024.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU mandates the VIRTIO_PMEM address is aligned to a pagesize.
This is a very reasonable requirement. So much so, that it
deserves to be in hypervisor agnostic validation code
(virDomainMemoryDefValidate()). Not that any other hypervisor
would support VIRTIO_PMEM yet. But even if they did, this would
surely be still valid.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current message can be misleading, because it seems to suggest
that no firmware of the requested type is available on the system.
What actually happens most of the time, however, is that despite
having multiple firmwares of the right type to choose from, none
of them is suitable because of lacking some specific feature or
being incompatible with some setting that the user has explicitly
enabled.
Providing an error message that describes exactly the problem is
not feasible, since we would have to list each candidate along
with the reason why we rejected it, which would get out of hand
quickly.
As a small but hopefully helpful improvement over the current
situation, reword the error message to make it clearer that the
culprit is not necessarily the firmware type, but rather the
overall domain configuration.
Suggested-by: Michael Kjörling <7d1340278307@ewoof.net>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our test driver lacks implementation for
virConnectGetDomainCapabilities(). Provide one, though a trivial
one. Mostly so that something else than VIR_ERR_NO_SUPPORT error
is returned.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As can be seen from previous commits, it's fairly easy to pass a
different type to virReportEnumRangeError() than the actual
variable is of. So far, we have a sizeof() hack to check if some
nonsensical types are not passed, e.g. it catches cases where a
function name is passed instead of an enum. Extend the hack to
check whether proper enum was passed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The @backend member of _virDomainVideoDef struct is of type
virDomainVideoBackendType. Pass the proper type to
virReportEnumRangeError().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The @virtPortOp variable inside of virNetDevVPortProfileOp8021Qbh
is of type virNetDevVPortProfileLinkOp. Pass the proper type to
virReportEnumRangeError().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This allows us to declare variables without using 'enum
virNetDev....' and will become more useful in the near future
(when virReportEnumRangeError() is fixed).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Function virGetConnectSecret() can return NULL so we need to check it
since in virSecretGetSecretString() it gets dereferenced.
Reported-by: coverity
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It's not possible to use password-protected ssh keys directly with
libvirt because libvirt doesn't have any way to prompt a user for the
password. To accomodate password-protected key files, an administrator
can add these keys to an ssh agent and then configure the domain with
the path to the ssh-agent socket.
Note that this requires an administrator or management app to
configure the ssh-agent with an appropriate socket path and add the
necessary keys to it. In addition, it does not currently work with
selinux enabled. The ssh-agent socket would need a label that libvirt
would be allowed to access rather than unconfined_t.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add the ability to specify a path to a ssh-agent socket in order to use
the ssh-agent to authenticate to remote ssh disks. Example
configuration:
<disk type='network'>
</source protocol='ssh' ...>
<identity username='myusername' agentsock='/path/to/socket'/>
...
</source>
...
</disk>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For ssh disks that are served by nbdkit, we can support logging in with
an ssh key file. Pass the path to the configured key file and the
username to the nbdkit process.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Authenticating via key file to an ssh server is often preferable to
logging in via password. In order to support this functionality add a
new <identity> xml element for ssh disks that allows the user to specify
a keyfile and username. Example configuration:
<disk type='network'>
<source protocol='ssh' ...>
<identity keyfile='/path/to/id_rsa' username='myusername'/>
...
</source>
...
</disk>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For ssh disks that are served by nbdkit, use the configured value for
knownHosts and pass it to the nbdkit process.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In order to make ssh disks usable, we need to be able to validate a
remote host. To do this, add a <knownHosts> xml element for ssh disks to
allow the user to specify a location for a file that contains known host
keys. Implementation to follow.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For ssh disks that are served by nbdkit, lookup the password from the
configured secret and securely pass it to the nbdkit process using fd
passing.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Right now, ssh network disks are not usable. There is some basic support
in libvirt that is meant to support disk chains that have backing disks
located at ssh urls, but there is no real way for a user to configure a
ssh-based disk. This commit allows users to configure an ssh disk with
password authentication. Implementation will follow.
<disk type='network'>
<source protocol='ssh' ...>
<auth username='myusername'>
<secret type='iscsi' usage='secretname'/>
</auth>
</disk>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When using nbdkit to serve a network disk source, the nbdkit process
will start and wait for an nbd connection before actually attempting to
connect to the (remote) disk location. Because of this, nbdkit will not
report an error until after qemu is launched and tries to read from the
disk. This results in a fairly user-unfriendly error saying that qemu
was unable to start because "Requested export not available".
Ideally we'd like to be able to tell the user *why* the export is not
available, but this sort of information is only available to nbdkit, not
qemu. It could be because the url was incorrect, or because of an
authentication failure, or one of many other possibilities.
To make this friendlier for users and easier to detect
misconfigurations, try to connect to nbdkit immediately after starting
nbdkit and before we try to start qemu. This requires adding a
dependency on libnbd. If an error occurs when connecting to nbdkit, read
back from the nbdkit error log and provide that information in the error
report from qemuNbdkitProcessStart().
User-visible change demonstrated below:
Previous error:
$ virsh start nbdkit-test
2023-01-18 19:47:45.778+0000: 30895: error : virNetClientProgramDispatchError:172 : internal
error: process exited while connecting to monitor: 2023-01-18T19:47:45.704658Z
qemu-system-x86_64: -blockdev {"driver":"nbd","server":{"type":"unix",
"path":"/var/lib/libvirt/qemu/domain-1-nbdkit-test/nbdkit-libvirt-1-storage.socket"},
"node-name":"libvirt-1-storage","auto-read-only":true,"discard":"unmap"}: Requested export not
available
error: Failed to start domain 'nbdkit-test'
error: internal error: process exited while connecting to monitor: 2023-01-18T19:47:45.704658Z
qemu-system-x86_64: -blockdev {"driver":"nbd","server":{"type":"unix",
"path":"/var/lib/libvirt/qemu/domain-1-nbdkit-test/nbdkit-libvirt-1-storage.socket"},
"node-name":"libvirt-1-storage","auto-read-only":true,"discard":"unmap"}: Requested export not
available
After this change:
$ virsh start nbdkit-test
2023-01-18 19:44:36.242+0000: 30895: error : virNetClientProgramDispatchError:172 : internal
error: Failed to connect to nbdkit for 'http://localhost:8888/nonexistent.iso': nbdkit: curl[1]:
error: problem doing HEAD request to fetch size of URL [http://localhost:8888/nonexistent.iso]:
HTTP response code said error: The requested URL returned error: 404
error: Failed to start domain 'nbdkit-test'
error: internal error: Failed to connect to nbdkit for 'http://localhost:8888/nonexistent.iso]:
error: problem doing HEAD request to fetch size of URL [http://localhost:8888/nonexistent.iso]:
HTTP response code said error: The requested URL returned error: 404
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Adds the ability to monitor the nbdkit process so that we can take
action in case the child exits unexpectedly.
When the nbdkit process exits, we pause the vm, restart nbdkit, and then
resume the vm. This allows the vm to continue working in the event of a
nbdkit failure.
Eventually we may want to generalize this functionality since we may
need something similar for e.g. qemu-storage-daemon, etc.
The process is monitored with the pidfd_open() syscall if it exists
(since linux 5.3). Otherwise it resorts to checking whether the process
is alive once a second. The one-second time period was chosen somewhat
arbitrarily.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since the restart handler will trigger at an arbitrary time (when the
nbdkit process crashes, for instance), it's difficult to provide
feedback to the user if the restart is unsuccessful. Rather than just
relying on a warning in the log, taint the domain so that there will be
a slightly more user-visible notification.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We were testing the arguments that were being passed to qemu when a disk
was being served by nbdkit, but the arguments used to start nbdkit
itself were not testable. This adds a test to ensure that we're invoking
nbdkit correctly for various disk source definitions.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add a private function to peek at the list of send buffers in virCommand
so that it is testable
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For virStorageSource objects that contain an nbdkitProcess, start that
nbdkit process to serve that network drive and then pass the nbdkit
socket to qemu rather than sending the network url to qemu directly.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Rather than passing passwords and cookies (which could contain
passwords) to nbdkit via commandline arguments, use the alternate format
that nbdkit supports where we can specify a file descriptor which nbdkit
will read to get the password or cookies.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All users of virCommandSetSendBuffer() are using it to send sensitive
data to a child process. So, since these buffers contain sensitive
information, clear it with virSecureErase().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add xml to the private data for a disk source to represent the nbdkit
process so that the state can be re-created if the libvirt daemon is
restarted. Format:
<nbdkit>
<pidfile>/path/to/nbdkit.pid</pidfile>
<socketfile>/path/to/nbdkit.socket</socketfile>
</nbdkit>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This prepares encryption secrets and authentication secrets. When we add
nbdkit-backed network storage sources, we will not need to send
authentication secrets to qemu, since they will be sent to nbdkit
instead. So split this into two different functions.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add new DO_TEST_CAPS_LATEST_NBDKIT macro to test xml2argv for various
nbdkit capability scenarios.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
log stderr and stdout from nbdkit into its own log so that
nbdkit-related issues can be debugged more easily.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This code can be used by the nbdkit implementation for reading back
filtered log data for error reporting. Move it to qemuLogContext so that
it can be shared. Renamed to qemuLogContextReadFiltered().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This will allow us to use it for nbdkit logging in upcoming commits.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Allow to specify a basename for the log file so that
qemuDomainLogContextNew() can be used to create log contexts for
secondary loggers.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add some helper functions to build a virCommand object and run the
nbdkit process for a given virStorageSource.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Rather than hard-coding the nbdkit module directory, query the nbdkit
binary for the location to these directories. nbdkit provides a
--dump-config optiont that outputs this information and can be easily
parsed. We can also get the version from this output rather than
executing `nbdkit --version` separately.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
An object for storing information about a nbdkit process that is serving
a specific virStorageSource. At the moment, this information is just
stored in the private data of virStorageSource and not used at all.
Future commits will use this data to actually start a nbdkit process.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add the virFileCache implementation for nbdkit capabilities to the qemu
driver. This allows us to determine whether nbdkit is installed and
which plugins are supported. it also has persistent caching and the
capabilities are re-queried whenever something changes.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Implement the loadFile and saveFile virFileCacheHandlers callbacks so
that nbdkit capabilities are cached perstistently across daemon
restarts. The format and implementation is modeled on the qemu
capabilities, but simplified slightly.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Preparatory step for caching nbdkit capabilities. This patch implements
the newData and isValid virFileCacheHandlers callback functions.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since the libvirt documentation suggests to prefer GObject over
virObject, and since virObject is a GObject, change virFileCache to
allow GObjects as data.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In order to add caching of the nbdkit capabilities, we will need to
compare against file modification times, etc. So look up this
information when creating the nbdkit caps.
Add a nbdkit_moddir build option to allow the builder to specify the
location to look for nbdkit plugins and filters.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In future commits, we will optionally use nbdkit to serve some remote
disk sources. This patch queries to see whether nbdkit is installed on
the host and queries it for capabilities. The data will be used in later
commits.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There was support in the code for parsing protocol='ssh' on network disk
sources, but it was not present in the xml schema. Add this to the
schema.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When Domain-0 autoballooning is enabled, it's possible that memory may
need to be ballooned down in Domain-0 to accommodate the needs of another
virtual machine. libxlDomainFreeMemory handles this task, but due to a
logic bug is underflowing the variable containing Domain-0 new
target memory. The resulting huge numbers are filtered by
libxlSetMemoryTargetWrapper and memory is not changed.
Under the covers, libxlDomainFreeMemory uses Xen's libxl_set_memory_target
API, which includes a 'relative' parameter for specifying how to set the
target. If true, the target is an increment/decrement value over the
current memory, otherwise target is taken as an absolute value.
libxlDomainFreeMemory sets 'relative' to true, but never allows for
negative values by declaring the target memory variable as an unsigned.
Fix by declaring the variable as signed, which also requried adjusting
libxlSetMemoryTargetWrapper.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are few places where the following pattern occurs:
if (var)
other = g_strdup(var);
where @other wasn't initialized before g_strdup(). Checking for
var != NULL is useless in this case, as that's exactly what
g_strdup() does (in which case it returns NULL).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adds two new private methods to create metadata change events:
- virNetworkEventMetadataChangeNewFromNet()
- virNetworkEventMetadataChangeNewFromObj()
Signed-off-by: K Shiva Kiran <shiva_kr@riseup.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When changing the metadata via virNetworkSetMetadata(), we can
now emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of custom
metadata.
Signed-off-by: K Shiva Kiran <shiva_kr@riseup.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When making 'type' member of virDomainControllerDef to be of
virDomainControllerType rather than an int I forgot to update
bhyve_command.c.
Fixes: 27a653b893
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Inside of virDomainDiskSourceNVMeParse() we have
virXMLPropString() + virStrToLong_ull() combo. Switch to
virXMLPropULongLong() which does the same thing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and adjust the XML parsers to use
virXMLPropEnumDefault().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field, adjust the XML parsers to use virXMLPropEnum()
and fill in missing cases to switch() statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and adjust the XML parser to use
virXMLPropEnumDefault().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and adjust the XML parsers to use
virXMLPropEnum().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and adjust the XML parser to use
virXMLPropEnum().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and adjust the XML parser to use
virXMLPropEnum().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and fill in missing cases to switch()
statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field, and fill in missing cases to switch()
statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field, adjust the XML parsers to use virXMLPropEnum()
and fill in missing cases to switch() statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field, adjust the XML parser to use
virXMLPropEnumDefault() and fill in missing cases to switch()
statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and adjust the XML parser to use
virXMLPropEnum().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and adjust the XML parser to use
virXMLPropEnum().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'bus' member of _virDomainDiskDef is already declared of
virDomainDiskModel type. Hence, there is no need to typecast the
variable when passing to switch() statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'mode' member of _virDomainDiskDef is already declared of
virDomainDiskModel type. Hence, there is no need to typecast the
variable when passing to switch() statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'type' member of _virDomainDeviceDef is already declared of
virDomainDeviceType type. Hence, there is no need to typecast the
variable when passing to switch() statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'fsdriver' member of _virDomainFSDef is already declared of
virDomainFSDriverType type. Hence, there is no need to typecast
the variable when passing to switch() statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Inside of qemuDomainDeviceCalculatePCIConnectFlags() there's a
switch() which typecasts a variable of
virDomainHostdevSubsysSCSIVHostModelType type to the very same
type. This is useless.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are few places where a virDomainHostdevDef->source.subsys
is accessed without ->mode being checked. Mind you,
virDomainHostdevDef can be also in
VIR_DOMAIN_HOSTDEV_MODE_CAPABILITIES mode.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The point of virLXCControllerSetupHostdevCaps() is to access
.caps union member of given <hostdev/> source. And it does so in
the switch, but then, when reporting an error the .subsys member
is accessed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Requires recent qemu with support for the virtio-blk-vhost-vdpa device
and the ability to pass a /dev/fdset/N path for the vdpa path (8.1.0)
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1900770
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
vDPA block devices will also need the same consideration for memlock
limits as other vdpa devices, so consider these devices when calculating
memlock limits.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
qemuInterfaceVDPAConnect() was a helper function for connecting to the
vdpa device file. But in order to support other vdpa devices besides
network interfaces (e.g. vdpa block devices) make this function a bit
more generic.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Check whether the qemu binary supports the vdpa block driver. We can't
rely simply on the existence of the virtio-blk-vhost-vdpa block driver
since the first releases of qemu didn't support fd-passing for this
driver. So we have to check for the 'fdset' feature on the driver
object. This feature will be present in the qemu 8.1.0 release and was
merged to qemu in commit 98b126f5.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Inside of virSetUIDGIDWithCaps() there's a naked call to
capng_apply(), i.e. without any retval check. This is potentially
dangerous as capng_apply() may fail. Do the check and report an
error.
This also fixes the build on bleeding edge distros - like Fedora
rawhide - where the function is declared with 'warn unused
result' [1].
1: a0743c335c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Added in v0.6.5~14 the call to capng_get_caps_process() inside of
lxcContainerDropCapabilities() is not really explained in the
commit message. But looking into the libcap-ng sources it's to
initialize the internal state of the library.
But with recent libcap-ng commit [1] (which some bleeding edge
distros - like Fedora rawhide - already picked up) the function
has been marked as 'warn unused result'. Well, check for its
retval then.
1: a0743c335c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Refactor the version processing logic in ch driver to support versions
from non-release cloud-hypervisor binaries. This version also supports
versions with branch prefixes in them.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When configuring OVS interfaces/bridges we spawn 'ovs-vsctl' with
appropriate arguments and if it exited with a non-zero status we
report a generic error message, like "Unable to add port vnet0 to
OVS bridge ovsbr0". This is all cool, but the real reason why
operation failed is hidden in (debug) logs because that's where
virCommandRun() reports it unless caller requested otherwise.
This is a bit clumsy because then we have to ask users to turn on
debug logs and reproduce the problem again, e.g. [1].
Therefore, in cases where an error is reported to the user - just
read ovs-vsctl's stderr and include it in the error message. For
other cases (like VIR_DEBUG/VIR_WARN) - well they are meant to
end up in (debug) logs anyway.
1: https://mail.openvswitch.org/pipermail/ovs-discuss/2023-September/052640.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This was added in qemu commit 166b174188.
No additional features had to be added to libvirt.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The script that synchronizes cpu models from qemu,
sync_qemu_models_i386.py, ignores all features that begin with
"vmx-". Do the same for synchronizing cpu features so we do not
have to track irrelevant features individually.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The function was used only to fill the cpu models into fake
capabilities, whic no longer exists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's no longer needed in tests as we are no longer adding fake machines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virQEMUCapsAddCPUDefinitions' is used solely to populate fake cpu
models for the fake-caps tests. Note that and also populate the 'type'
field so that default cpu type can be propagated properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'display' option for the 'vfio-pci' device was added in qemu-2.12
and can't be compiled out. Assume support for the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported qemu versions have this feature and it can't be compiled
out. The logic is a bit more complex in this instance as the flag is
asserted if:
if (ARCH_IS_X86(qemuCaps->arch) &&
virQEMUCapsGet(qemuCaps, QEMU_CAPS_QUERY_CPU_MODEL_EXPANSION)) {
virQEMUCapsSet(qemuCaps, QEMU_CAPS_CPU_CACHE);
}
Now QEMU_CAPS_QUERY_CPU_MODEL_EXPANSION is available since qemu-2.8 but
only on certain architectures, thus we need to keep the flag itself, but
x86_64 is one of them.
The flag can be also assumed as qemuValidateDomainDefCpu rejects any
cache config on non-x86 arches.
Remove any use of the capability and drop the impossible test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Internally the preferred machine which is 'pc' for x86_64 must be kept
in the first place in the array of machines. This was not the case when
stripping the machine aliases for use in tests (so that test output
stays stable) where we've created a new entry for the alias. This means
that the original name (e.g. pc-i440fx-8.1) stayed in the first place.
To fix this we now swap the names around and create a new entry at the
end for the specific type. Additionally the default flag is not
propagated to the copy.
This is also visible now in the output of 'qemuxml2xmltest' as the test
cases which use the default machine type return to 'pc' instead of the
more specific name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The support for PIIX power management was added in qemu commit
v1.0-3094-g459ae5ea5a and the suport for ICH9 power management was added
in qemu commit v2.2.0-542-g6ac0d8d44c and both can't be compiled out.
This means we can always assume support for these features. Remove the
validation and impossible tests. Move relevant bits from
'q35-pm-disable' to 'q35' test case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The sole purpose of getDeviceType() is to parse a file that
contains one integer (and a newline character). Well, we already
have a function for that: virFileReadValueInt(). Use the latter
and drop the former.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The @i variable inside of virCHProcessSetupIOThreads() is a
typical loop counter - it's declared as size_t. But when passed
to VIR_DEBUG an invalid format directive is used (%ld). Fix that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The @niothreads inside of virCHMonitorGetIOThreads() is declared
as of size_t type. This would work, except the variable is then
passed to VIR_DEBUG with incorrect format directive (%ld) and
returned. But the function returns an int not size_t. Fix the
variable declaration and format directive.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The @maxvcpus variable inside of virCHDomainRefreshThreadInfo()
holds retval of virDomainDefGetVcpusMax() which returns an
unsigned int. Also, the variable is then passed to VIR_WARN()
with incorrect format directive (%ld). Switch variable to uint
and fix the format directive.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewing the sources, I noticed that, argumets order in
virCgroupGetMemoryStat() function call does not correspond
to the function declaration:
-instead of *activeAnon, &meminfo->inactive_anon is passed;
-instead of *inactiveAnon, &meminfo->active_anon is passed;
-instead of *activeFile, &meminfo->inactive_file is passed;
-instead of *inactiveFile, &meminfo->active_file is passed.
Fixes: e634c7cd0d ("lxc: Use virCgroupGetMemoryStat")
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When we parse <mac address="00:00:00:00:00:00"/> we keep that in memory
and pass it down to the hypervisor. However, that MAC address is not
strictly valid as it is not marked as locally administered (bit 0x02)
but it is not even globally unique. It is also used for loopback device
on Linux, for example. And QEMU sees such MAC address just as "not
specified" and generates a new one that libvirt does not even know
about. So to make the overall experience better we now generate it if
the supplied one is all clear.
Resolves: https://issues.redhat.com/browse/RHEL-974
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Domain related hook scripts are all fed with domain XML on their
stdin, except for bhyve. Fix this.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/528
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
_POSIX2_LINE_MAX is 2048. Allocate the buffers on the heap instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Rewrite the old-style parser to use virXMLNodeGetSubelementList
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rewrite the old-style parser to use virXMLNodeGetSubelementList
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rewrite the old-style parser to use virXMLNodeGetSubelementList
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use 'virXMLNodeGetSubelementList' instead of looping through XML nodes
and modernize the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The filtering of qemu capabilities by machine type doesn't seem to be
ever used, remove it and adjust callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All qemu versions have that command and cpu hotplug code now directly
probes the machine type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS flag is always asserted as all
qemu versions support the command and selectively cleared when copying
the capabilities for VM use if given machine type does not support cpu
hotplug.
Rework this to directly probe the machine as we now populate the data
also when re-connecting to a qemu instance after daemon restart, so that
the capability can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When reconnecting we populate only the capability flags from the XML as
we need to know the exact flags that were present when starting the VM.
On the other hand the machine type data is not stored as it wasn't
really used after startup. While storing all of the data into the status
XML would be theoretically possible, with machine-type specific data it
makes no sense to do so, and thus the data can be re-probed from the
current instance.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming patch will re-probe machines from the current qemu instance to
populate the private copy of qemuCaps after reconnecting to a running
instance. This is needed to be able to access the machine type data,
while storing them in the status XML seems to be an overkill, for
information which can be easily reprobed.
Export 'virQEMUCapsInitQMPArch' needed to populate the 'arch' field and
'virQEMUCapsProbeQMPMachineTypes'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Support for legacy cpu hotplug was removed a long time ago. At this
point this function only checks whether the current machine type
supports cpu hotplug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
They represent nanoseconds, and we accept such values already. Not that
anyone would use such values in the wild, but even one person testing
QEMU could put in a bigger value and will be bothered with validation
errors after every `virsh edit`. Also add a test for it.
Resolves: https://issues.redhat.com/browse/RHEL-1717
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
