We should call virDomainLiveConfigHelperMethod ASAP because this
function transfers VIR_DOMAIN_AFFECT_CURRENT to VIR_DOMAIN_AFFECT_LIVE
or VIR_DOMAIN_AFFECT_CONFIG. All other additional checks for those two
flags should consider that the user give us VIR_DOMAIN_AFFECT_CURRENT.
Remove the unnecessary check whether the domain is live in case of
VIR_DOMAIN_VCPU_GUEST because this check is done by
virDomainLiveConfigHelperMethod.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
by rewriting it completely from:
error: unsupported configuration: virtio only support device address
type 'PCI'
to:
error: unsupported configuration: virtio disk cannot have an address of type
drive
Since we now support CCW addresses as well.
While debugging the support for responding to qemu RX_FILTER_CHANGED
events, I had changed the "ignoring this event" log message from
VIR_DEBUG to VIR_WARN, but forgot to change it back before
pushing. Since many guest OSes make enough changes to multicast lists
and/or promiscuous mode settings to trigger this message, it's
starting to show up as a red herring in bug reports.
Add a few helpers that allow to operate with memory device definitions
on the domain config and use them to implement memory device coldplug in
the qemu driver.
Add support to start qemu instance with 'pc-dimm' device. Thanks to the
refactors we are able to reuse the existing function to determine the
parameters.
Make sure that libvirt has all vital information needed to reliably
represent configuration of guest's memory devices in case of a
migration.
This patch forbids migration in case the required slot number and module
base address are not present (failed to be loaded from qemu via
monitor).
When using 'dimm' memory devices with qemu, some of the information
like the slot number and base address need to be reloaded from qemu
after process start so that it reflects the actual state. The state then
allows to use memory devices across migrations.
This patch adds code that parses and formats configuration for memory
devices.
A simple configuration would be:
<memory model='dimm'>
<target>
<size unit='KiB'>524287</size>
<node>0</node>
</target>
</memory>
A complete configuration of a memory device:
<memory model='dimm'>
<source>
<pagesize unit='KiB'>4096</pagesize>
<nodemask>1-3</nodemask>
</source>
<target>
<size unit='KiB'>524287</size>
<node>1</node>
</target>
</memory>
This patch preemptively forbids use of the <memory> device in individual
drivers so the users are warned right away that the device is not
supported.
To enable memory hotplug the maximum memory size and slot count need to
be specified. As qemu supports now other units than mebibytes when
specifying memory, use the new interface in this case.
Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.
To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.
In the last section if the function determines that the config is
invalid when QEMU doesn't support the memory device the JSON config
object would be returned even if it doesn't make sense.
Assign the object to be returned only on success.
When no model is specified in the domain definition for
a scsi controller and the architectur is s390 than virtio-scsi
is set as default model.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit cf54c60699833b3791a5d0eb3eb5a1948c267f6b introduced the ability
to create missing storage volumes during migration. For network disks,
however, we may not necessarily be able to detect whether they already
exist -- there is no straight-forward way to map the disk to a storage
volume, and even if there were it's possible no configured storage pool
actually contains the disk.
It is better to assume the network disk exists in this case, rather than
aborting the migration completely. If the volume really is missing, QEMU
will generate an appropriate error later in the migration.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Wikipedia's list of common misspellings [1] has a machine-readable
version. This patch fixes those misspellings mentioned in the list
which don't have multiple right variants (as e.g. "accension", which can
be both "accession" and "ascension"), such misspellings are left
untouched. The list of changes was manually re-checked for false
positives.
[1] https://en.wikipedia.org/wiki/Wikipedia:Lists_of_common_misspellings/For_machines
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We've never set the cpuset.memory_migrate value to anything, keeping it
on default. However, we allow changing cpuset.mems on live domain.
That setting, however, don't have any consequence on a domain unless
it's going to allocate new memory.
I managed to make 'virsh numatune' move all the memory to any node I
wanted even without disabling libnuma's numa_set_membind(), so this
should be safe to use with it as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1198497
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1196934
When qemu exits during startup, libvirt includes the error from
/var/log/libvirt/qemu/vm.log in the error message:
$ virsh start test3
error: Failed to start domain test3
error: internal error: early end of file from monitor: possible problem:
2015-02-27T03:03:16.985494Z qemu-kvm: -numa memdev is not supported by
machine rhel6.5.0
The check for domain liveness added to qemuDomainObjExitMonitor
in commit dc2fd51f sometimes overwrites this error:
$ virsh start test3
error: Failed to start domain test3
error: operation failed: domain is no longer running
Fix the check to only report an error if there is none set.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Issue #1 - A call to virBitmapNew did not check if the allocation
failed which could lead to a NULL dereference
Issue #2 - When deleting the pin entries from the config file, the
code loops from the number of elements down to the "new" vcpu count;
however, the pin id values are numbered 0..n-1 not 1..n, so the "first"
pin attempt would never work. Luckily the check was for whether the
incoming 'n' (vcpu id) matched the entry in the array from 0..arraysize
rather than a dereference of the 'n' entry
In qemu 2.3, the migration status will include 'cancelling' in the
window between when an asynchronous cancel has been requested and
when the migration is actually halted. Previously, qemu hid this
state and reported 'active'. Libvirt manages the sequence okay
even when the string is unrecognized (that is, it will report an
unknown state:
Migration: [ 69 %]^Cerror: internal error: unexpected migration status in cancelling.
but the migration is still cancelled), but recognizing the string
makes for a smoother user experience.
* src/qemu/qemu_monitor.h
(QEMU_MONITOR_MIGRATION_STATUS_CANCELLING): Add enum.
* src/qemu/qemu_monitor.c (qemuMonitorMigrationStatus): Map it.
* src/qemu/qemu_migration.c (qemuMigrationUpdateJobStatus): Adjust
clients.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONGetMigrationStatusReply): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
virnetdevopenvswitch.h declares a few functions that can be called to
add ports to and remove them from OVS bridges, and retrieve the
migration data for a port. It does not contain any data definitions
that are used by domain_conf.h. But for some reason, domain_conf.h
virnetdevopenvswitch.h should be directly #including it. This adds a
few lines to the project, but saves all the files that don't need it
from the extra computing, and makes the dependencies more clear cut.
Problem Description:
When we set boot order for a vhost-user network interface, we found the boot index
doesn't work.
Cause of the Problem:
In the function qemuBuildVhostuserCommandLine(), it forcely set the arg bootindex of
function qemuBuildNicDevStr() to 0. Thus, the bootindex parameter got missing.
Solution:
Trans the arg bootindex down.
Signed-off-by: Gao Haifeng <gaohaifeng.gao@huawei.com>
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
When libvirt is starting a domain, it reports the state as SHUTOFF until
it's RUNNING. This is not ideal because domain startup may take a long
time (usually because of some configuration issues, firewalls blocking
access to network disks, etc.) and domain lists provided by libvirt look
awkward. One can see weird shutoff domains with IDs in a list of active
domains or even shutoff transient domains. In any case, it looks more
like a bug in libvirt than a normal state a domain goes through.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The function needs a pointer to the network to get list of DHCP
leases. The pointer is obtained via virNetworkLookupByName() which
requires callers to free the returned network once no longer needed.
Otherwise it's leaked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we allow HW address to be not present on our RPC layer,
don't error out if qemu-ga hasn't provided any.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1199182 documents that
after a series of disk snapshots into existing destination images,
followed by active commits of the top image, it is possible for
qemu 2.2 and earlier to end up tracking a different name for the
image than what it would have had when opening the chain afresh.
That is, when starting with the chain 'a <- b <- c', the name
associated with 'b' is how it was spelled in the metadata of 'c',
but when starting with 'a', taking two snapshots into 'a <- b <- c',
then committing 'c' back into 'b', the name associated with 'b' is
now the name used when taking the first snapshot.
Sadly, older qemu doesn't know how to treat different spellings of
the same filename as identical files (it uses strcmp() instead of
checking for the same inode), which means libvirt's attempt to
commit an image using solely the names learned from qcow2 metadata
fails with a cryptic:
error: internal error: unable to execute QEMU command 'block-commit': Top image file /tmp/images/c/../b/b not found
even though the file exists. Trying to teach libvirt the rules on
which name qemu will expect is not worth the effort (besides, we'd
have to remember it across libvirtd restarts, and track whether a
file was opened via metadata or via snapshot creation for a given
qemu process); it is easier to just always directly ask qemu what
string it expects to see in the first place.
As a safety valve, we validate that any name returned by qemu
still maps to the same local file as we have tracked it, so that
a compromised qemu cannot accidentally cause us to act on an
incorrect file.
* src/qemu/qemu_monitor.h (qemuMonitorDiskNameLookup): New
prototype.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDiskNameLookup):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorDiskNameLookup): New function.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskNameLookup)
(qemuMonitorJSONDiskNameLookupOne): Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit)
(qemuDomainBlockJobImpl): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Use the utilities introduced in the previous patches so the qemu
driver is able to create tap devices that are bound (and unbound
on domain destroyal) to Midonet virtual ports.
Signed-off-by: Antoni Segura Puimedon <toni+libvirt@midokura.com>
Only selected fields from the disk source were copied when cold updating
source in a CDROM drive. When such drive was backed by a network file
this resulted into corruption of the definition:
<disk type='network' device='cdrom'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='gluster' name='gluster-vol1(null)'>
<host name='localhost'/>
</source>
<target dev='vdc' bus='virtio'/>
<readonly/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</disk>
Update the whole source instead of cherry-picking elements.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1166024
By querying the qemu guest agent with the QMP command
"guest-network-get-interfaces" and converting the received JSON
output to structured objects.
Although "ifconfig" is deprecated, IP aliases created by "ifconfig"
are supported by this API. The legacy syntax of an IP alias is:
"<ifname>:<alias-name>". Since we want all aliases to be clubbed
under parent interface, simply stripping ":<alias-name>" suffices.
Note that IP aliases formed by "ip" aren't visible to "ifconfig",
and aliases created by "ip" do not have any specific name. But
we are lucky, as qemu guest agent detects aliases created by both.
src/qemu/qemu_agent.h:
* Define qemuAgentGetInterfaces
src/qemu/qemu_agent.c:
* Implement qemuAgentGetInterface
src/qemu/qemu_driver.c:
* New function qemuGetDHCPInterfaces
* New function qemuDomainInterfaceAddresses
src/remote_protocol-sructs:
* Define new structs
tests/qemuagenttest.c:
* Add new test: testQemuAgentGetInterfaces
Test cases for IP aliases, 0 or multiple ipv4/ipv6 address(es)
Signed-off-by: Nehal J Wani <nehaljw.kkd1@gmail.com>
We're parsing memballoon status period as unsigned int, but when we're
trying to set it, both we and qemu use signed int. That means large
values will get wrapped around to negative one resulting in error.
Basically the same problem as commit e3a7b874 was dealing with when
updating live domain.
QEMU changed the accepted value to int64 in commit 1f9296b5, but even
values as INT_MAX don't make sense since the value passed means seconds.
Hence adding capability flag for this change isn't worth it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140958
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In order not to leave old error messages set, this patch refactors the
code so the error is reported only when acted upon. The only such place
already rewrites any error, so cleaning up all the error reporting in
qemuMonitorSetMemoryStatsPeriod() is enough.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Patch 51f9f03a4ca50b070c0fbfb29748d49f583e15e1 introduces a regression
where if a blockCommit operation fails the disk is still marked as being
part of a block job but can't be unmarked later.
As pointed out by jtomko in his review of the IOThreads pinning code:
http://www.redhat.com/archives/libvir-list/2015-March/msg00495.html
there are some comments sprinkled in indicating IOThreads were using
the same structure as the VcpuPin code...
This is the first patch of a few that will change the virDomainVcpuPin*
structures and code to just virDomainPin* - starting with the data
structure naming...
During his review of the iothreads pin setting code, Pavel noted that
there was a potential memory leak with respect to how the newVcpuPin
is handled and the goto endjob's in failure paths which would not free
the memory. For reference, See:
http://www.redhat.com/archives/libvir-list/2015-March/msg00415.html
The memory sizes in qemu are aligned up to 1 MiB boundaries. There are
two places where this was done once for the total size and then for
individual NUMA cell sizes.
Add a function that will align the sizes in one place so that it's clear
where the sizes are aligned.
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.
To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.
The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.
Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
Surprisingly we did not grab a VM job when a block job finished and we'd
happily rewrite the backing chain data. This made it possible to crash
libvirt when queueing two backing chains tightly and other badness.
To fix it, add yet another handler to the helper thread that handles
monitor events that require a job.
