Commit Graph

13 Commits

Author SHA1 Message Date
Peter Krempa
e114b09157 qemu: caps: Always assume QEMU_CAPS_SMP_TOPOLOGY
Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50
prior to 0.12.0, our minimum supported qemu version.

$ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62
v0.11.0-rc0-449-gdc6b1c0
$ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab
v0.12.0-rc0~1477
2016-07-07 15:08:35 +02:00
Ján Tomko
ec9d19952a tests: always assume QEMU_CAPS_DRIVE_READONLY 2016-05-23 10:34:16 +02:00
Martin Kletzander
a89f05ba8d qemu: Shorten per-domain directory names
Per-domain directories were introduced in order to be able to
completely separate security labels for each domain (commit
f1f68ca334).  However when the domain
name is long (let's say a ridiculous 110 characters), we cannot
connect to the monitor socket because on length of UNIX socket address
is limited.  In order to get around this, let's shorten it in similar
fashion and in order to avoid conflicts, throw in an ID there as well.
Also save that into the status XML and load the old status XMLs
properly (to clean up after older domains).  That way we can change it
in the future.

The shortening can be seen in qemuxml2argv tests, for example in the
hugepages-pages2 case.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-03-01 07:15:29 +01:00
Michal Privoznik
d7db33bfe9 qemu: Specify format= iff disk source is not empty
Just recently, qemu forbade specifying format for sourceless
disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense.
If there's no file to open, why specify its format. Anyway, I
have a domain like this:

    <disk type='file' device='cdrom'>
      <driver name='qemu' type='raw'/>
      <target dev='hda' bus='ide'/>
      <readonly/>
      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
    </disk>

and obviously I am unable to start it. Therefore, a fix on our
side is needed too.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-01-05 16:41:16 +01:00
Daniel P. Berrange
f81e0d480e qemu: assume -drive format is always available
As of QEMU 0.10.0 the -drive format= parameter was added,
so the QEMU driver can assume it is always available.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:17 +00:00
Daniel P. Berrange
dc7f6c3d30 qemu: assume -uuid is always available
The -uuid arg was added in QEMU 0.10.0, so the QEMU driver can
assume it is always available.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:02 +00:00
Daniel P. Berrange
4588c2ce97 qemu: assume -name is always available
The -name arg was added in QEMU 0.9.1, so the QEMU driver can
assume it is always available.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:02 +00:00
Daniel P. Berrange
8afd34f2d8 tests: redo test argv file line wrapping
Back in

  commit bd6c46fa0c
  Author: Juerg Haefliger <juerg.haefliger@hp.com>
  Date:   Mon Jan 31 06:42:57 2011 -0500

    tests: handle backspace-newline pairs in test input files

all the test argv files were line wrapped so that the args
were less than 80 characters.

The way the line wrapping was done turns out to be quite
undesirable, because it often leaves multiple parameters
on the same line. If we later need to add or remove
individual parameters, then it leaves us having to redo
line wrapping.

This commit changes the line wrapping so that every
single "-param value" is one its own new line. If the
"value" is still too long, then we break on ',' or ':'
or ' ' as needed.

This means that when we come to add / remove parameters
from the test files line, the patch diffs will only
ever show a single line added/removed which will greatly
simplify review work.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-09 15:50:39 +00:00
Cole Robinson
a216e64872 qemu: Set QEMU_AUDIO_DRV=none with -nographic
On my machine, a guest fails to boot if it has a sound card, but not
graphical device/display is configured, because pulseaudio fails to
initialize since it can't access $HOME.

A workaround is removing the audio device, however on ARM boards there
isn't any option to do that, so -nographic always fails.

Set QEMU_AUDIO_DRV=none if no <graphics> are configured. Unfortunately
this has massive test suite fallout.

Add a qemu.conf parameter nographics_allow_host_audio, that if enabled
will pass through QEMU_AUDIO_DRV from sysconfig (similar to
vnc_allow_host_audio)
2013-09-02 16:53:39 -04:00
Eric Blake
684c90bfbc tests: split long lines
Long lines are harder to read and harder to diff; in fact, if lines get
too long (> 1000 bytes), it starts causing issues where git send-email
refuses to send patches for the file.  I've cleaned up the tests
directory in the past (see commits bd6c46f, 3b750d1), but new long
lines have been introduced in the meantime.

Why 90 instead of 80? Because there were too many tests on the fringe
edge, and I didn't want to edit that many files.

Add a syntax check to prevent future long lines.

* cfg.mk (sc_prohibit_long_lines): New rule.
* tests/qemuxml2argvdata/qemuxml2argv-*.args: Split lines of any
file with content longer than 90 columns.
* tests/storagevolxml2argvdata/*.argv: Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-07-18 10:08:04 -06:00
Vladislav Bogdanov
81af5336ac qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
Laine Stump
177db08775 qemu: add new disk device='lun' for bus='virtio' & type='block'
In the past, generic SCSI commands issued from a guest to a virtio
disk were always passed through to the underlying disk by qemu, and
the kernel would also pass them on.

As a result of CVE-2011-4127 (see:
http://seclists.org/oss-sec/2011/q4/536), qemu now honors its
scsi=on|off device option for virtio-blk-pci (which enables/disables
passthrough of generic SCSI commands), and the kernel will only allow
the commands for physical devices (not for partitions or logical
volumes). The default behavior of qemu is still to allow sending
generic SCSI commands to physical disks that are presented to a guest
as virtio-blk-pci devices, but libvirt prefers to disable those
commands in the standard virtio block devices, enabling it only when
specifically requested (hopefully indicating that the requester
understands what they're asking for). For this purpose, a new libvirt
disk device type (device='lun') has been created.

device='lun' is identical to the default device='disk', except that:

1) It is only allowed if bus='virtio', type='block', and the qemu
   version is "new enough" to support it ("new enough" == qemu 0.11 or
   better), otherwise the domain will fail to start and a
   CONFIG_UNSUPPORTED error will be logged).

2) The option "scsi=on" will be added to the -device arg to allow
   SG_IO commands (if device !='lun', "scsi=off" will be added to the
   -device arg so that SG_IO commands are specifically forbidden).

Guests which continue to use disk device='disk' (the default) will no
longer be able to use SG_IO commands on the disk; those that have
their disk device changed to device='lun' will still be able to use SG_IO
commands.

*docs/formatdomain.html.in - document the new device attribute value.
*docs/schemas/domaincommon.rng - allow it in the RNG
*tests/* - update the args of several existing tests to add scsi=off, and
 add one new test that will test scsi=on.
*src/conf/domain_conf.c - update domain XML parser and formatter

*src/qemu/qemu_(command|driver|hotplug).c - treat
 VIR_DOMAIN_DISK_DEVICE_LUN *almost* identically to
 VIR_DOMAIN_DISK_DEVICE_DISK, except as indicated above.

Note that no support for this new device value was added to any
hypervisor drivers other than qemu, because it's unclear what it might
mean (if anything) to those drivers.
2012-01-09 10:55:53 -05:00
Jiri Denemark
f5534a135e tests: Add a test for correct disk device ordering 2011-06-01 19:14:08 +02:00