Commit Graph

20 Commits

Author SHA1 Message Date
Peter Krempa
e114b09157 qemu: caps: Always assume QEMU_CAPS_SMP_TOPOLOGY
Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50
prior to 0.12.0, our minimum supported qemu version.

$ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62
v0.11.0-rc0-449-gdc6b1c0
$ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab
v0.12.0-rc0~1477
2016-07-07 15:08:35 +02:00
Martin Kletzander
a89f05ba8d qemu: Shorten per-domain directory names
Per-domain directories were introduced in order to be able to
completely separate security labels for each domain (commit
f1f68ca334).  However when the domain
name is long (let's say a ridiculous 110 characters), we cannot
connect to the monitor socket because on length of UNIX socket address
is limited.  In order to get around this, let's shorten it in similar
fashion and in order to avoid conflicts, throw in an ID there as well.
Also save that into the status XML and load the old status XMLs
properly (to clean up after older domains).  That way we can change it
in the future.

The shortening can be seen in qemuxml2argv tests, for example in the
hugepages-pages2 case.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-03-01 07:15:29 +01:00
Michal Privoznik
d7db33bfe9 qemu: Specify format= iff disk source is not empty
Just recently, qemu forbade specifying format for sourceless
disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense.
If there's no file to open, why specify its format. Anyway, I
have a domain like this:

    <disk type='file' device='cdrom'>
      <driver name='qemu' type='raw'/>
      <target dev='hda' bus='ide'/>
      <readonly/>
      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
    </disk>

and obviously I am unable to start it. Therefore, a fix on our
side is needed too.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-01-05 16:41:16 +01:00
Daniel P. Berrange
f81e0d480e qemu: assume -drive format is always available
As of QEMU 0.10.0 the -drive format= parameter was added,
so the QEMU driver can assume it is always available.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:17 +00:00
Daniel P. Berrange
dc7f6c3d30 qemu: assume -uuid is always available
The -uuid arg was added in QEMU 0.10.0, so the QEMU driver can
assume it is always available.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:02 +00:00
Daniel P. Berrange
4588c2ce97 qemu: assume -name is always available
The -name arg was added in QEMU 0.9.1, so the QEMU driver can
assume it is always available.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:02 +00:00
Daniel P. Berrange
f78610038d qemu: assume -drive argument is always available
As of QEMU 0.9.1 the -drive argument can be used to configure
all disks, so the QEMU driver can assume it is always available
and drop support for -hda/-cdrom/etc.

Many of the tests need updating because a great many were
running without CAPS_DRIVE set, so using the -hda legacy
syntax.

Fixing the tests uncovered a bug in the argv -> xml
convertor which failed to handle disk with if=floppy.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:01 +00:00
Daniel P. Berrange
8afd34f2d8 tests: redo test argv file line wrapping
Back in

  commit bd6c46fa0c
  Author: Juerg Haefliger <juerg.haefliger@hp.com>
  Date:   Mon Jan 31 06:42:57 2011 -0500

    tests: handle backspace-newline pairs in test input files

all the test argv files were line wrapped so that the args
were less than 80 characters.

The way the line wrapping was done turns out to be quite
undesirable, because it often leaves multiple parameters
on the same line. If we later need to add or remove
individual parameters, then it leaves us having to redo
line wrapping.

This commit changes the line wrapping so that every
single "-param value" is one its own new line. If the
"value" is still too long, then we break on ',' or ':'
or ' ' as needed.

This means that when we come to add / remove parameters
from the test files line, the patch diffs will only
ever show a single line added/removed which will greatly
simplify review work.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-09 15:50:39 +00:00
Cole Robinson
a216e64872 qemu: Set QEMU_AUDIO_DRV=none with -nographic
On my machine, a guest fails to boot if it has a sound card, but not
graphical device/display is configured, because pulseaudio fails to
initialize since it can't access $HOME.

A workaround is removing the audio device, however on ARM boards there
isn't any option to do that, so -nographic always fails.

Set QEMU_AUDIO_DRV=none if no <graphics> are configured. Unfortunately
this has massive test suite fallout.

Add a qemu.conf parameter nographics_allow_host_audio, that if enabled
will pass through QEMU_AUDIO_DRV from sysconfig (similar to
vnc_allow_host_audio)
2013-09-02 16:53:39 -04:00
Vladislav Bogdanov
81af5336ac qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
Eric Blake
25b39315d6 tests: fix recent test failures
* tests/qemuxml2argvdata/qemuxml2argv-*.args: Reflect reserved VGA
port change.
2011-04-06 10:05:14 -06:00
Laine Stump
e9bd5c0e24 Add txmode attribute to interface XML for virtio backend
This is in response to:

   https://bugzilla.redhat.com/show_bug.cgi?id=629662

Explanation

qemu's virtio-net-pci driver allows setting the algorithm used for tx
packets to either "bh" or "timer". This is done by adding ",tx=bh" or
",tx=timer" to the "-device virtio-net-pci" commandline option.

'bh' stands for 'bottom half'; when this is set, packet tx is all done
in an iothread in the bottom half of the driver. (In libvirt, this
option is called the more descriptive "iothread".)

'timer' means that tx work is done in qemu, and if there is more tx
data than can be sent at the present time, a timer is set before qemu
moves on to do other things; when the timer fires, another attempt is
made to send more data. (libvirt retains the name "timer" for this
option.)

The resulting difference, according to the qemu developer who added
the option is:

    bh makes tx more asynchronous and reduces latency, but potentially
    causes more processor bandwidth contention since the cpu doing the
    tx isn't necessarily the cpu where the guest generated the
    packets.

Solution

This patch provides a libvirt domain xml knob to change the option on
the qemu commandline, by adding a new attribute "txmode" to the
<driver> element that can be placed inside any <interface> element in
a domain definition. It's use would be something like this:

    <interface ...>
      ...
      <model type='virtio'/>
      <driver txmode='iothread'/>
      ...
    </interface>

I chose to put this setting as an attribute to <driver> rather than as
a sub-element to <tune> because it is specific to the virtio-net
driver, not something that is generally usable by all network drivers.
(note that this is the same placement as the "driver name=..."
attribute used to choose kernel vs. userland backend for the
virtio-net driver.)

Actually adding the tx=xxx option to the qemu commandline is only done
if the version of qemu being used advertises it in the output of

    qemu -device virtio-net-pci,?

If a particular txmode is requested in the XML, and the option isn't
listed in that help output, an UNSUPPORTED_CONFIG error is logged, and
the domain fails to start.
2011-02-17 11:07:58 -05:00
Juerg Haefliger
bd6c46fa0c tests: handle backspace-newline pairs in test input files
This patch teaches testutil how to read multi-line input files with
backspace-newline line continuation markers.

The patch also breaks up all the single-line arguments test input files into
multi-line files with lines shorter than 80 characters.
2011-01-31 11:25:34 -07:00
Daniel P. Berrange
0e308c2c9f Re-arrange PCI device address assignment to match QEMU's default
To try and ensure that people upgrading from old QEMU get guests
with the same PCI device ordering, change the way we assign addrs
to match QEMU's default order. This should make Windows less
annoyed.

* src/qemu/qemu_conf.c: Follow QEMU's default PCI ordering
  logic when assigning addresses
* tests/*.args: Update for changed PCI addresses
2010-07-21 11:35:21 +01:00
Daniel P. Berrange
f310b25341 Add '-nodefconfig' command line arg to QEMU
We already use the '-nodefaults' command line arg with QEMU to stop
it adding any default devices to guests. Unfortunately, QEMU will
load global config files from /etc/qemu that may also add default
devices. These aren't blocked by '-nodefaults', so we need to also
add the '-nodefconfig' arg to prevent that.

Unfortunately these global config files are also used to define
custom CPU models. So in blocking global hardware device addition
we also block definitions of new CPU models. Libvirt doesn't know
about these custom CPU models though, so it would never make use
of them anyway. Thus blocking them via -nodefconfig isn't a show
stopping problem. We would need to expand libvirt's own CPU model
XML database to support these instead.

* src/qemu/qemu_conf.c: Add '-nodefconfig' if available
* tests/qemuxml2argvdata/: Add '-nodefconfig' to all data files which
  have '-nodefaults' present
2010-06-23 14:08:05 +01:00
Daniel P. Berrange
0943048ad0 Remove direct storage of hostnet_name & vlan
The current way of assigning names to the host network backend and
NIC device in QEMU was over complicated, by varying naming scheme
based on the NIC model and backend type. This simplifies the naming
to simply be 'net0' and 'hostnet0', allowing code to easily determine
the host network name and vlan based off the primary device alias
name 'net0'. This in turn allows removal of alot of QEMU specific
code from the XML parser, and makes it easier to assign new unique
names for NICs that are hotplugged

* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove hostnet_name
  and vlan fields from virNetworkDefPtr
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c:
  Use a single network alias naming scheme regardless of NIC type
  or backend type. Determine VLANs from the alias name.
* tests/qemuxml2argvdata/qemuxml2argv-net-eth-names.args,
  tests/qemuxml2argvdata/qemuxml2argv-net-virtio-device.args,
  tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args: Update
  for new simpler naming scheme
2010-02-02 16:31:47 +00:00
Daniel P. Berrange
49a0f6cd99 Remove use of -netdev arg with QEMU
The QEMU 0.12.x tree has the -netdev command line argument, but not
corresponding monitor command. We can't enable the former, without
the latter since it will break hotplug/unplug.

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Disable -netdev usage
  until 0.13 at earliest
* tests/qemuxml2argvtest.c: Add test for -netdev syntax
* tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args,
  tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.xml: Test
  data files for -netdev syntax
2010-02-02 16:31:47 +00:00
Daniel P. Berrange
b66924148a Convert VirtIO balloon over to -device syntax
Replace

   -balloon virtio

With

   -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3

This allows it to get correct assigned PCI address as declared in
previous patch

 * src/qemu/qemu_conf.c: Convert Virtio ballon to -device and
   give it an explicit PCI address
 * tests/qemuxml2argvdata/qemuxml2argv-*args: Add in virtio balloon
   where appropriate
2010-01-18 13:55:57 +00:00
Daniel P. Berrange
a44d0dc26c Auto-assign PCI addresses
Instead of relying on QEMU to assign PCI addresses and then querying
them with 'info pci', manually assign all PCI addresses before starting
the guest.  These addresses are not stable across reboots. That will
come in a later patch

NB, the PIIX3 (IDE, FDC, ISA-Bridge) will always have slot 1 and
VGA will always have slot 2. We declare the Virtio Balloon gets
slot 3, and then all remaining slots are for configured devices.

* src/qemu/qemu_conf.c: If -device is supported, then assign all PCI
  addresses when building the command line
* src/qemu/qemu_driver.c: Don't query monitor for PCI addresses if
  they have already been assigned
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address-device.args,
  tests/qemuxml2argvdata/qemuxml2argv-net-virtio-device.args,
  tests/qemuxml2argvdata/qemuxml2argv-sound-device.args,
  tests/qemuxml2argvdata/qemuxml2argv-watchdog-device.args: Update
  to include PCI slot/bus information
2010-01-18 13:55:57 +00:00
Daniel P. Berrange
1dd6f855c3 Convert NICs over to use -device & -netdev where possible
The current syntax uses a pair of args

   -net nic,macaddr=52:54:00:56:6c:55,vlan=3,model=pcnet,name=pcnet.0
   -net user,vlan=3,name=user.0

The new syntax does not  need the vlan craziness anymore, and
so has a simplified pair of args

   -netdev user,id=user.0
   -device pcnet,netdev=user.0,id=pcnet.0,mac=52:54:00:56:6c:55,addr=<PCI SLOT>
2010-01-18 13:55:56 +00:00