To allow matching up the data returned by query-cpus to entries in the
query-hotpluggable-cpus reply for CPU hotplug it's necessary to extract
the QOM path as it's the only link between the two.
QEMU reports whether 'query-hotpluggable-cpus' is supported for a given
machine type. Extract and cache the information using the capability
cache.
When copying the capabilities for a new start of qemu, mask out the
presence of QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS if the machine type
doesn't support hotpluggable cpus.
Prepare to extract more data by returning an array of structs rather than
just an array of thread ids. Additionally report fatal errors separately
from qemu not being able to produce data.
Turn various vshPrint() informative messages into vshPrintExtra(), so
they are not printed when requesting the quiet mode; neither XML/info
outputs nor the results of commands are affected.
Also change the expected outputs of the virsh-undefine test, since virsh
is invoked in quiet mode there.
Some informative messages might still be converted (and thus silenced
when in quiet mode), but this is an improvements nonetheless.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358179
For some unknown reason the original implementation of the <forwarder>
element only took advantage of part of the functionality in the
dnsmasq feature it exposes - it allowed specifying the ip address of a
DNS server which *all* DNS requests would be forwarded to, like this:
<forwarder addr='192.168.123.25'/>
This is a frontend for dnsmasq's "server" option, which also allows
you to specify a domain that must be matched in order for a request to
be forwarded to a particular server. This patch adds support for
specifying the domain. For example:
<forwarder domain='example.com' addr='192.168.1.1'/>
<forwarder domain='www.example.com'/>
<forwarder domain='travesty.org' addr='10.0.0.1'/>
would forward requests for bob.example.com, ftp.example.com and
joe.corp.example.com all to the DNS server at 192.168.1.1, but would
forward requests for travesty.org and www.travesty.org to
10.0.0.1. And due to the second line, requests for www.example.com,
and odd.www.example.com would be resolved by the libvirt network's own
DNS server (i.e. thery wouldn't be immediately forwarded) even though
they also match 'example.com' - the match is given to the entry with
the longest matching domain. DNS requests not matching any of the
entries would be resolved by the libvirt network's own DNS server.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1331796
If you define a libvirt virtual network with one or more IP addresses,
it starts up an instance of dnsmasq. It's always been possible to
avoid dnsmasq's dhcp server (simply don't include a <dhcp> element),
but until now it wasn't possible to avoid having the DNS server
listening; even if the network has no <dns> element, it is started
using default settings.
This patch adds a new attribute to <dns>: enable='yes|no'. For
backward compatibility, it defaults to 'yes', but if you don't want a
DNS server created for the network, you can simply add:
<dns enable='no'/>
to the network configuration, and next time the network is started
there will be no dns server created (if there is dhcp configuration,
dnsmasq will be started with "port=0" which disables the DNS server;
if there is no dhcp configuration, dnsmasq won't be started at all).
The new forward mode 'open' is just like mode='route', except that no
firewall rules are added to assure that any traffic does or doesn't
pass. It is assumed that either they aren't necessary, or they will be
setup outside the scope of libvirt.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=846810
==18324== 32 bytes in 1 blocks are still reachable in loss record 41 of 114
==18324== at 0x4C2C070: calloc (vg_replace_malloc.c:623)
==18324== by 0x4EA479B: virAlloc (viralloc.c:144)
==18324== by 0x4EA674A: virBitmapNewQuiet (virbitmap.c:77)
==18324== by 0x4EA67F7: virBitmapNew (virbitmap.c:106)
==18324== by 0x4EC777D: dnsmasqCapsNewEmpty (virdnsmasq.c:801)
==18324== by 0x4EC781B: dnsmasqCapsNewFromBuffer (virdnsmasq.c:815)
==18324== by 0x407CF4: mymain (networkxml2conftest.c:99)
==18324== by 0x409CF0: virTestMain (testutils.c:982)
==18324== by 0x4080EA: main (networkxml2conftest.c:136)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The script was returning success unless it failed on the last file.
This went unnoticed because sc_prohibit_long_lines forbids lines
longer than 90 characters in .arg[sv] files.
Check whether the disable-legacy property is present on the following
devices:
virtio-balloon-pci
virtio-blk-pci
virtio-scsi-pci
virtio-serial-pci
virtio-9p-pci
virtio-net-pci
virtio-rng-pci
virtio-gpu-pci
virtio-input-host-pci
virtio-keyboard-pci
virtio-mouse-pci
virtio-tablet-pci
Assuming that if QEMU knows other virtio devices where this property
is applicable, it will have at least one of these devices.
Added in QEMU by:
commit e266d421490e0ae83044bbebb209b2d3650c0ba6
virtio-pci: add flags to enable/disable legacy/modern
https://bugzilla.redhat.com/show_bug.cgi?id=1182074
Since libvirt still uses a legacy qemu arg format to add a disk, the
manner in which the 'password-secret' argument is passed to qemu needs
to change to prepend a 'file.' If in the future, usage of the more
modern disk format, then the prepended 'file.' can be removed.
Fix based on Jim Fehlig <jfehlig@suse.com> posting and subsequent
upstream list followups, see:
http://www.redhat.com/archives/libvir-list/2016-August/msg00777.html
for details. Introduced by commit id 'a1344f70'.
The first argument should be const char ** instead of
char **, because this is a search function and as such it
doesn't, and shouldn't, alter the haystack in any way.
This change means we no longer have to cast arrays of
immutable strings to arrays of mutable strings; we still
have to do the opposite, though, but that's reasonable.
If any of the devices referenced a USB hub that does not exist,
defining the domain would either fail with:
error: An error occurred, but the cause is unknown
(if only the last hub in the path is missing)
or crash.
Return a proper error instead of crashing.
https://bugzilla.redhat.com/show_bug.cgi?id=1367130
Commit 11567cf added some libxl tests into domaincapstest and
added libvirt_driver_libxl_impl.la to domaincapstest_LDADD.
This causes link fail on systems without GNU regex implementation:
gmake[2]: Entering directory '/usr/home/novel/code/libvirt/tests'
CCLD domaincapstest
../src/.libs/libvirt_driver_libxl_impl.a(libvirt_driver_libxl_impl_la-libxl_capabilities.o):
In function `libxlMakeCapabilities':
libxl/libxl_capabilities.c:(.text+0x6b2): undefined reference to
`rpl_regcomp'
libxl/libxl_capabilities.c:(.text+0x6d0): undefined reference to
`rpl_regerror'
libxl/libxl_capabilities.c:(.text+0x803): undefined reference to
`rpl_regexec'
libxl/libxl_capabilities.c:(.text+0xa58): undefined reference to
`rpl_regfree'
clang-3.8: error: linker command failed with exit code 1 (use -v to
see invocation)
This happens because on these system it tries to use gnulib's builtin
regex implementation, but doesn't link to gnulib.
Fix by adding $(GNULIB_LIBS) along with libvirt_driver_libxl_impl.la to
domaincapstest_LDADD.
It may happen that a developer wants to run just a specific
subset of tests:
tests $ VIR_TEST_RANGE=22 ../run ./virschematest
This now fails miserably:
==6840== Invalid read of size 8
==6840== at 0x4F397C0: virXMLValidatorValidate (virxml.c:1216)
==6840== by 0x402B72: testSchemaFile (virschematest.c:53)
==6840== by 0x403737: virTestRun (testutils.c:180)
==6840== by 0x402CF5: testSchemaDir (virschematest.c:98)
==6840== by 0x402EB1: testSchemaDirs (virschematest.c:131)
==6840== by 0x40314D: mymain (virschematest.c:194)
==6840== by 0x4051AF: virTestMain (testutils.c:982)
==6840== by 0x4035A9: main (virschematest.c:217)
==6840== Address 0x10 is not stack'd, malloc'd or (recently) free'd
Problem is, we are trying to do two types of tests here: validate
RNG schema itself, and validate XML files against RNG schemas.
And the latter tries to re-use a resource allocated in the
former. Therefore if the former is skipped (due to
VIR_TEST_RANGE) we have to allocate the resource manually.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When the user doesn't specify any model for a USB controller,
we use an architecture-dependent default, but we don't reflect
it in the guest XML.
Pick the default USB controller model when parsing the guest
XML instead of when creating the QEMU command line, so that
our choice is saved back to disk.
==8630== Invalid read of size 8
==8630== at 0x4EA4F0F: virFree (viralloc.c:582)
==8630== by 0x4F398F0: virXMLValidatorFree (virxml.c:1257)
==8630== by 0x40305C: mymain (virschematest.c:191)
==8630== by 0x405159: virTestMain (testutils.c:982)
==8630== by 0x403553: main (virschematest.c:215)
==8630== Address 0xcd72243 is 131 bytes inside a block of size 177 free'd
==8630== at 0x4C2B1F0: free (vg_replace_malloc.c:473)
==8630== by 0x4EA4F19: virFree (viralloc.c:582)
==8630== by 0x4ED0973: virFindFileInPath (virfile.c:1646)
==8630== by 0x405149: virTestMain (testutils.c:980)
==8630== by 0x403553: main (virschematest.c:215)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1353296
On UNIX like systems there are no constraints on what characters
can be in file/dir names (except for NULL, obviously). Moreover,
some values that we think of as paths (e.g. disk source) are not
necessarily paths at all. For instance, some hypervisors take
that as an arbitrary identifier and corresponding file is then
looked up by hypervisor in its table. Instead of trying to fix
our regular expressions (and forgetting to include yet another
character there), lets drop the validation completely.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
More misunderstanding/mistaken assumptions on my part - I had thought
that a pci-expander-bus could be plugged into any legacy PCI slot, and
that pcie-expander-bus could be plugged into any PCIe slot. This isn't
correct - they can both be plugged ontly into their respective root
buses. This patch adds that restriction.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358712
libvirt had allowed a dmi-to-pci-bridge to be plugged in anywhere a
normal PCIe endpoint can be connected, but this is wrong - it will
only work if it's plugged into pcie-root (the PCIe root complex) or a
pcie-expander-bus (the qemu device pxb-pcie). This patch adjusts the
connection flags accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1363648
Since the introduction of CMT features (commit v1.3.5-461-gf294b83)
starting a domain with host-model CPU on a host which supports CMT fails
because QEMU complains about unknown 'cmt' feature:
qemu-system-x86_64: CPU feature cmt not found
https://bugzilla.redhat.com/show_bug.cgi?id=1355857
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The generated command line wouldn't work since QEMU doesn't know what
'cmt' is. The following patch will fix this issue.
https://bugzilla.redhat.com/show_bug.cgi?id=1355857
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Doing a load, copy, format cycle on all QEMU capabilities XML files
should make sure we don't forget to update virQEMUCapsNewCopy when
adding new elements to QEMU capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In qemu, enabling this feature boils down to adding the following
onto the command line:
-global driver=cfi.pflash01,property=secure,value=on
However, there are some constraints resulting from the
implementation. For instance, System Management Mode (SMM) is
required to be enabled, the machine type must be q35-2.4 or
later, and the guest should be x86_64. While technically it is
possible to have 32 bit guests with secure boot, some non-trivial
CPU flags tuning is required (for instance lm and nx flags must
be prohibited). Given complexity of our CPU driver, this is not
trivial. Therefore I've chosen to forbid 32 bit guests for now.
If there's ever need, we can refine the check later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This element will control secure boot implemented by some
firmwares. If the firmware used in <loader/> does support the
feature we must tell it to the underlying hypervisor. However, we
can't know whether loader does support it or not just by looking
at the file. Therefore we have to have an attribute to the
element where users can tell us whether the firmware is secure
boot enabled or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since its release of 2.4.0 qemu is able to enable System
Management Module in the firmware, or disable it. We should
expose this capability in the XML. Unfortunately, there's no good
way to determine whether the binary we are talking to supports
it. I mean, if qemu's run with real machine type, the smm
attribute can be seen in 'qom-list /machine' output. But it's not
there when qemu's run with -M none. Therefore we're stuck with
version based check.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
A bunch of cases were only being tested for WHEN_ACTIVE or
WHEN_INACTIVE. Use WHEN_BOTH for all except the very few that
actually require the existing setup.
At the beginning of the test, some preparation work is done. For
instance new virSecurityManager is created. If this fails for
whatever reason, we try to fetch the latest error and print the
error message contained in it. However, if there's a bug in our
code and no error is reported, this approach will lead to crash,
while with virGetLastErrorMessage() it won't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1356937
Add the definitions to allow for viewing/setting cgroup period and quota
limits for IOThreads.
This is similar to the work done for emulator quota and period by
commit ids 'b65dafa' and 'e051c482'.
Being able to view/set the IOThread specific values is related to more
recent changes adding global period (commmit id '4d92d58f') and global
quota (commit id '55ecdae') definitions and qemu support (commit id
'4e17ff79' and 'fbcbd1b2'). With a global setting though, if somehow
the IOThread value in the cgroup hierarchy was set "outside of libvirt"
to a value that is incompatible with the global value.
Allowing control over IOThread specific values provides the capability
to alter the IOThread values as necessary.
Failure to parse the schema file would not trigger a test suite failure.
In addition to making the test fail it's necessary to split up the
parsing of the schema file into a separate test.
This is necessary as the XML validator uses libvirt errors to report
problems parsing of the actual schema RNG needs to be split out into a
separate function and called via virTestRun which has the
infrastructure to report them.
Rather than pass the disks[i]->info.alias to qemuMonitorSetDrivePassphrase
and then generate the "drive-%s" alias from that, let's use qemuAliasFromDisk
prior to the call to generate the drive alias and then pass that along
thus removing the need to generate the alias from the monitor code.
libxl configuration files conversion can now handle USB controllers.
When parting libxl config file, USB controllers with type PV are
ignored as those aren't handled.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
==2064442== 200 (88 direct, 112 indirect) bytes in 1 blocks are definitely lost in loss record 54 of 73
==2064442== at 0x4C2E0F0: calloc (vg_replace_malloc.c:711)
==2064442== by 0x18E75B80: virAllocVar (viralloc.c:560)
==2064442== by 0x18EC43B0: virObjectNew (virobject.c:193)
==2064442== by 0x18EC476E: virObjectLockableNew (virobject.c:219)
==2064442== by 0x1906BC73: virSecurityManagerNewDriver (security_manager.c:93)
==2064442== by 0x1906C076: virSecurityManagerNewStack (security_manager.c:115)
==2064442== by 0x43CC39: qemuTestDriverInit (testutilsqemu.c:548)
==2064442== by 0x4337ED: mymain (qemumonitorjsontest.c:2440)
==2064442== by 0x43BABE: virTestMain (testutils.c:982)
==2064442== by 0x43A490: main (qemumonitorjsontest.c:2558)
The current LUKS support has a "luks" volume type which has
a "luks" encryption format.
This partially makes sense if you consider the QEMU shorthand
syntax only requires you to specify a format=luks, and it'll
automagically uses "raw" as the next level driver. QEMU will
however let you override the "raw" with any other driver it
supports (vmdk, qcow, rbd, iscsi, etc, etc)
IOW the intention though is that the "luks" encryption format
is applied to all disk formats (whether raw, qcow2, rbd, gluster
or whatever). As such it doesn't make much sense for libvirt
to say the volume type is "luks" - we should be saying that it
is a "raw" file, but with "luks" encryption applied.
IOW, when creating a storage volume we should use this XML
<volume>
<name>demo.raw</name>
<capacity>5368709120</capacity>
<target>
<format type='raw'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</target>
</volume>
and when configuring a guest disk we should use
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/home/berrange/VirtualMachines/demo.raw'/>
<target dev='sda' bus='scsi'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</disk>
This commit thus removes the "luks" storage volume type added
in
commit 318ebb36f1
Author: John Ferlan <jferlan@redhat.com>
Date: Tue Jun 21 12:59:54 2016 -0400
util: Add 'luks' to the FileTypeInfo
The storage file probing code is modified so that it can probe
the actual encryption formats explicitly, rather than merely
probing existance of encryption and letting the storage driver
guess the format.
The rest of the code is then adapted to deal with
VIR_STORAGE_FILE_RAW w/ VIR_STORAGE_ENCRYPTION_FORMAT_LUKS
instead of just VIR_STORAGE_FILE_LUKS.
The commit mentioned above was included in libvirt v2.0.0.
So when querying volume XML this will be a change in behaviour
vs the 2.0.0 release - it'll report 'raw' instead of 'luks'
for the volume format, but still report 'luks' for encryption
format. I think this change is OK because the storage driver
did not include any support for creating volumes, nor starting
guets with luks volumes in v2.0.0 - that only since then.
Clearly if we change this we must do it before v2.1.0 though.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To allow using failover with gluster it's necessary to specify multiple
volume hosts. Add support for starting qemu with such configurations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add support for converting objects nested in arrays with a numbering
discriminator on the command line. This syntax is used for the
object-based specification of disk source properties.
Add a modular parser that will allow to parse 'json' backing definitions
that are supported by qemu. The initial implementation adds support for
the 'file' driver.
Due to the approach qemu took to implement the JSON backing strings it's
possible to specify them in two approaches.
The object approach:
json:{ "file" : { "driver":"file",
"filename":"/path/to/file"
}
}
And a partially flattened approach:
json:{"file.driver":"file"
"file.filename":"/path/to/file"
}
Both of the above are supported by qemu and by the code added in this
commit. The current implementation de-flattens the first level ('file.')
if possible and required. Other handling may be added later but
currently only one level was possible anyways.
For use with memory hotplug virQEMUBuildCommandLineJSONRecurse attempted
to format JSON arrays as bitmap on the command line. Make the formatter
function configurable so that it can be reused with different syntaxes
of arrays such as numbered arrays for use with disk sources.
This patch extracts the code and adds a parameter for the function that
will allow to plug in different formatters.
Until now the JSON->commandline convertor was used only for objects
created by qemu. To allow reusing it with disk formatter we'll need to
escape ',' as usual in qemu commandlines.
Refactor the command line generator by adding a wrapper (with
documentation) that will handle the outermost object iteration.
This patch also renames the functions and tweaks the error message for
nested arrays to be more universal.
The new function is then reused to simplify qemucommandutiltest.
As we already test that the extraction of the backing store string works
well additional tests for the backing store string parser can be made
simpler.
Export virStorageSourceNewFromBackingAbsolute and use it to parse the
backing store strings, format them using virDomainDiskSourceFormat and
match them against expected XMLs.
Failure to parse a XML that was not supposed to fail would result into a
crash in the test suite as the vcpu bitmap would not be filled prior to
the active XML->XML test.
Skip formatting of the vcpu snippet in the fake status XML formatter in
such case to avoid the crash. The test would fail anyways.
There's a plan to rework the address handling, so testcases
that verify hotplugging ccw devices will help in avoiding
regression.
In this commit, some files are duplicated because of the way
qemuhotplug.c calculates the expected xml filenames.
I plan on changing that to explicitly stating the basis domain
xml, the device xml, and the expected xml.
When parsing a command line with USB devices that have
no address specified, QEMU automatically adds a USB hub
if the device would fill up all the available USB ports.
To help most of the users, add one hub if there are more
USB devices than available ports. For wilder configurations,
expect the user to provide us with more hubs and/or controllers.
Resolves a CI test integration failure with a RHEL6/Centos6 environment.
In order to use a LUKS encrypted device, the design decision was to
generate an encrypted secret based on the master key. However, commit
id 'da86c6c' missed checking for that specifically.
When qemuDomainSecretSetup was implemented, a design decision was made
to "fall back" to a plain text secret setup if the specific cipher was
not available (e.g. virCryptoHaveCipher(VIR_CRYPTO_CIPHER_AES256CBC))
as well as the QEMU_CAPS_OBJECT_SECRET. For the luks encryption setup
there is no fall back to the plaintext secret, thus if that gets set
up by qemuDomainSecretSetup, then we need to fail.
Also, while the qemuxml2argvtest has set the QEMU_CAPS_OBJECT_SECRET
bit, it didn't take into account the second requirement that the
ability to generate the encrypted secret is possible. So modify the
test to not attempt to run the luks-disk if we know we don't have
the encryption algorithm.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1301021
Generate the luks command line using the AES secret key to encrypt the
luks secret. A luks secret object will be in addition to a an AES secret.
For hotplug, check if the encinfo exists and if so, add the AES secret
for the passphrase for the secret object used to decrypt the device.
Modify/augment the fakeSecret* in qemuxml2argvtest in order to handle
find a uuid or a volume usage with a specific path prefix in the XML
(corresponds to the already generated XML tests). Add error message
when the 'usageID' is not 'mycluster_myname'. Commit id '1d632c39'
altered the error message generation to rely on the errors from the
secret_driver (or it's faked replacement).
Add the .args output for adding the LUKS disk to the domain
Signed-off-by: John Ferlan <jferlan@redhat.com>
Partially resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1301021
If the volume xml was looking to create a luks volume take the necessary
steps in order to make that happen.
The processing will be:
1. create a temporary file (virStorageBackendCreateQemuImgSecretPath)
1a. use the storage driver state dir path that uses the pool and
volume name as a base.
2. create a secret object (virStorageBackendCreateQemuImgSecretObject)
2a. use an alias combinding the volume name and "_luks0"
2b. add the file to the object
3. create/add luks options to the commandline (virQEMUBuildLuksOpts)
3a. at the very least a "key-secret=%s" using the secret object alias
3b. if found in the XML the various "cipher" and "ivgen" options
Signed-off-by: John Ferlan <jferlan@redhat.com>
Cannot assume virGetLastError returns non-NULL value - modify the code to
fetch err and check if err && err->code
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
We were requiring a USB port path in the schema, but not enforcing it.
Omitting the USB port would lead to libvirt formatting it as (null).
Such domain cannot be started and will disappear after libvirtd restart
(since it cannot parse back the XML).
Only format the port if it has been specified and mark it as optional
in the XML schema.
Commit id's '9bbf0d7e6' and '2552fec24' added some XML parsing tests
for a LUKS volume to use a 'passphrase' secret format. After commit,
this was deemed to be incorrect, so covert the various tests to use
the volume usage format where the 'usage' is the path to the volume
rather than a user defined name string.
Also, removed the qemuxml2argv-luks-disk-cipher.xml since it was
just a duplicate of qemuxml2argv-luks-disks.xml.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit ca10bb040f introduced a new test that fails to build
on at least some architectures:
commandtest.c: In function 'test25':
commandtest.c:1121:5: error: comparison is always true due to
limited range of data type [-Werror=type-limits]
if (rv >= 0) {
^
Change the type of 'rv' from char to int, which is the proper
return type for virCommandExec() anyway.
We can't mock tests on Mingw, which lacks dlopen() and friends;
follow the paradigms used in other mock files of conditionally
compiling nothing when not building for Linux.
Signed-off-by: Eric Blake <eblake@redhat.com>
In an unlikely event of execve() failing, the virCommandExec()
function does not report any error, even though checks that are
at the beginning of the function are verbose when failing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Check whether QEMU supports -device intel-iommu
Note that the presence of this option does not mean that it's
usable because of a bug in earlier QEMU versions, but it's
better than nothing.
https://bugzilla.redhat.com/show_bug.cgi?id=1235580
Commit c9c03ea stopped creating an intermediate file during syntax-check
to save on execution time. It also switched to outputting the whole
incorrectly wrapped file instead of a diff needed to fix it.
Feed the newly wrapped file to diff via a pipe.
Note that fixing it by running test-wrap-argv.pl --in-place or
the unit test with VIR_TEST_REGENERATE_OUTPUT is easier.
Commit 843a70a changed test-wrap-argv.pl to use
/usr/bin/env perl
instead of
/usr/bin/perl
However when called from qemuxml2argvtest with
VIR_TEST_REGENERATE_OUTPUT, PATH is set to '/bin'.
Find the path to perl early in virTestMain, in case we
are going to need it later after we've overridden PATH.
In commit ec5dcf2a and b0b4a35c we have moved qemuhotplugtest's XMLs to
new directories but forgot to fix the Makefile. Add 2 directories in
EXTRA_DIST to fix broken VPATH build. Also remove now unused
qemuhotplugtestdata directory from the Makefile as well as from the
tree.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The libvirtdconftest was previously used to test data type
handling of the libvirtd config file. Now we're using the
typedef APIs, this test case has little value, and is pretty
hard to fixup with deal with the new APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently many users of virConf APIs are defining the same
macros for calling virConfValue() and then doing type
checking. To remove this repeated code, add a set of
typesafe accessor methods.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virconftest is different from all our other tests in that
the C program only tests a single in/out config file pair. It
relies on a shell wrapper to invoke it once for each test
file.
This gets rid of the shell wrapper and makes the C program
actually run over each test file using the normal test pattern.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This way we can safely differentiate what XMLs contain whole domain
definitions and which contain just devices. Thanks to that we can
test the domain XMLs in virschematest again.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This makes the search for related XMLs easier, plus they are not used in
the xml2argv tests anyway. This also makes future patches cleaner.
While on that remove unnecessary '-hotplug' from the filenames.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In the mock, we have a stub for virNetDevTapCreate(). However,
the mocked version does not exactly as it's native counterpart.
The function receives a string, which is an interface name that
caller would like to have, but it's not guaranteed that they will
get just that one. If they don't, the function free()-s the one
passed and returns the new one. Just like the mocked version. But
what is the mocked version missing is the free().
==1068== 6 bytes in 1 blocks are definitely lost in loss record 9 of 132
==1068== at 0x4C29F80: malloc (vg_replace_malloc.c:296)
==1068== by 0xDE13356: xmlStrndup (in /usr/lib64/libxml2.so.2.9.4)
==1068== by 0xAE2333E: virXMLPropString (virxml.c:479)
==1068== by 0xAE45975: virDomainNetDefParseXML (domain_conf.c:9038)
==1068== by 0xAE5C0BB: virDomainDefParseXML (domain_conf.c:16734)
==1068== by 0xAE5EB96: virDomainDefParseNode (domain_conf.c:17444)
==1068== by 0xAE5EA05: virDomainDefParse (domain_conf.c:17391)
==1068== by 0xAE5EA93: virDomainDefParseFile (domain_conf.c:17415)
==1068== by 0x433430: testCompareXMLToArgvFiles (qemuxml2argvtest.c:278)
==1068== by 0x433A18: testCompareXMLToArgvHelper (qemuxml2argvtest.c:414)
==1068== by 0x446ED4: virTestRun (testutils.c:179)
==1068== by 0x43A099: mymain (qemuxml2argvtest.c:1016)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It's just test, but why leak it?
==26971== 20 bytes in 1 blocks are definitely lost in loss record 623 of 704
==26971== at 0x4C29F80: malloc (vg_replace_malloc.c:296)
==26971== by 0xE560447: vasprintf (vasprintf.c:76)
==26971== by 0xAE0DEE2: virVasprintfInternal (virstring.c:480)
==26971== by 0xAE0DFF7: virAsprintfInternal (virstring.c:501)
==26971== by 0x4751F3: qemuProcessPrepareMonitorChr (qemu_process.c:2651)
==26971== by 0x4334B1: testCompareXMLToArgvFiles (qemuxml2argvtest.c:297)
==26971== by 0x4339AC: testCompareXMLToArgvHelper (qemuxml2argvtest.c:413)
==26971== by 0x446E7A: virTestRun (testutils.c:179)
==26971== by 0x445D33: mymain (qemuxml2argvtest.c:2029)
==26971== by 0x44886F: virTestMain (testutils.c:969)
==26971== by 0x445D9B: main (qemuxml2argvtest.c:2036)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Status XML tests were done by prepending a constant string to an
existing XML. With the planned changes the header will depend on data
present in the definition rather than just on the data that was parsed.
The first dynamic element in the header will be the vcpu thread list.
Reuse and rename qemuXML2XMLPreFormatCallback for gathering the relevant
data when checking the active XML parsing and formating and pass the
bitmap to a newly crated header generator.
As the empty bitmap exists, we should also test it. This patch adds
test cases for the procedures 'virBitmapNextSetBit', 'virBitmapLastSetBit',
'virBitmapNextClearBit'.
Tested-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
This is preferrable to -nographic which (in addition to disabling
graphics output) redirects the serial port to stdio and on OpenBIOS
enables the firmware's serial console.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For type='ethernet' interfaces only.
(This patch had been pushed earlier in
commit 0b4645a7e0, but was reverted in
commit 84d47a3cce because it had been
accidentally pushed during the freeze for release 2.0.0)
This is place as a sub-element of <source>, where other aspects of the
host-side connection to the network device are located (network or
bridge name, udp listen port, etc). It's a bit odd that the interface
we're configuring with this info is itself named in <target dev='x'/>,
but that ship sailed long ago:
<interface type='ethernet'>
<mac address='00:16:3e:0f:ef:8a'/>
<source>
<ip address='192.168.122.12' family='ipv4'
prefix='24' peer='192.168.122.1'/>
<ip address='192.168.122.13' family='ipv4' prefix='24'/>
<route family='ipv4' address='0.0.0.0'
gateway='192.168.122.1'/>
<route family='ipv4' address='192.168.124.0' prefix='24'
gateway='192.168.124.1'/>
</source>
</interface>
In practice, this will likely only be useful for type='ethernet', so
its presence in any other type of interface is currently forbidden in
the generic device Validate function (but it's been put into the
general population of virDomainNetDef rather than the
ethernet-specific union member so that 1) we can more easily add the
capability to other types if needed, and 2) we can retain the info
when set to an invalid interface type all the way through to
validation and report a proper error, rather than just ignoring it
(which is currently what happens for many other type-specific
settings).
(NB: The already-existing configuration of IP info for the guest-side
of interfaces is in subelements directly under <interface>, and the
name of the guest-side interface (when configurable) is in <guest
dev='x'/>).
(This patch had been pushed earlier in
commit fe6a77898a, but was reverted in
commit d658456530 because it had been
accidentally pushed during the freeze for release 2.0.0)
In order to use more common code and set up for a future type, modify the
encryption secret to allow the "usage" attribute or the "uuid" attribute
to define the secret. The "usage" in the case of a volume secret would be
the path to the volume as dictated by the backwards compatibility brought
on by virStorageGenerateQcowEncryption where it set up the usage field as
the vol->target.path and didn't allow someone to provide it. This carries
into virSecretObjListFindByUsageLocked which takes the secret usage attribute
value from from the domain disk definition and compares it against the
usage type from the secret definition. Since none of the code dealing
with qcow/qcow2 encryption secrets uses usage for lookup, it's a mostly
cosmetic change. The real usage comes in a future path where the encryption
is expanded to be a luks volume and the secret will allow definition of
the usage field.
This code will make use of the virSecretLookup{Parse|Format}Secret common code.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add a new secret type known as "passphrase" - it will handle adding the
secret objects that need a passphrase without a specific username.
The format is:
<secret ...>
<uuid>...</uuid>
...
<usage type='passphrase'>
<name>mumblyfratz</name>
</usage>
</secret>
Signed-off-by: John Ferlan <jferlan@redhat.com>
I'm not sure why our code claimed "-boot menu=on" cannot be used in
combination with per-device bootindex, but it was proved wrong about
four years ago by commit 8c952908. Let's always use bootindex when QEMU
supports it.
https://bugzilla.redhat.com/show_bug.cgi?id=1323085
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Verify that SCSI controllers get created automatically when a SCSI disk
is hot-plugged to a domain that doesn't have a matching SCSI controller
defined already.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Commit cf0568b0af moved a bunch of functions from virNetDev
to the more specific virNetDevIP; however, not all of the
existing uses were moved properly, causing build failures on
FreeBSD.
Complete the transition to the new names and drop the
obsolete declarations from the header file while at it.
This is place as a sub-element of <source>, where other aspects of the
host-side connection to the network device are located (network or
bridge name, udp listen port, etc). It's a bit odd that the interface
we're configuring with this info is itself named in <target dev='x'/>,
but that ship sailed long ago:
<interface type='ethernet'>
<mac address='00:16:3e:0f:ef:8a'/>
<source>
<ip address='192.168.122.12' family='ipv4'
prefix='24' peer='192.168.122.1'/>
<ip address='192.168.122.13' family='ipv4' prefix='24'/>
<route family='ipv4' address='0.0.0.0'
gateway='192.168.122.1'/>
<route family='ipv4' address='192.168.124.0' prefix='24'
gateway='192.168.124.1'/>
</source>
</interface>
In practice, this will likely only be useful for type='ethernet', so
its presence in any other type of interface is currently forbidden in
the generic device Validate function (but it's been put into the
general population of virDomainNetDef rather than the
ethernet-specific union member so that 1) we can more easily add the
capability to other types, and 2) we can retain the info when set to
an invalid interface type all the way through to validation and report
a proper error, rather than just ignoring it (which is currently what
happens for many other type-specific settings).
(NB: The already-existing configuration of IP info for the guest-side
of interfaces is in subelements directly under <interface>, and the
name of the guest-side interface (when configurable) is in <guest
dev='x'/>).
When support for <interface type='ethernet'> was added in commit
9a4b705f back in 2010, it erroneously looked at <source dev='blah'/>
for a user-specified guest-side interface name. This was never
documented though. (that attribute already existed at the time in the
data.ethernet union member of virDomainNetDef, but apparently had no
practical use - it was only used as a storage place for a NetDef's
bridge name during qemuDomainXMLToNative(), but even then that was
never used for anything).
When support for similar guest-side device naming was added to the lxc
driver several years later, it was put in a new subelement <guest
dev='blah'/>.
In the intervening years, since there was no validation that
ethernet.dev was NULL in the other drivers that didn't actually use
it, innocent souls who were adding other features assuming they needed
to account for non-NULL ethernet.dev when really they didn't, so
little bits of the usual pointless cargo-cult code showed up.
This patch not only switches the openvz driver to use the documented
<guest dev='blah'/> notation for naming the guest-side device (just in
case anyone is still using the openvz driver), and logs an error if
anyone tries to set <source dev='blah'/> for a type='ethernet'
interface, it also removes the cargo-cult uses of ethernet.dev and
<source dev='blah'/>, and eliminates if from the RNG and from
virDomainNetDef.
NB: I decided on this course of action after mentioning the
inconsistency here:
https://www.redhat.com/archives/libvir-list/2016-May/msg02038.html
and getting encouragement do eliminate it in a later IRC discussion
with danpb.
Now that we can include <interface type='ethernet'> in tests, we could
almost test XML that has an <ip> element in an interface. Except that
the test fails when it tries to actually set the IP address for the
interface's tap device. This patch mocks virNetDevSetIPAddress() to
just return success.
These had been declared in conf/device_conf.h, but then used in
util/virnetdev.c, meaning that we had to #include conf/device_conf.h
in virnetdev.c (which we have for a long time said shouldn't be done.
This caused a bigger problem when I tried to #include util/virnetdev.h
in a file in src/conf (which is allowed) - for some reason the
"device_conf.h: File not found" error.
The solution is to move the data types and functions used in util
sources from conf to util. Some names were adjusted during the move
("virInterface" --> "virNetDevIf", and "VIR_INTERFACE" -->
"VIR_NETDEV_IF")
Some Intel processor families (e.g. the Intel Xeon processor E5 v3
family) introduced some PQos (Platform Qos) features, including CMT
(Cache Monitoring technology) and MBM (Memory Bandwidth Monitoring),
to monitor or control shared resource. This patch add them into x86
part of cpu_map.xml to be used for applications based on libvirt to
get cpu capabilities. For example, Nova in OpenStack schedules guests
based on the CPU features that the host has.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
The VIR_STORAGE_POOL_EVENT_REFRESHED constant does not
reflect any change in the lifecycle of the storage pool.
It should thus not be part of the storage pool lifecycle
event set, but rather be a top level event in its own
right. Thus we introduce VIR_STORAGE_POOL_EVENT_ID_REFRESH
to replace it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In order to read 16 bits of data in the native format and convert add
the 16 bit macros to match existing 32 and 64 bit code.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This partially reverts commit 9b45c9f049.
It changed the default format of socket address from the one SASL
requires, but did not adjust all the callers.
It also removed the test coverage for it.
Revert most of the changes except the virSocketAddrFormatFull support
for URI-formatted strings.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1345743 while
reverting the format used by virt-admin's client-info command from
the URI one to the SASL one.
https://bugzilla.redhat.com/show_bug.cgi?id=1345743
In cases where we expect parse failure of the test input file the
testsuite can't differentiate if the parser failed when parsing or when
opening the file. Add a call to virFileExists and error out on missing
input files.
Missing output files are partially expected when regenerating test
output.
Move the enum into a new src/util/virsecret.h, rename it to be
virSecretLookupType. Add a src/util/virsecret.h in order to perform
a couple of simple operations on the secret XML and virSecretLookupTypeDef
for clearing and copying.
This includes quite a bit of collateral damage, but the goal is to remove
the "virStorage*" and replace with the virSecretLookupType so that it's
easier to to add new lookups that aren't necessarily storage pool related.
Signed-off-by: John Ferlan <jferlan@redhat.com>
qemuMonitorMigrationParams is a better name for a structure which
contains various migration parameters. While doing that, we should use
full names for individual parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Documentation for the "guest-set-vcpus" command describes a proper
algorithm how to set vcpus. This patch makes the following changes:
- state of cpus that has not changed is not updated
- if the command was partially successful the command is re-tried with
the rest of the arguments to get a proper error message
- code is more robust against malicious guest agent
- fix testsuite to the new semantics
Make them work again... The xml2xml had been working, but the xml2argv
were not working. Making the xml2argv work required a few adjustments to
the xml to update to more recent times.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since we support QEMU 0.12 and later, checking for support of specific flags
added prior to that isn't necessary.
Thus start with the base of having the "-o options" available for the
qemu-img create option and then determine whether we have the compat
option for qcow2 files (which would be necessary up through qemu 2.0
where the default changes to compat 0.11).
Adjust test to no long check for NONE and FLAG options as well was removing
results of tests that would use that option.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This script can already operate on a list of files.
Add a --check parameter to check if multiple files are wrapped
correctly with a single invocation of the script.
We have a list of parameters in @args, that need to be rewrapped
and separated by a space and escaped newline: " \\\n", with the
exception of the last one, which only needs a newline.
Instead of a for cycle, rewrap the individual arguments using map,
and interleave them with escaped newlines by using join.
This tests checks that the first word after SYNOPSIS
in virsh help ${command} output is ${command}.
This was only good to check that the command option structures
are valid, which is now served by 'virsh self-test'.
A new hidden command for virsh that will iterate over
all command groups and commands and print help for every single one.
This involves running vshCmddefOptParse so we can get an error if
one of the command's option structure is invalid.
Since e8ac4a7 this test wastes some CPU cycles by blindly trying to
run almost every virsh command, blindly throwing away the output
and the return value and returning success if 'virsh help' successfully
returned at least one command.
Drop it completely.
This will be used for the caller that needs to specify a separator.
Currently identical to virBitmapParse.
Also change one test case to use the new function.
The '-usb' option doesn't have any effect for aarch64 mach-virt
guests, so the fact that it's currently enabled by default is not
really causing any issue.
However, that might change in the future (although unlikely), and
having it as part of the QEMU command line can cause confusion to
someone looking through the process list.
Avoid it completely, like it's already happening for q35.
Commit 2a58ed0b added support for creating guests with USB
hostdevs. Commit fc21d10 later added support for hotplut of
USB hostdevs. Advertise support for USB hostdevs in the
domcapabilities.
In addition add the appropriate caps for USB support on
domaincapstest when libvirt is built on a Xen with
LIBXL_HAVE_PVUSB. Otherwise domaincapstest would fail i.e.
testing the wrong domain capabilities.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
There has been some progress lately in enabling virtio-pci on
aarch64 guests; however, guest OS support is still spotty at best,
so most guests are going to be using virtio-mmio instead.
Currently, mach-virt guests are closely modeled after q35 guests,
and that includes always adding a dmi-to-pci-bridge that's just
impossible to get rid of. While that's acceptable (if suboptimal)
for q35, where you will always need some kind of PCI device anyway,
mach-virt guests should be allowed to avoid it.
Our current detection code uses just the number of CPU features which
need to be added/removed from the CPU model to fully describe the CPUID
data. The smallest number wins. But this may sometimes generate wrong
results as one can see from the fixed test cases. This patch modifies
the algorithm to prefer the CPU model with matching signature even if
this model results in a longer list of additional features.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The CPU model was implemented in QEMU by commit f6f949e929.
The change to i7-5600U is wrong since it's a 5th generation CPU, i.e.,
Broadwell rather than Skylake, but that's just the result of our CPU
detection code (which is fixed by the following commit).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Until now, a Q35 domain (or arm/virt, or any other domain that has a
pcie-root bus) would always have a pci-bridge added, so that there
would be a hotpluggable standard PCI slot available to plug in any PCI
devices that might be added. This patch removes the explicit add,
instead relying on the pci-bridge being auto-added during PCI address
assignment (it will add a pci-bridge if there are no free slots).
This doesn't eliminate the dmi-to-pci-bridge controller that is
explicitly added whether or not a standard PCI slot is required (and
that is almost never used as anything other than a converter between
pcie.0's PCIe slots and standard PCI). That will be done separately.
This option allows or disallows detection of zero-writes if it is set to
"on" or "off", respectively. It can be also set to "unmap" in which
case it will try discarding that part of image based on the value of the
"discard" option.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit 11567cf66f introduced an include which will only work when
building with xen (particularly libxl). However, that file is supposed
to be includable from anywhere (as with other testutils* files.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add support to xenconfig for conversion of xl.cfg(5) bios config
to/from libvirt domXml <loader> config. SeaBIOS is the default
for HVM guests using upstream QEMU. ROMBIOS is the default when
using the old qemu-dm. This patch allows specifying OVMF as an
alternate firmware.
Example xl.cfg:
bios = "ovmf"
Example domXML:
<os>
...
<loader readonly='yes' type='pflash'>/usr/lib/xen/boot/ovmf.bin</loader>
</os>
Note that currently Xen does not support a separate nvram for
non-volatile variables.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The virQEMUDriverConfig object contains lists of
loader:nvram pairs to advertise firmwares supported by
by the driver, and qemu_conf.c contains code to populate
the lists, all of which is useful for other drivers too.
To avoid code duplication, introduce a virFirmware object
to encapsulate firmware details and switch the qemu driver
to use it.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
In 3704b9003 ("tests: Add CPU detection tests"), a macro called
DO_TEST_CPUID_JSON is added. But it took only two arguments when QEMU
or YAJL is not set.
Fix it by adding a third argument. Shouldn't have any effect because
that macro compiles to nothing.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1298070
We have the code for attaching redirdevs for ages now.
Unfortunately, our monitor code that handles talking to the qemu
process was missing a little piece of code that actually enabled
the feature.
BTW: it really is called "type" on the monitor, even though it's
called "name" on the cmd line. Don't ask.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Move all APIs with a virHostCPU name prefix out into new
util/virhostcpu.h & util/virhostcpu.c files
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In preparation for moving all the CPU related APIs out of
the nodeinfo file, give them a virHostCPU name prefix.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of having platform specific code in nodeGetInfo to
fetch CPU topology, split it all out into a new method
nodeGetCPUInfo.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Nearly all the methods in the nodeinfo file are given a
'const char *sysfs_prefix' parameter to override the
default sysfs path (/sys/devices/system). Every single
caller passes in NULL for this, except one use in the
unit tests. Furthermore this parameter is totally
Linux-specific, when the APIs are intended to be cross
platform portable.
This removes the sysfs_prefix parameter and instead gives
a new method linuxNodeInfoSetSysFSSystemPath for use by
the test suite.
For two of the methods this hardcodes use of the constant
SYSFS_SYSTEM_PATH, since the test suite does not need to
override the path for thos methods.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This new listen type is currently supported only by spice graphics.
It's introduced to make it easier and clearer specify to not listen
anywhere in order to start a guest with OpenGL support.
The old way to do this was set spice graphics autoport='no' and don't
specify any ports. The new way is to use <listen type='none'/>. In
order to be able to migrate to old libvirt the migratable XML will be
generated without the listen element and with autoport='no'. Also the
old configuration will be automatically converted to the this listen
type.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
VNC graphics already supports sockets but only via 'socket' attribute.
This patch coverts that attribute into listen type 'socket'.
For backward compatibility we need to handle listen type 'socket' and 'socket'
attribute properly to support old XMLs and new XMLs. If both are provided they
have to match, if only one of them is provided we need to be able to parse that
configuration too.
To not break migration back to old libvirt if the socket is provided by user we
need to generate migratable XML without the listen element and use only 'socket'
attribute.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Since commit 7140807917, qemu agent
channel cannot be plugged in because we won't generate its path
automatically. Let's not only fix that, but also add tests for it so
next time it's checked for.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1322210
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Until now, the only hot thing in this test was the name. That's because
we set the id to '-1' before every test. With this change, we test the
hotplug on live domains as the name suggests and as it should be.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
