A bug in qemuProcessStartWithMemoryState caused that we would start qemu
with '-loadvm SNAP' and '-incoming defer' together. qemu doesn't expect
that and crashes on an assertion failure [1].
[1]: https://issues.redhat.com/browse/RHEL-16782
Fixes: 8a88d3e586
Resolves: https://issues.redhat.com/browse/RHEL-17841
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
There are some platforms where 'char' is unsigned, by default
(RPi, s390x to name a few). And because of how test_demo is
written we are experiencing some test cases failing there. For
instance: /xdr/struct-scalar is failing. This is because in the
test (test_struct_scalar()), we have a struct with two chars. One
is initialized to 0xca, the other 0xfe (note that both have the
MSB set). The XDR encoder (xdr_TestStructScalar()) then calls
xdr_char() on both of them. But XDR itself has no notion of
char type, so under the hood, it expands it to int [1] and calls
xdr_int(). And this is where the problem lies. On platforms where
char is signed, the integer expansion results in 0xffffffca, but
on platforms where char is unsigned it results in 0x000000ca. Two
distinct results.
The test then goes and compares the encoded buffer with an
expected one (memcmp(), read from the disk earlier).
This poses no problem for real life use, because when decoding
those chars back, the padding is thrown away.
To avoid tickling this issue, use values that don't have the MSB
set.
1: https://git.linux-nfs.org/?p=steved/libtirpc.git;a=blob;f=src/xdr.c;h=28d1382cc4853ecf1238d792af5016160435d1e0;hb=HEAD#l487
Fixes: 40cbaa8fbe rpcgen: add test case for XDR serialization
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
The test_demo program compares whether XDR encoded data match the
expected output as read from a file. But the file path is not
absolute and thus relative to CWD which means the program can run
only from one specific directory.
Do what we do in the rest of our test suite: define 'abs_srcdir'
macro and prefix the path with it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
During CH driver initialization (chStateInitialize()) the
driver's capabilities bitmap is allocated
(virCHCapsInitCHVersionCaps()), but corresponding free call is
missing in chStateCleanup().
And while at it, reorder calls to virObjectUnref() inside of
chStateCleanup() to be the reverse order of that in
chStateInitialize() so that it's easier to spot missing
free/unref call.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We no longer use it, so commit a62486b95f correctly dropped
the Build-Requires; shortly afterwards, however, I accidentally
reintroduced it by mistake.
Fixes: 3df8cc658e
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The raw driver layer is not needed in this case and can be dropped.
Removing the nodename will cause other pieces of the code to pick up and
stop adding the layer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only caller was converted to use the common blockdev infrastructure
thus this function is no longer needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rewrite the code to use the common tooling for removing blockdevs
instead of the ad-hoc qemuBlockStorageSourceDetachOneBlockdev helper.
Use of the common infrastructure will properly handle cases when the raw
driver is ommited from the block graph.
Since the TLS data object is shared for all migration QMP commands and
objects we need to strip its alias from the definition of the storage
source before attempting to detach it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make the helper reopening a blockdev for access pick the correct layer
to reopen based on what is currently in use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the low level monitor API directly to test the QMP wrapper itself.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Take the virJSONValue array object which is passed to the
'blockdev-reopen' command as the 'options' argument rather than making
the caller wrap all the properties.
The code was a leftover from the time when the blockdev-reopen command
had a different syntax, and thus can be cleaned up.
Also note that the logging of the node name never worked as the top
level object didn't ever contain a 'node-name' property.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move all the logic into the new function and remove the old one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to preserve the wrappers for clarity but the inner logic can be
extracted to a common function qemuBlockReopenAccess. In further patches
the code from qemuBlockReopenFormat will be merged into the new wrapper
as well as logic for handling scenarios with missing 'format' layers
will be added.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Return the effective storage nodename if the format layer is not
present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to other bits of code, we don't need to setup the format layer
if it will not be formatted. Add logic which uses
qemuBlockStorageSourceNeedsFormatLayer to see whether the setup of the
format node is needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Setup the data for detaching of the 'format' layer only when it's
present.
Restructure the logic to follow the same order as
qemuBlockStorageSourceAttachPrepareBlockdev in terms of
format/slice/storage -blockdev objects, and drop the now-misleading
comment for 'slice' of raw disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Restructure the code logic so that the function is prepared for the
possibility that the 'format' blockdev layer may be missing if not
needed.
To achieve this we need to introduce logic that selects which node
(format/slice/storage) becomes the effective node and thus formats the
correct set of arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow using the slice layer as effective layer once we stop formatting
the unnecessary 'raw' driver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'format' layer is not required in certain cases. As the logic for
this will be a bit more involved create a helper function to do the
decision.
For now we'll keep to always format the 'format' -blockdev layer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a note stating that qemuBlockStorageSourceNeedsStorageSliceLayer
must be used only when setting up a new blockdev, any other case when
the device might been already set up must use the existence of the
nodename to do so.
Adjust qemuBlockStorageSourceAttachPrepareBlockdev to do so and refactor
qemuBlockStorageSourceDetachPrepare to use the same logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The helper retrieves the nodename of the slice layer if it's present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu allows and in some cases uses protocol driver names ('file',
'host_device', 'nbd', ...) in the 'backing file format' field of a qcow
to denote a image where the dummy 'raw' driver was not used on top.
Adapt our backing store parser for such cases. The examples added in
previous patch show the difference in behaviour.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU allows and in cases where you omit the not-strictly-needed 'raw'
driver on top of raw images automatically uses the protocol name inside
of the 'backing file format' field of the qcow2 image.
Libvirt expects only format names in that field.
Add example images showing this scenario, which will be fixed later.
The qcow2 image files in this commit were formatted as:
qemu-img create -f qcow2 -F nbd -b nbd+tcp://example.org:6000/blah -u qcow2-protocol-backing-nbd.qcow2 10M
and
qemu-img create -f qcow2 -F file -b raw qcow2-protocol-backing-file.qcow2
thus using 'nbd' and 'file' as backing format respectively.
(note that '-b raw' refers to the file in the example image folder)
To satisfy the test, note that the NBD image is also rejected as we
can't probe it, thus such configuration would not work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Compare also the detected format of the backing file
('backingStoreRawFormat' field) into the output data for comparison with
others. Since the ToString function can't convert VIR_STORAGE_FILE_AUTO
use also the numeric value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the return values by 0 because none of the callers care and some
of the backing store parser functions return this state also in cases
the rest of the code would consider as success.
Subsequently the parsers will be refactored and proper error reporting
returned.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we consider the failure of parsing the backing store to be
actually success based on the value we return to the caller, we should
continue parsing also features and the 'compat' field so that we don't
have a partial definition if e.g. the backing store format is not known.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
None of the backing store parser functions actually use it. Remove it to
avoid confusion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In v9.9.0-104-gc472ce024b I've introduced another value to
virDomainAudioType enum. But I forgot to add corresponding case
into switch() in bhyveBuildSoundArgStr().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently translated at 88.4% (9215 of 10415 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/ru/
Co-authored-by: Jan Tomko <jtomko@redhat.com>
Co-authored-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Jan Tomko <jtomko@redhat.com>
This is mostly straightforward, except for a teensy-weensy
detail: usually, there's no system wide daemon running, no system
wide available socket that anybody could connect to. PipeWire
uses a per user daemon approach instead. But this in turn means,
that the socket location floats between various locations and is
derived from various environment variables (just like the actual
socket name) and thus we must pass the variables to QEMU.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/560
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU gained support for PipeWire audio backend (see QEMU commit
of v8.0.0-403-gc2d3d1c294). Its configuration knobs are basically
the same as pulseaudio's, except for PA's server name. Therefore,
a lot of code is copied over from pulseadio and fixed by
s/Pulse/Pipewire/ or s/pulseaudio/pipewire/.
There's one ley difference to PA though: pipewire daemon is
usually on per user basis (just like our qemu:///session).
Therefore, introduce this 'runtimeDir' attribute, which allows
specifying path to pipewire daemon socket (useful for
qemu:///system for instance).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On systems with humongous pages (16GiB) and 32bit int it's easy
to hit integer overflow in virNumaGetPages(). What happens is,
inside of virNumaGetPages() as we process hugepages for given
NUMA node (e.g. in order to produce capabilities XML), we keep a
sum of sizes of pools in an ULL variable (huge_page_sum). In each
iteration, the variable is incremented by 1024 * page_size *
page_avail. Now, page_size is just an uint, so we have:
ULL += U * U * ULL;
and because of associativity, U * U is computed first and since
we have two operands of the same type, no type expansion happens.
But this means, for humongous pages (like 16GiB) the
multiplication overflows.
Therefore, move the multiplication out of the loop. This helps in
two ways:
1) now we have ULL += U * ULL; which expands the uint in
multiplication,
2) it saves couple of CPU cycles.
Resolves: https://issues.redhat.com/browse/RHEL-16749
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If any of the images in a chain above a raw image have bitmaps, libvirt
would attempt to merge them when doing a block commit or block copy
operation, which would result into a error in the logs as creating
persistent bitmaps in a raw image is not supported.
Since libvirt cares only about persistent bitmaps we can simply skip the
operation if the target of a block copy or block commit is a raw image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The VM will require access also to the detected images. Unfortunately a
recent reordering of the code introduced a bug where the backing chain
was probed after setting up cgroups/selinux/namespaces, which caused
that any detected images were not allowed/added and qemu was then not
able to use them.
Fixes: 9b8bb536ff
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virDomainMemoryDefCheckConflict() already does the same set
of checks. There's no need to duplicate them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since we're iterating over def->mems array, might as well check
for dimm slot duplicates.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
So far we check whether virtio-mem and/or virtio-pmem memory
devices do not overlap with each other. But we allow specifying
address where dimm and nvdimm memory devices are mapped too. And
there are left out from this collision check. Not anymore.
This leaves just sgx model out, but that's expected since it
can't have any address (see virDomainMemoryDefValidate()).
Resolves: https://issues.redhat.com/browse/RHEL-4452
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
At the end of virDomainMemoryDefValidate() there's a code that
checks whether two virtio-mem/virtio-pmem devices don't overlap.
Separate this code into its own function
(virDomainMemoryDefCheckConflict()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Differences from qemu:
* "vmx-ept-uc" (bit 8) and "vmx-ept-wb" (bit 14) are not added to
qemu's list of named features yet, but used in several qemu cpu
models never the less. Add to libvirt regardless.
* "vmx-invvpid-single-context" (bit 41) is erroneously called
"vmx-invept-single-context" in qemu. This is the name of the
feature associated with bit 25 in both libvirt and qemu.
* "vmx-invvpid-single-context-noglobals" (bit 43) is erroneously
called "vmx-invept-single-context-noglobals". Use the correct name.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
