The 'int virInterfaceIsActive()' method was directly returning the
value of the 'int active:1' bitfield in virIntefaceDefPtr. A bitfield
with a signed integer, will hold the values 0 and -1, not 0 and +1
as might be expected. This meant that virInterfaceIsActive() was
always returning -1 when the interface was active, not +1 & thus all
callers thought an error had occurred. To protect against this kind
of mistake again, change all bitfields to be unsigned ints
* daemon/libvirtd.h, src/conf/domain_conf.h, src/conf/interface_conf.h,
src/conf/network_conf.h: Change bitfields to unsigned int.
I noticed some debug messages are printed with an empty lines after
them. This patch removes these empty lines from all invocations of the
following macros:
VIR_DEBUG
VIR_DEBUG0
VIR_ERROR
VIR_ERROR0
VIR_INFO
VIR_WARN
VIR_WARN0
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The daemon will attempt to unregister domain events on client disconnect,
even if no events were ever registered. This raises an unneeded error.
Track in the qemu_client structure if events have been registered, and
check this when performing cleanup.
All other stateful drivers are linked directly to libvirtd
instead of libvirt.so. Link the secret driver to libvirtd too.
* daemon/Makefile.am: link the secret driver to libvirtd
* daemon/libvirtd.c: add #ifdef WITH_SECRETS blocks
* src/Makefile.am: don't link the secret driver to libvirt.so
* src/libvirt_private.syms: remove the secretRegister symbol
Use a dynamically sized xdr_array to pass memory stats on the wire. This
supports the addition of future memory stats and reduces the message size
since only supported statistics are returned.
* src/remote/remote_protocol.x: provide defines for the new entry point
* src/remote/remote_driver.c daemon/remote.c: implement the client and
server side
* daemon/remote_dispatch_args.h daemon/remote_dispatch_prototypes.h
daemon/remote_dispatch_ret.h daemon/remote_dispatch_table.h
src/remote/remote_protocol.c src/remote/remote_protocol.h: generated
stubs
* src/remote/remote_protocol.x: update with new entry point
* daemon/remote.c: add the new server dispatcher
* daemon/remote_dispatch_args.h daemon/remote_dispatch_prototypes.h
daemon/remote_dispatch_ret.h daemon/remote_dispatch_table.h
src/remote/remote_protocol.c src/remote/remote_protocol.h: regenerated
Replace free(virBufferContentAndReset()) with virBufferFreeAndReset().
Update documentation and replace all remaining calls to free() with
calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset()
and virReportOOMError() in OOM error cases.
On kernels with HZ=100, the resolution of sleeps in poll() is
quite bad. Doing a precise check on the expiry time vs the
current time will thus often thing the timer has not expired
even though we're within 10ms of the expected expiry time. This
then causes another pointless sleep in poll() for <10ms. Timers
do not need to have such precise expiration, so we treat a timer
as expired if it is within 20ms of the expected expiry time. This
also fixes the eventtest.c test suite on kernels with HZ=100
* daemon/event.c: Add 20ms fuzz when checking for timer expiry
The libvirtd initscript could get confused between the system and
session instances of the daemon. To avoid this it is neccessary
to check the pidfile explicitly.
* daemon/libvirtd.init.in: Always check the pidfile of the system
daemon to avoid confusion with the session daemons
* configure.in: add new --with-udev, disabled by default, and requiring
libudev > 145
* src/node_device/node_device_udev.c src/node_device/node_device_udev.h:
the new node device backend
* src/node_device/node_device_linux_sysfs.c: moved node_device_hal_linux.c
to a better file name
* src/conf/node_device_conf.c src/conf/node_device_conf.h: add a couple
of fields in node device definitions, and an API to look them up,
remove a couple of unused fields from previous patch.
* src/node_device/node_device_driver.c src/node_device/node_device_driver.h:
plug the new driver
* po/POTFILES.in src/Makefile.am src/libvirt_private.syms: add the new
files and symbols
* src/util/util.h src/util/util.c: add a new convenience macro
virBuildPath and virBuildPathInternal() function
There is currently no way to determine the libvirt version of a remote
libvirtd we are connected to. This is a useful piece of data to enable
feature detection.
Sometimes getaddrinfo returns IPv4 addresses before IPv6 addresses.
IPv6 sockets default to attempting to bind to IPv4 addresses too.
So if the IPv4 address is activated first, then binding to IPv6
will unneccessarily fail.
* daemon/libvirtd.c: Bind to IPv6 and IPv4 addresses separately
All drivers have copy + pasted inadequate error reporting which wraps
util.c:virGetHostname. Move all error reporting to this function, and improve
what we report.
Changes from v1:
Drop the driver wrappers around virGetHostname. This means we still need
to keep the new conn argument to virGetHostname, but I think it's worth
it.
The virStateInitialize() call for starting up stateful drivers
may require that the event loop is running already. This it is
neccessary to start the event loop before this call. At the
same time, network clients must not be processed until afte
virStateInitialize has completed.
The qemudListenUnix() and remoteListenTCP() methods must
therefore not register file handle watches, merely open the
network sockets & listen() on them. This means clients can
connected and are queued, pending completion of initialization
The qemudRunLoop() method is moved into a background thread
that is started early to allow access to the event loop during
driver initialization. The main process thread leader pretty
much does nothing once the daemon is running, merely waits
for the event loop thread to quit
* daemon/libvirtd.c, daemon/libvirtd.h: Move event loop into
a background thread
* daemon/THREADING.txt: Rewrite docs to better reflect reality
* configure.in daemon/Makefile.am: the --with-init-script configure
option was broken, and always defaulted based on the existence of
/etc/redhat-release. This was a systematic typo based on
mixed use of init-script and init-scripts.
The daemonizing code lets the parent exit almost immediately. This
means that it may think it has successfully started even when
important failures occur like not being able to acquire the PID
file. It also means network sockets are not yet open.
To address this when daemonizing the parent passes an open pipe
file descriptor to the child. The child does its basic initialization
and then writes a status code to the pipe indicating either success,
or failure. This ensures that when daemonizing, the parent does not
exit until the pidfile is acquired & basic network sockets are open.
Initialization of the libvirt drivers is still done asynchronously
since this may take a very long time.
* daemon/libvirtd.c: Force parent to stay around until basic config
file, pidfile & network socket init is completed
* daemon/libvirtd.c: Introduce a daemonSetupSignals() method
and put all signal handling code there
* daemon/libvirtd.h: Add sigread/sigwrite to qemud_server type
The libvirt default error handling callback will print all errors
to stderr. The libvirtd default logging callback will do the same.
Set a no-op error handling callback in libvirtd to prevent this
duplication
* daemon/libvirtd.c: Register a no-op error handling function
virInitialize must be the first libvirt function called to ensure
threads, error handling & random number generator are all setup.
Move UNIX socket directory permissions change to place of use
* daemon/libvirtd.c: Change qemudNetworkInit() so that it doesn't try
to free its argument, leaving the caller todo cleanup as is normal
practice. Add missing policykit cleanup to qemudCleanup, and remove
server watch if set. Remove duplicated call to listen() on TCP sockets
Nearly all of the methods in src/util/util.h have error codes that
must be checked by the caller to correct detect & report failure.
Add ATTRIBUTE_RETURN_CHECK to ensure compile time validation of
this
* daemon/libvirtd.c: Add explicit check on return value of virAsprintf
* src/conf/domain_conf.c: Add missing check on virParseMacAddr return
value status & report error
* src/network/bridge_driver.c: Add missing OOM check on virAsprintf
and report error
* src/qemu/qemu_conf.c: Add missing check on virParseMacAddr return
value status & report error
* src/security/security_selinux.c: Remove call to virRandomInitialize
that's done in libvirt.c already
* src/storage/storage_backend_logical.c: Add check & log on virRun
return status
* src/util/util.c: Add missing checks on virAsprintf/Run status
* src/util/util.h: Annotate all methods with ATTRIBUTE_RETURN_CHECK
if they return an error status code
* src/vbox/vbox_tmpl.c: Add missing check on virParseMacAddr
* src/xen/xm_internal.c: Add missing checks on virAsprintf
* tests/qemuargv2xmltest.c: Remove bogus call to virRandomInitialize()
Without this, after few weeks without use, each defined domain grows a
tail of empty gzipped logs, instead of keeping just the last log of
interest.
* daemon/libvirtd.logrotate.in: only rotate when the log is over 100 KBytes
Since virMigratePrepareTunnel() is used for migration over the
native libvirt connection, there is never any need to pass the
target URI to this method.
* daemon/remote.c, src/driver.h, src/libvirt.c, src/libvirt_internal.h,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/remote/remote_protocol.c, src/remote/remote_protocol.h,
src/remote/remote_protocol.x: Remove 'uri_in' parameter from
virMigratePrepareTunnel() method
Otherwise logrotate barfs:
error: error accessing /var/log/libvirt/uml: No such file or directory
error: libvirtd:1 glob failed for /var/log/libvirt/uml/*.log
error: found error in /var/log/libvirt/qemu/*.log /var/log/libvirt/uml/*.log /var/log/libvirt/lxc/*.log , skipping
* qemud/Makefile.am: always create /var/log/libvirt/{lxc,uml} when
installing the logrotate conf; not ideal, but easier than making
the logrotate conf depend on which drivers are enabled
The code which updated the message length after writing the
payload wrote the updated length word in the wrong place since
the XDR object was given a buffer pointing to the start of the
header payload, rather than message start.
* daemon/remote.c: Fix updating of event message length so that
we actually send the payload, not just the header
Implementation of tunnelled migration, using a Unix Domain Socket
on the qemu backend. Note that this requires very new versions of
qemu (0.10.7 at least) in order to get the appropriate bugfixes.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Right now, the stream stuff assumes that a stream is always
going to be used for transmit. This is not the case, and in
fact doesn't work with the tunnelled migration stuff. Add
a flag to remoteClientStream() to allow it to do RX only.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The actual type of size_t is architecture dependent. Because the len
parameter is used as unsigned int in remoteSendStreamData(), change its
type to unsigned int.
* daemon/dispatch.[ch]: change size_t to unsigned int for
remoteSendStreamData()
