Commit Graph

2158 Commits

Author SHA1 Message Date
Cole Robinson
6a4d938dd3 Require a semicolon for VIR_ENUM_IMPL calls
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_IMPL calls.

Move the verify() statement to the end of the macro and drop
the semicolon, so the compiler will require callers to add a
semicolon.

While we are touching these call sites, standardize on putting
the closing parenth on its own line, as discussed here:
https://www.redhat.com/archives/libvir-list/2019-January/msg00750.html

Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-02-03 17:46:29 -05:00
Cole Robinson
7662194bf3 Require a semicolon to VIR_ENUM_DECL calls
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_DECL calls.

Drop the semicolon from the final statement of the macro, so
the compiler will require callers to add a semicolon.

Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-02-03 17:46:29 -05:00
John Ferlan
a3dbaa3647 virsh: Add source-protocol-ver for pool commands
Allow the addition of the <protocol ver='n'/> to the provided XML.

Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-01-29 19:16:13 -05:00
Michal Privoznik
5772885d28 lib: Use more of VIR_STEAL_PTR()
We have this very handy macro called VIR_STEAL_PTR() which steals
one pointer into the other and sets the other to NULL. The
following coccinelle patch was used to create this commit:

  @ rule1 @
  identifier a, b;
  @@

  - b = a;
    ...
  - a = NULL;
  + VIR_STEAL_PTR(b, a);

Some places were clean up afterwards to make syntax-check happy
(e.g. some curly braces were removed where the body become a one
liner).

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2019-01-28 14:46:58 +01:00
Michal Privoznik
2707d4f8bc tools: Document completer callback
Strictly speaking, this should go near vshCompleter typedef
declaration. However, I find it more useful near actual completer
implementations.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-01-25 15:44:36 +01:00
Thomas Huth
803a73980a tools/virt-xml-validate: Fix GPL information
The tools/virt-xml-validate.in file is licensed under the terms of
the GPL, but then says "You should have received a copy of the
GNU *Lesser* General Public License". Thus scratch the "Lesser" here.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-01-25 14:04:19 +01:00
Eric Blake
1862a55462 maint: Prefer AM_CPPFLAGS over INCLUDES
Our use of INCLUDES in Makefile.am hearkens back to when we had to
cater to automake 1.9.6 (thanks, RHEL 5) which lacked AM_CPPFLAGS.
Modern Automake flags a warning that INCLUDES is deprecated, and
now that we mandate RHEL 7 or better (see commit c1bc9c66), we no
longer have to cater to the old spelling.  This change will also
make it easier to do per-binary CPPFLAGS.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-01-07 16:46:55 -06:00
Eric Blake
7a879323a9 maint: Drop unused GETTEXT_CPPFLAGS variable
Commit c0a8ea45 removed the use of gettextize, and the setting of
GETTEXT_CPPFLAGS, but did not scrub the now-unused variable from
Makefile.am snippets.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-01-07 16:45:45 -06:00
Michal Privoznik
c99e954973 Remove even more Author(s): lines from source files
In 600462834f we've tried to remove Author(s): lines
from comments at the beginning of our source files. Well, in some
files while we removed the "Author" line we did not remove the
actual list of authors.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2019-01-03 13:24:18 +01:00
Michal Privoznik
1845991d9b tools: Provide a script to recover fubar'ed XATTRs setup
Our code is not bug free. The refcounting I introduced will
almost certainly not work in some use cases. Provide a script
that will remove all the XATTRs set by libvirt so that it can
start cleanly.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-19 15:32:45 +01:00
Luyao Huang
ae8484586c virsh: Fix vcpupin command output wrong vcpu pinning info
Commit 3072ded3 changed the waya to format the vcpu pinning info
and forget to get cpumap for each vcpu during the loop, that cause
vcpupin command will display vcpu 0 info for other vcpus.

Signed-off-by: Luyao Huang <lhuang@redhat.com>
2018-12-19 10:20:57 +01:00
Michal Privoznik
29682196d8 Drop UML driver
The driver is unmaintained, untested and severely broken for
quite some time now. Since nobody even reported any issue with it
let us drop it.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-17 17:52:46 +01:00
Jiri Denemark
3f4914e03c qemu: Add support for postcopy-requests migration statistics
QEMU can report how many times during post-copy migration the domain
running on the destination host tried to access a page which has not
been migrated yet.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-17 16:16:30 +01:00
Daniel P. Berrangé
568a417224 Enforce a standard header file guard symbol name
Require that all headers are guarded by a symbol named

  LIBVIRT_$FILENAME

where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.

Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-14 10:47:13 +00:00
Daniel P. Berrangé
4cfd709021 Fix many mistakes & inconsistencies in header file layout
This introduces a syntax-check script that validates header files use a
common layout:

  /*
   ...copyright header...
   */
  <one blank line>
  #ifndef SYMBOL
  # define SYMBOL
  ....content....
  #endif /* SYMBOL */

For any file ending priv.h, before the #ifndef, we will require a
guard to prevent bogus imports:

  #ifndef SYMBOL_ALLOW
  # error ....
  #endif /* SYMBOL_ALLOW */
  <one blank line>

The many mistakes this script identifies are then fixed.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-14 10:46:53 +00:00
Daniel P. Berrangé
600462834f Remove all Author(s): lines from source file headers
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.

In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.

With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to  find the
author of a particular bit of code.

This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.

The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.

Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-13 16:08:38 +00:00
Daniel P. Berrangé
34eca98522 tools: rename S_ORG to C_ORG in virt-pki-validate
Rename a variable to make it clear that it holds the client organization
rather than the server organization.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-11 14:58:43 +00:00
Daniel P. Berrangé
ecf8619430 tools: relax x509 Subject regexes to allow numbers and more
The virt-pki-validate tool is extracting components in the x509
certificate Subject field. Unfortunately the regex it is is using is far
too strict, and so truncating valid data. It needs to consider ',' as a
field separator, and if that's not there take all data until the EOL.

With the broken regex:

$ echo "  Subject: O=Test,CN=guestHyp1ver"  | sed 's+.*CN=\(.[a-zA-Z \._-]*\).*+\1+'
guestHyp

And with the fixed regex

$ echo "Subject: O=Test,CN=guestHyp1ver"  | sed 's+.*CN=\([^,]*\).*+\1+'
guestHyp1ver

Reported-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-11 14:58:02 +00:00
Yuri Chornoivan
e5c1fbca24 Fix minor typos in messages and docs
Signed-off-by: Yuri Chornoivan <yurchor@ukr.net>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2018-12-05 10:39:54 +01:00
Jiri Denemark
fcd1c865e1 virsh: Strip XML declaration when extracting CPU XMLs
Since commit v4.3.0-336-gc84726fbdd all
{hypervisor-,}cpu-{baseline,compare} commands use a generic
vshExtractCPUDefXMLs helper for extracting individual CPU definitions
from the provided input file. The helper wraps the input file in a
<container> element so that several independent elements can be easily
parsed from the file. This works fine except when the file starts with
XML declaration (<?xml version="1.0" ... ?>) because the XML declaration
cannot be put inside any element. In fact it has to be at the very
beginning of the XML document without any preceding white space
characters. We can just simply skip the XML declaration.

https://bugzilla.redhat.com/show_bug.cgi?id=1592737

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-11-29 11:46:42 +01:00
Simon Kobyda
071488983c vsh-table: Get rid of trailing spaces
Get rid of trailing spaces which can be found after last column in tables.

Signed-off-by: Simon Kobyda <skobyda@redhat.com>
2018-11-28 13:18:48 +01:00
Wang Huaqiang
a91ebc8990 qemu: Report cache occupancy (CMT) with domstats
Adding the interface in qemu to report CMT statistic information
through command 'virsh domstats --cpu-total'.

Below is a typical output:

         # virsh domstats 1 --cpu-total
         Domain: 'ubuntu16.04-base'
           ...
           cpu.cache.monitor.count=2
           cpu.cache.monitor.0.name=vcpus_1
           cpu.cache.monitor.0.vcpus=1
           cpu.cache.monitor.0.bank.count=2
           cpu.cache.monitor.0.bank.0.id=0
           cpu.cache.monitor.0.bank.0.bytes=4505600
           cpu.cache.monitor.0.bank.1.id=1
           cpu.cache.monitor.0.bank.1.bytes=5586944
           cpu.cache.monitor.1.name=vcpus_4-6
           cpu.cache.monitor.1.vcpus=4,5,6
           cpu.cache.monitor.1.bank.count=2
           cpu.cache.monitor.1.bank.0.id=0
           cpu.cache.monitor.1.bank.0.bytes=17571840
           cpu.cache.monitor.1.bank.1.id=1
           cpu.cache.monitor.1.bank.1.bytes=29106176

Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-11-26 19:33:01 -05:00
John Ferlan
11ceedcda0 tools: Add virsh iothreadset command
Add a command to allow for setting various dynamic IOThread polling
interval scope (poll-max-ns, poll-grow, and poll-shrink). Describe
the values in the virsh.pod in as generic terms as possible. The
more specific QEMU algorithm has been divulged in the previous patch.

Based heavily on code originally posted by Pavel Hrdina
<phrdina@redhat.com>, but altered to only provide one command
and to not managed a poll disabled state.

Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
2018-11-19 07:26:40 -05:00
John Ferlan
2c4df6c68b virsh: Add ability to display IOThread stats
Add an --iothread qualifier to domstats and an explanation in
the man page. Describe the values in as generic terms as possible
allowing each hypervisor to provide a specific algorithm to utilize
the values as it sees fit.

Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
2018-11-19 07:26:40 -05:00
Nikolay Shirokovskiy
66a85cb136 libvirt: add daemon itself as shutdown reason
This patch introduces a new shutdown reason "daemon" in order
to indicate that the daemon needed to force shutdown the domain
as the best course of action to take at the moment.

This action would occur during reconnection when processing
encounters an error once the monitor reconnection is successful.

Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2018-11-14 06:52:23 -05:00
Eric Blake
35966308b5 virsh: Fix regression with duplicated error messages
Commit 4f4c3b13 (v3.3) fixed an issue where performing cleanup of
libvirt objects could sometimes lose error messages, by adding code
to copy the libvirt error into last_error prior to cleanup paths.
However, it caused a regression: on other paths, some errors are now
printed twice, if libvirt still remembers in its thread-local
storage that an error was set even after virsh cleared last_error.
For example:

$ virsh -c test:///default snapshot-delete test blah
error: Domain snapshot not found: no domain snapshot with matching name 'blah'
error: Domain snapshot not found: no domain snapshot with matching name 'blah'

Fix things by telling libvirt to discard any thread-local errors at
the same time virsh prints an error message (whether or not the libvirt
error is the same as what is stored in last_error).

Update the virsh-undefine testsuite (partially reverting portions of
commit b620bdee, by removing -q, to more easily pinpoint which commands
are causing which messages), now that there is only one error message
instead of two.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2018-10-12 09:30:56 -05:00
Michal Privoznik
8524faf8c4 virt-host-validate: Fix build on non-Linux
For non-Linux platforms we have
virHostValidateCGroupControllers() stub which only reports an
error. But we are not marking the ignored arguments the way we
should.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2018-10-08 09:55:40 +02:00
Pavel Hrdina
0a7101c89b virt-host-validate: require freezer for LXC
Cgroup freezer support for LXC was added in libvirt-0.7.2.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2018-10-05 15:53:29 +02:00
Pavel Hrdina
0f4d7daa8c virt-host-validate: rewrite cgroup detection to use util/vircgroup
This removes code duplication and simplifies cgroup detection.
As a drawback we will not have separate messages to enable cgroup
controller in kernel or to mount it.  On the other side the rewrite
adds support for cgroup v2.

The kernel config support was wrong because it was parsing
'/proc/self/cgroup' instead of '/proc/cgroups/' file.

The mount suggestion is removed as well because it will not work
with cgroup v2.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2018-10-05 15:53:29 +02:00
Jiri Denemark
b7ccd0757d virsh: Require explicit --domain for domxml-to-native
The domxml-to-native virsh command accepts either --xml or --domain
option followed by a file or domain name respectively. The --domain
option is documented as required, which means an argument with no option
is treated as --xml. Commit v4.3.0-127-gd86531daf2 broke this by making
--domain optional and thus an argument with no option was treated as
--domain.

https://bugzilla.redhat.com/show_bug.cgi?id=1633077

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2018-09-26 17:22:38 +02:00
Michal Privoznik
4374900040 tools: Fix printf format
We're passing size_t but using format for unsigned long.
Introduced in latest vshTable rework patches.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-09-24 13:39:58 +02:00
Simon Kobyda
bfdd20c5a9 virt-admin: Implement vshTable API to server-list and client-list
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
2018-09-24 09:09:14 +02:00
Simon Kobyda
95b29fc222 virsh: Implement vshTable API to vol-list
Local lengthy unicode-unreliable table formatting was replaced by new
API. Great example of how new API saves space and time.
Removed a lot of string lenght calculation used by the local table.

Signed-off-by: Simon Kobyda <skobyda@redhat.com>
2018-09-24 09:09:14 +02:00
Simon Kobyda
79eec7992b virsh: Implement vshTable API to pool-list
Local lengthy unicode-unreliable table formatting was replaced by new
API. Great example of how new API saves space and time.
Removed a lot of string lenght canculation used by the local table.

Signed-off-by: Simon Kobyda <skobyda@redhat.com>
2018-09-24 09:09:14 +02:00
Simon Kobyda
3072ded354 virsh: Implement vshTable API to vcpupin, iothreadinfo, domfsinfo
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
2018-09-24 09:09:14 +02:00
Simon Kobyda
063509a193 virsh: Implement vshTable API to domiflist
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
2018-09-24 09:09:14 +02:00
Simon Kobyda
075dd1185d virsh: Implement vshTable API to domblklist
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
2018-09-24 09:09:14 +02:00
Simon Kobyda
2979bbfb0f virsh: Implement vshTable API to domblkinfo
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
2018-09-24 09:09:14 +02:00
Simon Kobyda
b9057c639f virsh: Set up cmdDomblkinfo() and cmdDomblkinfoPrint() for vshTable API implementation
I've moved all the printing from cmdDomblkinfoPrint() to cmdDomblkinfo(),
and renamed the cmdDomblkinfoPrint() to cmdDomblkinfoGet(), since nature of
that function changed from gathering and printing informations only to
gathering information. This I believe simplifies the functions and
makes the implementation of vshTable API simpler.

Signed-off-by: Simon Kobyda <skobyda@redhat.com>
2018-09-24 09:09:14 +02:00
Simon Kobyda
b0b1ed2f7b virsh: Implement vshTable API to snapshot-list.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
2018-09-24 09:09:14 +02:00
Simon Kobyda
c2b9cf6733 virsh: Implement vshTable API to nwfilter-list and nwfilterbinding-list
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
2018-09-24 09:09:14 +02:00
Simon Kobyda
cf12efe088 virsh: Implement vshTable API to secret-list
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
2018-09-24 09:09:14 +02:00
Simon Kobyda
71029ef588 virsh: Implement vshTable API to net-list and net-dhcp-leases
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
2018-09-24 09:09:14 +02:00
Simon Kobyda
0396cf5336 virsh: Implement vsh-table to iface-list
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
2018-09-24 09:09:14 +02:00
Michal Privoznik
c846767bfa virsh: Display vhostuser socket path in domiflist
https://bugzilla.redhat.com/show_bug.cgi?id=1630164

The domiflist command is designed to show a brief information on
domain interfaces. One piece of information that is shows is
"Source" - source network, device, name, bridge. However, it's
ignoring vhostuser for which we can show the unix socket it's
associated with.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-09-21 15:01:29 +02:00
Erik Skultety
5165ff0971 src: More cleanup of some system headers already contained in internal.h
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2018-09-20 10:16:39 +02:00
Erik Skultety
9403b63102 internal: Move <stdio.h> include to internal.h
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2018-09-20 10:16:38 +02:00
Michal Privoznik
8e8a9dc3fa virsh: Honour user locale in cmdList
In 2e97450425 we've mistakenly removed gettext macro for
translating static strings. This results in table header being
printed in English regardless of user locale.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-09-19 10:44:08 +02:00
Shi Lei
eaa765ef6b tools: remove blank first line in function body
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
2018-09-17 13:29:01 +02:00
Eric Blake
ec788ac2fe virsh: Drop dead variables
The helper function virshSnapshotCreate (formerly vshSnapshotCreate)
has had dead variables since commit a00c37f2 (Sep 2011).

Signed-off-by: Eric Blake <eblake@redhat.com>
2018-08-31 17:18:28 -05:00