Although highly unlikely, nobody says that virEventAddHandle()
can't return 0 as a handle to socket callback. It can't happen
with our default implementation since all watches will have value
1 or greater, but users can register their own callback functions
(which can re-use unused watch IDs for instance). If this is the
case, weird things may happen.
Also, there's a little bug I'm fixing too, upon
virNetSocketRemoveIOCallback(), the variable holding callback ID
was not reset. Therefore calling AddIOCallback() once again would
fail. Not that we are doing it right now, but we might.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When going through the code I've notice that
virNetSocketAddIOCallback() increases the reference counter of
@socket. However, its counter part RemoveIOCallback does not. It took
me a while to realize this disproportion. The AddIOCallback registers
our own callback which eventually calls the desired callback and then
unref the @sock. Yeah, a bit complicated but it works. So, lets note
this hard learned fact in a comment in RemoveIOCallback().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When setting up the daemon networking, new services are created. These
services then have sockets to listen on. Once created, the service
objects are added to corresponding server object. However, during that
process, server increases reference counter of the service object. So,
at the end of the function, we should decrease it again. This way the
service objects will have only 1 reference, but that's okay since
servers are the only objects having a reference.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1224233
Currently it's not possible to determine the difference between a
fatal memory allocation or failure to open/read the directory error
with a perhaps less fatal, I didn't find the "block" device in the
directory (which may be a disk entry without a block device).
In the case of the latter, we shouldn't cause failure to continue
searching in the caller (virStorageBackendSCSIFindLUs), rather we
should allow trying reading the next directory entry.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add `virsh migrate' option `--migrate-disks' that allows CLI user to
explicitly specify block devices to migrate.
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1203032
Implement a `migrate_disks' parameters for the QEMU driver. This multi-
value parameter can be used to explicitly specify what block devices
are to be migrated using the NBD server. Tunnelled migration using NBD
is to be done.
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The `virTypedParamsAddStringList' function provides interface to add a
NULL-terminated array of string values as a multi-value to the params.
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add multikey API:
* virTypedParamsFilter that filters all the parameters with specified name.
* virTypedParamsGetStringList that returns a list with all the values for
specified name and string type.
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Allow multi-value parameters to be build using virTypedParamsAdd*
functions by removing check for duplicates.
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The `virTypedParamsValidate' function now can be instructed to allow
multiple entries for some of the keys. For this flag the type with
the `VIR_TYPED_PARAM_MULTIPLE' flag.
Add unit tests for this new behaviour.
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When playing with disk migration lately, I've noticed this warning in
domain logs:
WARNING: Image format was not specified for 'nbd://masina:49153/drive-virtio-disk0' and probing guessed raw.
Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
Specify the 'raw' format explicitly to remove the restrictions.
So I started digging into qemu source code to see what has triggered
the warning. I'd expect qemu to know formats of guest's disks since we
tell them on command line. This lead me to qmp_drive_mirror() where
the following can be found:
if (!has_format) {
format = mode == NEW_IMAGE_MODE_EXISTING ? NULL : bs->drv->format_name;
}
So, format is automatically initialized from the disk iff mode !=
"existing". Unfortunately, in migration we are tied to use this mode
(NBD doesn't support creating new images). Therefore the only way to
avoid this warning is to pass format. The discussion on the mail-list [1]
resulted in the code that always forces NBD export as "raw" format.
[1] https://www.redhat.com/archives/libvir-list/2015-June/msg00153.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
This function is returning a string (domain XML). Since d3ce7363
when it was first introduced, it was indented incorrectly:
static char
*qemuMigrationBeginPhase(..)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If virDomainObjGetDefs used in qemuDomainPinIOThread would fail the code
would jump to the 'cleanup' label after acquiring the job, thus the VM
would be locked forever.
Introduced in commit cac6d639.
The privileged flag will not change while the configuration might
change. Make the 'privileged' flag member of the driver again and mark
it immutable. Should that ever change add an accessor that will group
reads of the state.
virDomainObjGetOneDef will help to retrieve the correct definition
pointer from @vm in cases where VIR_DOMAIN_AFFECT_LIVE and
VIR_DOMAIN_AFFECT_CONFIG are mutually exclusive. The function simply
returns the correct pointer. This similarly to virDomainObjGetDefs will
greatly simplify the code.
If @flags contains only VIR_DOMAIN_AFFECT_CONFIG and @vm is active, the
function would return the active config rather than the persistent one
that it should return. This happened due to the fact that
virDomainObjGetDefs was checking the updated flags which may not contain
VIR_DOMAIN_AFFECT_LIVE if it is not requested even if @vm is active.
Additionally the function would not take the flags into account when
setting the pointers which was later used to determine whether the code
needs to update the given configuration.
The mistake was caught by the virt-test suite.
When hotplugging a memory device, there wasn't a check to determine
if there is a conflict with the address space being used by the to
be added memory device and any existing device which is disallowed by qemu.
This patch adds a check to ensure the new device address doesn't
conflict with any existing device.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
If the admin service is disabled it would not be allocated, but the NULL
pointer still would be added to the admin server. Since
virNetServerAddService would dereference it, the daemon would crash.
Move the service registration into the block that allocates it.
VIR_APPEND_ELEMENT would clear @srv to NULL after it successfully
inserted it thus the reference count could not be increased afterwards.
Switch to VIR_APPEND_ELEMENT_COPY. This fixes crash after terminating
the daemon.
There was many errors in libvirt.log caused by prlsdkDelNet function because
job variable was always initialized as PRL_INVALID_HANDLE
In this patch job variable gets return value of PrlSrv_DeleteVirtualNetwork function()
https://bugzilla.redhat.com/show_bug.cgi?id=1220527
This type of information defines attributes of a system
baseboard. With one exception: board type is yet not implemented
in qemu so it's not introduced here either.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some machine types are only reported as canonical names for other
machine types, which make it a bit harder to find what machine types are
supported by a specific QEMU binary. Ideally, one would just use
/capabilities/guest/arch[@name='...']/machine/text() XPath to get a list
of all supported machine types, but it doesn't work right now.
For example, we report
<machine canonical='pc-i440fx-2.3' maxCpus='255'>pc</machine>
in guest capabilities, but the corresponding
<machine maxCpus='255'>pc-i440fx-2.3</machine>
is missing.
This is a result of QMP probing. With "-machine ?" parsing QEMU sends
us two lines:
pc Standard PC (i440FX + PIIX, 1996) (alias of pc-i440fx-2.3)
pc-i440fx-2.3 Standard PC (i440FX + PIIX, 1996) (default)
while query-machines QMP command reports both in the same entry:
{"name": "pc-i440fx-2.3", "is-default": true, "cpu-max": 255, "alias": "pc"}
Let's make sure we always report separate <machine/> for both the
canonical name and its alias and using the canonical name as the default
machine type (i.e., inserting it before its alias) in case is-default is
true.
https://bugzilla.redhat.com/show_bug.cgi?id=1229666
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We tend to keep the folders in the EXTRA_DIST sorted alphabetically.
However, we've failed sometimes and the list is not ordered anymore.
Reorder it back.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So, it's a little paradox that we use the file twice. Firstly to build
libvirt-admin.la (a client side of the Admin API), then once again to
build the server side. Well, the problem is, this does not play nicely
with the distclean since the file is generated. So while it's removed
in the src/ the distclean running in daemon/ will not find the file
and fail. The file is needed because it contains the RPC wrappers. So
let's leave the client code as is and from the daemon/ just link the
client library. The linker will find desired symbols and use them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As with several other attributes of devices (link status, sriov VF
list, IOMMU group list), the detdev feature bits aren't automatically
updated in the nodedev driver's cache when they change. In order to
get a properly up-to-date list when getting the XML of a device, we
must reget them in update-caps prior to each dumpxml.
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1232880
While Martin introduced the binary (and its manpage) in commit
4e7ccf8713 it was pushed by mistake. Therefore it was reverted in
220393bfb0. The problem is, the original commit was not quite right
as the binary was added into the spec file in a different commit:
55e0c840af. So as long as the binary does not exist, we must remove it
from the spec file too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In a474611458 the virnetserver test was renamed to virnetdaemon.
Moreover, as the test relies on some data stored under
virnetserverdata/ the folder was renamed too. But this was not
reflected in the Makefile. Therefore when building outside of the
repository, the data folder was not distributed and test failed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The Admin API consists of a few files on daemon side. Notably
daemon/admin_server.{ch}. While they are both on the repo, only
the .c file is mentioned in Makefile. Therefore, .h is not
distributed and 'make rpm' fails.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves all src/parallels/parallels* files to vz/vz*
and fixes build accordingly.
No functional changes.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Here we stop referencing vz driver by different names
in error messages. 'parallels driver', 'Parallels Cloud
Server', 'Parallels driver' all become just 'vz driver'.
No functional changes. Only renaming and a bit of rewording.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
This patch changes all parallels/vz driver structure and
function prefixes from parallels to vz.
No functional changes.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
In latest patches we added Admin API. However, the Makefile in daemon
was missing one dependency: admin_server.c is including generated file
admin_dispatch.h. However, this dependency was not explicitly marked
in the Makefile therefore the build happened to fail on some
occasions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>