The whole point of pstore device is that the guest writes crash
dumps into it. But the way SELinux label is set on the
corresponding file warrants RO access only. This is due to a
copy-paste from code around: kernel/initrd/DTB/SLIC - these are
RO indeed, but pstore MUST be writable too. In a sense it's
closer to NVRAM/disks - hence set imagelabel on it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
So far we are relying on QEMU or sysadmin to create the file for
pstore. This is suboptimal as in the case of the former we can
not set proper seclabels (there's nothing to set seclabels on
until QEMU is started).
Therefore, make sure the file is created before launching QEMU
and that it has the correct size.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced only a couple of commits ago (in
v10.5.0-84-g90e50e67c6) the pstore device acts as a nonvolatile
storage, where guest kernel can store information about crashes.
This device, however, expects a file in the host from which the
crash data is read. So far, we expected users to provide a path,
but we can autogenerate one if missing. Just put it next to
per-domain's NVRAM stores.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
As can be seen in earlier commits, there can be two OEM strings
with the same index. But since our parser
(virSysinfoParseOEMStrings()) doesn't expect that, it increments
index in each run and thus skips over these strings.
Fortunately, we have the right index at hand - we're just
skipping over it in a loop. Just reconstruct the index back
inside the loop.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
On some systems, there are two or even more 'OEM Strings'
sections in DMI table. Here's an example of dmidecode output on
such system:
# dmidecode -q -t 11
OEM Strings
String 1: Default string
OEM Strings
String 1: ThunderX2 System
String 2: cavium.com
String 3: Comanche
Now, this poses a problem, because when one tries to obtain
individual strings, they get:
# dmidecode -q --oem-string 1
Default string
ThunderX2 System
# dmidecode -q --oem-string 2
No OEM string number 2
cavium.com
NB, the "No OEM string number 2" is printed onto stderr and
everything else onto stdout. Oh, and trying to get OEM strings
from just one section doesn't fly:
# dmidecode -q -H 0x1d --oem-string 2
Options --string, --type, --handle and --dump-bin are mutually exclusive
This means two things:
1) we have no way of distinguishing OEM strings at the same index
but in different sections,
2) because of how virSysinfoDMIDecodeOEMString() is written, we
fail in querying OEM string that exists in one section but not
in the others (for instance string #2 from example above).
While there's not much we can do about 1), there is something
that can be done about 2) - refine the error condition and make
the function return an error iff there's nothing on stdout and
there's something on stderr.
Resolves: https://issues.redhat.com/browse/RHEL-45952
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
If dry run of a command was requested (virCommandSetDryRun())
then a specified callback is called instead of running actual
command. This is meant to be used in tests. To mimic running the
command as closely as possible the callback can also set exit
status of the command it's implementing. To save some lines
though, the exit status is initialized to 0 so that callback has
to set it only on failures. Now, 0 is not exactly portable value
- that's why stdlib.h has EXIT_SUCCESS (and EXIT_FAILURE) values.
Initialize the exit status (held in dryRunStatus) to EXIT_SUCCESS
then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The acpi-erst backend for pstore device exposes a path in the
host accessible to the guest and as such we must set seclabels on
it to grant QEMU RW access.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Nothing special going on here.
Resolves: https://issues.redhat.com/browse/RHEL-24746
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The aim of pstore device is to provide a bit of NVRAM storage for
guest kernel to record oops/panic logs just before the it
crashes. Typical usage includes usage in combination with a
watchdog so that the logs can be inspected after the watchdog
rebooted the machine. While Linux kernel (and possibly Windows
too) support many backends, in QEMU there's just 'acpi-erst'
device so stick with that for now. The device must be attached to
a PCI bus and needs two additional values (well, corresponding
memory-backend-file needs them): size and path. Despite using
memory-backend-file this does NOT add any additional RAM to the
guest and thus I've decided to expose it as another device type
instead of memory model.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The new option style renamed one of the cache modes.
https://issues.redhat.com/browse/RHEL-50329
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In cases when a QEMU process takes longer than the time sigterm and
sigkill are issued to kill the process do not simply fail and leave the
VM in state VIR_DOMAIN_SHUTDOWN until the daemon stops. Instead set up
an fd on /proc/$pid and get notified when the QEMU process finally has
terminated to cleanup the VM state.
Resolves: https://issues.redhat.com/browse/RHEL-28819
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If there are absent values in an already existing element
specifying rom settings, we simply use the old ones. This
behaviour is not desired, as users might think that deleting the
element from XML would delete the setting (because the hotplug
succeeds) - which does not happen. Because of that, we should not
accept an interface without elements that cannot be changed.
Therefore, we should not allow absent values for already existing
rom setting during hotplug.
Resolves: https://issues.redhat.com/browse/RHEL-7109
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
New element 'openfiles' had confusing name. Since the patch with
this new element wasn't propagate yet, old name ('rlimit_nofile')
was changed.
...
<binary>
<openfiles max='122333'/>
</binary>
...
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since libvirt commit 3ef9b51b10,
the pflash storage for the os loader file follows its read-only flag,
and qemu tries to open the file for writing if set so.
This patches virt-aa-helper to generate the VM's AppArmor rules
that allow this, using the same domain definition flag and default.
Signed-off-by: Miroslav Los <mirlos@cisco.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
By definition. Accordingly, filter them out when looking for
a read/write image.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the configuration explicitly requests a specific type of
firmware image, be it pflash or ROM, we should ignore all images
that are not of that type.
If no specific type has been requested, of course, any type is
considered a match and the selection will be based upon the
other attributes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add an element to configure the rlimit nofile size:
...
<binary>
<rlimit_nofile size='122333'/>
</binary>
...
Non-positive values are forbidden in 'domaincommon.rng'. Added separate
test file, created by modifying the 'vhost-user-fs-fd-memory.xml'.
Signed-off-by: Adam Julis <ajulis@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
So much can happen in the fileName field of the VMX that the easiest
thing is to silently report a serial type="null".
This effectively reverts commits de81bdb8d4cd and 62c53db0421a, but
keeps the test files to show the fix is still in place.
There is one instance where an error gets reset, but since that is a
rare case on its own and on top of that does not happen in any of our
long-running daemons with a logfile that might get monitored it should
be fine to leave it there.
Resolves: https://issues.redhat.com/browse/RHEL-32182
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This CPU feature can be used to explicitly enable or disable
support for pointer authentication. By default, it will be
enabled if the host supports it.
https://issues.redhat.com/browse/RHEL-7044
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Recent commit v10.4.0-87-gd9935a5c4f made a reasonable change to only
reset beingDestroyed back to false when vm->def->id is reset to make
sure other code can detect a domain is (about to become) inactive. It
even added a comment saying any caller of qemuProcessBeginStopJob is
supposed to call qemuProcessStop to clear beingDestroyed. But not every
caller really does so because they first call qemuProcessBeginStopJob
and then check whether a domain is still running. If not the
qemuProcessStop call is skipped leaving beingDestroyed=true. In case of
a persistent domain this may block incoming migrations of such domain as
the migration code would think the domain died unexpectedly (even though
it's still running).
The qemuProcessBeginStopJob function is a wrapper around
virDomainObjBeginJob, but virDomainObjEndJob was used directly for
cleanup. This patch introduces a new qemuProcessEndStopJob wrapper
around virDomainObjEndJob to properly undo everything
qemuProcessBeginStopJob did.
https://issues.redhat.com/browse/RHEL-43309
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Allow migration if the "migrate-precopy" capability is present or
libvirt is not the one running the virtiofs daemon.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Run the daemon with --print-capabilities first, to see what it supports.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As of now, libvirt supports few essential stats as
part of virDomainGetJobStats for Live Migration such
as memory transferred, dirty rate, number of iteration
etc. Currently it does not have support for the vfio
stats returned via QEMU. This patch adds support for that.
Signed-off-by: Kshitij Jha <kshitij.jha@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The "modify" command allows to replace an existing record (its
text value). The primary key is the name of the record. If
duplicity or missing record detected, throw error.
Tests in networkxml2xmlupdatetest.c contain replacements of an
existing DNS-text record and failure due to non-existing record.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/639
Signed-off-by: Adam Julis <ajulis@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The "modify" command allows to replace an existing Srv record
(some of its elements respectively: port, priority and weight).
The primary key used to choose the modify record is the remaining
parameters, only one of them is required. Not using some of these
parameters may cause duplicate records and error message. This
logic is there because of the previous implementation (Add and
Delete options) in the function.
Tests in networkxml2xmlupdatetest.c contain replacements of an
existing DNS-Srv record and failure due to non-existing record.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/639
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The "modify" command allows you to replace an existing record
(its hostname, sub-elements). IP address acts as the primary key.
If it is not found, the attempt ends with an error message. If
the XML contains a duplicate address, it will select the last
one.
Tests in networkxml2xmlupdatetest.c contain replacements of an
existing DNS-Host record and failure due to non-existing record.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/639
Signed-off-by: Adam Julis <ajulis@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The outdated comment refers to a non-existent member in the
virDomainObj structure.
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When generating paths for a domain specific AppArmor profile each
path undergoes a validation where it's matched against an array
of well known prefixes (among other things). Now, for
OVMF/AAVMF/... images we have a list and some entries have
comments to which type of image the entry belongs to. For
instance:
"/usr/share/OVMF/", /* for OVMF images */
"/usr/share/AAVMF/", /* for AAVMF images */
But these comments are pretty useless. The path itself already
gives away the image type. Drop them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
This commit removes the redundant call to qemuSecurityGetNested() in
qemuStateInitialize(). In qemuSecurityGetModel(), the first security manager
in the stack is already used by default, so this change helps to
simplify the code.
Signed-off-by: hongmianquan <hongmianquan@bytedance.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Fix libvirtd hang since fork() was called while another thread had
security manager locked.
We have the stack security driver, which internally manages other security drivers,
just call them "top" and "nested".
We call virSecurityStackPreFork() to lock the top one, and it also locks
and then unlocks the nested drivers prior to fork. Then in qemuSecurityPostFork(),
it unlocks the top one, but not the nested ones. Thus, if one of the nested
drivers ("dac" or "selinux") is still locked, it will cause a deadlock. If we always
surround nested locks with top lock, it is always secure. Because we have got top lock
before fork child libvirtd.
However, it is not always the case in the current code, We discovered this case:
the nested list obtained through the qemuSecurityGetNested() will be locked directly
for subsequent use, such as in virQEMUDriverCreateCapabilities(), where the nested list
is locked using qemuSecurityGetDOI, but the top one is not locked beforehand.
The problem stack is as follows:
libvirtd thread1 libvirtd thread2 child libvirtd
| | |
| | |
virsh capabilities qemuProcessLanuch |
| | |
| lock top |
| | |
lock nested | |
| | |
| fork------------------->|(nested lock held by thread1)
| | |
| | |
unlock nested unlock top unlock top
|
|
qemuSecuritySetSocketLabel
|
|
lock nested (deadlock)
In this commit, we ensure that the top lock is acquired before the nested lock,
so during fork, it's not possible for another task to acquire the nested lock.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1303031
Signed-off-by: hongmianquan <hongmianquan@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In a domain created with an interface with a <driver> subelement,
the device contains a non-NULL virDomainVirtioOptions struct, even
for non-virtio NIC models. The subelement need not be present again
after libvirt restarts, or when the interface is passed to clients.
When clients such as virsh domif-setlink put back the modified
interface XML, the new device's virtio attribute is NULL. This may
fail the equality checks for virtio options in qemuDomainChangeNet,
depending on whether libvird was restarted since define or not.
This patch modifies the check for non-virtio models, to ignore olddev
value of virtio (assumed valid), and to allow either NULL or a struct
with all values ABSENT in the new virtio options.
Signed-off-by: Miroslav Los <mirlos@cisco.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Similarly to commit 2482801608 we can safely ignore connectionId,
portId and portgroupId in both XML and VMX as they are only a blind
pass-through between XML and VMX and an ethernet without such parameters
was spotted in the wild. On top of that even our documentation says the
whole VMWare Distrubuted Switch configuration is a best-effort.
Resolves: https://issues.redhat.com/browse/RHEL-46099
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This wires up the emulator 'debug' parameter to control the
/usr/bin/swtpm 'level' parameter for logging.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Pick up some more of the qemu_driver.c code so this function supports
both CONFIG and LIVE updates.
Note that qemuDomainUpdateDeviceFlags() passed vm->def to
virDomainDeviceDefParse() for the VIR_DOMAIN_AFFECT_CONFIG case, which
is technically incorrect; in the test driver code we'll fix this.
Signed-off-by: John Levon <john.levon@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
mem_nodes[i].ndistances is written outside the loop causing an out-of-bounds
write leading to heap corruption.
While we are at it, the entire cleanup portion can be removed as it can be
handled in virDomainNumaFree. One instance of VIR_FREE is also removed and
replaced with g_autofree.
This patch also adds a testcase which would be picked up by ASAN, if this
portion regresses.
Fixes: 742494eed8
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
