Our socket address format is in a rather non-standard format and that is
because sasl library requires the IP address and service to be delimited by a
semicolon. The string form is a completely internal matter, however once the
admin interfaces to retrieve client identity information are merged, we should
return the socket address string in a common format, e.g. format defined by
URI rfc-3986, i.e. the IP address and service are delimited by a colon and
in case of an IPv6 address, square brackets are added:
Examples:
127.0.0.1:1234
[::1]:1234
This patch changes our default format to the one described above, while adding
separate methods to request the non-standard SASL format using semicolon as a
delimiter.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1271183
We only wait 0.5 seconds for the session daemon to start up and present
its socket, which isn't sufficient for many users. Bump up the sleep
interval and retry amount so we wait for a total of 5.0 seconds.
On every socket connect(2) attempt we were re-launching session
libvirtd, up to 100 times in 5 seconds.
This understandably caused some weird load races and intermittent
qemu:///session startup failures
https://bugzilla.redhat.com/show_bug.cgi?id=1271183
When we autolaunch libvirtd for session URIs, we spin in a retry
loop waiting for the daemon to start and the connect(2) to succeed.
However if we exceed the retry count, we don't explicitly raise an
error, which can yield a slew of different error messages elsewhere
in the code.
Explicitly raise the last connect(2) failure if we run out of retries.
- Add some debugging
- Make the loop dependent only on retries
- Make it explicit that connect(2) success exits the loop
- Invert the error checking logic
OpenBSD uses 'struct sockpeercred' instead of 'struct ucred'. Add a
configure check that detects its presence and use if in the code that
could be compiled on OpenBSD.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
VIR_DEBUG and VIR_WARN will automatically add a new line to the message,
having "\n" at the end or at the beginning of the message results in
empty lines.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When running the test suite using "unshare -n" we might have IPv6 but no
configured addresses. Due to AI_ADDRCONFIG getaddrinfo then fails with
EAI_NONAME which we should then treat as IPv6 unavailable.
The auto-spawn code would originally attempt to spawn the
daemon for both ENOENT and ECONNREFUSED errors from connect().
The various refactorings eventually lost this so we only
spawn the daemon on ENOENT. The result is if the daemon exits
uncleanly, so that the socket is left in the filesystem, we
will never be able to auto-spawn the daemon again.
Although highly unlikely, nobody says that virEventAddHandle()
can't return 0 as a handle to socket callback. It can't happen
with our default implementation since all watches will have value
1 or greater, but users can register their own callback functions
(which can re-use unused watch IDs for instance). If this is the
case, weird things may happen.
Also, there's a little bug I'm fixing too, upon
virNetSocketRemoveIOCallback(), the variable holding callback ID
was not reset. Therefore calling AddIOCallback() once again would
fail. Not that we are doing it right now, but we might.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When going through the code I've notice that
virNetSocketAddIOCallback() increases the reference counter of
@socket. However, its counter part RemoveIOCallback does not. It took
me a while to realize this disproportion. The AddIOCallback registers
our own callback which eventually calls the desired callback and then
unref the @sock. Yeah, a bit complicated but it works. So, lets note
this hard learned fact in a comment in RemoveIOCallback().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The socket test suite has a function for checking if IPv4
or IPv6 are available, and returning a free socket. The
first bit of that will be needed in another test, so pull
that logic out into a separate helper method.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
By default, getaddrinfo() will return addresses for both
IPv4 and IPv6 if both protocols are enabled, and so the
RPC code will listen/connect to both protocols too. There
may be cases where it is desirable to restrict this to
just one of the two protocols, so add an 'int family'
parameter to all the TCP related APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There is a possibility that we jump onto error label with @lockpath
still initialized to NULL. Here, the @lockpath should be unlink()-ed,
but passing there a NULL is not a good idea. Don't do that. In fact,
we should call unlink() only if we created the lock file successfully.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1200149
Even though we have a mutex mechanism so that two clients don't spawn
two daemons, it's not strong enough. It can happen that while one
client is spawning the daemon, the other one fails to connect.
Basically two possible errors can happen:
error: Failed to connect socket to '/home/mprivozn/.cache/libvirt/libvirt-sock': Connection refused
or:
error: Failed to connect socket to '/home/mprivozn/.cache/libvirt/libvirt-sock': No such file or directory
The problem in both cases is, the daemon is only starting up, while we
are trying to connect (and fail). We should postpone the connecting
phase until the daemon is started (by the other thread that is
spawning it). In order to do that, create a file lock 'libvirt-lock'
in the directory where session daemon would create its socket. So even
when called from multiple processes, spawning a daemon will serialize
on the file lock. So only the first to come will spawn the daemon.
Tested-by: Richard W. M. Jones <rjones@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
getsockopt(sock->fd, SOL_SOCKET, SO_PEERCRED, ...) sets the pid to 0
when the process that opens the connection is in another container.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Since 1b807f92, connecting with virsh to an already running session
libvirtd fails with:
$ virsh list --all
error: failed to connect to the hypervisor
error: no valid connection
error: Failed to connect socket to
'/run/user/1000/libvirt/libvirt-sock': Transport endpoint is already
connected
This is caused by a logic error in virNetSocketNewConnectUnix: even if
the connection to the daemon socket succeeded, we still try to spawn the
daemon and then connect to it.
This commit changes the logic to not try to spawn libvirtd if we
successfully connected to its socket.
Most of this commit is whitespace changes, use of -w is recommended to
look at it.
Since '1b807f92d' - Coverity complains that in the error paths of
both virFork() and virProcessWait() that the 'passfd' will not be closed.
Added the VIR_FORCE_CLOSE(passfd) and initialized it to -1.
Also noted that variable 'buf' was never really used - so I removed it
Replace:
if (virBufferError(&buf)) {
virBufferFreeAndReset(&buf);
virReportOOMError();
...
}
with:
if (virBufferCheckError(&buf) < 0)
...
This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)
SO_REUSEADDR on Windows is actually akin to SO_REUSEPORT
on Linux/BSD. ie it allows 2 apps to listen to the same
port at once. Thus we must not set it on Win32 platforms
See http://msdn.microsoft.com/en-us/library/windows/desktop/ms740621.aspx
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The dtrace probe macros rely on the logging API. We can't make
the internal.h header include the virlog.h header though since
that'd be a circular include. Instead simply split the dtrace
probes into their own header file, since there's no compelling
reason for them to be in the main internal.h header.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
aa0f099 introduced a strict error checking for getsockopt and it
revealed that getting a peer credential of a socket on FreeBSD
didn't work. Libvirtd hits the error:
error : virNetSocketGetUNIXIdentity:1198 : Failed to get valid
client socket identity groups
SOL_SOCKET (0xffff) was used as a level of getsockopt for
LOCAL_PEERCRED, however, it was wrong. 0 is correct as well as
Mac OS X.
So for LOCAL_PEERCRED our options are SOL_LOCAL (if defined) or
0 on Mac OS X and FreeBSD. According to the fact, the patch
simplifies the code by removing ifdef __APPLE__.
I tested the patch on FreeBSD 8.4, 9.2 and 10.0-BETA1.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
While LOCAL_PEERCRED on the BSDs does not return the pid information of
the peer, Mac OS X 10.8 added LOCAL_PEERPID to retrieve the pid so we
should use that when its available to get that information.
When running setuid, we must be careful about what env vars
we allow commands to inherit from us. Replace the
virCommandAddEnvPass function with two new ones which do
filtering
virCommandAddEnvPassAllowSUID
virCommandAddEnvPassBlockSUID
And make virCommandAddEnvPassCommon use the appropriate
ones
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch improves the error checking in the LOCAL_PEERCRED version
of virNetSocketGetUNIXIdentity, used by FreeBSD and Mac OSX.
1. The error return paths now correctly unlock the socket. This is
implemented in exactly the same way as the SO_PEERCRED version,
using "goto cleanup"
2. cr.cr_ngroups is initialised to -1, and cr.cr_ngroups is checked
for negative and overlarge values.
This means that if the getsockopt() call returns success but doesn't
actually update the xucred structure, this is now caught. This
happened previously when getsockopt was called with SOL_SOCKET
instead of SOL_LOCAL, prior to commit 5a468b3, and resulted in
random uids being accepted.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since 5a468b38b6 we use SOL_LOCAL for the 2nd argument of getsockopt()
however Lion added the define SOL_LOCAL set to 0, which is the value to
the 2nd argument of getsockopt() for Unix sockets on Mac OS X. So
instead of using the define just pass 0 so we restore compatibility
with Snow Leopard and Leopard.
Reported at https://github.com/mxcl/homebrew/pull/23141
This fixes the following error:
error : virGetUserEnt:703 : Failed to find user record for uid '32654'
'32654' (it's random and varies) comes from getsockopt with
LOCAL_PEERCRED option. getsockopt returns w/o error but seems
to not set any value to the buffer for uid.
For Mac OS X, LOCAL_PEERCRED has to be used with SOL_LOCAL level.
With SOL_LOCAL, getsockopt returns a correct uid.
Note that SOL_LOCAL can be found in
/System/Library/Frameworks/Kernel.framework/Versions/A/Headers/sys/un.h.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While BSDs don't support process creation timestamp information via
PEERCRED for Unix sockets, we need to actually initialize the value
because it is used by the libvirt code.
To allow creation of a virNetSocketPtr instance from a pre-opened
socketpair FD, add a virNetSocketNewConnectSockFD method.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch enables the password authentication in the libssh2 connection
driver. There are a few benefits to this step:
1) Hosts with challenge response authentication will now be supported
with the libssh2 connection driver.
2) Credential for hosts can now be stored in the authentication
credential config file
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since PIDs can be reused, polkit prefers to be given
a (PID,start time) pair. If given a PID on its own,
it will attempt to lookup the start time in /proc/pid/stat,
though this is subject to races.
It is safer if the client app resolves the PID start
time itself, because as long as the app has the client
socket open, the client PID won't be reused.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are various methods named "virXXXXSecurityContext",
which are specific to SELinux. Rename them all to
"virXXXXSELinuxContext". They will still raise errors at
runtime if SELinux is not compiled in
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The F_DUPFD_CLOEXEC operation with fcntl() expects a single
int argument, specifying the minimum FD number for the newly
dup'd file descriptor. We were not specifying that causing
random stack data to be accessed as the FD number. Sometimes
that worked, sometimes it didn't.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
but libvirt is built with --with-selinux. In this case getpeercon
returns ENOPROTOOPT so don't return an error in that case but simply
don't set seccon.
The virNetSocket & virIdentity classes accidentally got some
conditionals using HAVE_SELINUX instead of WITH_SELINUX.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
