sdk domain handle is unique per connection so there is
no sense to query it again if we have it in vzDomObjPtr.
Side effect of prlsdkSdkDomainLookupByUUID is refreshing
domain config is of no use too as PrlVm_BeginEdit do it too.
vz supports only a subset of tcp and udp parameters.
1. tcp type supports only 'raw' protocol.
2. udp type supports only same parameters of 'host' and 'service'
for 'bind' and 'connect'.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
After domain is in the domains list let's keep it there. This
is approach taken by qemu driver and vz vzDomainMigrateFinish3Params too.
It quite reasonable, driver domain object is fully constructed and
can be discovered by client later.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
9c14a9ab introduced vzNewDomain function to enlist libvirt domain
object before actually creating vz sdk domain. Fix should fix
race on same vz sdk domain added event where libvirt domain object is
enlisted too. But later eb5e9c1e added locked checks for
adding livirtd domain object to list on vz sdk domain added event.
Thus now approach of 9c14a9ab is unnecessary complicated.
See we have otherwise unuseful prlsdkGetDomainIds function only
to create minimal domain definition to create libvirt domain object.
Also vzNewDomain is difficult to use as it creates partially
constructed domain object.
Let's move back to original approach where prlsdkLoadDomain do
all the necessary job. Another benefit is that we can now
take driver lock for bare minimum and in single place. Reducing
locking time have small disadvatage of double parsing on race
conditions which is typical if domain is added thru vz driver.
Well we have this double parse inevitably with current vz sdk api
on any domain updates so i would not take it here seriously.
Performance events subscribtion is done before locked check and
therefore could be done twice on races but this is not the problem.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Vz containers are able to use ploop volumes from storage pools
to work upon.
To use filesystem type volume, pool name and volume name should be
specifaed in <source> :
<filesystem type='volume' accessmode='passthrough'>
<driver type='ploop' format='ploop'/>
<source pool='guest_images' volume='TEST_POOL_CT'/>
<target dir='/'/>
</filesystem>
The information about pool and volume is stored in ct dom configuration:
<StorageURL>libvirt://localhost/pool_name/vol_name</StorageURL>
and can be easily obtained via PrlVmDevHd_GetStorageURL sdk call.
The only shorcoming: if storage pool is moved somewhere the ct
should be redefined in order to refresh the information aboot path
to root.hdd
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
We do not need to check domainf fs type there,
because it is done in prlsdkCheckUnsupportedParams.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Adding domain to domain list on preparation step is not correct.
First domain is not fully constructed - domain definition is
missing. Second we can't use VIR_MIGRATE_PARAM_DEST_XML parameter
to parse definition as vz sdk can patch it by itself. Let's add/remove
domain on finish step. This is for synchronization purpose only so domain
is present/absent on destination after migration completion. Actually
domain object will probably be created right after actual vz sdk
migration start by vz sdk domain defined event.
We can not and should not sync domain cache on error path in finish step
of migration. We can not as we really don't know what is the reason of
cancelling and we should not as user should not make assumptions on
state on error path. What we should do is cleaning up temporary migration
state that is induced on prepare step but we don't have one. Thus
cancellation should be noop.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
libvirt domain defined event is issued only on correspondent vz sdk
event. But in case event delivered before domain is added to
domain list we can mistakenly skip this event if prlsdkNewDomainByHandle
return NULL in case of domain is discovered in the list under
the driver lock. Let's return domain object in this case.
Now prlsdkNewDomainByHandle returns NULL only in case of
error which is more convinient.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The first version of migration cookie was rather dumb resulting
in passing empty or unused fields here and there. Add flags to
specify what to bake to and eat from cookie so we deal only
with meaningful data. However for backwards compatibility
we still need to pass at least some faked fields sometimes.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Allow to store driver specific data on a per-vcpu basis.
Move of the virDomainDef*Vcpus* functions was necessary as
virDomainXMLOptionPtr was declared below this block and I didn't want to
split the function headers.
We need this because apply graphics functions is used on
update too. Also in case of NULL address resolve it to default
instead of error.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Move graphic device config to post parse. This way we
detect error on early stage and leverage checking on detach too.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
First we need to always set value to vz sdk parameter so
we can leverage setting code for device updates. This patch
resolves tristate default to off implicitly. This is easier
then extract default value from vz sdk itself. First current
default is off too, second this approach is already taken
for 'net->linkstate'.
Second dump this option in domain xml.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Current code that pass gateways to vz sdk is not suitable for
updates. If update has no gateways while we had them before
we need to pass "" for vz sdk gateways to reset old value.
The code definitely deserves its own function.
Drop checks that skip setting gateways if network address
is not set. Such a configuration is possible in vz sdk.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
This is as easy as moving disks checks from domain post
parse callback to device post parse callback.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Attach/detach functions for disk/net are quite trivial and
typically call a few functions in begin/end edit frame. Having
in mind update function too adding configuring for another
device (like graphics) will introduce 3 trivial functions more.
Let's replace current approach by attach/detach functions for
device.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Current implementation works with hard disks only. This patch
adds support for any disk device (cdroms and hdds right now).
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
This code was added as a part of huge patch that moves driver
from working with prlctl to vz sdk so there is no good explanation
why this is done this way. The problem that it is not correct.
vz sdk cache mode parameter affects all domain disks while this hunk
resets its on every disk to a new value.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
As it turned out PrlVmDev_GetStackIndex can return negative values
without reporting an error, which is incorrect but nevertheless.
After that we feed this negative index to virIndexToDiskName,
which in turn returns NULL and we set it to virDomainDiskDef.dst.
Using virDiskNameToBusDeviceIndex with a virDomainDiskDef structure
which has NULL dst field crashes.
Fix this by returning an error in prlsdkGetDiskId in such cases.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
The approach of subscribing on first stat API call and then waiting
for receiving of performance event from sdk to process the call originates
in times when every vz libvirt connections spawns its own sdk connection.
Thus without this waiting virsh stat call would return empty stats. Now
with single sdk connection this scheme is unnecessary complicated.
This patch subscribes to performance events on first domain appearence
and unsubscribe on its removing.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
In preparation for moving all the CPU related APIs out of
the nodeinfo file, give them a virHostCPU name prefix.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In preparation for moving all the memory related APIs out of
the nodeinfo file, give them a virHostMem name prefix.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Nearly all the methods in the nodeinfo file are given a
'const char *sysfs_prefix' parameter to override the
default sysfs path (/sys/devices/system). Every single
caller passes in NULL for this, except one use in the
unit tests. Furthermore this parameter is totally
Linux-specific, when the APIs are intended to be cross
platform portable.
This removes the sysfs_prefix parameter and instead gives
a new method linuxNodeInfoSetSysFSSystemPath for use by
the test suite.
For two of the methods this hardcodes use of the constant
SYSFS_SYSTEM_PATH, since the test suite does not need to
override the path for thos methods.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
VNC graphics already supports sockets but only via 'socket' attribute.
This patch coverts that attribute into listen type 'socket'.
For backward compatibility we need to handle listen type 'socket' and 'socket'
attribute properly to support old XMLs and new XMLs. If both are provided they
have to match, if only one of them is provided we need to be able to parse that
configuration too.
To not break migration back to old libvirt if the socket is provided by user we
need to generate migratable XML without the listen element and use only 'socket'
attribute.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The virConnectOpenInternal method opens the libvirt client
config file and uses it to resolve things like URI aliases.
There may be driver specific things that are useful to
store in the config file too, so rather than have them
re-parse the same file, pass the virConfPtr down to the
drivers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Similarly to the domain definition validator add a device validator. The
change to the prototype of the domain validator is necessary as
virDomainDeviceInfoIterateInternal requires a non-const pointer.
If try to stop VM or container which is already stopped than
Virtuozzo 7 returns code PRL_ERR_INVALID_ACTION_REQUESTED.
Error code PRL_ERR_DISP_VM_IS_NOT_STARTED is used in Virtuozzo 6
vz puts uuids into curly braces. Simply introduce new contstant to reflect this
and get rid of magic +2 in code.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Peer to peer migration is implemented just as in managed case. Basically
it is copy paste from managed case but with all the branches that are not
applied to vz removed.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The newest version of migration protocol - version 3 with parameters is implemented.
Supported flags is VIR_MIGRATE_PAUSED only. Supported parameters are
VIR_MIGRATE_PARAM_URI and VIR_MIGRATE_PARAM_DEST_NAME. VIR_MIGRATE_PARAM_DEST_XML
is in VZ_MIGRATION_PARAMETERS for technical onyl reasons.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
This session uuid acts as authN token for different multihost vz operations one
of which is migration. Unfortunately we can't get it from server at any time
thus we need to save it at login.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
This solution does not keep snapshots cache because vz sdk lacks good support
for snapshot related events.
Libvirt and vz sdk has different approach to snapshot ids. vz sdk always
auto generate them while libvirt has ability to specify id by user.
Thus I have no other choice rather than simply ignore ids set by user
or generated by libvirt.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
SDK handles empty cdroms all right. We just need to
pass "" instead of NULL (not setting is good too).
However we can get problems here. Disk detaching treats source
as ids. Fortunately disk detaching is not supported for cdroms
yet and for hard disks we can not get empty source - this is prohibitited
by xml parsing code.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Current version of the function does not check format of cdroms at all.
At the same time prlsdkGetDiskInfo give hints that cdroms always
have format VIR_STORAGE_FILE_RAW. So fix vzCheckUnsupportedDisks.
About structure of checks. As we don't have means to store format
in SDK we always have only one format in every situation. So instead
of setting boolean let's get allowed format instead and finally compare
it to the requested. This structure of checks seems stable to me
because we have only one format in every situation.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
VIR_STORAGE_FILE_AUTO can not be set from xml description.
At the same time we don't set disks format to this value
as for example qemu does. Thus this we can never get this
value in format.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
If we want to delete all disks for container or vm
we should make a loop from 0 to NumberOfDisks and always
use zero index in PrlVmCfg_GetHardDisk to get disk handle.
When we delete first disk after that numbers of other disks
will be changed, start from 0 to NumberOfDisks-1.
That's why we should always use zero index.
We don't have input devices in SDK thus for define/dumpxml
operations to be consistent we need to:
1. on dumpxml: infer input devices from other parts of config.
It is already done in prlsdkLoadDomain.
2. on define: check that input devices are the same that
will be infer back on dumpxml operation.
The second part should be fixed.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
libvirt handles empty source as NULL, while vz sdk as
"" thus we need a bit of conversion.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Current implementation does not detect all incompatible configurations.
For example if we have in vzsdk bootorder "cdrom1, cdrom0" (that is
"hdb, hda" in case of ide cdroms) and cdroms do not have disk
images inserted. In this case boot order check code fails to
distiguish them at all as for both PrlVmDev_GetFriendlyName gives "".
Well the consequences are only missing warnings but as
we just have introduced all the necessary tools to face the problem -
let's fix it.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Actually using disk PrlVmDev_GetFriendlyName as id on
detaching volumes is not a problem. We can only detach
hard disks and these can not have empty friendly names.
But upcoming update device functionality for cdroms
can not use disk source as id at all as update operation
typically change this same source value. Thus we will need
to use cdrom bus and cdrom target name as cdrom id. So in attempt
to use same id scheme for all purpuses lets fix hard disk
detach function to use new id.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Our intention is to use disk bus and disk target name pair
as disk id instead of name returned by PrlVmDev_GetFriendlyName.
We already have the code that extracts this pair from vzsdk
data. Let's factor it out into a function.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Since vz driver is now lives as a part of daemon we can benefit from
this fact and allow vz clients to use shared drivers API like storage,
network, nwfilter etc.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
SDK does not allocate memory when getting strings thus we
need to call every function that returns string twice.
First to obtain string length, second to obtain string
itself. It is tedious so let's create helper functions
for cases when we know length of the result beforehand
and we are not.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
remove unnecessary vzConnectClose prototype and make
local structure vzDomainDefParserConfig be static
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
We don't need them anymore as all pointers within vzDriver structure
are not changed during the time it exists.
Where we still need to synchronize we use virObjectLock/Unlock as far
as vzDriver is lockable object.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Lock driver when a new domain is created in prlsdkNewDomainByHandle
and try to find it in the list under lock again because it can race
with vzDomainDefineXMLFlags when a domain with the same uuid is added
via vz dispatcher directly and libvirt define.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
This patch introduces a new 'vzDriver' lockable object and provides
helper functions to allocate/destroy it and we pass it to prlsdkXxx
functions instead of virConnectPtr.
Now we store domain related objects such as domain list, capabitilies
etc. within a single vz_driver vzDriver structure, which is shared by
all driver connections. It is allocated during daemon initialization or
in a lazy manner when a new connection to 'vz' driver is established.
When a connection to vz daemon drops, vzDestroyConnection is called,
which in turn relays disconnect event to all connection to 'vz' driver.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
GCC in RHEL-6 complains about listen:
../../src/conf/domain_conf.c:23718: error: declaration of 'listen' shadows a global declaration [-Wshadow]
/usr/include/sys/socket.h:204: error: shadowed declaration is here [-Wshadow]
This renames all the listen to gListen.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
No need to remember connection name and have corresponding
domain type to keep backward compatibility with former
'parallels' driver. It is enough to be able to accept 'parallels'
uri and domain types.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
we don't need to allocate macstr at all as it is an array
and already has the the space it needs.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Quite straigthforward as vz sdk memory setting function makes
just what we want to that is set "amount of physical memory
allocated to a domain".
'useflags' is introduced for non flag function implementation.
We can't just use combination of flags like "live | config" or
we fail for inactive domains. Other combinations have drawbacks
too.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Actually this is not pure refactoring. Part of common code is
replaced with virDomainObjUpdateModificationImpact and this
a good replacement. It includes removed check of inactive
domain and active flags set. Additionally we resolve
current flag in accordance with current state of domain.
Thus it becames possible to attach/detach devices for
inactive domains if this flag is set.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
As usual we try to deal correctly with vz domains that were
created by other means and thus can have all range of SDK domain
parameters. If vz domain boot order can't be represented
in libvirt os boot section let's give warning and make os boot section
represent SDK to some extent.
1. Os boot section supports up to 4 boot devices. Here we just
cut SDK boot order up to this limit. Not too bad.
2. If there is a floppy in boot order let's just skip it.
Anyway we don't show it in the xml. Not too bad too.
3. SDK boot order with unsupported disks order. Say we have "hdb, hda" in
SDK. We can not present this thru os boot order. Well let's just
give warning but leave double <boot dev='hd'/> in xml. It's
kind of misleading but we warn you!
SDK boot order have an extra parameters 'inUse' and 'sequenceIndex'
which makes our task more complicated. In realitly however 'inUse'
is always on and 'sequenceIndex' is not less than 'boot position index'
which simplifies out task back again! To be on a safe side let's explicitly
check for this conditions!
We have another exercise here. We want to check for unrepresentable
condition 3 (see above). The tricky part is that in contrast to
domains defined thru this driver 3-rd party defined domains can
have device ordering different from default. Thus we need
some id to check that N-th boot disk of os boot section is same as
N-th boot disk of SDK boot. This is what prlsdkBootOrderCheck
for. It uses disks sources paths as id for disks and iface names
for network devices.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
We want to report boot order in dumpxml for vz domains.
Thus we want disks devices to be sorted in output compatible with boot
ordering specification. So let's just use virDomainDiskInsert
which makes appropriate sorting.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The patch makes some refactoring of the existing code. Current boot order spec code
makes very simple thing in somewhat obscure way. In case of VMs
it sets the first hdd as the only bootable device. In case of CTs it
doesn't touch the boot order at all if one of the filesystems is mounted to root.
Otherwise like in case of VMs it sets the first hdd as the only bootable
device and additionally sets this device mount point to root. Refactored
code makes all this explicit.
The actual boot order support is simple. Common libvirt domain xml parsing
code makes the exact ordering of disks devices as described in docs
for boot ordering (disks are sorted by bus order first, device target
second. Bus order is the order of disk buses appearence in original
xml. Device targets order is alphabetical). We add devices in the
same order and SDK designates device indexes sequentially for each
device type. Thus device index is equal to its boot index. For
example N-th cdrom in boot specification refers to sdk cdrom with
it's device index N.
If there is no boot spec in xml the parsing code will add <boot dev='hdd'>
for HVMs automatically and we backward compatibly set fist hdd as
bootable.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
It's just a combination of AddImplicitControllers, and AddConsoleCompat.
Every caller that wants ImplicitControllers also wants the ConsoleCompat
AFAICT, so lump them together. We also need it for future patches.
We include the file in plenty of places. This is mostly due to
historical reasons. The only place that needs something from the
header file is storage_backend_fs which opens _PATH_MOUNTED. But
it gets the file included indirectly via mntent.h. At no other
place in our code we need _PATH_.*. Drop the include and
configure check then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Each version of virtuozzo supports only one type of SCSI controller
So if we add disk on SCSI bus, we should set SCSI controller model.
We can take it from vzCapabilities structure.
Because Vz6 supports SCSI(BUSLOGIC), IDE and SATA controllers only and
Vz7 supports SCSI(VIRTIO_SCSI) and IDE only we add list of supported
controllers and scsi models to vzCapabilities structure.
When a new connection opens, we select proper capabilities values according
to Virtuozzo version and check them in XMLPostParse.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
We should report correct disk format depending on vz version and domain type.
Since we support only one disk format for each domain type, we can take it
from vzCapabilities structure.
As long as we have another function checking disk parameters correctness,
let's have them in one place. Here we change prefix of the moved function and
start to call it from vzCheckUnsupportedDisks rather than add disk.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
As far as Virtuozzo6 and Virtuozzo7 support different disk types for virtual
machines (ploop and qcow2 respectively) and different buses (vz6: IDE, SCSI,
SATA; vz7: IDE SCSI) we add vzCapabilities structure to help undestand which
disk formats and buses are supported in the context of a current connection.
When a new connection opens, we select proper capabilities in accordance to
current Virtuozzo version.
Since commit 9c14a9ab we have broken active domain listing
because reworked prlsdkLoadDomain doesn't set dom->def->id
propely. It just looses it when a new def structure is set.
Now we make prlsdkConvertDomainState function return void
and move calling it after an old dom->def is replaces with
a new one within prlsdkLoadDomain function.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Introduce a helper to check supported device and domain config and move
the memory hotplug checks to it.
The advantage of this approach is that by default all new features are
considered unsupported by all hypervisors unless specifically changed
rather than the previous approach where every hypervisor would need to
declare that a given feature is unsupported.
Race condition:
User calls defineXML to create new instance.
The main thread from vzDomainDefineXMLFlags() creates new instance by prlsdkCreateVm.
Then this thread calls prlsdkAddDomain to add new domain to domains list.
The second thread receives notification from hypervisor that new VM was created.
It calls prlsdkHandleVmAddedEvent() and also tries to add new domain to domains list.
These two threads call virDomainObjListFindByUUID() from prlsdkAddDomain() and don't find new domain.
So they add two domains with the same uuid to domains list.
This fix splits logic of prlsdkAddDomain() into two functions.
1. vzNewDomain() creates new empty domain in domains list with the specific uuid.
2. prlsdkLoadDomain() add data from VM to domain object.
New algorithm for creating an instance:
In vzDomainDefineXMLFlags() we add new domain to domain list by calling vzNewDomain()
and only after that we call CreateVm() to create VM.
It means that we "reserve" domain object with the specific uuid.
After creation of new VM we add info from this VM
to reserved domain object by calling prlsdkLoadDomain().
Before this patch prlsdkLoadDomain() worked in 2 different cases:
1. It creates and initializes new domain. Then updates it from sdk handle.
2. It updates existed domain from sdk handle.
In this patch we remove code which creates new domain from LoadDomain()
and move it to vzNewDomain().
Now prlsdkLoadDomain() only updates domain from skd handle.
In notification handler prlsdkHandleVmAddedEvent() we check
the existence of a domain and if it doesn't exist we add new domain by calling
vzNewDomain() and load info from sdk handle via prlsdkLoadDomain().
Bug cause:
Update the domain that is subscribed to hypervisor notification.
LoadDomain() rewrites notifications fields in vzDomObj structure and makes domain as "unsubscribed".
Fix:
Initialize notification fields in vzDomObj only if we create a new domain.
And do not reinitialize these fields if we update domain (by calling LoadDomain with olddom argument)
prlsdkGetDomainIds() returns name and uuid for specified instance.
Now output arguments can be NULL.
It allows to get only necessary info(name or uuid).
And use the newly added caps->host.netprefix (if it exists) for
interface names that match the autogenerated target names.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
In case of prlsdkLoadDomains fails, vzOpenDefault should
clear connection privateData pointer every time its
memory is actually freed.
Also it is not necessary to call vzConnectClose if a call
to vzOpenDefault fails, because they both make cleanup of
connection privateData.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
prlsdkCleanupBridgedNet call should be made strongly after
any actual domain deletion accurs. By doing this we avoid
any potential problems connected with second undefine call
when it is made after first one fails by some reason, and
we detect that network is already deleted.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Currently vz driver unregisters domains when undefine is called,
which is wrong because it contradicts with expected behavior.
All vz domains are persistent, which means that when one is
defined a new bundle directory containing meta data is created.
Undefining domains in a way we do now leaves those directories
undeleted, which prevents subsequent define call for the same
domain xml. I.e. the following sequence define->undefine->define
doesn't work now.
The patch fixes the problem by calling PrlVm_Delete instead of
PrlVm_Unreg detaching all disks prior actually doing this to
prevent images deletion.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Our domain_conf.* files are big enough. Not only they contain XML
parsing code, but they served as a storage of all functions whose
name is virDomain prefixed. This is just wrong as it gathers not
related functions (and modules) into one big file which is then
harder to maintain. Split virDomainObjList module into a separate
file called virdomainobjlist.[ch].
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Just straight-forward patch.
Use reference counting for privdom as stats internally could drop domain lock.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
We have macros for both positive and negative string matching.
Therefore there is no need to use !STREQ or !STRNEQ. At the same
time as we are dropping this, new syntax-check rule is
introduced to make sure we won't introduce it again.
Signed-off-by: Ishmanpreet Kaur Khera <khera.ishman@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The following functions are implemented:
vzDomainIsUpdated, vzDomainGetVcpusFlags and vzDomainGetMaxVcpus.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
The following functions were implemented:
vzNodeGetCPUStats, vzNodeGetMemoryStats,
vzNodeGetCellsFreeMemory and vzNodeGetFreeMemory.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Because we have no limitation for maximal number of vcpus in containers
we report as maximum 1028 just for the sake of common sence.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
In fact, it was never used as far as vz has no features supporting it.
That is why there will be no harm to anyone if we just remove this code to
prevent further misunderstanding and efforts to support dead code.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
At the time this code was added we had intentions to support libvirt interface
to manage vz networks. In fact, it was never implemented completely to work
correctly that makes me think that there will be no harm to anyone if we just
rip it off. Moreover, in vz7 we started to use libvirt bridge network driver to
manage networks.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
As far as not every call of prlsdkUUIDParse assume correct UUID
supplied, there is no use to complain about wrong format in it.
Otherwise our log is flooded with false error messages.
For instance, calling prlsdkUUIDParse from prlsdkEventsHandler
works as a filter and in case of uuid absence for event issuer,
we simply know that we shouldn't continue further processing.
Instead of error logging for all calls we should explicitly take
into accaunt where it is called from.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add the sysfs_prefix argument to the call to allow for setting the
path for tests to something other than SYSFS_CPU_PATH which is a
derivative of SYSFS_SYSTEM_PATH
Use cpupath for nodeCapsInitNUMAFake and remove SYSFS_CPU_PATH
We create a virtual network of special type, which
has the same name as bridge name to create bridged
network adapter in vz. So when we delete such an
adapter we have to remove corresponding virtual
network.
So let's rename prlsdkDelNet to prlsdkCleanupBridgedNet
and don't check for return value.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
It is better not to assume that newly created network should be
connected to a bridge with same name, but specify it explicitly
by PRL_USE_VNET_NAME_FOR_BRIDGE_NAME flag.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
We support only one IPv4 and one IPv6 default gateway.
If static IPs are not present in instance config,
then we switch on DHCP for this adapter.
PrlVmDevNet_SetAutoApply to makes necessary settings within guest OS
In linux case it creates network startup scripts
/etc/sysconfig/network-scripts/ifcfg-ethN and fills it with necessary
parameters.
There should be at least one domain for each guest
in cababilities. And in current code we don't add
domain for this guest for example.
if ((guest = virCapabilitiesAddGuest(caps, VIR_DOMAIN_OSTYPE_HVM,
VIR_ARCH_X86_64,
"vz",
NULL, 0, NULL)) == NULL)
Anyway, with two virt types it looks a litte messy, so let's
move adding guest and domain to a separate function.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Current version of SDK event dispatcing is incorrect. For most VM events (add,
delete etc) issuer type is PIE_DISPATCHER. Actually analyzing issuer type
doesn't have any benifints so this patch get rid of it. All dispatching is done
only on event type.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Function prlsdkGetStatsParam was missing a prototype or the static
keyword. I went with static since it built successfully.
Pushed as a build breaker fix.
Implemented counters:
VIR_DOMAIN_MEMORY_STAT_SWAP_IN
VIR_DOMAIN_MEMORY_STAT_SWAP_OUT
VIR_DOMAIN_MEMORY_STAT_MINOR_FAULT
VIR_DOMAIN_MEMORY_STAT_MAJOR_FAULT
VIR_DOMAIN_MEMORY_STAT_AVAILABLE
VIR_DOMAIN_MEMORY_STAT_ACTUAL_BALLOON
VIR_DOMAIN_MEMORY_STAT_UNUSED
Comments.
1. Use vzDomObjFromDomainRef/virDomainObjEndAPI pair to get domain
object as we use prlsdkGetStatsParam. See previous statistics
comments.
2. Balloon statistics is not applicable to containers. Fault
statistics for containers not provided in PCS6 yet.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Comments.
Replace vzDomObjFromDomain/virObjectUnlock pair
to vzDomObjFromDomainRef/virDomainObjEndAPI as we
use prlsdkGetStatsParam. See previous statistics
comments.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Make net device lookup by mac return sdk handle
instead of quite ephemeral enumeration index. After
this change there is no need anymore in special
function of removing device by enumeration index.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Populate counters SDK currenly supports:
rx_bytes
rx_packets
tx_bytes
tx_packets
Comments.
Use vzDomObjFromDomainRef/virDomainObjEndAPI pair to get domain
object as we use prlsdkGetStatsParam that can release domain
object lock and thus we need a reference in case domain
is deleated meanwhile.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
In the e6d180f07f commit the parallels driver was renamed to vz.
However, there was a commit merged later, which was sent to the list
before the rename. The other commit is 6de12b026b. Fix all the
missing renames.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In this patch we add VIR_DOMAIN_DEVICE_NET handlers implementation
for domainAttachDevice and domainDetachDevice callbacks.
As soon as we don't support this operation for hypervisor type domains,
we implement this functionality for containers only.
In detach procedure we find network device by MAC address.
Because PrlVmDevNet_GetMacAddress() returns MAC as a UTF-8 encoded
null-terminated string, we use memcmp() to compare it.
Also we remove corresponding virtual network by prlsdkDelNetAdapter call.
There was many errors in libvirt.log caused by prlsdkDelNet function because
job variable was always initialized as PRL_INVALID_HANDLE
In this patch job variable gets return value of PrlSrv_DeleteVirtualNetwork function()
This patch moves all src/parallels/parallels* files to vz/vz*
and fixes build accordingly.
No functional changes.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
