pciDeviceGetVirtualFunctionInfo returns pf netdevice name and virtual
function index for a given vf. This is just a wrapper around existing functions
to return vf's pf and vf_index with one api call
pciConfigAddressToSysfsfile returns the sysfile pci device link
from a 'struct pci_config_address'
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
qemuDomainAttachNetDevice
- re-ordered some things at start of function because
networkAllocateActualDevice should always be run and a slot
in def->nets always allocated, but host_net_add isn't needed
if the actual type is hostdev.
- if actual type is hostdev, defer to
qemuDomainAttachHostDevice (which will reach up to the NetDef
for things like MAC address when necessary). After return
from qemuDomainAttachHostDevice, slip directly to cleanup,
since the rest of the function is specific to emulated net
devices.
- put assignment of new NetDef into expanded def->nets down
below cleanup: (but only on success) since it is also needed
for emulated and hostdev net devices.
qemuDomainDetachHostDevice
- after locating the exact device to detach, check if it's a
network device and, if so, use toplevel
qemuDomainDetachNetDevice instead so that the def->nets list
is properly updated, and 'actual device' properly returned to
network pool if appropriate. Otherwise, for normal hostdevs,
call the lower level qemuDomainDetachThisDevice.
qemuDomainDetachNetDevice
- This is where it gets a bit tricky. After locating the device
on the def->nets list, if the network device type == hostdev,
call the *lower level* qemuDomainDetachThisDevice (which will
reach back up to the parent net device for MAC address /
virtualport when appropriate, then clear the device out of
def->hostdevs) before skipping past all the emulated
net-device-specific code to cleanup:, where the network
device is removed from def->nets, and the network device
object is freed.
In short, any time a hostdev-type network device is detached, we must
go through the toplevel virDomaineDetachNetDevice function first and
last, to make sure 1) the def->nnets list is properly managed, and 2)
any device allocated with networkAllocateActualDevice is properly
freed. At the same time, in the middle we need to go through the
lower-level vidDomainDetach*This*HostDevice to be sure that 1) the
def->hostdevs list is properly managed, 2) the PCI device is properly
detached from the guest and reattached to the host (if appropriate),
and 3) any higher level teardown is called at the appropriate time, by
reaching back up to the NetDef config (part (3) will be covered in a
separate patch).
This patch makes sure that each network device ("interface") of
type='hostdev' appears on both the hostdevs list and the nets list of
the virDomainDef, and it modifies the qemu driver startup code so that
these devices will be presented to qemu on the commandline as hostdevs
rather than as network devices.
It does not add support for hotplug of these type of devices, or code
to honor the <mac address> or <virtualport> given in the config (both
of those will be done in separate patches).
Once each device is placed on both lists, much of what this patch does
is modify places in the code that traverse all the device lists so
that these hybrid devices are only acted on once - either along with
the other hostdevs, or along with the other network interfaces. (In
many cases, only one of the lists is traversed / a specific operation
is performed on only one type of device. In those instances, the code
can remain unchanged.)
There is one special case - when building the commandline, interfaces
are allowed to proceed all the way through
networkAllocateActualDevice() before deciding to skip the rest of
netdev-specific processing - this is so that (once we have support for
networks with pools of hostdev devices) we can get the actual device
allocated, then rely on the loop processing all hostdevs to generate
the correct commandline.
(NB: <interface type='hostdev'> is only supported for PCI network
devices that are SR-IOV Virtual Functions (VF). Standard PCI[e] and
USB devices, and even the Physical Functions (PF) of SR-IOV devices
can only be assigned to a guest using the more basic <hostdev> device
entry. This limitation is mostly due to the fact that non-SR-IOV
ethernet devices tend to lose mac address configuration whenever the
card is reset, which happens when a card is assigned to a guest;
SR-IOV VFs fortunately don't suffer the same problem.)
This is the new interface type that sets up an SR-IOV PCI network
device to be assigned to the guest with PCI passthrough after
initializing some network device-specific things from the config
(e.g. MAC address, virtualport profile parameters). Here is an example
of the syntax:
<interface type='hostdev' managed='yes'>
<source>
<address type='pci' domain='0' bus='0' slot='4' function='3'/>
</source>
<mac address='00:11:22:33:44:55'/>
<address type='pci' domain='0' bus='0' slot='7' function='0'/>
</interface>
This would assign the PCI card from bus 0 slot 4 function 3 on the
host, to bus 0 slot 7 function 0 on the guest, but would first set the
MAC address of the card to 00:11:22:33:44:55.
NB: The parser and formatter don't care if the PCI card being
specified is a standard single function network adapter, or a virtual
function (VF) of an SR-IOV capable network adapter, but the upcoming
code that implements the back end of this config will work *only* with
SR-IOV VFs. This is because modifying the mac address of a standard
network adapter prior to assigning it to a guest is pointless - part
of the device reset that occurs during that process will reset the MAC
address to the value programmed into the card's firmware.
Although it's not supported by any of libvirt's hypervisor drivers,
usb network hostdevs are also supported in the parser and formatter
for completeness and consistency. <source> syntax is identical to that
for plain <hostdev> devices, except that the <address> element should
have "type='usb'" added if bus/device are specified:
<interface type='hostdev'>
<source>
<address type='usb' bus='0' device='4'/>
</source>
<mac address='00:11:22:33:44:55'/>
</interface>
If the vendor/product form of usb specification is used, type='usb'
is implied:
<interface type='hostdev'>
<source>
<vendor id='0x0012'/>
<product id='0x24dd'/>
</source>
<mac address='00:11:22:33:44:55'/>
</interface>
Again, the upcoming patch to fill in the backend of this functionality
will log an error and fail with "Unsupported Config" if you actually
try to assign a USB network adapter to a guest using <interface
type='hostdev'> - just use a standard <hostdev> entry in that case
(and also for single-port PCI adapters).
This refactoring is necessary to support hotplug detach of
type=hostdev network devices, but needs to be in a separate patch to
make potential debugging of regressions more practical.
Rather than the lowest level functions searching for a matching
device, the search is now done in the toplevel function, and an
intermediate-level function (qemuDomainDetachThisHostDevice()), which
expects that the device's entry is already found, is called (this
intermediate function will be called by qemuDomainDetachNetDevice() in
order to support detach of type=hostdev net devices)
This patch should result in 0 differences in functionality.
Three new functions useful in other files:
virDomainHostdevInsert:
Add a new hostdev at the end of the array. This would more sensibly be
called virDomainHostdevAppend, but the existing functions for other
types of devices are called Insert.
virDomainHostdevRemove:
Eliminates one entry from the hostdevs array, but doesn't free it;
patterned after the code at the end of the two
qemuDomainDetachHostXXXDevice functions (and also other pre-existing
virDomainXXXRemove functions for other device types).
virDomainHostdevFind:
This function is patterned from the search loops at the top of
qemuDomainDetachHostPciDevice and qemuDomainDetachHostUsbDevice, and
will be used to re-factor those (and other detach-related) functions.
To shorten some new code that accesses the many fields within the
subsys struct of a hostdev, create a separate toplevel, typedefed
virDomainHostdevSubsys struct so that we can define temporary pointers
to the subsys part.
The parent can be any type of device. It defaults to type=none, and a
NULL pointer. The intent is that if a hostdevdef is contained in the
def for a higher level device (e.g. virDomainNetDef), hostdev->parent
will point to the higher level device, and type will be set to that
type of device. This way, during attach and detach of the device,
parent can be checked, and appropriate callouts made to do higher
level device initialization (e.g. setting MAC address).
Also, although these hostdevs with parents will be added to a domain's
hostdevs list, they will be treated slightly differently when
traversing the list, e.g. virDomainHostdefDefFree for a hostdev that
has a parent doesn't need to be called (and will be a NOP); it will
simply be removed from the list (since the parent device object is in
its own type-specific list, and will be freed from there).
In an upcoming patch, virDomainNetDef will acquire a
virDomainHostdevDef, and the <interface> XML will take on some of the
elements of a <hostdev>. To avoid duplicating the code for parsing and
formatting the <source> element (which will be nearly identical in
these two cases), this patch factors those parts out of the
HostdevDef's parse and format functions, and puts them into separate
helper functions that are now called by the HostdevDef
parser/formatter, and will soon be called by the NetDef
parser/formatter.
One change in behavior - previously virDomainHostdevDefParseXML() had
diverged from current common coding practice by logging an error and
failing if it found any subelements of <hostdev> other than those it
understood (standard libvirt practice is to ignore/discard unknown
elements and attributes during parse). The new helper function ignores
unknown elements, and thus so does the new
virDomainHostdevDefParseXML.
In order to allow for a virDomainHostdevDef that uses the
virDomainDeviceInfo of a "higher level" device (such as a
virDomainNetDef), this patch changes the virDomainDeviceInfo in the
HostdevDef into a virDomainDeviceInfoPtr. Rather than adding checks
all over the code to check for a null info, we just guarantee that it
is always valid. The new function virDomainHostdevDefAlloc() allocates
a virDomainDeviceInfo and plugs it in, and virDomainHostdevDefFree()
makes sure it is freed.
There were 4 places allocating virDomainHostdevDefs, all of them
parsers of one sort or another, and those have all had their
VIR_ALLOC(hostdev) changed to virDomainHostdevDefAlloc(). Other than
that, and the new functions, all the rest of the changes are just
mechanical removals of "&" or changing "." to "->".
There will be cases where the iterator callback will need to know the
type of the device whose info is being operated on, and possibly even
need to use some of the device's config. This patch adds a
virDomainDeviceDefPtr to the args of every callback, and fills it in
appropriately as the devices are iterated through.
The virDomainDeviceInfoPtrs in qemuCollectPCIAddress and
qemuComparePCIDevice are named "dev" and "dev1", but those functions
will be changed (in order to match a change in the args sent to
virDomainDeviceInfoIterate() callback args) to contain a
virDomainDeviceDefPtr device.
This patch renames "dev" to "info" (and "dev[n]" to "info[n]") to
avoid later confusion.
This patch is only code movement + adding some forward definitions of
typedefs.
virDomainHostdevDef (not just a pointer to it, but an actual object)
will be needed in virDomainNetDef and virDomainActualNetDef, so it
must be relocated earlier in the file.
Likewise, virDomainDeviceDef will be needed in virDomainHostdevDef, so
it must be moved up even earlier. This, in turn, creates a forward
reference problem, but fortunately only with pointers to other device
types, so their typedefs can be moved up in the file, eliminating the
problem.
Not all device types were represented in virDomainDeviceType, so some
types of devices couldn't be represented in a virDomainDeviceDef
(which requires a different type of pointer in the union for each
different kind of device).
Since serial, parallel, channel, and console devices are all
virDomainChrDef, and the virDomainDeviceType is never used to produce
a string from the type (and only used in the other direction
internally to code, never to produce XML), I only added one "CHR"
type, which is associated with "virDomainChrDefPtr chr" in the union.
Commit 723d5c (added after the release of 0.9.10) adds a
NetlinkEventClient for each interface sent to
virNetDevMacVLanCreateWithVPortProfile. This should only be done if
the interface actually *has* a virtPortProfile, otherwise the event
handler would be a NOP. The bigger problem is that part of the setup
to create the NetlinkEventClient is to do a memcpy of virtPortProfile
- if it's NULL, this triggers a segv.
This patch just qualifies the code that adds the client - if
virtPortProfile is NULL, it's skipped.
Qemu supports sizing by bytes; we shouldn't force the user to
round up if they really wanted an unaligned total size.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_RESIZE_BYTES):
New flag.
* src/libvirt.c (virDomainBlockResize): Document it.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockResize): Take
size in bytes.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextBlockResize):
Likewise. Pass bytes, not megabytes, to monitor.
* src/qemu/qemu_driver.c (qemuDomainBlockResize): Implement new
flag.
No matter what cache mode is used, readonly disks are always safe wrt
migration. Shared disks are required to be readonly or to disable
host-side cache, which makes them safe as well.
With this patch, it's possible to shut down guests in parallel. Parallel
startup was possible before, but this functionality was not documented
properly.
To enable parallel startup set the START_DELAY to 0.
Parallel shutdown has a configurable parameter PARALLEL_SHUTDOWN that
defines the number of machines being shut down in parallel. Enabling
this feature changes the semantics of SHUTDOWN_TIMEOUT parameter that is
applied as a cumulative timeout to shutdown all guests on a URI.
A multi-threaded client with event loop may crash if one of its threads
closes a connection while event loop is in the middle of sending
keep-alive message (either request or response). The right place for it
is inside virNetClientIOEventLoop() between poll() and
virNetClientLock(). We should only close a connection directly if no-one
is using it and defer the closing to the last user otherwise. So far we
only did so if the close was initiated by keep-alive timeout.
Building virt-aa-helper with dtrace probes enabled, ldd complained about
undefined references:
./.libs/libvirt_util.a(libvirt_util_la-event_poll.o):(.note.stapsdt+0x24):
undefined reference to `libvirt_event_poll_purge_timeout_semaphore'
...
Lets say I got a volume with '1G' allocation and '10G' capacity. The
available space in the parent pool is '5G'. With the current check for
overcapacity, I can only try to resize to <= '6G'. You see the problem?
With an additional new bool added to determine whether or not to
discourage the use of the supplied MAC address by the bridge itself,
virNetDevTapCreateInBridgePort had three booleans (well, 2 bools and
an int used as a bool) in the arg list, which made it increasingly
difficult to follow what was going on. This patch combines those three
into a single flags arg, which not only shortens the arg list, but
makes it more self-documenting.
When a tap device for a domain is created and attached to a bridge,
the first byte of the tap device MAC address is set to 0xFE, while the
rest is set to match the MAC address that will be presented to the
guest as its network device MAC address. Setting this high value in
the tap's MAC address discourages the bridge from using the tap
device's MAC address as the bridge's own MAC address (Linux bridges
always take on the lowest numbered MAC address of all attached devices
as their own).
In one case within libvirt, a tap device is created and attached to
the bridge with the intent that its MAC address be taken on by the
bridge as its own (this is used to assure that the bridge has a fixed
MAC address to prevent network outages created by the bridge MAC
address "flapping" as guests are started and stopped). In this case,
the first byte of the mac address is *not* altered to 0xFE.
In the current code, callers to virNetDevTapCreateInBridgePort each
make the MAC address modification themselves before calling, which
leads to code duplication, and also prevents lower level functions
from knowing the real MAC address being used by the guest. The problem
here is that openvswitch bridges must be informed about this MAC
address, or they will be unable to pass traffic to/from the guest.
This patch centralizes the location of the MAC address "0xFE fixup"
into virNetDevTapCreateInBridgePort(), meaning 1) callers of this
function no longer need the extra strange bit of code, and 2)
bitNetDevTapCreateBridgeInPort itself now is called with the guest's
unaltered MAC address, and can pass it on, unmodified, to
virNetDevOpenvswitchAddPort.
There is no other behavioral change created by this patch.
Nuke the last vestiges of printing pid_t values with the wrong
types, at least in code compiled on mingw64. There may be other
places, but for now they are only compiled on systems where the
existing %d doesn't trigger gcc warnings.
* src/rpc/virnetsocket.c (virNetSocketNew): Use %lld and casting,
rather than assuming any particular int type for pid_t.
* src/util/command.c (virCommandRunAsync, virPidWait)
(virPidAbort): Likewise.
(verify): Drop a now stale assertion.
No thanks to 64-bit windows, with 64-bit pid_t, we have to avoid
constructs like 'int pid'. Our API in libvirt-qemu cannot be
changed without breaking ABI; but then again, libvirt-qemu can
only be used on systems that support UNIX sockets, which rules
out Windows (even if qemu could be compiled there) - so for all
points on the call chain that interact with this API decision,
we require a different variable name to make it clear that we
audited the use for safety.
Adding a syntax-check rule only solves half the battle; anywhere
that uses printf on a pid_t still needs to be converted, but that
will be a separate patch.
* cfg.mk (sc_correct_id_types): New syntax check.
* src/libvirt-qemu.c (virDomainQemuAttach): Document why we didn't
use pid_t for pid, and validate for overflow.
* include/libvirt/libvirt-qemu.h (virDomainQemuAttach): Tweak name
for syntax check.
* src/vmware/vmware_conf.c (vmwareExtractPid): Likewise.
* src/driver.h (virDrvDomainQemuAttach): Likewise.
* tools/virsh.c (cmdQemuAttach): Likewise.
* src/remote/qemu_protocol.x (qemu_domain_attach_args): Likewise.
* src/qemu_protocol-structs (qemu_domain_attach_args): Likewise.
* src/util/cgroup.c (virCgroupPidCode, virCgroupKillInternal):
Likewise.
* src/qemu/qemu_command.c(qemuParseProcFileStrings): Likewise.
(qemuParseCommandLinePid): Use pid_t for pid.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* src/conf/domain_conf.h (_virDomainObj): Likewise.
* src/probes.d (rpc_socket_new): Likewise.
* src/qemu/qemu_command.h (qemuParseCommandLinePid): Likewise.
* src/qemu/qemu_driver.c (qemudGetProcessInfo, qemuDomainAttach):
Likewise.
* src/qemu/qemu_process.c (qemuProcessAttach): Likewise.
* src/qemu/qemu_process.h (qemuProcessAttach): Likewise.
* src/uml/uml_driver.c (umlGetProcessInfo): Likewise.
* src/util/virnetdev.h (virNetDevSetNamespace): Likewise.
* src/util/virnetdev.c (virNetDevSetNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* src/conf/storage_conf.h (_virStoragePerms): Use mode_t, uid_t,
and gid_t rather than int.
* src/security/security_dac.c (virSecurityDACSetOwnership): Likewise.
* src/conf/storage_conf.c (virStorageDefParsePerms): Avoid
compiler warning.
Make it easier to detect invalid cross-directory includes, by
adding a syntax check. The check is designed to be extensible:
the default case lists only the non-driver directories, and
specific directories can list a different set (for example,
util/ can only use itself, network/ can only use itself, util/,
or conf/).
* .gnulib: Update to latest, for syntax check improvment.
* cfg.mk (sc_prohibit_cross_inclusion): New check.
(sc_prohibit_strncmp, sc_libvirt_unmarked_diagnostics): Simplify.
Commit 7c90026 added #include "conf/domain_conf.h" to
util/virrandom.c. Fortunately it didn't actually use anything from
domain_conf.h, since as far as I'm aware, files in util aren't allowed
to reference anything in conf (although the opposite is allowed). So
this #include is unnecessary.
I verified it still compiles with the line removed, but have placed a
one day moratorium on me doing any "trivial rule" pushes, so will
wait for someone else to verify/ACK before pushing.
Now virsh can call virDomainBlockRebase.
* tools/virsh.c (cmdBlockPull): Add --base parameter.
(blockJobImpl): Use it to expose BlockRebase API.
* tools/virsh.pod (blockpull): Document it.
This actually wires up the new optional parameter to block_stream:
http://wiki.qemu.org/Features/LiveBlockMigration/ImageStreamingAPI
The error checking is still sparse, since libvirt must not use
qemu-img or header probing on a qcow2 file in use by qemu to
check if the backing file name is valid; so for now, libvirt is
relying on qemu to diagnose an incorrect backing name. Fixing this
will require libvirt to track the entire backing file chain at the
time qemu is started and keeps it updated with snapshot and pull
operations.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJob): Add
parameter, and update callers.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJob): Update
signature.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJob): Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Update caller.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Likewise.
Block job commands are not part of upstream qemu until 1.1; and
proper support of job completion and cancellation depends on being
able to receive QMP events, which implies the JSON monitor.
Additionally, some early versions of block job commands were
backported to RHEL qemu, but these versions lacked asynchronous
job cancellation and partial block pull, so there are several
patches that will still be needed in this area of libvirt code
to support both flavors of block job commands.
Due to earlier patches in libvirt, we are guaranteed that all versions
of qemu that support block job commands already require libvirt to
use the JSON monitor. That means that the text version of block jobs
will not be used, and having to refactor two copies of the block job
handlers makes no sense. So instead, we delete the text handlers.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Drop text monitor
support.
* src/qemu/qemu_monitor_text.h (qemuMonitorTextBlockJob): Delete.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextParseBlockJobOne)
(qemuMonitorTextParseBlockJob, qemuMonitorTextBlockJob):
Likewise.
It's been a while, and we're between releases, so now's as good
a time as any to resync. This also fixes a build-breaker on
cygwin, where cygwin 1.7.11 introduced a header bug in <termios.h>.
* .gnulib: Update to latest.
* bootstrap: Resync.
* cfg.mk (sc_prohibit_strncmp): Copy upstream changes to
sc_prohibit_strcmp.
Add de-association handling for 802.1qbg (vepa) via lldpad
netlink messages. Also adds the possibility to perform an
association request without waiting for a confirmation.
Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
This code adds a netlink event interface to libvirt.
It is based upon the event_poll code and makes use of
it. An event is generated for each netlink message sent
to the libvirt pid.
Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
In qemu there are 2 cpu models (cpu64-rhel5 and cpu64-rhel6) not
supported by libvirt. This patch adds the support with the flags
specifications from /usr/share/qemu-kvm/cpu-model/cpu-x86_64.conf
The only difference is that AMD-specific features are removed so
the processor type is not vendor-specific. Those features are either
emulated or ignored by qemu if host CPU doesn't support them.
This patch adds a check to the libvirt-guests script to check for the
URI to be alive before attempting any calls. This avoids nasty error
messages and allows us to fail gracefully and continue on other URIs
configured in the script.
The libvirt-guests script tried to do a managed save of transient guest
that failed. This patch notifies which guests are transient (and not
being saved) and saves only the persistent ones.
