To support domUs with more than 4TB memory it is required to use
LIBXL_API_VERSION >= 0x040800, which uses uint64_t for certained guest
memory related quantities.
Unfortunately this change is not straight forward. While most of the
code in libxl.h handles the various LIBXL_API_VERSION variants
correctly, the check for valid a LIBXL_API_VERSION at the beginning of
the file was broken between Xen 4.7 and 4.13 - it did not cover for
API changes introduced in Xen 4.7 and 4.8. This was fixed with
xen-project/xen@c3999835df, which for libvirt means in practice either
the libxl API from Xen 4.5 or 4.13+ can be used.
This change uses pkgconfig to decide which API can be safely selected.
Xen provides a pkgconfig file since Xen 4.6, which is also the lowest
version expected by libvirt.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_set_memory_target, which changed the storage size of
parameter "target_memkb" in Xen 4.8.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_send_trigger, which got a new parameter
"ao_how" in Xen 4.12. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_set_vcpuonline, which got a new parameter
"ao_how" in Xen 4.12. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_get_free_memory, which changed storage size of parameter
"memkb" in Xen 4.8.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_domain_need_memory, which changed the storage size of
"need_memkb" in Xen 4.8. With Xen 4.12 the libxl_domain_config
parameter was changed
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_domain_unpause, which got a new parameter
"ao_how" in Xen 4.12. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_domain_pause, which got a new parameter
"ao_how" in Xen 4.12. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_domain_reboot, which got a new parameter
"ao_how" in Xen 4.12. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_domain_shutdown, which got a new parameter
"ao_how" in Xen 4.12. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_retrieve_domain_configuration, which got a new parameter
"libxl_asyncop_how" in Xen 4.12. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_domain_create_restore, which got a new parameter
"send_back_fd" in Xen 4.7. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
If QEMU_AUDIO_DRV is defined in the build host environment, several tests
in qemuxml2xmltest fail.
$ env | grep -i audio
AUDIODRIVER=pulseaudio
QEMU_AUDIO_DRV=pa
SDL_AUDIODRIVER=pulse
An example test failure with the above environment
907) QEMU XML-2-XML-active video-virtio-gpu-sdl-gl
In 'libvirt/tests/qemuxml2xmloutdata/video-virtio-gpu-sdl-gl.xml':
Offset 1244
Expect [v]
Actual [audio id='1' type='pulseaudio'/>
<v]
Scrub QEMU_AUDIO_DRV from the environment before executing the tests in
qemuxml2xmltest. SDL_AUDIODRIVER also needs scrubbed since it will be
examined if QEMU_AUDIO_DRV=sdl.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is available in QEMU with "ide-hd" and "scsi-hd" device
types. It was originally mistakenly added to the "scsi-block"
device type too, but later removed. This doesn't affect libvirt
since we restrict usage to device=disk.
When this property is not set then QEMU's default behaviour
is to not report any rotation rate information, which
causes most guest OS to assume rotational storage.
https://bugzilla.redhat.com/show_bug.cgi?id=1498955
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This lets the app expose the virtual SCSI or IDE disks as solid state
devices by setting a rate of '1', or rotational media by setting a
rate between 1025 and 65534.
https://bugzilla.redhat.com/show_bug.cgi?id=1498955
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Two blank lines are needed either side of functions.
Comments must have a single space character immediately after
the "#".
The unused exception variable can be removed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since /usr/local is where ports live, it's reasonable to assume
that a grep binary found in there will have been installed via
ports and will thus be GNU grep.
Suggested-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
macOS is similar to FreeBSD in that it ships non-GNU versions
of several utilities that we need in the base system.
macOS actually includes GNU make already, but unfortunately due
to licensing reasons the tool is permanently stuck in 2006, so
even in that case users are better off installing a recent
version from Homebrew along with the dozens of other libvirt
dependencies that already need to be obtained that way.
Note that, unlike FreeBSD ports, Homebrew is fully consistent
in adding the 'g' prefix to the name of the GNU tools, so we
can detect GNU grep without additional hacks.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
As explained in the comment in build-aux/Makefile.in, the
version of sed included in the FreeBSD base system is not GNU
sed, which our syntax-check rules expect; as a result, many
checks will fail with
gmake: gsed: No such file or directory
/bin/sh: gsed: not found
Similarly to what we're already doing with GNU make and GNU
grep, look for GNU sed during the configuration step and fail
early if it's not available.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
While this change doesn't look like it would improve things and
actually introduces a tiny bit of duplication, it's necessary in
order to prepares the stage for further changes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Currently, if GNU grep is not installed on a FreeBSD system the
configuration step will fail with
Program grep found: YES (/usr/bin/grep)
Program /usr/local/bin/grep found: NO
ERROR: Program '/usr/local/bin/grep' not found
which is confusing and not very useful; after this change, the
message will be
Program grep found: YES (/usr/bin/grep)
Program /usr/local/bin/grep found: NO
ERROR: Problem encountered: GNU grep not found
instead, which should do a better job helping the user figure
out that they need to install GNU grep from ports to proceed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We should always pass --werror and display the contents of the
log file in case of failure.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Previously, we accepted empty bridge name, because some old versions of
VMWare Workstation did not put it into the config. But this doesn't make
much sense - to have an interface type bridge with no name. We
circumvented this problem by generating an empty name but that is
equally wrong.
Therefore, fill in missing bridge names (according to the documentation
[1] the default bridge name is VMnet0) and error out if bridge name is
missing.
This partially reverts f246cdb5ac
1: https://docs.vmware.com/en/VMware-Workstation-Player-for-Linux/16.0/com.vmware.player.linux.using.doc/GUID-BAFA66C3-81F0-4FCA-84C4-D9F7D258A60A.html
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When testing locally built daemons on a systemd host there can be quite
a few systemd units that need temporarily stopping, and ideally
restarting after the test is complete. This becomes a massive burden
when modular daemons are running and you want to test libvirtd, as a
huge number of units need stopping.
The run script can facilitate this usage by looking at what units are
running and automatically stopping any that are known to conflict with
the daemon that is about to be run. This is only done when running as
root, since non-root libvirtd does not (currently) use systemd.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This fits with the goal of eliminating non-Python scripting languages,
and makes forthcoming changes far easier.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Mention some of the stuff we dealt with in this release.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Mention that libvirt-7.2 will be needed to do stuff that executes
'object-add'/'object-del' QMP commands with the upcoming qemu-6.0 and
that exec-restart of virtlockd and virtlogd was fixed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The
<os firmware='efi'>
<firmware type='efi'>
<feature enabled='no' name='enrolled-keys'/>
</firmware>
</os>
repeats the firmware attribute twice. This has no functional benefit, as
evidenced by fact that we use a single struct field to store both
attributes, while needlessly introducing an error scenario. The XML can
just be simplified to:
<os firmware='efi'>
<firmware>
<feature enabled='no' name='enrolled-keys'/>
</firmware>
</os>
which also means that we don't need to emit the empty element
<firmware type='efi'/> for all existing configs too.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This API talks to QEMU and changes its internal state. Therefore,
it should acquire QEMU_JOB_MODIFY instead of QEMU_JOB_QUERY.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This API interacts with the hypervisor and makes changes to its
behaviour, so must be protected by the write permission.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Since the functions provided by libpciaccess are not thread-safe,
when the udev-event and nodedev-init threads of libvirt call the
pci_get_strings function provided by libpaciaccess at the same
time the following can happen:
nodedev-init thread:
nodeStateInitializeEnumerate ->
udevEnumerateDevices->
udevProcessDeviceListEntry ->
udevAddOneDevice ->
udevGetDeviceDetails->
udevProcessPCI ->
udevTranslatePCIIds ->
pci_get_strings -> (libpciaccess)
find_device_name ->
populate_vendor ->
d = realloc( vend->devices, (vend->num_devices + 1), * sizeof( struct pci_device_leaf ) );
vend->num_devices++;
udev-event thread:
udevEventHandleThread ->
udevHandleOneDevice ->
udevAddOneDevice->
udevGetDeviceDetails->
udevProcessPCI ->
udevTranslatePCIIds ->
pci_get_strings -> (libpciaccess)
find_device_name ->
populate_vendor ->
d = realloc( vend->devices, (vend->num_devices + 1), * sizeof( struct pci_device_leaf ) );
vend->num_devices++;
Signed-off-by: WangJian <wangjian161@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Recently, a few commits back I've switched bunch of code to
g_steal_pointer() using coccinelle. Problem was that the semantic
patch used was slightly off:
@@
expression a, b;
@@
+ b = g_steal_pointer(&a);
- b = a;
... when != a
- a = NULL;
Problem is that, "... when != a" is supposed to jump over those
lines, which don't contain expression a. My idea was to replace
the following pattern too:
ptrX = ptrY;
if (something(ptrZ) < 0) goto error;
ptrY = NULL;
But what I missed is that the following pattern is also matched
and replaced:
ptrX = ptrY;
if (something(ptrX) < 0) goto error;
ptrY = NULL;
This is not necessarily correct - as demonstrated by our hotplug
code. The real problem is ambiguous memory ownership transfer
(functions which add device to domain def take ownership only on
success), but to not tackle the real issue let's revert those
parts.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Turns out, the way that glib implements g_steal_pointer() is not
compatible with function callbacks. And that's what my recent
patch did in virNetSocketEventFree(). Revert that part.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Notable changes:
* HAL is no longer installed on FreeBSD;
* the native version of libwsman is no longer installed in
containers intended for cross-compilation;
* Meson 0.55 rather than 0.54 is requested when installing
it from PyPI;
* GNU sed and GNU grep are installed explicitly everywhere.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
