qemu added the 'drive-mirror' command in v1.3.0 (d9b902db3fb71fdc)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu added the 'block-commit' command in v1.3.0 (ed61fc10e8c8d2)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This was detected by the presence of 'block-stream' which is present in
qemu since v1.1 (db58f9c0605fa151b8c4)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Failure of qemuMonitorGetVersion is fatal now that we only support QMP
based qemus. Remove the debug message since we report an error already.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If the detected qemu version is below our required version 'package'
would be leaked.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Move the check out of virQEMUCapsInitQMPMonitor similarly to other
functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Move the code out of virQEMUCapsInitQMPMonitor similarly to other
functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Move the check out of virQEMUCapsInitQMPMonitor similarly to other
functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Some caps are cleared according to some more advanced logic after
detection. Split all that logic out into virQEMUCapsInitProcessCaps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
virQEMUCapsInitQMPMonitor is massive now since it collects calls to the
various probing functions and also version based capabilities. Split
out the version based caps into a separate function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There is one specific caller (testInfoSetArgs() in
qemuxml2argvtest.c) which expect the va_list argument to change
after returning from the virQEMUCapsSetVAList() function.
However, since we are passing plain va_list this is not
guaranteed. The man page of stdarg(3) says:
If ap is passed to a function that uses va_arg(ap,type), then
the value of ap is undefined after the return of that function.
(ap is a variable of type va_list)
I've seen this in action in fact: on i686 the qemuxml2argvtest
fails on the second test case because testInfoSetArgs() sees
ARG_QEMU_CAPS and calls virQEMUCapsSetVAList to process the
capabilities (in this case there's just one
QEMU_CAPS_SECCOMP_BLACKLIST). But since the changes are not
reflected in the caller, in the next iteration testInfoSetArgs()
sees the QEMU capability and not ARG_END.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
And adjust virQEMUCapsSetList to use it. It will also be used in future
patches.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Set report=true for all enums currently formatted in the XML
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Only gic->supported needs an explicit BOOL_NO setting, all other
'supported' values are handling things correctly
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Switch most 'supported' handling to use virTristateBool, so eventually
we can handle the ABSENT state.
For now the XML formatter treats ABSENT the same as FALSE, so there's
no functional output change. This will be addressed in later patches
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
In some cases, the string representing architecture is different
in qemu and libvirt. That is the reason why we have
virQEMUCapsArchFromString() and virQEMUCapsArchToString(). So
far, we did not need them outside of qemu_capabilities code, but
this will change shortly. Expose them then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Most places in qemu_capabilities.c which call virQEMUCapsGetHostCPUData
actually need qemuMonitorCPUModelInfoPtr from QEMU caps. Let's use the
wrapper introduced in the previous commit instead.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a simple wrapper around virQEMUCapsGetHostCPUData usable in
tests for getting qemuMonitorCPUModelInfoPtr from QEMU caps.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code for transforming qemuMonitorCPUModelInfo data from QEMU into
virCPUDefPtr consumable by virCPU* APIs was hidden inside
virQEMUCapsInitCPUModelX86. This patch moves it into a new function to
make it usable in tests.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a single QEMU_CAPS_VIRTIO_PCI_TRANSITIONAL that
will be set if any of the following qemu devices are found:
virtio-blk-pci-transitional
virtio-blk-pci-non-transitional
virtio-net-pci-transitional
virtio-net-pci-non-transitional
vhost-scsi-pci-transitional
vhost-scsi-pci-non-transitional
virtio-rng-pci-transitional
virtio-rng-pci-non-transitional
virtio-9p-pci-transitional
virtio-9p-pci-non-transitional
virtio-balloon-pci-transitional
virtio-balloon-pci-non-transitional
vhost-vsock-pci-transitional
vhost-vsock-pci-non-transitional
virtio-input-host-pci-transitional
virtio-input-host-pci-non-transitional
virtio-scsi-pci-transitional
virtio-scsi-pci-non-transitional
virtio-serial-pci-transitional
virtio-serial-pci-non-transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Use the new helper when moving around the current node of the XPath
context.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuProcessQMPStart starts a QEMU process and monitor connection that
can be used by multiple functions possibly for multiple QMP commands.
The QMP exchange to exit capabilities negotiation mode and enter command
mode can only be performed once after the monitor connection is
established.
Move responsibility for entering QMP command mode into the
qemuProcessQMP code so multiple functions can issue QMP commands in
arbitrary orders.
This also simplifies the functions using the connection provided by
qemuProcessQMPStart to issue QMP commands.
Test code now needs to call qemuMonitorSetCapabilities to send the
message to switch to command mode because the test code does not use the
qemuProcessQMP command that internally calls qemuMonitorSetCapabilities.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Users qemuProcessQMP struct were always forced to call both
qemuProcessQMPStop and qemuProcessQMPFree when they are done with the
process. We can just call qemuProcessQMPStop from qemuProcessQMPFree and
let users call qemuProcessQMPFree only.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a replacement for qemuProcessQMPRun to make the name consistent
with qemuProcessStart. The original qemuProcessQMPRun function is
renamed as qemuProcessQMPLaunch and becomes one of the simpler functions
called from the main qemuProcessQMPStart entry point. The following
patches will move parts of the code in qemuProcessQMPLaunch to the other
functions (qemuProcessQMPInit and qemuProcessQMPConnectMonitor).
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Keep the pointer to QEMU stderr output in qemuProcessQMP struct instead
of requiring the caller to provide it (and free it).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's push the call to virQEMUCapsLogProbeFailure down the stack to
where the probing failure is detected.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While qemuProcessQMPRun and virQEMUCapsInitQMPMonitor* functions called
from virQEMUCapsInit ignore some errors, the caller of virQEMUCapsInit
would report an error unless usedQMP is true anyway. And since usedQMP
can only be true if the probing code really succeeded (i.e., no errors
were ignored), we can just simplify the logic by not ignoring the errors
in the first place.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function contains two almost identical parts. Let's consolidate them
into a single helper function and call it twice.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In new process code, move from model where qemuProcessQMP struct can be
used to activate a series of Qemu processes to model where one
qemuProcessQMP struct is used for one and only one Qemu process.
By allowing only one process activation per qemuProcessQMP struct, the
struct can safely store process outputs like status and stderr, without
being overwritten, until qemuProcessQMPFree is called.
By doing this, process outputs like status and stderr can remain stored
in the qemuProcessQMP struct without being overwritten by subsequent
process activations.
The forceTCG parameter (use / don't use KVM) will be passed when the
qemuProcessQMP struct is initialized since the qemuProcessQMP struct
won't be reused.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virQEMUCapsInitQMP now stops QEMU process in all execution paths,
before freeing the process structure.
The qemuProcessQMPStop function can be called multiple times without
problems... Won't attempt to stop processes and free resources multiple
times.
Follow the convention established in qemu_process of
1) alloc process structure
2) start process
3) use process
4) stop process
5) free process data structure
The process data structure persists after the process activation fails
or the process dies or is killed so stderr strings can be retrieved
until the process data structure is freed.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
s/qemuProcessQMPAbort/qemuProcessQMPStop/ applied to change function
name used to stop QEMU processes in process code moved from
qemu_capabilities.
No functionality change.
The new name, qemuProcessQMPStop, is consistent with the existing
function qemuProcessStop used to stop Domain processes.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
s/cmd/proc/ in process code imported from qemu_capabilities.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU process code in qemu_capabilities.c is moved to qemu_process.c in
order to make the code usable outside the original capabilities use
cases.
The moved code activates and manages QEMU processes without establishing
a guest domain.
This patch is a straight cut/paste move between files.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since commit a7424faff QMP is always used.
Also, commit 932534e8 removed the last use of this apart from:
* parsing/formatting this in the caps cache
* using it as a temporary variable to know when to report an error
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We want the signatures to be consistent, and also we're
going to start using the additional parameter next.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
QEMU plans to deprecate 'query-events' as it's non-extensible. Events
are also described by 'query-qmp-schema' so we can use that one instead.
This patch adds detection of events to
virQEMUCapsProbeQMPSchemaCapabilities using the same structure declaring
them for the old approach (virQEMUCapsEvents). This is possible as the
name is the same in the QMP schema and our detector supports that
trivially.
For any complex queries virQEMUCapsQMPSchemaQueries can be used in the
future.
For now we still call 'query-events' and discard the result so that it's
obvious that the tests pass. This will be cleaned up later.
https://bugzilla.redhat.com/show_bug.cgi?id=1673320
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The property allows to control the guest-visible content of the vendor
specific designator of the 'Device Identification' page of a SCSI
device's VPD (vital product data).
QEMU was leaking the id string of -drive as the value if the 'serial' of
the disk was not specified. Switching to -blockdev would impose an ABI
change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The split of ide-disk into the two separate devices was introduced by
qemu commit 1f56e32a7f4b3 released in qemu v0.15.
Note that when compared to the previous commit which made sure that no
disk related tests were touched, in this case it's not as careful.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
