Add new function to manage adding the -global controller options to
the command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the -boot options to the command
line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the power management options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the '-clock' options to the command
line removing that task from the mainline qemuBuildCommandLine.
Also includes some minor formatting cleanups.
Signed-off-by: John Ferlan <jferlan@redhat.com>
When debug-threads is enabled, individual threads are given a separate
name (on Linux)
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1140121
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
QEMU (somewhere around 2.0) added a new sub-option to the -name flag
-name debug-threads=on.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
- Add line-height:150% spacing for all text. This makes text lines far
less cramped, and seems closer visually to what wikipedia uses.
- Remove bottom and top margin from lists: entries seemed needlessly
spread out.
- Reduce sublist indentation a bit
- Add a bottom border after headings: IMO this greatly helps in break
up the vertical flow of a big page of text. Doesn't look great on the
front page, but helps a lot on dense pages like formatdomain
- change font-family to just 'sans-serif' rather than hardcode a few
font families. this means we abide the user's browser font setting,
and makes us consistent with other sites like en.wikipedia.org
- raise font-size to 90%. this is what en.wikipedia.org uses.
With these two tweaks, libvirt.org text renders the same as
en.wikipedia.org with fedora firefox out of the box config. Previously
the font on libvirt.org was very small and difficult to read.
Currently the file based character devices let QEMU write
directly to a file on disk. This allows a malicious QEMU
to inflict a denial of service by consuming all free space.
Switch QEMU to use a pipe to virtlogd, which will enforce
file rollover.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If use of virtlogd is enabled, then use it for backing the
character device log files too. This avoids the possibility
of a guest denial of service by writing too much data to
the log file.
The virtlogd daemon currently opens all files for append, but
in some cases the user may wish to discard existing data. Define
a new flag to indicate that logfiles should be truncated when
opening.
The functions for handling FD passing when building command line
arguments need to be used by many different bits of code, so need
to be at the start of the source file
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The act of formatting a chardev backend value may need to
append command line arguments for passing FDs. If we append
the -chardev arg before formatting the value, then the
resulting arguments will end up interspersed
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Honour the <log file='...'/> element in chardevs to output
data to a file. This requires QEMU >= 2.6
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Extend the chardev source XML so that there is a new optional
<log/> element, which is applicable to all character device
backend types. For example, to log output of a TCP backed
serial port
<serial type='tcp'>
<source mode='connect' host='127.0.0.1' service='9999'/>
<protocol type='raw'/>
<log file='/var/log/libvirt/qemu/demo-serial0.log' append='on'/>
<target port='0'/>
</serial>
Not all hypervisors will support use of logfiles.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Not all callers of virLogManagerDomainOpenLogFile will
care about getting the current inode/offset, so we should
allow those parameters to be NULL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Now that the function was extracted we can get rid of some temp
variables. Additionally formatting of the bitmap string for the event
code should be checked.
Allow pinning for inactive vcpus. The pinning mask will be automatically
applied as we would apply the default mask in case of a cpu hotplug.
Setting the scheduler settings for a vcpu has the same semantics.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1306556
Introduce VIR_DOMAIN_DEF_FEATURE_OFFLINE_VCPUPIN domain feature flag
whcih will allow to skip ignoring of the pinning information for
hypervisor drivers which will want to implement forward-pinning of
vcpus.
Introduce a helper to check supported device and domain config and move
the memory hotplug checks to it.
The advantage of this approach is that by default all new features are
considered unsupported by all hypervisors unless specifically changed
rather than the previous approach where every hypervisor would need to
declare that a given feature is unsupported.
To avoid having to forbid new features added to domain XML in post parse
callbacks for individual hypervisor drivers the feature flag mechanism
will allow to add a central check that will be disabled for the drivers
that will add support.
As a first example flag, the 'hasWideSCSIBus' is converted to the new
bitmap.
The API docs state that the API queries pinning info for all vCPUs and
thus we should allocate the bitmap even for the inactive ones.
The API will currently return bitmap only for the active vCPUs but that
will change in the future.
The VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event will be triggered once a job
(such as migration) finishes and it will contain statistics for the job
as one would get by calling virDomainGetJobStats. Thanks to this event
it is now possible to get statistics of a completed migration of a
transient domain on the source host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We would happily report and free statistics of a completed migration
even before it actually completed (on the source host while migration is
in the Finish phase).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Computing a total downtime during a migration requires us to store a
time stamp when guest CPUs get stopped. The value (and all other
statistics) is then transferred to the destination to compute the
downtime. Because the stopped time stamp is stored by a STOP event
handler while the statistics which will be sent over to the destination
are copied synchronously within qemuMigrationWaitForCompletion.
Depending on the timing of STOP and MIGRATION events, we may end up
copying (and transferring) statistics without the stopped time stamp
set. Let's make sure we always use the correct time stamp.
https://bugzilla.redhat.com/show_bug.cgi?id=1282744
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
With a very old QEMU which doesn't support events we need to explicitly
call qemuMigrationSetOffline at the end of migration to update our
internal state. On the other hand, if we talk to QEMU using QMP, we
should just wait for the STOP event and let the event handler update the
state and trigger a libvirt event.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We should not overwrite all migration statistics on the source with the
numbers sent by the destination since the source may have an updated
view in some cases (such as post-copy migration). It's safer to update
just the timing info we need to get from the destination and be prepared
for the future. And we should only do all this after a successful
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Statistics for a completed migration only make sense if the migration
was successful. Let's not store them in priv->job.completed until we
are sure it was a success.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The comment claimed that virPCIDeviceReattach() does not reattach
a device to the host driver; except it actually does, so the
comment is just confusing and we're better off removing it.
Replace the term "loop" with the more generic "step". This allows us
to be more flexible and eg. have a step that consists in a single
function call.
Don't include the number of steps in the first comment of the
function, so that we can add or remove steps without having to worry
about keeping that comment in sync.
For the same reason, remove the summary contained in that comment.
Clean up some weird vertical spacing while we're at it.
The 'actualCount' variable, formerly just 'count', is only used
internally by the macro, so it's better to move its declaration
inside the macro as well: this way, it doesn't have to be declared
by every single user.
The new name is less generic to make clashes less likely.
