Apart from virDomainDefValidate, virDomainDefPostParse is another
place where operating on info-less devices makes sense.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Ignore @source in the case of the test driver and return fixed private
IPv4 addresses for all the interfaces defined in the domain.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Creating firewall rules for the virtual networks causes the kernel to
load the conntrack module. This imposes a significant performance
penalty on Linux network traffic. Thus we want to only take that hit if
we actually have virtual networks running.
We need to create global firewall rules during startup in order to
"upgrade" rules for any running networks created by older libvirt.
If no running networks are present though, we can safely delay setup
until the time we actually start a network.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Pull the logic for creating global iptables chains into a separate
method and protect its invocation with virOnce, to make it possible
to reuse it in non-startup paths.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Mostly add comments explaining why there are two capabilites
for the same feature and how they interact.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Device validation should not have to wait until command line
generation time. Moving the code to a separate function also
allows us to avoid some unnecessary repetition.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename the DOMAIN_DEVICE_ITERATE_GRAPHICS flag.
It was introduced by commit dd45c2710f
with the intention to run the Validate callback even on the graphics
device.
However, enumerating every single device in virDomainDeviceIterateFlags
is unsustainable and what really was special about the graphics device
was the lack of DeviceInfo.
Rename the flag and iterate over more info-less devices. (and leases)
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Although there's currently only support for SEV, it's likely other
solutions will appear, so we should not refer to the documentation
section simply with 'sev'.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Due to the way that our virObjectUnref() is written it's not
possible that a NULL is passed into *Dispose() function. However,
some functions check for that regardless.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Make sure validation is working as intended by trying to use
Intel IOMMU with the i440fx machine type, though we know it's
a q35-only feature, and expecting an error to be returned.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can drop the intel-iommu-machine test case while doing so,
since it is supposed to showcase how we generate different
command lines for older QEMU versions and we can do that
using a single input file now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove a bunch of irrelevant devices and make sure all input
files explicitly opt out of USB controllers: the latter change
will help later, when we start using DO_TEST_CAPS_*().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Forbid breaking lines inside the two branches of the ternary operator
and nesting them. Using it in these instances does not help readability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Document that checking if a integer is (non-)zero should (not must)
avoid the shortened form that C allows as it may confuse readers into
overlooking the other possible values which might be interresting to
handle.
While pointers have distinct values from the point of view of the code
we only care whether it's non-NULL and thus it's documented it's okay
to shorten those.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
State that error messages should not be broken into multiple lines for
programmer friendliness and should not be concatenated on the fly for
translator friendliness and few other details.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Split out the 'shallow' and 'reuse' flags as booleans rather than passing
in flags and constructing them in irrelevant APIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split out the 'shallow' flag as a boolean argument rather than passing
in flags and constructing them in irrelevant APIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The NBD migration code uses drive/blockdev-mirror internally. In those
APIs we pass around flags for the monitor commands which are based on
the flags for the virDomainBlockRebase API. Since there's only one flag
which changes, pass it around explicitly rather than obscuring it in a
bitfield.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
At the point when we want to modify the permissions for the 'mirror' we
know whether it is supposed to have a backing chain or no. Given that
mirror->backingStore is populated only when we'd need to touch it ayways
we can use qemuDomainStorageSourceChainAccessAllow even in place of
qemuDomainStorageSourceAccessAllow used for other cases to simplify the
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
One code path open-coded qemuDomainStorageSourceChainAccessAllow badly
and also did not integrate with the locking code.
Replace the separate calls with qemuDomainStorageSourceChainAccessAllow
which does everything internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since 4e797f1a we parse backingStore of mirror which will later be used
with blockdev. Add some validation for the user passed mirror at the
current point to make sure it's not used improperly.
Validate that it's not used without blockdev and also that it's not
passed when not requesting a shallow copy. Also add a chain terminator
for a deep copy since we know the resulting mirror will not have chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since 3decae00e9 qemuDomainStorageSourceAccessAllow revokes the
permissions it granted if it fails halfway, thus we can remove some
calls to qemuDomainStorageSourceAccessRevoke which tried to undo this
situation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since 3decae00e9 qemuDomainStorageSourceAccessRevoke keeps the libvirt
error which was set prior to the call around even after the call, thus
we don't need to do the same when reverting access in the block copy
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When aborting or pivoting a block job we record which operation we do
for the mirror in the virDomainDiskDef structure. As everything is
synchronized by a job it's not necessary to modify the state prior to
calling the monitor and resetting the state on failure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All blockjobs get their status updated by events from qemu, so this code
no longer makes sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When used with the new job handler the values will also include some of
the non-public values from qemuBlockjobState. Modify the comment to
clarify this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virtlogd daemon's only intended client is the libvirtd daemon. As
such it should never allow clients from other user accounts to connect.
The code already enforces this and drops clients from other UIDs, but
we can get earlier (and thus stronger) protection against DoS by setting
the socket permissions to 0600
Fixes CVE-2019-10132
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virtlockd daemon's only intended client is the libvirtd daemon. As
such it should never allow clients from other user accounts to connect.
The code already enforces this and drops clients from other UIDs, but
we can get earlier (and thus stronger) protection against DoS by setting
the socket permissions to 0600
Fixes CVE-2019-10132
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The admin protocol RPC messages are only intended for use by the user
running the daemon. As such they should not be allowed for any client
UID that does not match the server UID.
Fixes CVE-2019-10132
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In attempt to getting rid of errN labels let's start with the
most upper one and rename it to 'error'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This reverts commit dfd70ca1eb.
Pushed by a mistake, sorry. There's still some discussion going
on upstream.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The libvirt-daemon-driver-qemu RPM has historically had a hard
dependency on the libvirt-daemon-driver-network and
libvirt-daemon-driver-storage-core packages. This was because the QEMU
driver would directly call into APIs that were part of these drivers.
The dependency to the storage driver was eliminated in
commit 064fec69be
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Jan 25 09:35:46 2018 +0000
storage: move storage file backend framework into util directory
The dependency to the network driver was eliminated in
commit 5b13570ab8
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Jan 25 09:35:47 2018 +0000
conf: introduce callback registration for domain net device allocation
commit 1438aea4ee
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Jan 25 09:35:48 2018 +0000
conf: expand network device callbacks to cover bandwidth updates
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Qemu added reporting of virtio balloon new statistics stat-htlb-pgalloc and
stat-htlb-pgfail since qemu-3.0 commit b7b12644297. The value of
stat-htlb-pgalloc represents the number of successful hugetlb page allocations
while stat-htlb-pgfail represents the number of failed ones. Add this
statistics reporting to libvirt.
To enable this feature for vm, guest kenel >= 4.17 is required because
the exporting hugetlb page allocation for virtio balloon is introduced
since 6c64fe7f.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Snapshot create operation saves the live XML and uses it to replace the
domain definition in case of revert. But the VM config XML is not saved
and the revert operation does not address this issue. This commit
prevents the config XML from being overridden by snapshot definition.
An active domain stores both current and new definitions. The current
definition (vm->def) stores the live XML and the new definition
(vm->newDef) stores the config XML. In an inactive domain, only the
config XML is persistent, and it's saved in vm->def.
The revert operation uses the virDomainObjAssignDef() to set the
snapshot definition in vm->newDef, if domain is active, or in vm->def
otherwise. But before that, it saves the old value to return to
caller. This return is used here to restore the config XML after
all snapshot startup process finish.
Signed-off-by: Maxiwell S. Garcia <maxiwell@linux.ibm.com>
We can't rely on $(noinst_PROGRAMS) retaining its original
value, so let's use a separate $(EXAMPLES) variable instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If an FD is passed into a child using:
virCommandPassFD(cmd, fd, VIR_COMMAND_PASS_FD_CLOSE_PARENT);
then the parent should refrain from touching @fd thereafter. This
is even documented in virCommandPassFD() comment. The reason is
that either at virCommandRun()/virCommandRunAsync() or
virCommandFree() time the @fd will be closed. Closing it earlier,
e.g. right after virCommandPassFD() call might result in
undesired results. Another thread might open a file and receive
the same FD which is then unexpectedly closed by virCommandFree()
or virCommandRun().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Various binaries are statically linking to libvirt_util.la and
other intermediate libraries we build. These intermediate libs
all get built into the main libvirt.so shared library eventually,
so we can dynamically link to that instead and reduce the on disk
footprint.
In libvirt-daemon RPM:
virtlockd: 1.6 MB -> 153 KB
virtlogd: 1.6 MB -> 157 KB
libvirt_iohelper: 937 KB -> 23 KB
In libvirt-daemon-driver-network RPM:
libvirt_leaseshelper: 940 KB -> 26 KB
In libvirt-daemon-driver-storage-core RPM:
libvirt_parthelper: 926 KB -> 21 KB
IOW, about 5.6 MB total space saving in a build done on Fedora 30
x86_64 architecture.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We provide default values for both MODPROBE and RMMOD and thus
there is no way that their paths can be empty strings.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
