In this patch I am extending the rule instantiator to create the state
match according to the state attribute in the XML. Only one iptables
rule in the incoming or outgoing direction will be created for a rule
in direction 'in' or 'out' respectively. A rule in direction 'inout' does
get iptables rules in both directions.
The xm internal xen driver only supports disk and network devices to be
added to a guest. On an attempt to attach any other device the xm driver
used VIR_ERR_XML_ERROR which resulted in a completely bogus error
message:
error: Failed to attach device from pci.xml
error: XML description for unknown device is not well formed or invalid
Since version 4.1 ESX(i) can expose virtual serial devices over TCP.
Add support in the VMX handling code for this, add test cases to cover
it and add links to some documentation.
ESX supports two additional protocols: TELNETS and TLS. Add them to
the list of serial-over-TCP protocols.
The <vcpu cpuset=...> attribute has been available since commit
e193b5dd, but without documentation or RNG validation.
* docs/schemas/domain.rng (vcpu): Further validate cpuset.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.c: Fix typos.
Description: Implement AppArmorSetSecurityHostdevLabel() and
AppArmorRestoreSecurityHostdevLabel() for hostdev and pcidev attach.
virt-aa-helper also has to be adjusted because *FileIterate() is used for pci
and usb devices and the corresponding XML for hot attached hostdev and pcidev
is not in the XML passed to virt-aa-helper. The new '-F filename' option is
added to append a rule to the profile as opposed to the existing '-f
filename', which rewrites the libvirt-<uuid>.files file anew. This new '-F'
option will append a rule to an existing libvirt-<uuid>.files if it exists,
otherwise it acts the same as '-f'.
load_profile() and reload_profile() have been adjusted to add an 'append'
argument, which when true will use '-F' instead of '-f' when executing
virt-aa-helper.
All existing calls to load_profile() and reload_profile() have been adjusted
to use the old behavior (ie append==false) except AppArmorSetSavedStateLabel()
where it made sense to use the new behavior.
This patch also adds tests for '-F'.
Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/640993
In this patch I am extending the rule instantiator to create the comment
node where supported, which is the case for iptables and ip6tables.
Since commands are written in the format
cmd='iptables ...-m comment --comment \"\" '
certain characters ('`) in the comment need to be escaped to
prevent comments from becoming commands themselves or cause other
forms of (bash) substitutions. I have tested this with various input and in
my tests the input made it straight into the comment. A test case for TCK
will be provided separately that tests this.
When creating a new gust, the function phypBuildLpar() was not
checking for NULL values
src/phyp/phyp_driver.c: check the definition arguments to avoid a segmentation
fault in phypBuildLpar()
This reverses commit 04c3704, which added a define to nwfilter to
allow libvirtd compilation on Mac OS X. Stefan Bergers commit, 2e7294d,
is the proper solution, removing the requirement for nwfilter on non-Linux.
The patch below reports a warning in the log if the generated ip(6)tables rules would not be effective due to the proc filesystem entries
/proc/sys/net/bridge/bridge-nf-call-iptables
/proc/sys/net/bridge/bridge-nf-call-ip6tables
containing a '0'. The warning tells the user what to do. I am rate-limiting the warning message to appear only every 10 seconds.
Description: Check for VIR_DOMAIN_CHR_TYPE in serial ports and add 'rw' for
defined serial ports, parallel ports and channels
Bug-Ubuntu: LP: #578527, LP: #609055
pciFindStubDriver currently returns 0 in one of the error cases.
While it's correct...NULL is more readable.
Signed-off-by: Chris Wright <chrisw@redhat.com>
The addrToString methods were not coping with UNIX domain sockets
which have no normal host+port address. Hardcode special handling
for these so that SASL routines can work over UNIX sockets. Also
fix up SSF logic in remote client so that it presumes that a UNIX
socket is secure
* daemon/remote.c: Fix addrToString for UNIX sockets.
* src/remote/remote_driver.c: Fix addrToString for UNIX sockets
and fix SSF logic to work for TLS + UNIX sockets in the same
manner
When nwfilter support was added to UML, I didn't realise the UML driver
needed instrumentation to make updating nwfilters on the fly work. This
patch adds this bit of glue.
Signed-off-by: Soren Hansen <soren@linux2go.dk>
* src/Makefile.am (libvirt.def, libvirt_qemu.def): '\}' and '\t'
are not required by POSIX. Use '}' and literal tab instead.
(install-data-local): Avoid sed -i.
* tests/read-bufsiz: Likewise.
Reported by Mitchell Hashimoto.
The current code will go into an infinite loop if the printf generated
string is >= 1000, AND exactly 1 character smaller than the amount of free
space in the buffer. When this happens, we are dropped into the loop body,
but nothing will actually change, because count == (buf->size - buf->use - 1),
and virBufferGrow returns unchanged if count < (buf->size - buf->use)
Fix this by removing the '- 1' bit from 'size'. The *nprintf functions handle
the NULL byte for us anyways, so we shouldn't need to manually accommodate
for it.
Here's a bug where we are actually hitting this issue:
https://bugzilla.redhat.com/show_bug.cgi?id=602772
v2: Eric's improvements: while -> if (), remove extra va_list variable,
make sure we report buffer error if snprintf fails
v3: Add tests/virbuftest which reproduces the infinite loop before this
patch, works correctly after
Apparently the xen block device statistics moved from
"/sys/devices/xen-backend/vbd-%d-%d/statistics/%s"
to
"/sys/bus/xen-backend/devices/vbd-%d-%d/statistics/%s"
* src/xen/block_stats.c: try the extra path in case of failure to
find the statistics in /sys
A QEMU guest can have upto VIR_DOMAIN_BOOT_LAST boot entries
defined. When building the QEMU arg, each entry takes a
single byte. This means the array must be declared to be
VIR_DOMAIN_BOOT_LAST+1 bytes in length to allow for the
trailing null
* src/qemu/qemu_conf.c: Fix off-by-1 boot arg array size
For static-only DHCP, i.e. with no <range> but at least one <host>
element within <dhcp> element, we have to add "--dhcp-range IP,static"
option to dnsmasq to actually enable the service. Without this option,
dnsmasq will not respond to DHCP requests.
QMP in QEMU 0.13 has been fixed to enforce type correctness,
this means that boolean types must be true or false, not
integers.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
QMP in QEMU 0.13 has been fixed to enforce type correctness,
this means that boolean types must be true or false, not
integers.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Before this commit SessionIsActive was not used because ESX(i)
doesn't implement it. vCenter supports SessionIsActive, so use
it here, but keep the fall back mechanism for ESX(i) and GSX.
QueryVirtualDiskUuid is only available on an ESX(i) server. vCenter
returns an NotImplemented fault and a GSX server is missing the
VirtualDiskManager completely. Therefore only use QueryVirtualDiskUuid
with an ESX(i) server and fall back to path as storage volume key for
vCenter and GSX server.
VirtualDisks are .vmdk file based. Other files in a datastore
like .iso or .flp files don't have a UUID attached, fall back
to the path as key for them.
This patch adds support for ethernet interface type to OpenVZ domains
as stated in this previous message: http://www.redhat.com/archives/libvir-
list/2010-July/msg00658.html
Instead of splitting the path part of a datastore path into
directory and file name, keep this in one piece. An example:
"[datastore] directory/file"
was split into this before:
datastoreName = "datastore"
directoryName = "directory"
fileName = "file"
Now it's split into this:
datastoreName = "datastore"
directoryName = "directory"
directoryAndFileName = "directory/file"
This simplifies code using esxUtil_ParseDatastorePath, because
directoryAndFileName is used more often than fileName. Also the
old approach expected the datastore path to reference an actual
file, but this isn't always correct, especially when listing
volumes. In that case esxUtil_ParseDatastorePath is used to parse
a path that references a directory. This fails for a vpx://
connection because the vCenter returns directory paths with a
trailing '/'. The new approach is robust against this and the
actual decision if the datastore path should reference a file or
a directory is up to the caller of esxUtil_ParseDatastorePath.
Update the tests accordingly.
For privileged UML connections (uml:///system), we shouldn't use root's
home dir, but rather somewhere in /var/run/libvirt/uml-guest.
https://bugzilla.redhat.com/show_bug.cgi?id=499536
Signed-off-by: Soren Hansen <soren@linux2go.dk>
uml_dir overrides user-mode-linux's default of ~/.uml. This is needed
for a couple of different reasons:
libvirt expects this to default to virGetUserDirectory(geteuid()) +
'/.uml'. However, user-mode-linux actually uses the HOME environment
variable to determine where to look for the uml sockets, but if running
libvirtd under sudo (which I routinely do during development), $HOME is
pointing at my user's homedir, while my euid is 0, so libvirt looks in
/root.
Also (and this was my actual motivation for this patch), if HOME isn't
set at all, user-mode-linux utterly fails. Looking at the code, it seems
it's meant to emit a warning, but alas, it doesn't for some reason.
If running libvirtd from upstart, HOME is not set, so any system using
upstart will need this change.
Signed-off-by: Soren Hansen <soren@linux2go.dk>
Xen4.0 includes a new blktap2 implementation, which is specified
with 'tap2' prefix. AFAICT it's configuration syntax is identical
to blktap, with exception of 'tap2' vs 'tap' prefix. This patch
takes the simple approach of accepting and generating sexp
containing 'tap2' prefix.
When creating a new domain from XML, the check for an existing
domain name should compare the return of the function to a valid
LPAR ID (!= -1) and not to error (== -1).
The check was altered in 8c48743b97
and got too strict, I've no clue how that snuck in. This check
makes every try to open a connection using the ESX driver fail
with an invalid argument error.
Revert the change to the check and add a comment to prevent future
mistakes with this check.
UML supports hot plugging and unplugging of various devices. This patch
exposes this functionality for disks.
Signed-off-by: Soren Hansen <soren@linux2go.dk>
Other drivers will need this same functionality, so move it to up to
conf/domain_conf.c and give it a more general name.
Signed-off-by: Soren Hansen <soren@linux2go.dk>
When finding a sparse NUMA topology, libnuma will return ENOENT
the first time it is invoked. On subsequent invocations it
will return success, but with an all-1's CPU mask. Check for
this, to avoid polluting the capabilities XML with 4096 bogus
CPUs
* src/nodeinfo.c: Check for all-1s CPU mask
Enabling debug doesn't show the capabilities XML for a connection.
Add an extra debug statement for the return value
* src/libvirt.c: Enable debug logging of capabilities XML
Like the comment suggested, we just open the file and pass the file
descriptor to uml. The input "stream" is set to "null", since I couldn't
find any useful way to actually use a file for input for a chardev and
this also mimics what e.g. QEmu does internally.
Signed-off-by: Soren Hansen <soren@linux2go.dk>
Instead of using one big traversal spec for lookup use a set of
more fine grained traversal specs that are selected based on the
actual needs of the lookup.
This gives up to 20% speedup for certain operations like domain
listing due to less HTTP(S) traffic.
* src/xenapi/xenapi_driver.c (xenapiDomainGetInfo): Avoid using
XEN_VM_POWER_STATE_UNKNOWN, which disappeared in newer xenapi.
* src/xenapi/xenapi_utils.c (mapPowerState): Likewise.
Previously QEMU enabled KQEMU by default and had -no-kqemu.
0.11.x switched to requiring -enable-kqemu. 0.12.x dropped
kqemu entirely. This patch adds support for -enable-kqemu
so 0.11.x works. It replaces a huge set of if() with a
switch() to make the code a bit more readable.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Support
-enable-kqemu
With the previous storage pool UUID source not all storage pools
had a proper UUID, especially GSX storage pools. The mount path
is unique per host and cannot change during the lifetime of the
datastore. Therefore, it's MD5 sum can be used as UUID.
Use gnulib's crypto/md5 module to generate the MD5 sum.
Xen supports on_crash actions coredump-{destroy,restart}. libvirt
cannot parse config returned by xend that contains either of these
actions
xen52 # xm li -l test | grep on_crash
(on_crash coredump-restart)
xen52 # virsh dumpxml test
error: internal error unknown lifecycle type coredump-restart
This patch adds a new virDomainLifecycleCrash enum and appends
the new options to existing destroy, restart, preserve, and
rename-restart options.
We already filled the PCI address structure when we checked whether it's
free or not, so let's just use the structure here instead of filling it
again.
I wrote a patch to add support for listing the Vendor and Model of a
storage pool in the storage pool XML. This would allow vendor
extensions of specific devices. The patch includes a test for the new
attributes as well.
Patrick Dignan
* src/uml/uml_driver.c (umlMonitorCommand): Validate that enough
bytes were read to dereference both res.length, and that many
bytes from res.data.
Reported by Soren Hansen.
node_device/node_device_driver.c: In function 'nodeDeviceVportCreateDelete':
node_device/node_device_driver.c:423: error: implicit declaration of function 'stat' [-Wimplicit-function-declaration]
* src/node_device/node_device_driver.c (includes): Add <sys/stat.h>.
Doing `virsh schedinfo rhel5u3 --cap 65535' the hypervisor does the
call, but does not change the value nor raise an error. Best is just to
consider it's not in the allowed values. The problem is that the error
won't be output since the xend driver will then be called and raise an
error
error: this function is not supported by the hypervisor: unsupported
in xendConfigVersion < 4
which will override the useful information from
xenUnifiedDomainSetSchedulerParameters(). So best is to also invert the
order in which the xen sub-drivers are called.
* src/xen/xen_hypervisor.c: mark 65535 cap value as out of bound
* src/xen/xen_hypervisor.c: reverse the order of the calls to the xen
sub drivers to get the error message if needed
Some kernels, such as the one used in RHEL-5, have vport_create and
vport_delete operation files in /sys/class/scsi_host/hostN directory
instead of /sys/class/fc_host/hostN. Let's check both paths for
compatibility reasons.
This also removes unnecessary '/' characters from sysfs paths containing
LINUX_SYSFS_FC_HOST_PREFIX.
NodeDeviceCreateXML and NodeDeviceDestroy methods added for NPIV were
using the wrong privateData field for the remote driver. This doesn't
impact KVM, since the remote driver handles everything, thus
privateData == devMonPrivateData. It does impact Xen though, because
the remote driver only handles a subset of methods and thus
privateData != devMonPrivateData.
In case an optional object cannot be found the lookup function is
left early and the cleanup code is not executed.
This pattern occurs in some other functions too.
The current version of the qemu managed save implementation
is subject to a race where the domain shuts down between
the time that we start the command and the time that we
actually try to do the save. Close this race by making
qemuDomainSaveFlags() expect both the driver and the passed-in
vm object to be locked before executing.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When reconnecting to existing VMs, we re-reserved only those PCI
addresses which were explicitly mentioned in domain XML. Since some
addresses are always reserved (e.g., 0:0:0 and 0:0:1), we need to handle
those too.
Also all this should only be done if device flag is supported by qemu.
In this patch I am extending and fixing the nwfilter module's reload support to stop all ongoing threads (for learning IP addresses of interfaces) and rebuild the filtering rules of all interfaces of all VMs when libvirt is started. Now libvirtd rebuilds the filters upon the SIGHUP signal and libvirtd restart.
About the patch: The nwfilter functions require a virConnectPtr. Therefore I am opening a connection in qemudStartup, which later on needs to be closed outside where the driver lock is held since otherwise it ends up in a deadlock due to virConnectClose() trying to lock the driver as well.
I have tested this now for a while with several machines running and needing the IP address learner thread(s). The rebuilding of the firewall rules seems to work fine following libvirtd restart or a SIGHUP. Also the termination of libvirtd worked fine.
floppy0.present defaults to true. Therefore, it needs to be
explicitly set to false when the XML config doesn't specify the
corresponding floppy device.
Also update tests accordingly.
I changed virStorage[Open|Close] to virVIOSDriver[Open|Close] so
the network driver can use it - since the network driver deals
with Open/Close in the same way.
This patch does two things:
* It makes umlConnectTapDevice ask brAddTap for a persistent tap by
passing it a NULL tapfd argument.
* Stops umlConnectTapDevice from immediately dismantling the bridge
it just set up.
Signed-off-by: Soren Hansen <soren@linux2go.dk>
When passing a NULL tapfd argument to brAddTap, we need to close the fd
of the tap device. If we don't, libvirt will keep the fd open
indefinitely and renders the the guest unable to configure its side of
the tap device.
Signed-off-by: Soren Hansen <soren@linux2go.dk>
If umlBuildCommandLineChr fails (e.g. due to an unsupported chardev
type), it returns NULL. umlBuildCommandLine does not check for this and
sets this as an argument on the comand line, effectively ending the
argument list. This patch checks for this case and sets the chardev to
"none".
Signed-off-by: Soren Hansen <soren@linux2go.dk>
When sniffing the network traffic, discard class D and E IP addresses when sniffing traffic. This was a reason why filters were not correctly rebuilt on VMs on the local 192.* network when libvirt was restarted and those VMs did not use a DHCP request to get its IP address.
While testing the SIGHUP handling and reloading of the nwfilter driver, I found that when the filters are rebuilt and mutlipe threads handled the individual interfaces, concurrently running multiple external bash scripts causes strange failures even though the executed ebtables commands are working on different tables for different interfaces. I cannot say for sure where the concurrency problems are caused, but introducing this lock definitely helps.
Since the qemu process is running as qemu:qemu, it can't actually
look at the unix socket in /var/run/libvirt/qemu which is owned by
root and has permission 700. Move the unix socket to
/var/lib/libvirt/qemu, which is already owned by qemu:qemu.
Thanks to Justin Clift for test this out for me.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The problem is that on the source of the migration, libvirtd
is responsible for creating the unix socket over which the data
will flow. Since libvirtd is running as root, this file will
be created as root. When the qemu process running as qemu:qemu
goes to access the unix file to write data to it, it will get
permission denied and fail. Make sure to change the owner
of the unix file to qemu:qemu.
Thanks to Justin Clift for testing this patch out for me.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
This patch fixes a couple of complaints from valgrind when tickling libvirtd with SIGHUP.
The first two files contain fixes for memory leaks. The 3rd one initializes an uninitialized variable. The 4th one is another memory leak.
Basically a followup of the previous patch about balloon desactivation
if desactivated, to not ask for balloon information to qemu as we will
just get an error back.
This can make a huge difference in the time needed for domain
information or list when a machine is loaded, and balloon has been
desactivated in the guests.
* src/qemu/qemu_driver.c: do not get the balloon info if the balloon
suppor is disabled
--dhcp-no-override description from dnsmasq man page:
Disable re-use of the DHCP servername and filename fields as
extra option space. If it can, dnsmasq moves the boot server and
filename information (from dhcp-boot) out of their dedicated
fields into DHCP options. This make extra space available in the
DHCP packet for options but can, rarely, confuse old or broken
clients. This flag forces "simple and safe" behaviour to avoid
problems in such a case.
It seems some virtual network card ROMs are this old/buggy so let's add
--dhcp-no-override as a workaround for them. We don't use extra DHCP
options so this should be safe. The option was added in dnsmasq-2.41,
which becomes the minimum required version.
For parsing try to match by datastore mount path first, if that
fails fallback to /vmfs/volumes/<datastore>/<path> parsing. This
also fixes problems with GSX on Windows. Because GSX on Windows
doesn't use /vmfs/volumes/ style file names.
For formatting use the datastore mount path too, instead of using
/vmfs/volumes/<datastore>/<path> as fixed format.
We add --dhcp-lease-max=xxx argument when network->def->nranges > 0 but
we only allocate space for in the opposite case :-) I guess we are lucky
enough to miscount somewhere else so that we actually allocate more
space than we need since no-one has hit this bug so far.
Introduce esxVMX_Context containing functions pointers to
glue both parts together in a generic way.
Move the ESX specific part to esx_driver.c.
This is a step towards making the VMX code reusable in a
potential VMware Workstation and VMware Player driver.
The balloon device is automatically added to qemu guests if supported,
but it may be useful to desactivate it. The simplest to not change the
existing behaviour is to allow
<memballoon type="none"/>
as an extra option to desactivate it (it is automatically added if the
memballoon construct is missing for the domain).
The following simple patch just adds the extra option and does not
change the default behaviour but avoid creating a balloon device if
type="none" is used.
* docs/schemas/domain.rng: add the extra type attribute value
* src/conf/domain_conf.c src/conf/domain_conf.h: add the extra enum
value
* src/qemu/qemu_conf.c: if enum is NONE, don't activate the device,
i.e. don't pass the args to qemu/kvm
Added a more detailed error message when adding a tap devices fails and
the kernel is missing tun support.
Signed-off-by: Doug Goldstein <cardoe@gentoo.org>
Fix the error checking to use the return value from brAddTap() instead
of checking the current errno value which might have been changed by
clean up calls inside of brAddTap().
Signed-off-by: Doug Goldstein <cardoe@gentoo.org>
https://bugzilla.redhat.com/622515 - When hot-unplugging CPUs,
libvirt failed to start a guest that had been pinned to CPUs that
were still online.
Tested on a dual-core laptop, where I also discovered that, per
http://www.cyberciti.biz/files/linux-kernel/Documentation/cpu-hotplug.txt,
/sys/devices/system/cpu/cpu0/online does not exist on systems where it
cannot be hot-unplugged.
* src/nodeinfo.c (linuxNodeInfoCPUPopulate): Ignore CPUs that are
currently offline. Detect readdir failure.
(parse_socket): Move guts...
(get_cpu_value): ...to new function, shared with...
(cpu_online): New function.
device_del command is not synchronous for PCI devices, it merely asks
the guest to release the device and returns. If the host wants to use
that device before the guest actually releases it, we are in big
trouble. To avoid this, we already added a loop which waits up to 10
seconds until the device is actually released before we do anything else
with that device. But we only added this loop for managed PCI devices
before we try reattach them back to the host.
However, we need to wait even for non-managed devices. We don't reattach
them automatically, but we still want to prevent the host from using it.
This was revealed thanks to sVirt: when we relabel sysfs files
corresponding to the PCI device before the guest finished releasing the
device, qemu is no longer allowed to access those files and if it wants
(as a result of guest's request) to write anything to them, it just
exits, which kills the guest.
This is not a proper fix and needs some further work both on libvirt and
qemu side in the future.
virDiskNameToIndex has a list of disk name prefixes that it uses in the
process of finding the disk's index. This list is missing "ubd" which
is the disk prefix used for UML domains.
Signed-off-by: Soren Hansen <soren@linux2go.dk>
That way it can be used to verify a numeric address without storing
the details
* src/util/network.c: change virSocketParseAddr to allow a null @addr
parameter
According to <xen-3.4.3/tools/python/xen/xm/create.py:158>
gopts.var('bootargs', val='NAME',
fn=set_value, default=None,
use="Arguments to pass to boot loader")
the "bootloader_args" parameter needs to be translated into "bootargs"
when using "virsh domxml-to-native xen-xm".
The reverse direction (domxml-from-native) is already okay.
This patch fixes domxml-to-native and adds two test files to catch this
problem.
Signed-off-by: Philipp Hahn <hahn@univention.de>
src/phyp/phyp_driver.c:phypListDomainsGeneric was crashing due to a buffer
overflow if any line returned from virRun wasn't <=10 characters.
Since virStrToLong_i recognizes any non-numeric as a terminator (not
just NULL), there actually is no need to copy the number into a
separate string anyway, so this patch eliminates that copy, the fixed
length buffer, and therefore the potential to overflow.
This change also provided the oppurtunity to eliminate the character
counting loop, instead using the return from virStrToLong_i to point
past the end of the number, then simply skip the \n to get to the
next.
Fix the error checking to use the return value from brAddTap() instead
of checking the current errno value which might have been changed by
clean up calls inside of brAddTap().
Signed-off-by: Doug Goldstein <cardoe@gentoo.org>
Added a more detailed error message when adding a tap devices fails and
the kernel is missing tun support.
Signed-off-by: Doug Goldstein <cardoe@gentoo.org>
the followup on the boot=on problem, basically it's not needed to
specify it when booting out of IDE devices when using KVM
* src/qemu/qemu_conf.c: do not use boot=on for IDE devices
* tests/qemuxml2argvdata/qemuxml2argv*.args: this changes the output
for 5 of the tests
Patch version revamped by Eric Blake <eblake@redhat.com> of Jiri
Denemark <jdenemar@redhat.com> original patch
When attaching a PCI device which doesn't explicitly set its PCI
address, libvirt allocates the address automatically. The problem is
that when checking which PCI address is unused, we only check for those
with slot number higher than the highest slot number ever used.
Thus attaching/detaching such device several times in a row (31 is the
theoretical limit, less then 30 tries are enough in practise) makes any
further device attachment fail. Furthermore, attaching a device with
predefined PCI address to 0:0:31 immediately forbids attachment of any
PCI device without explicit address.
This patch changes the logic so that we always check all PCI addresses
before we say there is no PCI address available.
Modifications from v1: revert back to remembering the last slot
reserved, but allow wraparound to not be limited by the end.
In this way, slots are still assigned in the same order as
before the patch, rather than filling in the gaps closest to
0 and risking making windows guests mad.
* src/qemu/qemu_conf.c: fix pci reservation code to do a round-robbin
check of all available PCI splot availability before failing.
Don't rely on summary.url anymore, because its value is different
between an esx:// and vpx:// connection. Use host.mountInfo.path
instead.
Don't fallback to lookup by UUID (actually lookup by absolute path)
in esxVI_LookupDatastoreByName when lookup by name fails. Add a
seperate function for this: esxVI_LookupDatastoreByAbsolutePath
Now a vpx:// connection has an explicitly specified host. This
allows to enabled several functions for a vpx:// connection
again, like host UUID, hostname, general node info, max vCPU
count, free memory, migration and defining new domains.
Lookup datacenter, compute resource, resource pool and host
system once and cache them. This simplifies the rest of the
code and reduces overall HTTP(S) traffic a bit.
esx:// and vpx:// can be mixed freely for a migration.
Ensure that migration source and destination refer to the
same vCenter. Also directly encode the resource pool and
host system object IDs into the migration URI in the prepare
function. Then directly build managed object references in
the perform function instead of re-looking up already known
information.
This patch attempts to take advantage of a newly added netfilter
module to correct for a problem with some guest DHCP client
implementations when used in conjunction with a DHCP server run on the
host systems with packet checksum offloading enabled.
The problem is that, when the guest uses a RAW socket to read the DHCP
response packets, the checksum hasn't yet been fixed by the IP stack,
so it is incorrect.
The fix implemented here is to add a rule to the POSTROUTING chain of
the mangle table in iptables that fixes up the checksum for packets on
the virtual network's bridge that are destined for the bootpc port (ie
"dhcpc", ie port 68) port on the guest.
Only very new versions of iptables will have this support (it will be
in the next upstream release), so a failure to add this rule only
results in a warning message. The iptables patch is here:
http://patchwork.ozlabs.org/patch/58525/
A corresponding kernel module patch is also required (the backend of
the iptables patch) and that will be in the next release of the
kernel.
When trying to assign a PCI device to a guest, we have
to check that all bridges upstream of that device support
ACS. That means that we have to find the parent bridge of
the current device, check for ACS, then find the parent bridge
of that device, check for ACS, etc. As it currently stands,
the code to do this iterates through all PCI devices on the
system, looking for a device that has a range of busses that
included the current device's bus.
That check is not restrictive enough, though. Depending on
how we iterated through the list of PCI devices, we could first
find the *topmost* bridge in the system; since it necessarily had
a range of busses including the current device's bus, we
would only ever check the topmost bridge, and not check
any of the intermediate bridges.
Note that this also caused a fairly serious bug in the
secondary bus reset code, where we could erroneously
find and reset the topmost bus instead of the inner bus.
This patch changes pciGetParentDevice() so that it first
checks if a bridge device's secondary bus exactly matches
the bus of the device we are looking for. If it does, we've
found the correct parent bridge and we are done. If it does not,
then we check to see if this bridge device's busses *include* the
bus of the device we care about. If so, we mark this bridge device
as best, and go on. If we later find another bridge device whose
busses include this device, but is more restrictive, then we
free up the previous best and mark the new one as best. This
algorithm ensures that in the normal case we find the direct
parent, but in the case that the parent bridge secondary bus
is not exactly the same as the device, we still find the
correct bridge.
This patch was tested by me on a 4-port NIC with a
bridge without ACS (where assignment failed), a 4-port
NIC with a bridge with ACS (where assignment succeeded),
and a 2-port NIC with no bridges (where assignment
succeeded).
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When parsing hostdev, the following message would be emitted:
10:17:19.052: error : virDomainHostdevDefParseXML:3748 : internal error unknown node alias
However, alias is appropriately parsed in
virDomainDeviceInfoParseXML anyway. Disable the error message
in the initial XML parsing loop.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When an openvz domain is defined with virDomainDefineXML,
domain id is set to -1. A call to virDomainGetInfo after
starting the domain would then fail because this invalid
id is passed to openvzGetProcessInfo.
Found by clang. Clang complained that virStorageBackendProbeTarget
could dereference NULL if backingStoreFormat was NULL, but since all
callers passed a valid pointer, I added attributes instead of null
checks.
* src/storage/storage_backend.c
(virStorageBackendQEMUImgBackingFormat): Kill dead store.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise. Skip null checks, by adding attributes.
valgrind was complaining that virUUIDParse was depending on
an uninitialized value. Indeed it was; virSetHostUUIDStr()
didn't initialize the dmiuuid buffer to 0's, meaning that
anything after the string read from /sys was uninitialized.
Clear out the dmiuuid buffer before use, and make sure to
always leave a \0 at the end.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Basically the 'boot=on' boot selection device is something present in
KVM but not in upstream QEmu, as a result if we boot a QEmu domain
without KVM acceleration we must disable boot=on ... even if the front
end kvm binary expose that capability in the help page.
* src/qemu/qemu_conf.c: in qemudBuildCommandLine if -no-kvm
is passed, then deactivate QEMUD_CMD_FLAG_DRIVE_BOOT
ADD_ARG_LIT should only be used for literal arguments,
since it duplicates the memory. Since virBufferContentAndReset
is already allocating memory, we should only use ADD_ARG.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
esxVI_WaitForTaskCompletion can take a UUID to lookup the
corresponding domain and check if the current task for it
is blocked by a question. It calls another function to do
this: esxVI_LookupAndHandleVirtualMachineQuestion looks up
the VirtualMachine and checks for a question. If there is
a question it calls esxVI_HandleVirtualMachineQuestion to
handle it.
If there was no question or it has been answered the call
to esxVI_LookupAndHandleVirtualMachineQuestion returns 0.
If any error occurred during the lookup and answering
process -1 is returned. The problem with this is, that -1
is also returned when there was no error but the question
could not be answered. So esxVI_WaitForTaskCompletion cannot
distinguish between this two situations and reports that a
question is blocking the task even when there was actually
another problem.
This inherent problem didn't surface until vSphere 4.1 when
you try to define a new domain. The driver tries to lookup
the domain that is just in the process of being registered.
There seems to be some kind of race condition and the driver
manages to issue a lookup command before the ESX server was
able to register the domain. This used to work before.
Due to the return value problem described above the driver
reported a false error message in that case.
To solve this esxVI_WaitForTaskCompletion now takes an
additional occurrence parameter that describes whether or
not to expect the domain to be existent. Also add a new
parameter to esxVI_LookupAndHandleVirtualMachineQuestion
that allows to distinguish if the call returned -1 because
of an actual error or because the question could not be
answered.
'./autobuild.sh' with lcov installed discovered that our
coverage support has been bit-rotting for a while. This
restores it back to a successful state, although I have
not yet spent any time looking through the resulting files to
look for low-hanging fruit in the unit test coverage front.
* configure.ac: Clear COMPILER_FLAGS at right place.
* Makefile.am (cov): Newer genhtml no longer likes plain -s.
* m4/compiler-flags.m4 (gl_COMPILER_FLAGS): Don't AC_SUBST
COMPILER_FLAGS; it is a shell variable for use in configure only.
* src/Makefile.am (AM_CFLAGS, AM_LDFLAGS): New variables, to make
it easier to provide global flag additions. Use throughout, to
uniformly apply coverage flags.
* .gitignore: Globally ignore gcov output.
* daemon/.gitignore: Simplify.
* src/.gitignore: Likewise.
* tests/.gitignore: Likewise.
The recent switch to enable -Wlogical-op paid off again.
gcc 4.5.0 (rawhide) is smarter than 4.4.4 (Fedora 13).
* src/xen/xend_internal.c (xenDaemonAttachDeviceFlags)
(xenDaemonUpdateDeviceFlags, xenDaemonDetachDeviceFlags): Use
correct operator.
Signed-off-by: Eric Blake <eblake@redhat.com>
src/lxc/veth.c:150: VIR_DEBUG(_("Failed to delete '%s' (%d)"),
src/lxc/veth.c:188: VIR_DEBUG(_("Failed to disable '%s' (%d)"),
maint.mk: do not mark these strings for translation
* src/lxc/veth.c (vethDelete, vethInterfaceUpOrDown): Don't
translate VIR_DEBUG.
Previously, the functions in src/lxc/veth.c could sometimes return
positive values on failure rather than -1. This made accurate error
reporting difficult, and led to one failure to catch an error in a
calling function.
This patch makes all the functions in veth.c consistently return 0 on
success, and -1 on failure. It also fixes up the callers to the veth.c
functions where necessary.
Note that this patch may be related to the bug:
https://bugzilla.redhat.com/show_bug.cgi?id=607496.
It will not fix the bug, but should unveil what happens.
* po/POTFILES.in - add veth.c, which previously had no translatable strings
* src/lxc/lxc_controller.c
* src/lxc/lxc_container.c
* src/lxc/lxc_driver.c - fixup callers to veth.c, and remove error logs,
as they are now done in veth.c
* src/lxc/veth.c - make all functions consistently return -1 on error.
* src/lxc/veth.h - use ATTRIBUTE_NONNULL to protect against NULL args.
This fixes a leak described in
https://bugzilla.redhat.com/show_bug.cgi?id=590073
xenUnifiedDomainInfoList has a pointer to a list of pointers to
xenUnifiedDomain. We were freeing up all the domains, but neglecting
to free the list.
This was found by Paolo Bonzini <pbonzini@redhat.com>.
If detecting the FLR flag of a pci device fails, then we
could run into the situation of trying to close a file
descriptor twice, once in pciInitDevice() and once in pciFreeDevice().
Fix that by removing the pciCloseConfig() in pciInitDevice() and
just letting pciFreeDevice() handle it.
Thanks to Chris Wright for pointing out this problem.
While we are at it, fix an error check. While it would actually
work as-is (since success returns 0), it's still more clear to
check for < 0 (as the rest of the code does).
Signed-off-by: Chris Lalancette <clalance@redhat.com>
All <console> devices now export a <target> type attribute. QEMU defaults
to 'serial', UML defaults to 'uml, xen can be either 'serial' or 'xen'
depending on fullvirt. Understandably there is lots of test fallout.
This will be used to differentiate between a serial vs. virtio console for
QEMU.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
targetType only tracks the actual <target> format we are parsing. Currently
we only fill abide this value for channel devices.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
There is actually a difference between the character device type (serial,
parallel, channel, ...) and the target type (virtio, guestfwd). Currently
they are awkwardly conflated.
Start to pull them apart by renaming targetType -> deviceType. This is
an entirely mechanical change.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
During function test of the 802.1Qbg implementation in lldpad we came
across a small problem in the handling of the netlink message
corresponding to PORT_PROFILE_RESPONSE_INPROGRESS. This should not
result in returning the default rc=1.
- src/util/macvtap.c: fix getPortProfileStatus() to return 0 in that
case and also fix an indentation problem
QEMU has had two different syntax for disk cache options
Old: on|off
New: writeback|writethrough|none
QEMU recently added another 'unsafe' option which broke the
libvirt check. We can avoid this & future breakage, if we
do a negative check for the old syntax, instead of a positive
check for the new syntax
* src/qemu/qemu_conf.c: Invert cache option check
Add a new element to the <os> block:
<bootmenu enable="yes|no"/>
Which maps to -boot,menu=on|off on the QEMU command line.
I decided to use an explicit 'enable' attribute rather than just make the
bootmenu element boolean. This allows us to treat lack of a bootmenu element
as 'use hypervisor default'.
Some buggy PCI devices actually support FLR, but
forget to advertise that fact in their PCI config space.
However, Virtual Functions on SR-IOV devices are
*required* to support FLR by the spec, so force has_flr
on if this is a virtual function.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When doing a PCI secondary bus reset, we must be sure that there are no
active devices on the same bus segment. The active device tracking is
designed to only track host devices that are active in use by guests.
This ignores host devices that are actively in use by the host. So the
current logic will reset host devices.
Switch this logic around and allow sbus reset when we are assigning all
devices behind a bridge to the same guest at guest startup or as a result
of a single attach-device command.
* src/util/pci.h: change signature of pciResetDevice to add an
inactive devices list
* src/qemu/qemu_driver.c src/xen/xen_driver.c: use (or not) the new
functionality of pciResetDevice() depending on the place of use
* src/util/pci.c: implement the interface and logic changes
- src/qemu/qemu_driver.c: Eliminate code duplication by using the new
helpers qemuPrepareHostdevPCIDevices and qemuDomainReAttachHostdevDevices.
This reduces the number of open coded calls to pciResetDevice.
- src/qemu/qemu_driver.c: These new helpers take hostdev list and count
directly rather than getting them indirectly from domain definition.
This will allow reuse for the attach-device case.
- src/qemu/qemu_driver.c: Update qemuGetPciHostDeviceList to take a
hostdev list and count directly, rather than getting this indirectly
from domain definition. This will allow reuse for the attach-device case.
Add a pointer to the primary context of a connection and use it in all
driver functions that don't dependent on the context type. This includes
almost all functions that deal with a virDomianPtr. Therefore, using
a vpx:// connection allows you to perform all the usual domain related
actions like start, destroy, suspend, resume, dumpxml etc.
Some functions that require an explicitly specified ESX server don't work
yet. This includes the host UUID, the hostname, the general node info, the
max vCPU count and the free memory. Also not working yet are migration and
defining new domains.
Since 070f61002f the vcenter query
parameter has been ignored, because the refactoring to use
esxUtil_ParseQuery was incomplete. This effectively broke migration,
because the vcenter query parameter is essential for a migration.
Commit 68719c4bdd added the
p option to control disk format probing, but it wasn't added
to the getopt_long optstring parameter.
Add the p option to the getopt_long optstring parameter.
Commit a885334499 added this
function and wrapped vah_add_file in it. vah_add_file may
return -1, 0, 1. It returns 1 in case the call to valid_path
detects a restricted file. The original code treated a return
value != 0 as error. The refactored code treats a return
value < 0 as error. This triggers segfault in virt-aa-helper
and breaks virt-aa-helper-test for the restricted file tests.
Make sure that add_file_path returns -1 on error.
virt-aa-helper used to ignore errors when opening files.
Commit a885334499 refactored
the related code and changed this behavior. virt-aa-helper
didn't ignore open errors anymore and virt-aa-helper-test
fails.
Make sure that virt-aa-helper ignores open errors again.
Thanks to DV for knocking together the Relax-NG changes
quickly for me.
Changes since v1:
- Change the domain.rng to correspond to the new schema
- Don't allocate caps->ns in testQemuCapsInit since it is a static table
Changes since v2:
- Change domain.rng to add restrictions on allowed environment names
Changes since v3:
- Remove a bogus comment in the tests
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Since we are adding a new "per-hypervisor" protocol, we
make it so that the qemu remote protocol uses a new
PROTOCOL and PROGRAM number. This allows us to easily
distinguish it from the normal REMOTE protocol.
This necessitates changing the proc in remote_message_header
from a "remote_procedure" to an "unsigned", which should
be the same size (and thus preserve the on-wire protocol).
Changes since v1:
- Fixed up a couple of script problems in remote_generate_stubs.pl
- Switch an int flag to a bool in dispatch.c
Changes since v2:
- None
Changes since v3:
- Change unsigned proc to signed proc, to conform to spec
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Implement the qemu driver's virDomainQemuMonitorCommand
and hook it into the API entry point.
Changes since v1:
- Rename the (external) qemuMonitorCommand to qemuDomainMonitorCommand
- Add virCheckFlags to qemuDomainMonitorCommand
Changes since v2:
- Drop ATTRIBUTE_UNUSED from the flags
Changes since v3:
- Add a flag to priv so we only print out monitor command warning once. Note
that this has not been plumbed into qemuDomainObjPrivateXMLFormat or
qemuDomainObjPrivateXMLParse, which means that if you run a monitor command,
restart libvirtd, and then run another monitor command, you may get an
an erroneous VIR_INFO. It's a pretty minor matter, and I didn't think it
warranted the additional code.
- Add BeginJob/EndJob calls around EnterMonitor/ExitMonitor
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Add the library entry point for the new virDomainQemuMonitorCommand()
entry point. Because this is not part of the "normal" libvirt API,
it gets its own header file, library file, and will eventually
get its own over-the-wire protocol later in the series.
Changes since v1:
- Go back to using the virDriver table for qemuDomainMonitorCommand, due to
linking issues
- Added versioning information to the libvirt-qemu.so
Changes since v2:
- None
Changes since v3:
- Add LGPL header to libvirt-qemu.c
- Make virLibConnError and virLibDomainError macros instead of function calls
Changes since v4:
- Move exported symbols to libvirt_qemu.syms
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Now that we have the ability to specify arbitrary qemu
command-line parameters in the XML, use it to handle unknown
command-line parameters when doing a native-to-xml conversion.
Changes since v1:
- Rename num_extra to num_args
- Fix up a memory leak on an error path
Changes since v2:
- Add a VIR_WARN when adding the argument via qemu:arg
Changes since v3:
- None
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Implement the qemu hooks for XML namespace data. This
allows us to specify a qemu XML namespace, and then
specify:
<qemu:commandline>
<qemu:arg value='arg'/>
<qemu:env name='name' value='value'/>
</qemu:commandline>
In the domain XML.
Changes since v1:
- Change the <qemu:arg>arg</qemu:arg> XML to <qemu:arg value='arg'/> XML
- Fix up some memory leaks in qemuDomainDefNamespaceParse
- Rename num_extra and extra to num_args and args, respectively
- Fixed up some error messages
- Make sure to escape user-provided data in qemuDomainDefNamespaceFormatXML
Changes since v2:
- Add checking to ensure environment variable names are valid
- Invert the logic in qemuDomainDefNamespaceFormatXML to return early
Changes since v3:
- Change strspn() to c_isalpha() check of first letter of environment variable
Signed-off-by: Chris Lalancette <clalance@redhat.com>
This patch adds namespace XML parsers to be hooked into
the main domain parser. This allows for individual hypervisor
drivers to add per-namespace XML into the main domain XML.
Changes since v1:
- Use a statically declared table for caps->ns, removing the need to
allocate/free it.
Changes since v2:
- None
Changes since v3:
- None
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The first conditional is always true which means the iterator will
never find another device on the same bus.
if (dev->domain != check->domain ||
dev->bus != check->bus ||
----> (check->slot == check->slot &&
check->function == check->function)) <-----
The goal of that check is to verify that the device is either:
in a different pci domain
on a different bus
is the same identical device
This means libvirt may issue a secondary bus reset when there are
devices
on that bus that actively in use by the host or another guest.
* src/util/pci.c: fix a bogus test in pciSharesBusWithActive()
The remote driver is using the wrong privateData field in
a couple of functions. THis is harmless for stateful
drivers like QEMU/UML/LXC, but will crash with Xen
* src/remote/remote_driver.c: Fix use of privateData field
A Linux software bridge will assume the MAC address of the enslaved
interface with the numerically lowest MAC addr. When the bridge
changes MAC address there is a period of network blackout, so a
change should be avoided. The kernel gives TAP devices a completely
random MAC address. Occassionally the random TAP device MAC is lower
than that of the physical interface (eth0, eth1etc) that is enslaved,
causing the bridge to change its MAC.
This change sets an explicit MAC address for all TAP devices created
using the configured MAC from the XML, but with the high byte set
to 0xFE. This should ensure TAP device MACs are higher than any
physical interface MAC.
* src/qemu/qemu_conf.c, src/uml/uml_conf.c: Pass in a MAC addr
for the TAP device with high byte set to 0xFE
* src/util/bridge.c, src/util/bridge.h: Set a MAC when creating
the TAP device to override random MAC
The PCI slot 1 must be reserved at all times, since PIIX3 is
always present, even if no IDE device is in use for guest disks
* src/qemu/qemu_conf.c: Always reserve slot 1 for PIIX3
Init process may remain after sending SIGTERM for some reason.
For example, if original init program is used, it is definitely
not killed by SIGTERM.
* src/lxc/lxc_controller.c: kill with SIGKILL if SIGTERM wasn't
sufficient
One error exit in virStorageBackendCreateBlockFrom was setting the
return value to errno. The convention for volume build functions is to
return 0 on success or -1 on failure. Not only was it not necessary to
set the return value (it defaults to -1, and is set to 0 when
everything has been successfully completed), in the case that some
caller were checking for < 0 rather than != 0, they would incorrectly
believe that it completed successfully.
virDirCreate also previously returned 0 on success and errno on
failure. This makes it fit the recommended convention of returning 0
on success, -errno (ie a negative number) on failure.
Previously virStorageBackendCopyToFD would simply return -1 on
error. This made the error return from one of its callers inconsistent
(createRawFileOpHook is supposed to return -errno, but if
virStorageBackendCopyToFD failed, createRawFileOpHook would just
return -1). Since there is a useful errno in every case of error
return from virStorageBackendCopyToFD, and since the other uses of
that function ignore the return code (beyond simply checking to see if
it is < 0), this is a safe change.
virFileOperation previously returned 0 on success, or the value of
errno on failure. Although there are other functions in libvirt that
use this convention, the preferred (and more common) convention is to
return 0 on success and -errno (or simply -1 in some cases) on
failure. This way the check for failure is always (ret < 0).
* src/util/util.c - change virFileOperation and virFileOperationNoFork to
return -errno on failure.
* src/storage/storage_backend.c, src/qemu/qemu_driver.c
- change the hook functions passed to virFileOperation to return
-errno on failure.
To try and ensure that people upgrading from old QEMU get guests
with the same PCI device ordering, change the way we assign addrs
to match QEMU's default order. This should make Windows less
annoyed.
* src/qemu/qemu_conf.c: Follow QEMU's default PCI ordering
logic when assigning addresses
* tests/*.args: Update for changed PCI addresses
To allow compatibility with older QEMU PCI device slot assignment
it is necessary to explicitly track the balloon device in the
XML. This introduces a new device
<memballoon model='virtio|xen'/>
It can also have a PCI address, auto-assigned if necessary.
The memballoon will be automatically added to all Xen and QEMU
guests by default.
* docs/schemas/domain.rng: Add <memballoon> element
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing
and formatting for memballoon device. Always add a memory
balloon device to Xen/QEMU if none exists in XML
* src/libvirt_private.syms: Export memballoon model APIs
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Honour the
PCI device address in memory balloon device
* tests/*: Update to test new functionality
