There are two ways for specifying loader:nvram pairs:
1) --with-loader-nvram configure option
2) nvram variable in qemu.conf
Since we have FW descriptors, using this old style is
discouraged, but not as strong as one would expect. Produce more
warnings:
1) produce a warning if somebody tries the configure option
2) produce a warning if somebody sets nvram variable and at
least on FW descriptor was found
The reason for producing warning in case 1) is that package
maintainers, who set the configure option in the first place
should start moving towards FW descriptors and abandon the
configure option. After all, the warning is printed into config
output only in this case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1763477
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit d19c21429f modified the condition so that it checks whether the
value is more than 0xFFFFFFFF. Since addr->domain is an unsigned int, it
will never be more than that.
Remove the whole check
src/util/virpci.c:1291:22: error: result of comparison 'unsigned int' > 4294967295 is always false [-Werror,-Wtautological-type-limit-compare]
if (addr->domain > 0xFFFFFFFF) {
~~~~~~~~~~~~ ^ ~~~~~~~~~~
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since 6a077cf2b3 domaincapstest does not run through all cases on
failure but terminates right away. This makes it super annoying to debug
or use in combination with VIR_TEST_REGENERATE_OUTPUT.
Fix it by remembering failure and still running through all cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When RUNSTATEDIR was introduced
commit d29c917ef4
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Tue Aug 20 16:05:12 2019 +0100
src: honour the RUNSTATEDIR variable in all code
The makefile rules for man pages were accidentally not updated for the
new variablle name.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Simplify the list of ignored warnings now that we only have two left,
and document why we're not honouring them.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Line continuations should be 4 space indented unless a previous opening
brace required different alignment.
docs/apibuild.py:2014:24: E126 continuation line over-indented for hanging indent
token[0], token[1]))
^
docs/apibuild.py:74:3: E121 continuation line under-indented for hanging indent
"ATTRIBUTE_UNUSED": (0, "macro keyword"),
^
...more...
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There should be a single space either side of operators. Inline
comments should have two spaces before the '#'
src/hyperv/hyperv_wmi_generator.py:130:45: E261 at least two spaces before inline comment
source += ' { "", "", 0 },\n' # null terminated
^
src/esx/esx_vi_generator.py:417:25: E221 multiple spaces before operator
FEATURE__DESERIALIZE = (1 << 6)
^
tests/cputestdata/cpu-cpuid.py:187:78: E225 missing whitespace around operator
f.write(" <msr index='0x%x' edx='0x%08x' eax='0x%08x'/>\n" %(
^
docs/apibuild.py:524:47: E226 missing whitespace around arithmetic operator
self.line = line[i+2:]
^
...more...
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Coding style expects 1 blank line between each method and 2 blank lines
before each class.
docs/apibuild.py:171:5: E303 too many blank lines (2)
def set_header(self, header):
^
docs/apibuild.py:230:1: E302 expected 2 blank lines, found 1
class index:
^
docs/apibuild.py:175:5: E301 expected 1 blank line, found 0
def set_module(self, module):
^
...more...
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Exception catching statements should always match on a class name, the
most specific one possible. Rather than analyse the code to look at what
the most specific one is, this just uses the base Exception class.
docs/apibuild.py:255:9: E722 do not use bare 'except'
except:
^
docs/apibuild.py:279:9: E722 do not use bare 'except'
except:
^
...more...
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Python code style recommends avoiding a variable named 'l' as it is
visually similar to '1'.
docs/apibuild.py:482:13: E741 ambiguous variable name 'l'
l = len(line)
^
docs/apibuild.py:503:21: E741 ambiguous variable name 'l'
l = len(line)
^
...more...
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When writing regexes special regex matches like "\d" can get
misinterpreted as normal string escape sequences:
docs/apibuild.py:1359:51: W605 invalid escape sequence '\d'
value = value + re.sub("^(\d+)U$", "\\1", token[1])
^
docs/apibuild.py:2134:31: W605 invalid escape sequence '\('
m = re.match("\(?1<<(\d+)\)?", info[0])
^
docs/apibuild.py:2134:38: W605 invalid escape sequence '\d'
m = re.match("\(?1<<(\d+)\)?", info[0])
^
docs/apibuild.py:2134:42: W605 invalid escape sequence '\)'
m = re.match("\(?1<<(\d+)\)?", info[0])
^
To avoid this probem all regexes should use the r"...." syntax for their
strings, which disables normal string escape sequences.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current flake8 check only looks at one item (semicolons at end of
line). This means that our code quality will continue to get worse,
violating an increasing number of checks.
Switching to a whitelist means that we freeze the badness at its
current level & can incrementally fix things up.
We are excluding the following...
Indentation:
E114 indentation is not a multiple of four (comment)
E115 expected an indented block (comment)
E116 unexpected indentation (comment)
E121 continuation line under-indented for hanging indent
E125 continuation line with same indent as next logical line
E126 continuation line over-indented for hanging indent
E127 continuation line over-indented for visual indent
E128 continuation line under-indented for visual indent
E129 visually indented line with same indent as next logical line
E131 continuation line unaligned for hanging indent
Whitespace:
E211 whitespace before ‘(‘
E221 multiple spaces before operator
E222 multiple spaces after operator
E225 missing whitespace around operator
E226 missing whitespace around arithmetic operator
E231 missing whitespace after ‘,’, ‘;’, or ‘:’
E261 at least two spaces before inline comment
Blank lines
E301 expected 1 blank line, found 0
E302 expected 2 blank lines, found 0
E303 too many blank lines (3)
E305 expected 2 blank lines after end of function or class
Line length
E501 line too long (82 > 79 characters)
Statements
E722 do not use bare except, specify exception instead
E741 do not use variables named ‘l’, ‘O’, or ‘I’
Errors:
F821 undefined name 'name'
Warnings:
W504 line break after binary operator
W605 invalid escape sequence ‘x’
Later commits will enable most of these exclusions.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In commit 0985a9597b we stopped
distributing generated source file. This is done by prepending
binary_SOURCES variable with "nodist_". However, there is a typo
- the prefix is "nodst_" instead of "nodist_".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit <b98f90cf913965243c6e2c49a52aa170a48093ef> forgot to update
bhyve and vz Makefile files as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This affects more than src/Makefile.am as the rule to generate source
files for protocols is generic for all sub-directories.
Affected files are:
src/admin/admin_protocol.{h,c}
src/locking/lock_protocol.{h,c}
src/logging/log_protocol.{h,c}
src/lxc/lxc_monitor_protocol.{h,c}
src/remote/{lxc,qemu,remote}_protocol.{h,c}
src/rpc/{virkeepalive,virnet}protocol.{h,c}
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Our naming was not consistent. Use the protocol name as prefix for all
generated files.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There was no need to handle files for translation from build directory
but that will change with following patches where we will stop
generating source files into source directory.
In order to have them included for translation we have to prefix each
file with SRCDIR or BUILDDIR.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Historically we did not support VPATH builds and everything was
generated into source directory. The introduction of VPATH builds
did not changed the way how our translation files are handled.
This patch changes the rules to generate everything into build
directory and stops distributing generated files in order to have
properly separated VPATH builds.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Move generated_files variable closer to the sc_po_check rule and
remove non-existent gnulib internal path.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce new rule 'generated-sources' as a helper for PO files check
to make sure that all generated files are prepared and to not duplicate
the list on different places. This will be used as a dependency for
sc_po_check rule instead of duplicated list of generated files.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit <22d8e27ccd5faf48ee2bf288a1b9059aa7ffd28b> introduced our
syntax-check.mk file based on gnulib rules. However, the rule was
completely ignored as we don't have POTFILES.in file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we forbid builds in source directory we can remove a lot of
ignores that are created during build time. To make the cleanup easier
in the future create a sections in our .gitignore file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Historically we've allowed builds in the main src dir, but meson does
not support this. Explicitly force separate build dir in autotools to
align with meson. We must re-enable dependency tracking which the RPM
%configure macro turns off. Without this, the build dir doesn't get
the source directory tree mirrored.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The qemuDomainGetStatsIOThread() accesses the monitor by calling
qemuDomainGetIOThreadsMon(). And it's also marked as "need
monitor" in qemuDomainGetStatsWorkers[]. However, it's not
checking if acquiring job was successful.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The qemuDomainObjEnterMonitor() should not be called without a
job set. Catch this error and produce a warning message if such
call occurred.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Libvirtd has set SIGPIPE to ignored, and virFork resets all signal
handlers to the defaults. But child process may write logs to
stderr/stdout, that may generate SIGPIPE if journald has stopped.
So set SIGPIPE to a dummy no-op handler before unmask signals in
virFork(), and the handler will get reset to SIG_DFL when execve()
runs. Now we can delete sigaction() call entirely in virExec().
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
When libvirt first implemented a stable and configurable MAC address
for the bridges created for libvirt virtual networks (commit
5754dbd56d, in libvirt v0.8.8) most distro stable releases didn't
support explicitly setting the MAC address of a bridge; the bridge
just always assumed the lowest numbered MAC of all attached
interfaces. Because of this, we stabilized the bridge MAC address by
creating a "dummy" tap interface with a MAC address guaranteed to be
lower than any of the guest tap devices' MACs (which all started with
0xFE, so it's not difficult to do) and attached it to the bridge -
this was the inception of the "virbr0-nic" device that has confused so
many people over the years.
Even though the linux kernel had recently gained support for
explicitly setting a bridge MAC, we deemed it unnecessary to set the
MAC that way, because the other (indirect) method worked everywhere.
But recently there have been reports that the bridge MAC address was
not following the setting in the network config, and mismatched the
MAC of the dummy tap device (which was still correct). It turns out
that this is due to a change in systemd-242 that persists whatever MAC
address is set for a bridge when it's initially started. According to
the systemd NEWS file entry for version 242
(https://github.com/systemd/systemd/blob/master/NEWS):
"if a bridge interface is created without any slaves, and gains
a slave later, then now the bridge does not inherit slave's MAC."
This change was the result of:
https://github.com/systemd/systemd/issues/3374
(apparently if there is no MAC saved for a bridge by the name of a
bridge being created, the random MAC generated during creation is
saved, and then that same MAC is used to explicitly set the MAC each
time it is created). Once a bridge has an explicitly set MAC, the "use
the lowest numbered MAC of attached devices" rule is ignored, so our
dummy tap device is like the goggles - it does nothing! (well, almost).
We could whine about changes in default behavior, etc. etc., but
because the change was in response to actual user problems, that seems
likely a fruitless task. Fortunately, time has marched on, and even
distro releases that are old enough that they are no longer supported
by upstream libvirt (e.g. RHEL6) have support for explicitly setting a
bridge device MAC address, either during creation or with a separate
ioctl after creation, so we can now do that.
To enable explicitly setting the mac during bridge creation, we add a
mac arg to virNetDevBridgeCreate(). In the case of platforms where
the bridge is created with a netlink RTM_NEWLINK message, we just add
that mac to the message. For platforms that still use an ioctl (either
SIOCBRADDBR or SIOCIFCREATE2), we make a separate call to
virNetDevSetMAC() after creating the bridge.
(NB: I was unable to test the calling of virNetDevSetMAC() from the
SIOCIFCREATE2 (BSD) version of virNetDevBridgeCreate(); even though I
managed to get a FreeBSD system setup and libvirt built there, when I
tried to start the default network the SIOCIFCREATE2 ioctl itself
failed, so it never even got to the virNetDevSetMAC(). That leaves the
FreeBSD implementation untested.)
This makes the dummy tap pointless for purposes of setting the MAC
address, but it is still useful for IPv6 DAD initialization (which
apparently requires at least one interface to be attached to the
bridge and online), as well as for setting an initial MTU for the
bridge, so it hasn't been removed.
(NB: we can safely *always* call virNetDevBridgeCreate() with
&def->mac from the network driver because, in spite of the existence
of a "mac_specified" bool in the config suggesting that it may not
always be present, in reality a mac address will always be added to
any network that doesn't have one - this is guaranteed in all cases by
commit a47ae7c004)
https://bugzilla.redhat.com/show_bug.cgi?id=1760851
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Although until now, any use of the extra_args argument (a pointer to a
struct containing extra attributes to add the the RTM_NEWLINK message)
would always have the ifindex and mac set, so the code could assume it
was safe to add both to the message if extra_args != NULL. There is
now a use for setting a MAC address in the RTM_NEWLINK without setting
the ifindex, so we should check each of these separately.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The file was introduced in be03587a34, but it was not added
to $(cpumap_DATA) at the time and so it didn't show up in the
distribution archive.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Commit 01ca4010d8 (libvirt v5.1.0) moved address reservation for
hotplugged interface devices up to an earlier point in
qemuDomainAttachNetDevice(), because that function calls
qemuDomainSupportsNicdev() (in the case of
VIR_DOMAIN_NET_TYPE_VHOSTUSER), and qemuDomainSupportsNicdev() needs
to know the address type (for ARM machinetypes) and returns incorrect
results when the address type is "none".
This bugfix unfortunately caused a regression, because it also made PCI
address reservation happen before we noticed that the device was a
*hostdev* interface. Those interfaces are hotplugged by just calling
out to qemuDomainAttachHostdevDevice() - that function would then also
attempt to reserve the *same PCI address* that had just been reserved
in qemuDomainAttachNetDevice().
The solution is to move the bit of code that short-circuits out to
virDomainHostdevAttach() up *even earlier* so that no PCI address has
been allocated by the time it's called.
https://bugzilla.redhat.com/show_bug.cgi?id=1744523
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This introduces semantic validation for SVE-related features,
preventing the user from combining them in invalid ways; it also
automatically enables overall SVE support if any SVE vector
length has been enabled by the user to make sure QEMU behaves
correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now we only perform very basic validation, such as making sure
that the user is not trying to enable/disable unknown CPU features
and the like.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The only feature we care about for the moment is SVE, which can
be controlled both with a coarse granularity by turning it on/off
completely and with a finer granularity by enabling/disabling
individual vector lengths.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
