schemas are used for more than just documentation,
virsh edit fails if schemas are not available.
Therefore, fix the no-docs build by moving schemas/
to the parsing code inside src/conf/.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In case we are snapshotting at least one 'manual' disk we will pause the
VM and keep it paused.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1866400
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The idea of the manual mode is to allow a synchronized snapshot in cases
when the storage is outsourced to an unmanaged storage provider which
requires cooperation with snapshotting.
The mode will instruct the hypervisor to pause along when the other
components are snapshotted and the 'manual' disk can be snapshotted
along. This increases latency of the snapshot but allows them in
otherwise impossible situations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code parsing thue query-cpu-definitions response will short-circuit
the for loop in the case where usable=yes, resulting in us failing to
parse the CPU deprecation flag.
IOW, we only reported deprecations in domain capabilities for CPU models
which were not runnable on the host.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the not so distant past, the lock ordering in
virNWFilterLockIface() was as follows: global mutex ifaceMapLock
was acquired, then internal representation of given interface was
looked up in a hash table (or created brand new if none was
found), the global lock was released and the lock of the
interface was acquired.
But this was mistakenly changed as the function was rewritten to
use automatic mutexes, because now the global lock is held
throughout the whole run of the function and thus the interface
specific lock is acquired with the global lock held. This results
in a deadlock.
Fixes: dd8150c48d
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The qemuProcessQMPStop() function is intended to kill this dummy
QEMU process we started only for querying capabilities.
Nevertheless, it may be not plain QEMU binary we executed, but
in fact it may be a memcheck tool (e.g. valgrind) that executes
QEMU later. By switching to virProcessKillPainfully() we allow
this wrapper tool to exit gracefully.
Another up side is that virProcessKillPainfully() reports an
error so no need for us to VIR_ERROR() ourselves.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Right now the jobs have no rules so they will always be created in
a pipeline. If the user's fork has no runner configured, then the
jobs will never be able to execute and the pipeline will not finish.
Even on upstream, there might be times the runner has to be taken
offline for maint work, or unexpectedly fail. We need a quick way
to disable the integration tests if we decide we don't want to
have pipelines queued until the runner comes back online.
Both these problems can be addressed by requiring a environment
variable to be set
LIBVIRT_CI_INTEGRATION=1
This can be done in the GitLab repo CI settings for permanent
enablement. Alternatively it can be set for individual
scheduled jobs, or using a push option
git push -o ci.variable=LIBVIRT_CI_INTEGRATION=1
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Although we split out jobs across many files, the template / job
namespace is global, so we should use something more specific
than '.tests' as the template name.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
While its name would suggest that virNWFilterObj is an actual
virObject it is not. It's a plain structure (with virMutex as its
first member). Therefore, when locking the struct
virObjectLockGuard() can' be used and virLockGuardLock() must be
used instead.
Spotted-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
It does not make sense to have both of these, since one of them
is only a wrapper for the other one. I decided to preserve the
more general one, which requires only virDomainObj and rewrote it
a bit, so that it pulls the qemu driver from privateData.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This allows nwfilterStateCleanupLocked to be used in
nwfilterStateInitialize in a later patch.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This enables a later patch to simplify locking during initialization
and cleanup of virNWFilterDriverState.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virHashTableForEach unhelpfully has payload/key args in
its callback reversed compared to g_hash_table_foreach.
When converting from one to the other the semantics
change but you don't get a compile error
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A wrong reordering caused "priv" to be derefenced before the NULL-check
in esxStreamSend and esxStreamRecvFlags.
Fixes: 12e19f172d
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This stage will download build artifacts from both the libvirt and
libvirt-perl (multi-project CI) builds, install all them on the custom
runners and configures libvirt debug logging on the runners prior to
executing the actual test suite. In case of a failure, libvirt and
Avocado logs will be saved and published as pipeline artifacts.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We're already building libvirt in the containers already, if we publish
the build in form of, say, RPMs, later stages of the pipeline can
consume the RPMs instead of re-building libvirt from scratch.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This makes it possible to reduce the number of cases we have to
consider, because 'sles' declares itself to be like 'suse' and
both 'rhel' and 'centos' declare themselves to be like 'fedora'.
We have to move the check for Ubuntu before the one for Debian,
however, because 'ubuntu' declares itself to be like 'debian'
and it would end up with the wrong defaults otherwise.
Suggested-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The documentation included in these manual pages is mostly useful
to users of the 'send-key' virsh command, and the virsh manual
page refers to them, so it makes more sense to install them along
with virsh instead of libvirtd.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
I introduced support for these vim plugins several years ago
but have since moved away from them. These days developers
are likely better served by lsp-based tooling, which doesn't
require additional per-project configuration.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The files marked as export-ignore here are not going to be
included in the tarball produced by 'meson dist' when using
meson >= 0.60.
Older versions of meson excluded a small subset of these files
automatically, but since we have more control now we can be
more aggressive and leave out anything that doesn't make sense
in a release tarball.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current use of an array for nwfilter objects requires
the caller to iterate over all elements to find a filter,
and also requires locking each filter.
Switching to a pair of hash tables enables O(1) lookups
both by name and uuid, with no locking required.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The comment against the 'updateMutex' refers to a problem with
lock ordering when looking up filters in the virNWFilterObjList
which uses an array. That problem does indeed exist.
Unfortunately it claims that switching to a hash table would
solve the lock ordering problems during instantiation. That
is not correct because there is a second lock ordering
problem related to how we traverse related filters when
instantiating filters. Consider a set of filters:
Filter A:
Reference Filter C
Reference Filter D
Filter B:
Reference Filter D
Reference Filter C
In one example, we lock A, C, D, in the other example
we lock A, D, C.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virNWFilterObjListNumOfNWFilters method iterates over the
driver->nwfilters, accessing virNWFilterObj instances. As such
it needs to be protected against concurrent modification of
the driver->nwfilters object.
This API allows unprivileged users to connect, so users with
read-only access to libvirt can cause a denial of service
crash if they are able to race with a call of virNWFilterUndefine.
Since network filters are usually statically defined, this is
considered a low severity problem.
This is assigned CVE-2022-0897.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When nodedev objects are added and removed if possible check if mdev-types is
supported by the object and trigger a mdev device definition update to correct
the associated parent nodedevs.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The parent of the mdev definition can change due to the existance of the
parent device. The parents existance can e.g. depend on the device
driver load state.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The function will be reused in the nodedev drivers udev handling.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The virNetDevGenerateName() function uses a global array of
virNetDevGenName structs to find next unused name for network
device. This obviously needs some locking and in fact each member
of the array has its own lock. However, these members are not
virObjects, they are just plain structs, therefore
VIR_WITH_MUTEX_LOCK_GUARD() must be used instead of
VIR_WITH_OBJECT_LOCK_GUARD() to lock individual mutexes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This allows init job even if cb structure is not set. This patch
also includes slight rewriting of the function to make it look
cleaner when freeing resources, by allocating privateData at the
end.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We should allow resetting / freeing / restoring / parsing /
formatting qemuDomainJobObj even if 'cb' attribute is not set.
This is theoretical for now, but the attribute must not be always
set in the future. It is sufficient to check if 'cb' exists
before dereferencing it.
This commit partially reverts af16e754cd.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On domain startup a couple of devices are allowed in the devices
controller no matter the domain configuration. The aim is to
allow devices crucial for QEMU or one of its libraries, or user
is passing through a device (e.g. through additional cmd line
arguments) and wants QEMU to access it.
However, during unplug it may happen that a device is configured
to use one of such devices and since we deny /dev nodes on
hotplug we would deny such device too. For example,
/dev/urandom belongs onto the list of implicit devices and users
can hotplug and hotunplug an RNG device with /dev/urandom as
backend.
The fix is fortunately simple - just consult the list of implicit
devices before removing the device from the namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In all cases virCgroupDenyDevicePath() is followed by
virDomainAuditCgroupPath(). Might as well pack that into one
function and call it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In all cases virCgroupAllowDevicePath() is followed by
virDomainAuditCgroupPath(). Might as well pack that into one
function and call it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When allowing or denying RNG device in CGroups there's a special
check if the backend device exists (errno == ENOENT) in which
case success is returned to caller. This is in contrast with the
rest of the functions and in fact wrong too - if the backend
device doesn't exist then QEMU will fail opening it. Might as
well signal error here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>