These are intended to be used for just a few specific tests,
but since we don't always free them up afterwards they could
end up accidentally affecting subsequent tests as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Follow the example of other similar settings and only enable it
for the few test cases that are actually about the specific
functionality, disabling it immediately afterwards.
A few test cases that were completely unrelated to SPICE TLS no
longer see the effects of having the feature enabled.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Just like TLSx509certdirs, these can be set throughout the
lifetime of the test program.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The various TLSx509certdirs can be set throughout the lifetime
of the test program without issue.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use latest caps for the tests even though the original test case didn't
need any capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use DO_TEST_CAPS_LATEST for cputune-numatune, cputune-zero-shares,
cputune, and vcpu-placement-static cases. Do the necessary tweaks to
work with actual data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use DO_TEST_CAPS_LATEST for the basic tests. The emulator needed to be
tweaked to work with the real caps data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'iothreads-disk' covers everything that 'iothreads' did in addition to
actually using the iothread.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMU versions now support iothreads thus upcoming patches
will be removing the capability checks. Remove the 'iothreads-nocap'
case which will become invalid.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of having each test manually initialize and cleanup
its own fakerootdir, do that as part of the common test
initialization logic in virTestMain().
In most cases we can simply drop the relevant code from the
test program, but scsihosttest uses the value of fakerootdir
as a starting point to build another path, so we need to do
things slightly differently. In order to keep things working,
we retrieve the value from the LIBVIRT_FAKE_ROOT_DIR
environment variable, same as all the mock libraries are
already doing.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Most replacements are completely straightforward but
vircgrouptest requires slightly different handling because,
instead of initializing a single fakerootdir at the start of
the test program and cleaning it up at the end, it creates
multiple different ones one after the other.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
These cover various scenarios related to firmware formats,
specifically ensuring that all the ways in which the user can
ask for a non-default format to be used work correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
At the moment, if SMM is explicitly disabled in the domain XML
but a firmware descriptor that requires SMM to be enabled has
the highest priority and otherwise matches the requirements,
we pick that firmware only to error out later, when the domain
is started.
A better approach is to take into account the fact that SMM is
disabled while performing autoselection, and ignore all
descriptors that advertise the requires-smm feature.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These cover scenarios such as using the new, more verbose
format of the <nvram> element to point to a local path, mixing
firmware autoselection with non-local NVRAM files, and
explicitly disabling SMM when using firmware autoselection.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is already the case for the vast majority, but a few are
using explicit capabilities lists.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU's "reconnect" option of "-netdev stream" tells QEMU to
periodically (period is given in seconds as an argument to the option)
attempt to reconnect to the same passt socket to which it had
originally connected to. This is useful in cases where the passt
process terminates, and libvirtd starts a new passt process in its
place (which doesn't happen yet, but will happen automatically after
an upcoming patch in this series).
Since there is no real hueristic for determining the "best" value of
the reconnect interval, rather than clutter up config with a knob that
nobody knows how to properly twiddle, we just set the reconnect timer
to 5 seconds.
"-netdev stream" first appeared in QEMU 7.2.0, but the reconnect
option won't be available until QEMU 8.0.0, so we need to check QEMU
capabilities just in case someone is using QEMU 7.2.0 (and thus can
support passt backend, but not reconnect)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is already possible with qemu, and actually already happening with
q35 machines and a specified watchdog since q35 already includes a
watchdog we do not include in the XML. In order to express such
posibility multiple watchdogs need to be supported.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Support virtio-crypto device, also support cryptodev types:
- builtin
- lkcf
Finally, we can launch a VM(QEMU) with one or more crypto devices by
libvirt.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This consists of (1) adding the necessary args to the qemu commandline
netdev option, and (2) starting a passt process prior to starting
qemu, and making sure that it is terminated when it's no longer
needed. Under normal circumstances, passt will terminate itself as
soon as qemu closes its socket, but in case of some error where qemu
is never started, or fails to startup completely, we need to terminate
passt manually.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Enable the qemuxml2xml variant and add output data for qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introduce a new argument type for testQemuInfoSetArgs named ARG_FD_GROUP
which allows users to instantiate tests with populated FD passing hash
table.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Up until commit 629282d884, using mode=restrictive caused
virNumaSetupMemoryPolicy() to be called from qemuProcessHook(),
and that in turn resulted in virNumaNodesetIsAvailable() being
called and the nodeset being validated.
After that change, the only validation for the nodeset is the one
happening in qemuBuildMemoryBackendProps(), which is skipped when
using mode=restrictive.
Make sure virNumaNodesetIsAvailable() is called whenever a
nodeset has been provided by the user, regardless of the mode.
https://bugzilla.redhat.com/show_bug.cgi?id=2156289
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The one for mode=strict fails, as expected, while the one for
mode=restrictive currently doesn't even though it should. The
next commit will address the issue.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
According to the result parsing from xml, add the argument of
SGX EPC memory backend into QEMU command line.
$ qemu-system-x86_64 \
...... \
-object '{"qom-type":"memory-backend-epc","id":"memepc0","prealloc":true,"size":67108864,"host-nodes":[0,1],"policy":"bind"}' \
-object '{"qom-type":"memory-backend-epc","id":"memepc1","prealloc":true,"size":16777216,"host-nodes":[2,3],"policy":"bind"}' \
-machine sgx-epc.0.memdev=memepc0,sgx-epc.0.node=0,sgx-epc.1.memdev=memepc1,sgx-epc.1.node=1
Signed-off-by: Lin Yang <lin.a.yang@intel.com>
Signed-off-by: Haibin Huang <haibin.huang@intel.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduced in QEMU's commit of v4.2.0-rc0~23^2~4 the .failover
attribute of virtio-net device is always available for all QEMU
versions we support (4.2.0, currently). Therefore, we can assume
the capability is always set and thus doesn't need to be checked
for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.10.0-rc0~95^2~20 the
.tx_queue_size attribute of virtio-net device is always available
for all QEMU versions we support (4.2.0, currently). Therefore,
we can assume the capability is always set and thus doesn't need
to be checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.8.0-rc0~116^2~26 the
.rx_queue_size attribute of virtio-net device is always available
for all QEMU versions we support (4.2.0, currently). Therefore,
we can assume the capability is always set and thus doesn't need
to be checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v3.0.0-rc0~124^2~1 the
set-numa-node command is always available for all QEMU versions
we support (4.2.0, currently). Therefore, we can assume the
capability is always set and thus doesn't need to be checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.1.0-rc0~41^2~26 only for Linux,
and later in v3.1.0-rc0~71^2~10 for all POSIX, the
memory-backend-file is going to be present for all QEMU versions
we support (4.2.0, currently). Therefore, we can assume the
capability is always set and thus doesn't need to be checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.1.0-rc0~41^2~104 the
memory-backend-ram is going to be present for all QEMU versions
we support (4.2.0, currently). Therefore, we can assume the
capability is always set and thus doesn't need to be checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim of this test case it to make sure we error out when
QEMU_CAPS_OBJECT_MEMORY_RAM is missing. Well, it's never going to
be missing. Drop the test case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, we have maybe a dozen tests for hugepages related
stuff in qemuxml2argvtest. In all cases DO_TEST() is used, which
means we have to enumerate all capabilities needed (though, it's
usually just QEMU_CAPS_OBJECT_MEMORY_RAM and
QEMU_CAPS_OBJECT_MEMORY_FILE, exceptionally
QEMU_CAPS_OBJECT_MEMORY_FILE_DISCARD too).
Instead of deleting the caps flags one-by-one, just switch the
tests to use DO_CAPS_LATEST().
The qemuxml2xmltest will undergo similar treatment in next
commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The removal of the special internal flag for '-netdev' validatition now
allows us to use the same virCommand object for validation of the
schema.
Pass it into the validator instead of re-parsing and re-generating
everything.
This improved the runtime of qemuxml2argvtest by ~25% on my box.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The qemuxml2argvtest pseries-feature parse failure tests uses a symlink
to the pseries-features.xml test domain and control which feature it is
supposed to fail by excluding it from the capabilities list. The
advantage of this approach is that the same XML can be used in multiple
tests.
One downside is that any new pseries capability must be declared in all
existent tests, otherwise all other tests can break if this new
capability happens to be validated early in qemu_validate.c. Any new
parse_error test must declare all other existent capabilities.
Another downside is the fact that we're testing fairly improbable
scenarios: all pseries capabilities being tested here were introduced by
the same QEMU version, 4.2.0, at least as far as libvirt is aware of.
This means that it's no possible to have a scenario where, for example,
ccf-assist is not present but cfpc is. And last, but not the least, it's
getting in the way of our effort to convert all pseries tests to not use
explicit capabilities.
Changing all these tests to use DO_TEST_PARSE_ERROR_NOCAPS() will allow
us to test exactly what we want to test, which is the parse error given
for each feature if the binary does not have support for it. The XML
being used for each test can be simplified to just declare a single
feature. In the end we'll end up with more XML lines, but less
complexity inside qemuxml2argvtest.c.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Eliminate most of the pseries tests that are using explicit qemu caps
instead of CAPS_LATEST. The remaining tests will be handled in the next
patch.
The changes made are trivial: rename the .args/.err files to
ppc64-latest.(args/err) and do the required changes to match the newest
capabilities.
A notable expection were tests pseries-console-native,
pseries-serial-compat and pseries-serial+console-native. These are
aliases of the pseries-serial-native tests. In this case we needed to
re-create the symlink accordingly.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Don't validate the root node and don't allocate a private XPath context
when virXMLParse can do that internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The generic helper also has helper code to validate the root element and
create an XPath context. Many places in the code duplicate code for
doing these operations.
Extend the helper to provide all arguments and fix all callers.
In many cases this patch refactors the passing of the 'validate'
field into a separate variable to avoid quirky looking arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in libvirt by:
commit f245a9791c
qemu: introduce capability for virtual-css-bridge
Which mentions that its support was in QEMU 2.7.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This capability was introduced by libvirt commit:
commit 263e65fd20
qemu: introduce vfio-ccw capability
It probes for the cssid-unrestricted property of
virtual-css-bridge, which was introduced in QEMU v2.12 by:
commit 99577c492fb2916165ed9bc215f058877f0a4106
s390x/css: unrestrict cssids
Since we bumped the minimum QEMU version to 4.2.0, assume
this property is always present.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Among the usual changes, this puts the virtio memballoon on the CCW bus.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Besides the -cpu host, The host-phys-bits=on applies to custom or max
cpu model, So the host-passthrough validation check is unnecessary for
maxphysaddr with mode='passthrough'.
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Added by QEMU commit:
commit 74b3e46630446568aecb0be1c77c4875d7a52f6d
Author: Jason Wang <jasowang@redhat.com>
CommitDate: 2019-10-25 07:46:22 -0400
virtio: add property to enable packed virtqueue
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <20191025083527.30803-9-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
git describe: v4.1.0-1780-g74b3e46630 contains: v4.2.0-rc0~32^2~17
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduced by QEMU commit 0846e6359c407e372f446723b8b7b09ac20d0f03
released in QEMU 1.3.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
As noted by the comments the only difference was the qemu capabilities
asserted. Now that we use only real caps for this test case it makes no
sense to have two copies.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Turn them into DO_TEST_CAPS_VER bound to qemu-4.2 to show the minimum
amount of change. We already have DO_TEST_CAPS_LATEST versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Further patches will try to remove QEMU_CAPS_VIRTIO_PCI_DISABLE_LEGACY,
so add few more modern tests before doing that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch from QEMU_CAPS_VIRTIO_PCI_DISABLE_LEGACY to
QEMU_CAPS_VIRTIO_PCI_TRANSITIONAL as it has no impact on the test
output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced back in 2013 by QEMU commit:
commit 398489018183d613306ab022653552247d93919f
pc: limit 64 bit hole to 2G by default
Released in 1.6.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This is needed to ensure the environment variables that we need
for the test program itself, specifically to load mock libraries,
do not interfere with any command that gets invoked by it, either
directly or indirectly. We already perform the same cleanup step
for LD_* variables.
This makes the test failures
error : virCommandWait:2752 : internal error: Child process
(/usr/libexec/qemu/vhost-user/test-vhost-user-gpu --print-capabilities)
unexpected fatal signal 6: dyld[8896]: symbol not found in flat
namespace '_virQEMUCapsGet'
error : qemuVhostUserFillDomainGPU:394 : operation failed: Unable to
find a satisfying vhost-user-gpu
that were showing up on macOS 12 go away.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced back in 2010 by QEMU commit:
commit a697a334b3c4d3250e6420f5d38550ea10eb5319
virtio-net: Introduce a new bottom half packet TX
Released in QEMU 0.14.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Modernize the tests as they mostly care that the aliases are properly
propagated to qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code no longer uses the capability so the tests don't need to assert
it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Minimum qemu version is going to be bumped to qemu-4.2. Upgrading the
version of these tests doesn't make sense as the host cpu in the real
capabilities doesn't support the features the tests are attempting to
test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Minimum qemu will be bumped to 4.2 so this test no longer makes sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Minimum qemu will be bumped to 4.2 so remove the older test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting from qemu-4.0 a new device model name is used instead of the
'disable_*' props. Since we are going to bump to qemu-4.2 as minimum
this test can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Minimum qemu version will be bumped to qemu-4.2 so we no longer need to
care about configuring audiodevs via the environment variables.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will bump minimum supported qemu version to 4.2 which
will use '-blockdev' with qemu so we can drop all the old test cases for
pre-blockdev configs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will bump minimum qemu version to 4.2. In this case we
the 'latest' case is sufficient as with qemu-4.2 we already behave as
upstream ('qemu64' cpu is used instead of 'qemu32').
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch maps /domain/cpu/maxphysaddr into -cpu parameters:
- <maxphysaddr mode='passthrough'/> becomes host-phys-bits=on
- <maxphysaddr mode='emualte' bits='42'/> becomes phys-bits=42
Passthrough mode can only be used if the chosen CPU model is
'host-passthrough'. Also validate that an explicitly specified
bits value does not exceed the physical address bits on the host.
The feature is available since QEMU 2.7.0.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have all the machinery needed, we can introduce two
simple test cases:
1) only TPM 1.2 is supported, but TPM 2.0 was requested in domain XML,
2) only TPM 2.0 is supported, but TPM 1.2 was requested in domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Almost all of memory models we currently support allow setting
virDomainMemoryDef::targetNode so that the memory module is
associated with given guest NUMA node. And we do have a check
whether the requested node is within bounds, but it's executed
only when building QEMU's cmd line. Move it into validation
phase.
While this commit is moving the validation to a place that does
not validate all the possible code paths, it's okay, because only
the explicit memory device has user-configurable target node
which could break the assumption.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
So far, we are testing memory-hotplug-dimm-addr against a set of
explicitly listed capabilities. While this works, lets switch it
to DO_TEST_CAPS_LATEST() so that the latest capabilities are
used. This in turn means, we have to update the <emulator/>
because the latest capabilities don't contain caps for
qemu-system-i386.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When the <loader stateless='yes'/> attribute is set, the QEMU driver
needs to do three things
- Avoid looking for an NVRAM template
- Avoid auto-populating an <nvram/> path
- Find firmware descriptors with mode=stateless instead of mode=split
Note, the first thing happens automatically when we solve the second
thing.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Normally when an UEFI firmware is marked as read-only, an associated
NVRAM file will be created. Some builds of UEFI firmware, however, wish
to remain stateless and so will be read-only, but never have any NVRAM
file. To represent this concept a 'stateless' tristate bool attribute
is introduced on the <loader/> element.
There are rather a large number of permutations to consider.
With default firmware selection
* <os/>
=> Historic default, no change
* <os>
<loader stateless='yes'/>
</os>
=> Explicit version of historic default, no change
* <os>
<loader stateless='no'/>
</os>
=> Invalid, bios is always stateless
With manual legacy BIOS selection
* <os>
<loader>/path/to/seabios</loader>
...
</os>
=> Historic default, no change
* <os>
<loader stateless='yes'>/path/to/seabios</loader>
...
</os>
=> Explicit version of historic default, no change
* <os>
<loader stateless='no'>/path/to/seabios</loader>
...
</os>
=> Invalid, bios is always stateless
With manual UEFI selection
* <os>
<loader type='pflash'>/path/to/edk2</loader>
...
</os>
=> Historic default, no change
* <os>
<loader type='pflash' stateless='yes'>/path/to/edk2</loader>
...
</os>
=> Skip auto-filling NVRAM / template
* <os>
<loader type='pflash' stateless='no'>/path/to/edk2</loader>
...
</os>
=> Explicit version of historic default, no change
With automatic firmware selection
* <os firmware='bios'/>
=> Historic default, no change
* <os firmware='bios'>
<loader stateless='yes'/>
</os>
=> Explicit version of historic default, no change
* <os firmware='bios'>
<loader stateless='no'/>
</os>
=> Invalid, bios is always stateless
* <os firmware='uefi'/>
=> Historic default, no change
* <os firmware='uefi'>
<loader stateless='yes'/>
</os>
=> Skip auto-filling NVRAM / template
* <os firmware='uefi'>
<loader stateless='no'/>
</os>
=> Explicit version of historic default, no change
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
These wrapper functions were used to adapt the virObjectUnref() function
signature for different callbacks. But in commit 0d184072, the
virObjectUnref() function was changed to return a void instead of a
bool, so these adapters are no longer necessary.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Currently, we have bunch of PCI/USB tests cases for
qemuxml2argvtest and qemuxml2xmltest but all of them run without
any capabilities. This makes is needlessly complicated when
trying to extend them. Switch to DO_TEST_CAPS_LATEST().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The cpu commandline is identical with the '-latest' version so there's
no need for a separate case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make it obvious that the fake cpu does not apply to the test cases based
on real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test was showing that the 'blockdev' capability is properly added
although we didn't detect it yet. Unfortunately this test can't be
carried over once we bump minimum qemu version to qemu-4.2.
Make the test case future-proof by removing the qemu-4.0.0 version which
would become pointless and use only already deprecated capability flags
so that the test output does not change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The tested net device has the same syntax with latest qemu so there's no
need to have a version-locked test for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The cpu feature formatting doesn't change between the versions thus we
can just keep the '-latest' versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The tested feature doesn't change across versions so we can use the
modern testing infrastructure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The version-locked version of the test data is identical to the 'latest'
version so we can remove them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prior to qemu-3.2 we'd have to disable the 'pconfig' feature explicitly
which is no longer needed with new qemu. Remove the version locked to
qemu-3.1 as the 'latest' case sufficiently handles what we want to test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Generally speaking, when firmware autoselection is in use we
don't want any information to be provided manually. There are
two exceptions:
* we still want the path to the NVRAM file to be customizable;
* using <loader secure='yes'/> was how you would ask for a
firmware that implements the Secure Boot feature in the
original approach to firmware autoselection, so we want to
keep that working.
Anything else should result in a descriptive error.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/327
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This combination doesn't make sense and so the firmware
autoselection logic will not be able to find a suitable firmware,
but it's more user-friendly to report a detailed error upfront.
Note that this check would ideally happen in the validate phase,
but if we moved it there we would no longer be able to
automatically enable secure-boot when enrolled-keys=yes. Since
the combination never resulted in a working configuration, the
chances of this causing real-world VMs to disappear are
extremely low.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Note that some of these new tests are displaying incorrect or
suboptimal behavior. When we address those in upcoming patches,
this will be highlighted by changes in the test data.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Group all tests related to firmware selection together and give
them consistent names that leave room for further tests to be
added in an upcoming commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the newly added ARG_CAPS_HOST_CPU_MODEL to set which host CPU we
expect the test to use - the test should fail when using a POWER8 host
cpu but complete when using a POWER9 host cpu.
Two new macros were added because we will be adding similar tests in the
near future when adding support for the Power10 chip.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When loading a latest caps for an arch for the first time the following
occurs in testQemuInfoInitArgs():
- the caps file is located. It's not in the cache since it's the first time
it's being read;
- the cachecaps are retrieved using qemuTestParseCapabilitiesArch() and
stored in the capscache;
- FLAG_REAL_CAPS is set and regular flow continues.
Loading the same latest caps for the second time the caps are loaded from the
cache, skipping qemuTestParseCapabilitiesArch(). By skipping this function it
means that it also skips virQEMUCapsLoadCache() and, more relevant to
our case, virQEMUCapsInitHostCPUModel(). This function will use the
current arch and cpuModel settings to write the qemuCaps that are being
stored in the cache. And we're also setting FLAG_REAL_CAPS, meaning that
we won't be updating the qemucaps host model via testUpdateQEMUCaps() as
well.
This has side-effects such as:
- the first time the latest caps for an arch is loaded determines the
cpuModel it'll use during the current qemuxml2argvtest run. For
example, when running all tests, the first time the latest ppc64 caps
are read is on "disk-floppy-pseries" test. Since the current host arch
at this point is x86_64, the cpuModel that will be set for this
capability is "core2duo";
- every other latest arch test will use the same hostCPU as the first
one set since we read it from the cache after the first run.
qemuTestSetHostCPU() makes no difference because we won't update the
host model due to FLAG_REAL_CAPS being set. Using the previous example,
every other latest ppc64 test that will be run will be using the
"core2duo" cpuModel.
Using fake capabilities (e.g. using DO_TEST()) prevents FLAG_REAL_CAPS to
be set, meaning that the cpuModel will be updated using the current
settings the test is being ran due to testUpdateQEMUCaps().
Note that not all latest caps arch tests care about the cpuModel being
set to an unexpected default cpuModel. But some tests will care, e.g.
"pseries-cpu-compat-power9", and changing it from DO_TEST() to
DO_TEST_CAPS_ARCH_LATEST() will make it fail every time the
"disk-floppy-pseries" is being ran first.
One way of fixing it is to rethink all the existing logic, for example
not setting FLAG_REAL_CAPS for latest arch tests. Another way is
presented here. ARGS_CAPS_HOST_CPU_MODEL is a new testQemuInfo arg that
allow us to set any specific host CPU model we want when running latest
arch caps tests. This new arg can then be used when converting existing
DO_TEST() testcases to DO_TEST_CAPS_ARCH_LATEST() that requires a
specific host CPU setting to be successful, which we're going to do in
the next patch with "pseries-cpu-compat-power9".
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The USB device redirection works in a similar way as Spice. The
underlying 'dbus' channel is set to "org.qemu.usbredir" by default for
the client to identify the channel purpose (as specified in -display
dbus documentation).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
By default, libvirt will start a private bus and tell QEMU to connect to
it. Instead, a D-Bus "address" to connect to can be specified, or the
p2p mode enabled.
D-Bus display works best with GL & a rendernode, which can be specified
with <gl> child element.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
