When running unprivileged, virSetUIDGIDWithCaps will fail because it
tries to add the requested capabilities to the permitted and effective
sets.
Detect this case, and invoke the child with cleared permitted and
effective sets. If it is a setuid program, it will get them.
Some care is needed also because you cannot drop capabilities from the
bounding set without CAP_SETPCAP. Because of that, ignore errors from
setting the bounding set.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The need_prctl variable is not really needed. If it is false,
capng_apply will be called twice with the same set, causing
a little extra work but no problem. This keeps the code a bit
simpler.
It is also clearer to invoke capng_apply(CAPNG_SELECT_BOUNDS)
separately, to make sure it is done while we have CAP_SETPCAP.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using of a incorrect value for the --holdtime option was silently
ignored and 0 was used. In case a negative number was used, it
overflowed as the API expects a unsigned int.
Fix the data type and getter function type and report errors on
incorrect values.
Reusing the result of virArchFromHost instead of calling it multiple times
Signed-off-by: Tal Kain <tal.kain@ravellosystems.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The rng schema for <controller> had been non-specific about which
types of controllers allowed which models, and also allowed the
num_queues attribute (since that hasn't been released yet, should we
rename it to "numQueues"?) and <master> subelement to be included for
any controller type. In reality, half of the models are allowed only
for type='scsi', and the other half only for type='usb', num_queues is
allowed only for type='scsi', and <master> only for type='usb'.
This patch makes a separate <group> for type='scsi' and type='usb',
with each group allowing only the appropriate model values, and
allowing num_queue and <master> only when appropriate.
<interleave> also hadn't been specified, forcing a specific order of
subelements, which should never be done. (Note that the <interleave>
had to surround the main element attributes that are in the <group>
subelements, due to one of the <group>s containing a subelement).
With this patch, include public headers in "" form is only allowed
for "internal.h". And only the external tools (examples|tools|python
|include/libvirt) can include the public headers in <> form.
Directories python/tools/examples should include them in <> form,
though this patch allows "" form in these directories by excluding
them, a later patch will do the cleanup.
The recent qemu requires "0x" prefix for the disk wwn, this patch
changes virValidateWWN to allow the prefix, and prepend "0x" if
it's not specified. E.g.
qemu-kvm: -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,\
drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,wwn=6000c60016ea71ad:
Property 'scsi-hd.wwn' doesn't take value '6000c60016ea71ad'
Though it's a qemu regression, but it's nice to allow the prefix,
and doesn't hurt for us to always output "0x".
Detected by a simple Shell script:
for i in $(git ls-files -- '*.[ch]'); do
awk 'BEGIN {
fail=0
}
/# *include.*\.h/{
match($0, /["<][^">]*[">]/)
arr[substr($0, RSTART+1, RLENGTH-2)]++
}
END {
for (key in arr) {
if (arr[key] > 1) {
fail=1
printf("%d %s\n", arr[key], key)
}
}
if (fail == 1)
exit 1
}' $i
if test $? != 0; then
echo "Duplicate header(s) in $i"
fi
done;
A later patch will add the syntax-check to avoid duplicate
headers.
Fix the error
util/vircgroup.c: In function 'virCgroupNewDomainPartition':
util/vircgroup.c:1299:11: error: declaration of 'dirname' shadows a global declaration [-Werror=shadow]
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Commit id '1acfc171' resulted in the following valgrind failure:
==25317== 136 (24 direct, 112 indirect) bytes in 1 blocks are definitely lost in loss record 4 of 4
==25317== at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==25317== by 0x4C6F851: virAlloc (viralloc.c:124)
==25317== by 0x4C71493: virBitmapNew (virbitmap.c:74)
==25317== by 0x4C71B79: virBitmapNewData (virbitmap.c:434)
==25317== by 0x402EF2: test8 (virbitmaptest.c:436)
==25317== by 0x40499F: virtTestRun (testutils.c:157)
==25317== by 0x402E8D: mymain (virbitmaptest.c:474)
==25317== by 0x404FDA: virtTestMain (testutils.c:719)
==25317== by 0x39D0821A04: (below main) (in /usr/lib64/libc-2.16.so)
Check for an unsupported QMP command when using the query-tpm-models
and query-tpm-types commands before checking for general errors
in order to avoid error messages in the log.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Check for QMP query-tpm-models and set a capability flag. Do not use
this QMP command if it is not supported.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
The LXC driver currently has code to detect cgroups mounts
and then re-mount them inside the new root filesystem. Replace
this fragile code with a call to virCgroupIsolateMount.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a virCgroupIsolateMount method which looks at where the
current process is place in the cgroups (eg /system/demo.lxc.libvirt)
and then remounts the cgroups such that this sub-directory
becomes the root directory from the current process' POV.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If a cgroup controller is co-mounted with another, eg
/sys/fs/cgroup/cpu,cpuacct
Then it is a requirement that there exist symlinks at
/sys/fs/cgroup/cpu
/sys/fs/cgroup/cpuacct
pointing to the real mount point. Add support to virCgroupPtr
to detect and track these symlinks
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupNewDriver method had a 'bool privileged' param.
If a false value was ever passed in, it would simply not
work, since non-root users don't have any privileges to create
new cgroups. Just delete this broken code entirely and make
the QEMU driver skip cgroup setup in non-privileged mode
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Historically QEMU/LXC guests have been placed in a cgroup layout
that is
$LOCATION-OF-LIBVIRTD/libvirt/{qemu,lxc}/$VMNAME
This is bad for a number of reasons
- The cgroup hierarchy gets very deep which seriously
impacts kernel performance due to cgroups scalability
limitations.
- It is hard to setup cgroup policies which apply across
services and virtual machines, since all VMs are underneath
the libvirtd service.
To address this the default cgroup location is changed to
be
/system/$VMNAME.{lxc,qemu}.libvirt
This puts virtual machines at the same level in the hierarchy
as system services, allowing consistent policy to be setup
across all of them.
This also honours the new resource partition location from the
XML configuration, for example
<resource>
<partition>/virtualmachines/production</partitions>
</resource>
will result in the VM being placed at
/virtualmachines/production/$VMNAME.{lxc,qemu}.libvirt
NB, with the exception of the default, /system, path which
is intended to always exist, libvirt will not attempt to
auto-create the partitions in the XML. It is the responsibility
of the admin/app to configure the partitions. Later libvirt
APIs will provide a way todo this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Allow VMs to be placed into resource groups using the
following syntax
<resource>
<partition>/virtualmachines/production</partition>
</resource>
A resource cgroup will be backed by some hypervisor specific
functionality, such as cgroups with KVM/LXC.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A resource partition is an absolute cgroup path, ignoring the
current process placement. Expose a virCgroupNewPartition API
for constructing such cgroups
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently if virCgroupMakeGroup fails, we can get in a situation
where some controllers have been setup, but others not. Ensure
we call virCgroupRemove to remove what we've done upon failure
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virCgroupPtr struct contains 3 pieces of
information
- path - path of the cgroup, relative to current process'
cgroup placement
- placement - current process' placement in each controller
- mounts - mount point of each controller
When reading/writing cgroup settings, the path & placement
strings are combined to form the file path. This approach
only works if we assume all cgroups will be relative to
the current process' cgroup placement.
To allow support for managing cgroups at any place in the
heirarchy a change is needed. The 'placement' data should
reflect the absolute path to the cgroup, and the 'path'
value should no longer be used to form the paths to the
cgroup attribute files.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some aspects of the cgroups setup / detection code are quite subtle
and easy to break. It would greatly benefit from unit testing, but
this is difficult because the test suite won't have privileges to
play around with cgroups. The solution is to use monkey patching
via LD_PRELOAD to override the fopen, open, mkdir, access functions
to redirect access of cgroups files to some magic stubs in the
test suite.
Using this we provide custom content for the /proc/cgroup and
/proc/self/mounts files which report a fixed cgroup setup. We
then override open/mkdir/access so that access to the cgroups
filesystem gets redirected into files in a temporary directory
tree in the test suite build dir.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rename all the virCgroupForXXX methods to use the form
virCgroupNewXXX since they are all constructors. Also
make sure the output parameter is the last one in the
list, and annotate all pointers as non-null. Fix up
all callers, and make sure they use true/false not 0/1
for the boolean parameters
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The definition of structs for cgroups are kept in vircgroup.c since
they are intended to be private from users of the API. To enable
effective testing, however, they need to be accessible. To address
the latter issue, without compronmising the former, this introduces
a new vircgrouppriv.h file to hold the struct definitions.
To prevent other files including this private header, it requires
that __VIR_CGROUP_ALLOW_INCLUDE_PRIV_H__ be defined before inclusion
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of calling virCgroupForDomain every time we need
the virCgrouPtr instance, just do it once at Vm startup
and cache a reference to the object in virLXCDomainObjPrivatePtr
until shutdown of the VM. Removing the virCgroupPtr from
the LXC driver state also means we don't have stale mount
info, if someone mounts the cgroups filesystem after libvirtd
has been started
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of calling virCgroupForDomain every time we need
the virCgrouPtr instance, just do it once at Vm startup
and cache a reference to the object in qemuDomainObjPrivatePtr
until shutdown of the VM. Removing the virCgroupPtr from
the QEMU driver state also means we don't have stale mount
info, if someone mounts the cgroups filesystem after libvirtd
has been started
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupForDriver method recently gained an 'int controllers'
parameter, but the stub impl did not
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On Win32 symlink() is not available, so virstoragetest.c
must be conditionalized to avoid compile failures.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On win32, all code is position independent and adding -fPIE
to the compiler flags results in warnings being printed
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
