Commit Graph

108 Commits

Author SHA1 Message Date
Jim Fehlig
b9c10268e1 Add actions to virDomainLifecycle enum
Xen supports on_crash actions coredump-{destroy,restart}.  libvirt
cannot parse config returned by xend that contains either of these
actions

xen52 # xm li -l test | grep on_crash
    (on_crash coredump-restart)
xen52 # virsh dumpxml test
error: internal error unknown lifecycle type coredump-restart

This patch adds a new virDomainLifecycleCrash enum and appends
the new options to existing destroy, restart, preserve, and
rename-restart options.
2010-08-20 15:06:30 -06:00
Daniel Veillard
79c27a620a allow memballoon type of none to desactivate it
The balloon device is automatically added to qemu guests if supported,
but it may be useful to desactivate it. The simplest to not change the
existing behaviour is to allow
  <memballoon type="none"/>
as an extra option to desactivate it (it is automatically added if the
memballoon construct is missing for the domain).
The following simple patch just adds the extra option and does not
change the default behaviour but avoid creating a balloon device if
type="none" is used.

* docs/schemas/domain.rng: add the extra type attribute value
* src/conf/domain_conf.c src/conf/domain_conf.h: add the extra enum
  value
* src/qemu/qemu_conf.c: if enum is NONE, don't activate the device,
  i.e. don't pass the args to qemu/kvm
2010-08-11 11:28:17 +02:00
Cole Robinson
82b6d7600e qemu: virtio console support
Enable specifying a virtio console device with:

<console type='pty'>
  <target type='virtio'/>
</console>
2010-07-28 16:48:00 -04:00
Cole Robinson
6b24755235 domain conf: Track <console> target type
All <console> devices now export a <target> type attribute. QEMU defaults
to 'serial', UML defaults to 'uml, xen can be either 'serial' or 'xen'
depending on fullvirt. Understandably there is lots of test fallout.

This will be used to differentiate between a serial vs. virtio console for
QEMU.

Signed-off-by: Cole Robinson <crobinso@redhat.com>
2010-07-28 16:47:59 -04:00
Cole Robinson
4f24ca01e8 qemu: Allow setting boot menu on/off
Add a new element to the <os> block:

  <bootmenu enable="yes|no"/>

Which maps to -boot,menu=on|off on the QEMU command line.

I decided to use an explicit 'enable' attribute rather than just make the
bootmenu element boolean. This allows us to treat lack of a bootmenu element
as 'use hypervisor default'.
2010-07-27 16:38:32 -04:00
Matthias Bolte
cf8cf8a59f esx: Add autodetection for the SCSI controller model
This works for file-backed SCSI disk device with a datastore
related source path.
2010-07-24 17:31:04 +02:00
Matthias Bolte
afb85c5889 esx: Allow 'vmpvscsi' as SCSI controller model 2010-07-24 17:31:04 +02:00
Chris Lalancette
a71be01f04 Add tests for the new Qemu namespace XML.
Thanks to DV for knocking together the Relax-NG changes
quickly for me.

Changes since v1:
 - Change the domain.rng to correspond to the new schema
 - Don't allocate caps->ns in testQemuCapsInit since it is a static table

Changes since v2:
 - Change domain.rng to add restrictions on allowed environment names

Changes since v3:
 - Remove a bogus comment in the tests

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-07-23 17:30:45 -04:00
Daniel P. Berrange
b2f1863533 Explicitly represent balloon device in XML and handle PCI address
To allow compatibility with older QEMU PCI device slot assignment
it is necessary to explicitly track the balloon device in the
XML. This introduces a new device

   <memballoon model='virtio|xen'/>

It can also have a PCI address, auto-assigned if necessary.

The memballoon will be automatically added to all Xen and QEMU
guests by default.

* docs/schemas/domain.rng: Add <memballoon> element
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing
  and formatting for memballoon device. Always add a memory
  balloon device to Xen/QEMU if none exists in XML
* src/libvirt_private.syms: Export memballoon model APIs
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Honour the
  PCI device address in memory balloon device
* tests/*: Update to test new functionality
2010-07-21 11:33:11 +01:00
Jiri Denemark
af53714f47 cpu: Add support for CPU vendor
By specifying <vendor> element in CPU requirements a guest can be
restricted to run only on CPUs by a given vendor. Host CPU vendor is
also specified in capabilities XML.

The vendor is checked when migrating a guest but it's not forced, i.e.,
guests configured without <vendor> element can be freely migrated.
2010-07-07 17:26:00 +02:00
Matthias Bolte
c391291244 Add optional model attribute to the controller element
This is a step towards controller support for the ESX driver.
2010-06-24 14:56:04 +02:00
Philipp Hahn
ff5f7d7204 Allow one-or-more <boot dev="..."/> entries
According to docs/formatdomain.html.in, "The boot element can be
repeated multiple times to setup a priority list of boot devices to try
in turn." The Relax-NG schema required / allowed exactly one entry.

Signed-off-by: Philipp Hahn <hahn@univention.de>
2010-06-21 10:11:33 +02:00
Daniel P. Berrange
9cb08020e1 Fix test breakage from virtio serial changes
The virtio serial changes broke the test suite because they forgot
to add the new address attribute to the domain XML schema. The
xml2xml test also broke because the XML no longer roundtrips. This
is due to testing of auto-addition of <controller> elements. Split
that test case off into a separate XML file to avoid breakage

* docs/schemas/domain.rng: Allow port number for virtio serial addresses
* tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args,
  tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: Revert to
  a simple config to avoid breaking xml2xml test
* tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-auto.xml,
  tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-auto.args: Add
  complex test case for auto-controller addition for xml2argv test
* tests/qemuxml2argvtest.c: Add channel-virtio-auto test
2010-06-08 16:31:50 +01:00
Stefan Berger
a8f75d2c7d vepa: parsing for 802.1Qb{g|h} XML
This patch parses the following two XML descriptions, one for
802.1Qbg and one for 802.1Qbh, and stores the data internally.
The actual triggering of the switch setup protocol has not been
implemented here but the relevant code to do that should go into
the functions associatePortProfileId() and disassociatePortProfileId().

   <interface type='direct'>
      <source dev='eth0.100' mode='vepa'/>
      <model type='virtio'/>
      <virtualport type='802.1Qbg'>
        <parameters managerid='12' typeid='0x123456' typeidversion='1'
         instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/>
      </virtualport>
      <filterref filter='clean-traffic'/>
    </interface>

    <interface type='direct'>
      <source dev='eth0.100' mode='vepa'/>
      <model type='virtio'/>
      <virtualport type='802.1Qbh'>
        <parameters profileid='my_profile'/>
      </virtualport>
    </interface>

I'd suggest to use this patch as a base for triggering the setup
protocol with the 802.1Qb{g|h} switch.

Several rounds of changes were made to this patch. The
following is a list of these changes.
- Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams
  as per Daniel Berrange's request
- Addressing Daniel Berrange's comments:
 - removing macvtap.h's dependency on domain_conf.h by
   moving the virVirtualPortProfileDef structure into macvtap.h
   and not passing virtDomainNetDefPtr to any functions in
   macvtap.c
- Addressed most of Chris Wright's comments:
  - indicating error in case virtualport XML node cannot be parsed
    properly
  - parsing hex and decimal numbers using virStrToLong_ui() with
    parameter '0' for base
  - tgifname (target interface name) variable wasn't necessary
    to pass to openMacvtapTap function anymore
- assigning the virtual port data structure to the virDomainNetDef
  only if it was previously parsed
- make sure that the error code returned by openMacvtapTap() is a negative n
  in case the associatePortProfileId() function failed.
- renaming vsi in the XML to virtualport
- replace all occurrences of vsi in the source as well
- removing mode and MAC address parameters from the functions that
  will communicate with the hareware diretctly or indirectly
- moving the associate and disassociate functions to the end of the
  file for subsequent patches to easier make them generally available
  for export
- passing the macvtap interface name rather than the link device since
  this otherwise gives funny side effects when using netlink messages
  where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev
  all of a sudden gets the MAC address of the macvtap interface.
- Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case
  we wanted to use hook scripts for the setup and so the setup doesn't fail
  here.
- if instance ID UUID is not supplied it will automatically be generated
  - adapted schema to make instance ID UUID optional
  - added test case
- parser and XML generator have been separated into their own
  functions so they can be re-used elsewhere (passthrough case
  for example)
- Adapted XML parser and generator support the above shown type
  (802.1Qbg, 802.1Qbh).
- Adapted schema to above XML
- Adapted test XML to above XML
- Passing through the VM's UUID which seems to be necessary for
  802.1Qbh -- sorry no host UUID
- adding virtual function ID to association function, in case it's
  necessary to use (for SR-IOV)
2010-05-25 17:37:00 -04:00
David Allan
cddd3ac8b0 Add enospace option to qemu disk error policy
* Dan Kenigsberg requested explicit support for the qemu default disk error policy which is enospace
2010-04-09 03:35:47 -04:00
Stefan Berger
8cf0ed02be nwfilter: Add filter schema for nwfilter XML, extend domain XML schema
This patch adds a relaxng nwfilter schema along with a test that
verifies all the test output XML against the schema. The input XMLs
contain a lot of intentional out-of-range values that make them fail the
schema verification, so I am not verifying against those.
2010-04-06 11:09:46 -04:00
Laine Stump
4ee2b31804 Changes to clock timer XML to match final design.
The clock timer XML is being updated in the following ways (based on
further off-list discussion that was missed during the initial
implementation):

1) 'wallclock' is changed to 'track', and the possible values are 'boot'
 (corresponds to old 'host'), 'guest', and 'wall'.

2) 'mode' has an additional value 'smpsafe'

3) when tickpolicy='catchup', there can be an optional sub-element of
   timer called 'catchup':

   <catchup threshold=123 slew=120 limit=10000/>

Those three values are all longs, always optional, and if they are present,
they are positive. Internally, 0 indicates "unspecified".

* docs/schemas/domain.rng: updated RNG definition to account for changes

* src/conf/domain_conf.h: change the C struct and enums to match changes.

* src/conf/domain_conf.c: timer parse and format functions changed to
                          handle the new selections and new element.

* src/libvirt_private.syms: *TimerWallclock* changes to *TimerTrack*

* src/qemu/qemu_conf.c: again, account for Wallclock --> Track change.
2010-04-02 09:50:29 -04:00
Laine Stump
188af565dd Add timer element to domain schema
timers are sub-elements of clocks. A clock can have zero or more
instances of timer. Within the timer, only the name attribute is
required; all other attributes are optional.

A simpler representation of a timer element is:

  <timer name='platform|pit|rtc|hpet|tsc'
         wallclock='host|guest'
         tickpolicy='delay|catchup|merge|discard'
         frequency='123'
         mode='auto|native|emulate|paravirt'
         present='yes|no'/>

frequency is a ulong. All other attributes are simple enums.
2010-03-30 13:57:40 +02:00
David Allan
447c586a0d Add disk error policy to domain XML
* Fixes per feedback from Dan and Daniel
* Added test datafiles
* Re-disabled JSON flags
* Added code to print the error policy attribute when generating XML
* Re-add empty tag
2010-03-26 16:35:18 -04:00
Daniel P. Berrange
e4d7433ef0 Allow a timezone to be specified instead of sync to host timezone
This extends the XML to allow for

  <clock offset='timezone' timezone='Europe/Paris'/>

This is useful if the admin has not configured any timezone on the
host OS, but still wants to synchronize a guest to a specific one.

* src/conf/domain_conf.h, src/conf/domain_conf.c: Support extra
  'timezone' attribute on clock configuration
* docs/schemas/domain.rng: Add 'timezone' attribute
* src/xen/xend_internal.c, src/xen/xm_internal.c: Reject configs
  with a configurable timezone
2010-03-01 18:42:55 +00:00
Daniel P. Berrange
b9e2967a5e Add new clock mode allowing variable adjustments
This introduces a third option for clock offset synchronization,
that allows an arbitrary / variable adjustment to be set. In
essence the XML contains the time delta in seconds, relative to
UTC.

  <clock offset='variable' adjustment='123465'/>

The difference from 'utc' mode, is that management apps should
track adjustments and preserve them at next reboot.

* docs/schemas/domain.rng: Schema for new clock mode
* src/conf/domain_conf.c, src/conf/domain_conf.h: Parse
  new clock time delta
* src/libvirt_private.syms, src/util/xml.c, src/util/xml.h: Add
  virXPathLongLong() method
2010-03-01 18:36:01 +00:00
Matthew Booth
7813a0f81c Add domain support for virtio channel
Add support for virtio-serial by defining a new 'virtio' channel target type
and a virtio-serial controller. Allows the following to be specified in a
domain:

<controller type='virtio-serial' index='0' ports='16' vectors='4'/>
<channel type='pty'>
  <target type='virtio' name='org.linux-kvm.port.0'/>
  <address type='virtio-serial' controller='0' bus='0'/>
</channel>

* docs/schemas/domain.rng: Add virtio-serial controller and virtio
  channel type.
* src/conf/domain_conf.[ch]: Domain parsing/serialization for
  virtio-serial controller and virtio channel.
* tests/qemuxml2xmltest.c
  tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: add domain xml
  parsing test
* src/libvirt_private.syms src/qemu/qemu_conf.c:
  virDomainDefAddDiskControllers() renamed to
  virDomainDefAddImplicitControllers()
2010-02-18 17:52:03 +01:00
Matthew Booth
ad4dde3d50 Fix whitespace in domain.rng
* src/schemas/domain.rng: Replace tabs with 8 spaces
2010-02-18 15:03:42 +01:00
Stefan Berger
c841a1fa7f macvtap support for libvirt -- schema extensions
* docs/schemas/domain.rng: extends the domain xml schema to support the
  new interface type 'direct'
2010-02-15 17:47:29 +01:00
Jiri Denemark
2073ed6f20 Fix <cpu> element in domain XML schema
The current schema is more permissive than the XML parsing code in
libvirt. Precisely, 'match' attribute is optional in schema while in
reality its use is bound to <model> element:

- <cpu> element without 'match' attribute is allowed only if <topology>
  element is the only child element of <cpu>

- <cpu> element with 'match' attribute requires <model> element to be
  present; <topology> and <feature> elements are optional

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2010-02-11 16:46:20 +01:00
Daniel P. Berrange
23d6abd23b Tweak USB hostdevice XML handling
When attaching a USB host device based on vendor/product, libvirt
will resolve the vendor/product into a device/bus pair. This means
that when printing XML we should allow device/bus info to be printed
at any time if present

* src/conf/domain_conf.c, docs/schemas/domain.rng: Allow USB device
  bus info alongside vendor/product
2010-02-02 16:31:47 +00:00
Matthew Booth
6f4ca18d83 Add missing sata controller type to domain.rng
* docs/schemas/domain.rng: Add sata controller type
2010-01-27 14:26:49 +01:00
Jiri Denemark
ce4896fb65 Allow for CPU topology specification without model
Currently CPU topology may only be specified together with CPU model:
    <cpu match='exact'>
        <model>name</model>
        <topology sockets='1' cores='2' threads='3'/>
    </cpu>

This patch allows for CPU topology specification without the need for
also specifying CPU model:
    <cpu>
        <topology sockets='1' cores='2' threads='3'/>
    </cpu>

'match' attribute and 'model' element are made optional with the
restriction that 'match' attribute has to be set when 'model' is
present.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2010-01-19 12:35:22 +01:00
Daniel P. Berrange
4ac290cc33 Add device info to serial, parallel, channel, input & fs devices
Although the serial, parallel, chanel, input & fs devices do
not have PCI address info, they can all have device aliases.
Thus it neccessary to associate the virDomainDeviceInfo data
with them all.

* src/conf/domain_conf.c, src/conf/domain_conf.h: Add hooks for
  parsing / formatting device info for serial, parallel, channel
  input and fs devices.
* docs/schemas/domain.rng: Associate device info with character
  devices, input & fs device
2010-01-18 13:38:56 +00:00
Wolfgang Mauerer
74ec5e65ce Add new domain device: "controller"
This augments virDomainDevice with a <controller> element
that is used to represent disk controllers (e.g., scsi
controllers). The XML format is given by

  <controller type="scsi" index="<num>">
     <address type="pci" domain="0xNUM" bus="0xNUM" slot="0xNUM"/>
  </controller>

where type denotes the disk interface (scsi, ide,...), index
is an integer that identifies the controller for association
with disks, and the <address> element specifies the controller
address on the PCI bus as described in previous commits
The address element can be omitted; in this case, an address
will be assigned automatically.

Most of the code in this patch is from Wolfgang Mauerer's
previous disk controller series

 * docs/schemas/domain.rng: Define syntax for <controller>
   XML element
 * src/conf/domain_conf.c, src/conf/domain_conf.h: Define
   virDomainControllerDef struct, and routines for parsing
   and formatting XML
* src/libvirt_private.syms: Add virDomainControllerInsert
   and virDomainControllerDefFree
2010-01-15 16:38:59 +00:00
Daniel P. Berrange
a9e4ea94f1 Add address info to sound, video and watchdog devices
Add the virDomainDeviceAddress information to the sound, video
and watchdog devices. This means all of them gain the new XML
element

  <address .... />

This brings them upto par with disk/net/hostdev devices which
already have address info

* src/conf/domain_conf.h: Add virDomainDeviceAddress to sound,
  video & watchdog device struts.
* src/conf/domain_conf.c: Hook up parsing/formatting for
  virDomainDeviceAddress in sound, video & watchdog devices
* docs/schemas/domain.rng: Associate device address info
  with sound, video & watchdog
2010-01-15 16:38:08 +00:00
Daniel P. Berrange
d812e7aeb8 Extend the virDomainDeviceAddress struture to allow disk controller addresses
Introduce a new structure

      struct _virDomainDeviceDriveAddress {
        unsigned int controller;
        unsigned int bus;
        unsigned int unit;
      };

and plug that into virDomainDeviceAddress and generates XML that
looks like

  <address type='drive' controller='1' bus='0' unit='5'/>

This syntax will be used by the QEMU driver to explicitly control
how drives are attached to the bus

* src/conf/domain_conf.h, src/conf/domain_conf.c: Parsing and
  formatting of drive addresses
* docs/schemas/domain.rng: Define new address format for drives
2010-01-15 16:37:57 +00:00
Daniel P. Berrange
1b0cce7d3a Introduce a standardized data structure for device addresses
All guest devices now use a common device address structure
summarized by:

  enum virDomainDeviceAddressType {
    VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE,
    VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI,
  };

  struct _virDomainDevicePCIAddress {
    unsigned int domain;
    unsigned int bus;
    unsigned int slot;
    unsigned int function;
  };

  struct _virDomainDeviceInfo {
    int type;
    union {
        virDomainDevicePCIAddress pci;
    } addr;
  };

This replaces the anonymous structs in Disk/Net/Hostdev data
structures. Where available, the address is *always* printed
in the XML file, instead of being hidden in the internal state
file.

  <address type='pci' domain='0x0000' bus='0x1e' slot='0x07' function='0x0'/>

The structure definition is based on Wolfgang Mauerer's disk
controller patch series.

* docs/schemas/domain.rng: Define the <address> syntax and
  associate it with disk/net/hostdev devices
* src/conf/domain_conf.h, src/conf/domain_conf.c,
  src/libvirt_private.syms: APIs for parsing/formatting address
  information. Also remove the QEMU specific 'pci_addr' attributes
* src/qemu/qemu_driver.c: Replace use of 'pci_addr' attrs with
  new standardized format.
2010-01-15 16:37:44 +00:00
Jiri Denemark
6df8b363f7 XML schema for CPU flags
XML schema for CPU flags

Firstly, CPU topology and model with optional features have to be
advertised in host capabilities:

    <host>
        <cpu>
            <arch>ARCHITECTURE</arch>
            <features>
                <!-- old-style features are here -->
            </features>
            <model>NAME</model>
            <topology sockets="S" cores="C" threads="T"/>
            <feature name="NAME"/>
        </cpu>
        ...
    </host>

Secondly, drivers which support detailed CPU specification have to
advertise
it in guest capabilities:

    <guest>
    ...
    <features>
            <cpuselection/>
        </features>
    </guest>

And finally, CPU may be configured in domain XML configuration:

<domain>
    ...
    <cpu match="MATCH">
        <model>NAME</model>
        <topology sockets="S" cores="C" threads="T"/>
        <feature policy="POLICY" name="NAME"/>
    </cpu>
</domain>

Where MATCH can be one of:
    - 'minimum'     specified CPU is the minimum requested CPU
    - 'exact'       disable all additional features provided by host CPU
    - 'strict'      fail if host CPU doesn't exactly match

POLICY can be one of:
    - 'force'       turn on the feature, even if host doesn't have it
    - 'require'     fail if host doesn't have the feature
    - 'optional'    match host
    - 'disable'     turn off the feature, even if host has it
    - 'forbid'      fail if host has the feature

'force' and 'disable' policies turn on/off the feature regardless of its
availability on host. 'force' is unlikely to be used but its there for
completeness since Xen and VMWare allow it.

'require' and 'forbid' policies prevent a guest from being started on a host
which doesn't/does have the feature. 'forbid' is for cases where you disable
the feature but a guest may still try to access it anyway and you don't want
it to succeed.

'optional' policy sets the feature according to its availability on host.
When a guest is booted on a host that has the feature and then migrated to
another host, the policy changes to 'require' as we can't take the feature
away from a running guest.

Default policy for features provided by host CPU but not specified in domain
configuration is set using match attribute of cpu tag. If 'minimum' match is
requested, additional features will be treated as if they were specified
with 'optional' policy. 'exact' match implies 'disable' policy and 'strict'
match stands for 'forbid' policy.

* docs/schemas/capability.rng docs/schemas/domain.rng: extend the
  RelaxNG schemas to add CPU flags support
2009-12-18 14:37:09 +01:00
Daniel Veillard
803d320430 Relax the allowed values for machine type in schema
* docs/schemas/domain.rng: don't try to validate based on a list, open
  up the machine type to a regexp allowing a-z A-Z 0-9 _ - and .
2009-12-14 16:59:06 +01:00
Diego Elio Pettenò
25f7fa0583 Small change of RNG syntax for domain
* docs/schemas/domain.rng: As trang seems to bug with <optional><oneOrMore>
  replace it with <zeroOrMore>
2009-12-11 08:46:11 +01:00
Daniel P. Berrange
e7c78b0a94 Support QEMU's virtual FAT block device driver
Introduce a new type="dir"  mode for <disks> that allows use of
QEMU's  virtual FAT block device driver. eg

    <disk type='dir' device='floppy'>
      <source dir='/tmp/test'/>
      <target dev='fda' bus='fdc'/>
      <readonly/>
    </disk>

gets turned into

  -drive file=fat:floppy:/tmp/test,if=floppy,index=0

Only read-only disks are supported with virtual FAT mode

* src/conf/domain_conf.c, src/conf/domain_conf.h: Add type="dir"
* docs/schemas/domain.rng: Document new disk type
* src/xen/xend_internal.c, src/xen/xm_internal.c: Raise error for
  unsupported disk types
* tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom-empty.args: Fix
  empty disk file handling
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args,
  tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml,
  tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.args,
  tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.xml
  tests/qemuxml2argvtest.c: Test QEMU vitual FAT driver
* src/qemu/qemu_conf.c: Support generating fat:/some/dir type
  disk args
* src/security/security_selinux.c: Temporarily skip labelling
  of directory based disks
2009-11-23 12:17:16 +00:00
Daniel Veillard
2060a0a43e 512069 fix domain XML schemas for backward compatibility
For backward compatibility we used to add the tty path as
a tty attribute on console of type pty, duplicating the value
now found in source/@path, but the Relax-NG grammar wasn't
extended for this
    <console type='pty' tty='/dev/pts/8'>
      <source path='/dev/pts/8'/>
      <target port='0'/>
    </console>

* docs/schemas/domain.rng: allow an optional tty attribute
  containing a devicePath
2009-11-20 15:48:19 +01:00
Matthew Booth
ddfd21f815 Small indentation cleanup of domain schema 2009-11-13 16:03:43 +01:00
Matthew Booth
af249ea468 Support for <channel> in domain and QEmu backend
allows the following to be specified in a domain:
<channel type='pipe'>
  <source path='/tmp/guestfwd'/>
  <target type='guestfwd' address='10.0.2.1' port='4600'/>
</channel>

* proxy/Makefile.am: add network.c as dep of domain_conf.c
* docs/schemas/domain.rng src/conf/domain_conf.[ch]: extend the domain
  schemas and the parsing/serialization side for the new construct

QEmu support will add the following on the qemu command line:
 -chardev pipe,id=channel0,path=/tmp/guestfwd
 -net user,guestfwd=tcp:10.0.2.1:4600-chardev:channel0

* src/qemu/qemu_conf.c: Add argument output for channel
* tests/qemuxml2(argv|xml)test.c: Add test for <channel> domain syntax
2009-11-05 15:31:03 +01:00
Richard Jones
08bed02515 Support QEMU watchdog device.
This adds simple support for configuring a guest with a QEMU/KVM
virtual hardware watchdog device.
2009-10-21 16:37:44 +01:00
Mark McLoughlin
33948c6844 Fix schema to allow missing machine type
The domain/os/type element may have an arch specified without having
a machine variant specified. In fact, this is what python-virtinst
does when defining a guest.

* docs/schemas/domain.rng: allow missing machine type
2009-10-12 10:47:01 +01:00
Daniel Veillard
8fc469b3d5 523639 Allows a <description> tag for domains
* docs/schemas/domain.rng: allow one <description> tag in the top level
  of the <domain> to store user information as text
* src/conf/domain_conf.c src/conf/domain_conf.h: extend the structure
  to store this text, grab it at parse time and save it back when
  present after <uuid>
2009-09-30 16:10:16 +02:00
Daniel P. Berrange
85d15b5143 Add support for setting disk drive serial numbers
* docs/schemas/domain.rng: Add <serial> element to disks
* src/domain_conf.h, src/domain_conf.c: XML parsing and
  formatting for disk serial numbers
* src/qemu_conf.c: Set serial number when launching guests
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.args,
  tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.xml: Add
  serial number to XML test
2009-09-03 13:53:34 +01:00
Daniel P. Berrange
d823a05aef Support configuration of huge pages in guests
Add option to domain XML for

     <memoryBacking>
        <hugepages/>
     </memoryBacking>

* configure.in: Add check for mntent.h
* qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug, src/qemu.conf
  Add 'hugetlbfs_mount' config parameter
* src/qemu_conf.c, src/qemu_conf.h: Check for -mem-path flag in QEMU,
  and pass it when hugepages are requested.
  Load hugetlbfs_mount config parameter, search for mount if not given.
* src/qemu_driver.c: Free hugetlbfs_mount/path parameter in driver shutdown.
  Create directory for QEMU hugepage usage, chowning if required.
* docs/formatdomain.html.in: Document memoryBacking/hugepages elements
* docs/schemas/domain.rng: Add memoryBacking/hugepages elements to schema
* src/util.c, src/util.h, src/libvirt_private.syms: Add virFileFindMountPoint
  helper API
* tests/qemuhelptest.c: Add -mem-path constants
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: Add tests for hugepage
  handling
* tests/qemuxml2argvdata/qemuxml2argv-hugepages.xml,
  tests/qemuxml2argvdata/qemuxml2argv-hugepages.args: Data files for
  hugepage tests
2009-09-03 13:51:55 +01:00
Pritesh Kothari
6aa576cda7 Generic parsing support for video acceleration
* docs/schemas/domain.rng: augment the video model with an optional
  acceleration element with optional accel2d and accel3d flags
* src/domain_conf.c src/domain_conf.h: exten the virDomainVideoDef
  structure with an optional accel field, virDomainVideoAccelDefParseXML
  and virDomainVideoAccelDefFormat functions to parse and serialize
  the structure.
2009-09-03 10:29:35 +02:00
Miloslav Trmač
f340964dc9 Attach encryption information to virDomainDiskDef.
The XML allows <encryption format='unencrypted'/>, this implementation
canonicalizes the internal representation so that "disk->encryption" is
non-NULL iff encryption information is available.

A domain with partial encryption information can be defined,
completeness of the information is not verified.  The domain won't
start until the remaining information is added, of course.

* docs/formatdomain.html, docs/formatdomain.html.in: Document
  new encryption options for disks
* docs/schemas/domain.rng: Pull in storage encryption schema
  rules
* src/domain_conf.h, src/domain_conf.c: Wire up storage encryption
  XML parsing/formatting APIs
2009-09-01 18:36:53 +01:00
Daniel P. Berrange
6b4d18c7b3 Support <video> tag for defining VGA card properties
* docs/schemas/domain.rng: Define <video> element schema
 * src/domain_conf.c, src/domain_conf.h, src/libvirt_private.syms:
   Add parsing and formatting for <video> element
2009-07-08 13:40:32 +01:00
Daniel Veillard
525c3d40a9 PPC Qemu Machine Type update
* src/qemu_conf.c docs/schemas/domain.rng
  tests/capabilityschemadata/caps-qemu-kvm.xml: PPC Qemu Machine Type
  changed from g3bw to g3beige some time ago, patch by Thomas Baker
Daniel
2009-05-29 13:32:06 +00:00
Daniel Veillard
cd223d93da generic support for RDP and desktop graphic extensions
* docs/schemas/domain.rng src/domain_conf.[ch] src/qemu_driver.c:
  extend the generic code for the RDP and desktop extensions of
  the graphic tag needed for vbox, patch by Pritesh Kothari
Daniel
2009-05-15 09:43:51 +00:00
Daniel Veillard
070c1c82b0 Support for 'internal' network
* src/domain_conf.[ch] docs/schemas/domain.rng: add support
  for internal network in the generic part of the code, and
  update the Relax-NG grammar accordingly, patch by Pritesh Kothari
daniel
2009-05-11 09:50:27 +00:00
Daniel Veillard
0722925986 * docs/schemas/domain.rng: some missing disk bus values and cleanups
daniel
2009-04-02 13:19:11 +00:00
Daniel Veillard
0ad4ece725 * docs/schemas/domain.rng: extend definition for security attributes
daniel
2009-03-19 14:26:51 +00:00
Daniel P. Berrange
2dedb34a91 Added ac97 soundcard to RNG schema & tests (Pritesh Kothari) 2009-03-16 10:47:12 +00:00
Daniel P. Berrange
8bd1604cb7 Core internal driver stub for sVirt support (Jams Morris & Dan Walsh) 2009-03-03 09:44:41 +00:00
Daniel Veillard
09fb8845a7 adds a new <hostdev managed='(yes|no)'> property to host devices in domains
* docs/schemas/domain.rng src/domain_conf.c src/domain_conf.h
  src/qemu_conf.c
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.xml
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.xml
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml:
  adds a new <hostdev managed='(yes|no)'> property
  to host devices indicating whether or not we should
  automatically dettach/reset, patch by Mark McLoughlin
daniel
2009-03-02 16:40:30 +00:00
Daniel P. Berrange
67e7416119 Support disk caching mode config 2009-01-30 17:15:39 +00:00
Daniel P. Berrange
2c22a68ce2 Added complete set of RNG schemas for all XML formats 2009-01-27 15:29:53 +00:00