We previously added "-z nodelete" to the build of libvirt.so to prevent
crashes when thread local destructors run which point to a code that
has been dlclose()d:
commit 8e44e5593eb9b89fbc0b54fde15f130707a0d81e
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Thu Sep 1 17:57:06 2011 +0100
Prevent crash from dlclose() of libvirt.so
We forgot to copy this protection into the libvirt-qemu.so, libvirt-lxc.so
and libvirt-admin.so libraries when we introduced them.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Although legal, a few paths were not checking a return value < 0
for failure instead they checked a non zero failure.
Clean them all up to be consistent.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1569678
On some large systems (with ~400GB of RAM) it is possible for
unsigned int to overflow in which case we report invalid number
of 4K pages pool size. Switch to unsigned long long.
We hit overflow in virNumaGetPages when doing:
huge_page_sum += 1024 * page_size * page_avail;
because although 'huge_page_sum' is an unsigned long long, the
page_size and page_avail are both unsigned int, so the promotion
to unsigned long long doesn't happen until the sum has been
calculated, by which time we've already overflowed.
Turning page_avail into a unsigned long long is not strictly
needed until we need ability to represent more than 2^32
4k pages, which equates to 16 TB of RAM. That's not
outside the realm of possibility, so makes sense that we
change it to unsigned long long to avoid future problems.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The attribute can be used to disable ROM loading completely
for a device.
This might be needed because, even when the guest is configured
such that the PCI ROM will not be loaded in the PCI BAR, some
hypervisors (eg. QEMU) might still make it available to the
guest in a form (eg. fw_cfg) that some firmwares (eg. SeaBIOS)
will consume, thus not achieving the desired result.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1425058
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The attribute can be used to disable ROM loading completely
for a device.
This might be needed because, even when the guest is configured
such that the PCI ROM will not be loaded in the PCI BAR, some
hypervisors (eg. QEMU) might still make it available to the
guest in a form (eg. fw_cfg) that some firmwares (eg. SeaBIOS)
will consume, thus not achieving the desired result.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Rework the code such that virDomainObjListFindByID will always
return a locked/ref counted object so that the callers can
always do the same cleanup logic to call virDomainObjEndAPI.
Makes accessing the objects much more consistent.
NB:
There were 2 callers (lxcDomainLookupByID and qemuDomainLookupByID)
that were already using the ByID name, but not virDomainObjEndAPI -
these were changed as well in this update/patch.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Now that every caller is using virDomainObjListFindByUUIDRef,
let's just remove it and keep the name as virDomainObjListFindByUUID.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
For vzDomainLookupByID and vzDomainLookupByUUID let's
return a locked and referenced @vm object so that callers
can then use the common and more consistent virDomainObjEndAPI
in order to handle cleanup rather than needing to know that the
returned object is locked and calling virObjectUnlock.
The LookupByName already returns the ref counted and locked object,
so this will make things more consistent.
Also adjust the prlsdkHandle{VmState|VmRemoved|Perf}Event APIs
in the same manner.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Rather than have two API's doing different things for different
callers, let's make one API that will always return a locked and
ref counted object. That way, the callers will always know that
they must call virDomainObjEndAPI and not have to decide whether
they should call virObjectUnlock instead.
This will make things consistent with LookupByName which returns
the locked and ref counted object.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
For vmwareDomObjFromDomainLocked and vmwareDomainLookupByID
let's return a locked and referenced @vm object so that callers
can then use the common and more consistent virDomainObjEndAPI
in order to handle cleanup rather than needing to know that the
returned object is locked and calling virObjectUnlock.
The LookupByName already returns the ref counted and locked object,
so this will make things more consistent.
For vmwareDomainUndefineFlags and vmwareDomainShutdownFlags since
virDomainObjListRemove will return an unlocked object, we need to
relock before making the EndAPI call.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
If vmwareDomainLookupByID or vmwareDomainLookupByName fails
to find a vm, let's be a bit more descriptive by providing
the failing id or name in the error message.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Rather than repeat code throughout, create and use a couple of
accessors in order to lookup by UUID.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The virDomainObjListFindByName returns a locked and reffed
domain object, all we did was unlock it, leaving an extra
ref. Use the virDomainObjEndAPI to cleanup instead.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The generated source files for dispatching libvirtd RPC messages contain
translations and are thus listed in POTFILES. This means they are
required in order to build libvirt.pot. Rather than changing the files
that go into libvirt.pot dynamically, just unconditionally build the
remote driver sources so they are always available for building
libvirt.pot. This ensures we don't silently loose translation messages
based on configure args.
This fixes the mingw build which needs to create libvirt.pot but has
libvirtd disabled.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When writing the VMX file from the domain XML, write
cpuid.coresPerSocket if there is a specified CPU topology in the guest.
Use the domain XML of esx-in-the-wild-9 in vmx2xml as testcase for
xml2vmxtest.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Convert the cpuid.coresPerSocket key as both number of CPU sockets, and
cores per socket.
Add the VMX file attached to RHBZ#1568148 as testcase esx-in-the-wild-9;
adapt the resulting XML of testcase esx-in-the-wild-8 to the CPU
topology present in that VMX.
https://bugzilla.redhat.com/show_bug.cgi?id=1568148
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
For umlDomObjFromDomainLocked and umlDomainLookupByID let's
return a locked and referenced @vm object so that callers
can then use the common and more consistent virDomainObjEndAPI
in order to handle cleanup rather than needing to know that the
returned object is locked and calling virObjectUnlock. This
means for some consumers we need to relock the @dom after a
virDomainObjListRemove, but before calling virDomainObjEndAPI.
The LookupByName already returns the ref counted and locked object,
so this will make things more consistent.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Rather than an empty failed to find, let's provide a bit more
knowledge about what we failed to find by using the name string
or the id value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Rather than repeat code throughout, create and use a couple of
accessors in order to lookup by UUID. This will also generate
a common error message including the failed uuidstr for lookup
rather than just returning nothing in some instances.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The virDomainObjListFindByName will return a locked and reffed
object. If we call virDomainObjListRemove that will unlock the
object upon return, thus we need to relock the object before
making the call to virDomainObjEndAPI.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There's no need to check if @dom exists before trying to
call virDomainObjListRemove since it must exist due to
prior checks.
Additionally, if we do remove the @dom, then set it to NULL
so that the virObjectUnlock isn't referencing something that
is deleted.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If virJSONValueArraySize(caps) <= 0, then we will still need to
virJSONValueFree(caps) because qemuMonitorSetMigrationCapabilities
won't consume it.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit id '43f2ccdc' called virDomainDiskSourceDefFormatInternal
rather than formatting the the disk source inline. However, it
did not handle the case where the helper failed. Over time the
helper has been renamed to virDomainDiskSourceFormat. Similar to
other consumers, if virDomainDiskSourceFormat fails, then the
formatting could be off, so it's better to fail than to continue
on with some possibly bad data. Alter the function and the caller
to check status and jump to error in that case.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
The code is generic enough to be reused. Move it into a
separate function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far all the properties we are trying to fetch are device
properties, i.e. -device $dev on qemu command line. Change
misleading variable names to express what's queried for better.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current private XML parsing code relies on the assumption
that NUMA node IDs start from 0 and are densely allocated,
neither of which is necessarily the case.
Change it so that the bitmap size is dynamically calculated by
looking at NUMA node IDs instead, which ensures all nodes will
be able to fit and thus the bitmap will be parsed successfully.
Update one of the test cases so that it would fail with the
previous approach, but passes with the new one.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1490158
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allocated in qemuMigrationParamsNew() we need to free
priv->job.migParams when no longer needed.
==8061== 234 (192 direct, 42 indirect) bytes in 1 blocks are definitely lost in loss record 112 of 123
==8061== at 0x4C2CF26: calloc (vg_replace_malloc.c:711)
==8061== by 0x5325D05: virAlloc (viralloc.c:144)
==8061== by 0x1984F9: qemuMigrationParamsNew (qemu_migration_params.c:218)
==8061== by 0x19A352: qemuMigrationParamsParse (qemu_migration_params.c:1185)
==8061== by 0x1604D8: qemuDomainObjPrivateXMLParseJob (qemu_domain.c:2390)
==8061== by 0x160AE9: qemuDomainObjPrivateXMLParse (qemu_domain.c:2517)
==8061== by 0x5419EAE: virDomainObjParseXML (domain_conf.c:20442)
==8061== by 0x541A25E: virDomainObjParseNode (domain_conf.c:20555)
==8061== by 0x541A2FC: virDomainObjParseFile (domain_conf.c:20574)
==8061== by 0x13607D: testCompareStatusXMLToXMLFiles (qemuxml2xmltest.c:75)
==8061== by 0x14F3E8: virTestRun (testutils.c:180)
==8061== by 0x14DCD0: mymain (qemuxml2xmltest.c:1200)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically we have relied on autopoint/gettextize to install a
standard po/Makefile.in.in. There is very limited scope for customizing
this and it also causes a bunch of extra stuff to be pulled into
configure.ac which potentially clashes with gnulib. Writing make rules
for po file management is no more difficult than any other rules libvirt
has, so stop using autopoint/gettextize.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The disk cache mode translates to various frontend and backend
attributes for the qemu block layer. For the frontend device the
'writeback' parameter is used and provided as 'write-cache'. Implement
this so that we can later switch to using -blockdev where we will not
pass the cachemode directly any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
QEMU translates the cache mode of a disk internally into 3 flags.
'write-cache' is a flag of the frontend while others are flag of the
backing storage. Add capability which will allow expressing it via the
frontend attribute.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add helper which will map values of disk cache mode to the flags which
are accepted by various parts of the qemu block layer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Current script confuses on lines like this:
static virHypervisorDriver parallelsHypervisorDriver;
It interprets next lines as if there is open brace.
Let's filter this case from matches.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Broken by [1] commit - trailing comma instead of semicolon. Fortunately
the issue did not get sneak in released 4.2 version. Note that uriSchemes
for parallelsConnectDriver should not be allocated on stack.
[1] 8e4f9a27: "driver: declare supported URI schemes in virConnectDriver struct"
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When qemu does not support changing of the backing store string, we'd
reaport that block pull is not supported instead of block commit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Drop the checking of 'shared' from the ABI stability check. This
property controls whether the hypervisor allows concurrent access to the
same file, but this fact does not influence guest ABI.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Currently it is not used in backing chains and does not seem that we
will need to use it so return it back to the disk definition. Thankfully
most accesses are done via the accessors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Replace direct usage of disk->src->driverName with the existing
accessors. The parser code where we assign the driver from XML is
intentionally not fixed to save an allocation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
There were two places where we'd check this independently. Move it to
the disk definition validation callback. This also fixes possible use of
NULL in a printf for network storage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
On Core i5 650 x86_64 kvm guest fail to start with error [1] for next cpu config:
<cpu mode='host-model' check='partial'>
<model fallback='allow'/>
<feature policy='require' name='x2apic'/>
</cpu>
The problem is in full CPU calculation in virQEMUCapsInitHostCPUModel.
It is supposed to include features emulated by qemu and missed on host. Some of
such features may be not included however.
For Core i5 650 host CPU is detected as Westmere and reported CPU as
SandyBridge. x2apic is missed on host and provided by installed qemu. The
feature is not mentioned in reported CPU features explicitly because SandyBridge
model include it. As a result full CPU does not include x2apic too.
Solution is to expand guest cpu features before updating fullCPU features.
[1] error: the CPU is incompatible with host CPU: \
Host CPU does not provide required features: x2apic
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add a function named virDomainObjCheckIsActive in src/conf/domain_conf.c.
It calls virDomainObjIsActive, raises error if necessary and returns.
There is a lot of occurence of this pattern and it will save 3 lines on
each call.
Signed-off-by: Clementine Hayat <clem@lse.epita.fr>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Our virObject code relies heavily on the fact that the first
member of the class struct is type of virObject (or some
derivation of if). Let's check for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
So far we are repeating the following lines over and over:
if (!(virSomeObjectClass = virClassNew(virClassForObject(),
"virSomeObject",
sizeof(virSomeObject),
virSomeObjectDispose)))
return -1;
While this works, it is impossible to do some checking. Firstly,
the class name (the 2nd argument) doesn't match the name in the
code in all cases (the 3rd argument). Secondly, the current style
is needlessly verbose. This commit turns example into following:
if (!(VIR_CLASS_NEW(virSomeObject,
virClassForObject)))
return -1;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
