In certain rare occasions qemu can transition a block job which was
already 'ready' into 'standby' and then back. If this happens in the
following order libvirt will get confused about the actual job state:
1) the block copy job is 'ready' (job->state == QEMU_BLOCKJOB_STATE_READY)
2) user calls qemuDomainBlockJobAbort with VIR_DOMAIN_BLOCK_JOB_ABORT_PIVOT
flag but without VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC
3) the block job is switched to synchronous event handling
4) the block job blips to 'standby' and back to 'ready', the event is
not processed since the blockjob is in sync mode for now
5) qemuDomainBlockJobPivot is called:
5.1) 'job-complete' QMP command is issued
5.2) job->state is set to QEMU_BLOCKJOB_STATE_PIVOTING
6) code for synchronous-wait for the job completion in qemuDomainBlockJobAbort
is invoked
7) the waiting loop calls qemuBlockJobUpdate:
7.1) job->newstate is QEMU_BLOCKJOB_STATE_READY due to 4)
7.2) qemuBlockJobEventProcess is called
7.3) the handler for QEMU_BLOCKJOB_STATE_READY overwrites
job->state from QEMU_BLOCKJOB_STATE_PIVOTING to QEMU_BLOCKJOB_STATE_READY
8) qemuDomainBlockJobAbort is looking for a finished job, so waits again
9) qemu finishes the blockjob and transitions it into 'concluded' state
10) qemuBlockJobUpdate is triggered again, this time finalizing the job.
10.1) job->newstate is = QEMU_BLOCKJOB_STATE_CONCLUDED
job->state is = QEMU_BLOCKJOB_STATE_READY
10.2) qemuBlockJobEventProcessConcluded is called, the function
checks whether there was an error with the blockjob. Since
there was no error job->newstate becomes
QEMU_BLOCKJOB_STATE_COMPLETED.
10.3) qemuBlockJobEventProcessConcludedTransition selects the action
for the appropriate block job type where we have:
case QEMU_BLOCKJOB_TYPE_COPY:
if (job->state == QEMU_BLOCKJOB_STATE_PIVOTING && success)
qemuBlockJobProcessEventConcludedCopyPivot(driver, vm, job, asyncJob);
else
qemuBlockJobProcessEventConcludedCopyAbort(driver, vm, job, asyncJob);
break;
Since job->state is QEMU_BLOCKJOB_STATE_READY,
qemuBlockJobProcessEventConcludedCopyAbort is called.
This patch forbids transitions to QEMU_BLOCKJOB_STATE_READY if the
previous job state isn't QEMU_BLOCKJOB_STATE_RUNNING or
QEMU_BLOCKJOB_STATE_NEW.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1951507
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Future patch will remove MKFS define as we will no longer check it
during compilation.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the tests would fail if the bhyve commands are installed in
different path then /usr/bin. Strip the command path to not depend on
the host environment.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Upstream sheepdog changed collie to dog back in 2013 in version 0.7.0.
Looking into repology that version is no longer used by any distribution
supported by libvirt.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The function in question uses "tc" binary so virnetdevbandwidth feels
like better place for it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of checking for specific error that the binaries are not
available mock the virFindFileInPath function. This way we don't have
to skip these tests on host where the binaries are missing.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will allow us to run tests using firewall on hosts where the mocked
binaries are not available/installed instead of skipping these tests.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Following patches will make this change necessary as we will stop
detecting the full path during compile time.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We always pass DNSMASQ so there is no need for the argument at all.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We always pass DNSMASQ so there is no need for the argument at all.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of removing binaryPath let's drop the function completely as
it is not used anywhere.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of removing binaryPath let's drop the function completely as
it is not used anywhere.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We will never call dnsmasqCapsRefresh() so reflect what actually
happens.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The new enum helpers use a set of flags to modify their behaviour, but
the declared set of flags is semantically confusing:
typedef enum {
VIR_XML_PROP_OPTIONAL = 0, /* Attribute may be absent */
VIR_XML_PROP_REQUIRED = 1 << 0, /* Attribute may not be absent */
Since VIR_XML_PROP_OPTIONAL is declared as 0 any other flag shadows it
and makes it impossible to detect. The functions are not able to detect
a semantic nonsense of VIR_XML_PROP_OPTIONAL | VIR_XML_PROP_REQUIRED and
it's a perfectly valid statement for the compilers.
In general having two flags to do the same boolean don't make sense and
the implementation doesn't fix any shortcomings either.
To prevent mistakes, rename VIR_XML_PROP_OPTIONAL to VIR_XML_PROP_NONE,
so that there's always an enum value used with the calls but it doesn't
imply that the flag makes the property optional when the actual value is
0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As I've pointed out in my review, the negative number wrapping for
unsigned variables is an anti-feature which should not be promoted in
any way.
Remove VIR_XML_PROP_WRAPNEGATIVE which would make it more accessible.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
testUpdateQEMUCaps is called multiple times. Use virQEMUCapsUpdateHostCPUModel
instead of virQEMUCapsInitHostCPUModel to not overwrite (and leak) the
pointers in qemuCaps->kvm.hostCPU and qemuCaps->tcg.hostCPU.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
xmlDocSetRootElement removes the node from its previous document tree,
effectively removing the "<cpu>" node from "<domain>" in virCPUDefParseXML.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The g_path_is_absolute() considers more situations
than just a simply "path[0] == '/'".
Related issue: https://gitlab.com/libvirt/libvirt/-/issues/12
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that the last cleanup task was removed in the previous commit, just
remove the label and return early on error rather than goto cleanup.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This variable was leftover from previous changes but is no longer used.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We only use the virt_type "QEMU" in this tests, so simply hard-code it
in the test function rather than specifying it in the test macro.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We can figure out the appropriate value for 'create' from the command
type, so push that into the test function rather than specifying it in
the test macro.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we have a generic mdevctl command generator, we can unify the
test infrastructure as well.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
These per-command generator functions were only exposed in the header to
allow the commandline generation to be tested. Now that we have a
generic mdevctl command generator, we can get rid of the per-command
wrappers and reduce the noise in the header.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Currently there are dedicated wrappers to construct mdevctl command.
These are mostly fine except for the one that translates both "start"
and "define" commands, only because mdevctl takes the same set of
arguments. Instead, keep the wrappers, but let them call a single
global translator that handles all the mdevctl command differences and
commonalities.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This is not a 1:1 mapping to mdevctl commands because mdevctl doesn't
support a separate 'create' command. mdevctl uses 'start' for both
starting a pre-defined device as well as for creating and starting a new
transient device. The libvirt code will be more readable if we treat
these as separate commands. When we need to actually execute mdevctl,
the 'create' command will be translated into the appropriate 'mdevctl
start' command.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
rather than using short opentions (e.g. "-p 0000:00:02.0"), use long
options everywhere (e.g. "--parent=0000:00:02.0")
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
"start" in libvirt means - "take this object and create an
instance out of it"
"create" in libvirt most of the time means - "take and XML description,
make an object out of it and use it to create an instance"
This gets confusing with mdevctl which uses "start" for both. So, this
patch proposes to use virMdevctlStart in cases where from libvirt's POV
we're starting a defined device (unlike mdevctl). Similarly, use
virMdevctlCreate in scenarios where XML description is passed to
libvirt and a transient device is supposed to be created.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Rather than specifying a UUID string to some test macros, just pass a
filename to an xml definition. This helps work toward unifying the test
macros and making it more maintainable.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
These errors are demoted to debug statements[1] since they're only
intended to be used as return values for public APIs. This makes it
difficult to debug the problem when something goes wrong since no error
message is logged. Switch instead to VIR_ERR_INTERNAL_ERROR so that the
error is logged as expected.
[1] See the implementation of daemonErrorLogFilter() for details:
e2f82a3704/src/remote/remote_daemon.c (L89)
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The calling function will log the error. Just return NULL if a device
cannot be found.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use the new virXMLProp helpers and XPath queries to get rid of the old
style of iteration through element children.
Note that in case of def->blockio.logical_block_size,
def->blockio.physical_block_size and def->rotation_rate the wraparound
behaviour of 'virStrToLong_ui' was _not_ forward ported to the new code
as it makes no sense with the attributes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the appropriate type for the variable and refactor the XML parser to
parse it correctly using virXMLPropEnum.
Changes to other places using switch statements were required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the appropriate type for the variable and refactor the XML parser to
parse it correctly using virXMLPropEnum.
Changes to other places using switch statements were required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unfortunately virDomainSnapshotLocation is declared in snapshot_conf.h
which includes domain_conf.h. To avoid a circular dependency use
'unsigned int' for now.
Use XML parser can use virXMLPropEnum.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the appropriate type for the variable and refactor the XML parser to
parse it correctly using virXMLPropEnum.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the appropriate type for the variable and refactor the XML parser to
parse it correctly using virXMLPropEnum.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
