Commit Graph

3054 Commits

Author SHA1 Message Date
Peter Krempa
9223ebbc85 virsh: cmdBlockcopy: Fix generator of block copy disk XML
In a recent commit I've attempted to rewrite the XML generator to use
virXMLFormatElement instead of manual steps. Unfortunately the commit
had multiple problems resulting in a garbled XML:

1) in certain cases the wrong buffer was used resulting in misplaced
   snippets
2) the child element buffer was improperly set up so sub-elements were
   not indented

This resulted in following XML being generated:

 $ virsh blockcopy cd vda /tmp/test.copy --raw --print-xml
 type='file''/tmp/test.copy'/>
 <driver type='raw'/>
 <disk>
 <source file=</disk>

To fix this we'll generate the '<source>' element in one go and use the
proper buffer for it and other places.

Fixes: 1cd95f858a
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2078274
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-04-25 16:37:05 +02:00
Peter Krempa
69ee066523 virsh: cmdBlockcopy: Add '--print-xml' flag
Useful for knowing how to construct the XML and debugging.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-04-25 16:37:05 +02:00
Peter Krempa
fb4d109648 Correct links to TLS certificate setup page
When the setup of TLS certs was originally split out of
'docs/remote.html' ( df99aa311a ) links refering to it were not
fixed.

Adjust them to point to the correct document.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-04-25 16:33:01 +02:00
Ján Tomko
df757e88fd virsh: fix event registration for single event
Allocate a larger 'data' array than strictly needed
for simplicity and use 'ndata' as the index when
filling it to put the single event at the first unused
place, instead of at its index in the virshDomainEventCallbacks
array.

https://bugzilla.redhat.com/show_bug.cgi?id=2073887

Fixes: c6bb274693
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-04-11 17:03:49 +02:00
Ján Tomko
4f8ae0353f tools: snapshot: remove pointless checks
There's no need to check whether a flag is not set just to set it
in that case.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2022-04-07 12:02:31 +02:00
Nikolay Shirokovskiy
4fba5770d2 tools: support --remove-logs flag on destroing domain
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-04-06 10:48:04 +03:00
Michal Privoznik
5e9d8f094c virsh: Remove any reference of KVM device assignment
The KVM device assignment was removed in v5.7.0-rc1~103 but virsh
and its manpage still mention it. Don't do that.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2022-04-06 09:40:13 +02:00
Amneesh Singh
5d0eeb8cd7 virsh: Provide completer for PCI backend drivers
Related: https://gitlab.com/libvirt/libvirt/-/issues/9
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-04-04 16:30:48 +02:00
Amneesh Singh
4f0480a11c virsh: Provide completer for CPU architectures
Related: https://gitlab.com/libvirt/libvirt/-/issues/9
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-04-04 16:30:44 +02:00
Amneesh Singh
11ad758910 virsh: Provide completer for virtualization types
Related: https://gitlab.com/libvirt/libvirt/-/issues/9
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-04-04 16:30:40 +02:00
Andrea Bolognani
b94239a61e meson: Use dicts to initialize cfg_data objects
Instead of creating an empty object and then setting keys one
at a time, it is possible to pass a dict object to
configuration_data(). This is nicer because it doesn't require
repeating the name of the cfg_data object over and over.

There is one exception: the 'conf' object, where we store values
that are used directly by C code. In that case, using a dict
object is not feasible for two reasons: first of all, replacing
the set_quoted() calls would result in awkward code with a lot
of calls to format(); moreover, since code that modifies it is
sprinkled all over the place, refactoring it would probably
make things more complicated rather than simpler.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2022-04-01 15:33:19 +02:00
Michal Privoznik
d5f81479a6 virsh: Fix integer overflow in allocpages
I've came across an aarch64 system which supports hugepages up to
16GiB of size. However, I was unable to allocate them using
virsh allocpages. This is because cmdAllocpages() uses
vshCommandOptScaledInt(), which scales passed value into bytes,
but since the virNodeAllocPages() expects size in KiB the
variable holding bytes is then divided by 1024. However, the
limit for the biggest value passed to vshCommandOptScaledInt() is
UINT_MAX which is now obviously wrong, as it needs to be UINT_MAX
* 1024.

The same bug is in completer. But here, let's use ULLONG_MAX so
that we don't have to care about it anymore.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-31 14:33:40 +02:00
Michal Privoznik
4aafdf1e1f virsh: Don't open code virshEnumComplete()
Now that we have a function that generates string list for given
enum, let's use that instead of open coding it.

Note, after this there are still some 'candidates' left (e.g,
virshNetworkEventNameCompleter(), or
virshNetworkUpdateCommandCompleter()). These are not converted
because either they don't have a convenient int2str function or
they don't start from the very beginning of the enum.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2022-03-15 13:36:58 +01:00
Michal Privoznik
d2e8718f3a virsh: Introduce virshEnumComplete()
We have plenty of completers which iterate over all values of
given enum and do nothing more than translate every member into
string (using corresponding virXXXTypeToString()).

Introduce a convenience function so that callers can pass just
VIR_XXX_LAST and virXXXTypeToString and the rest is taken care
of.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2022-03-15 13:36:56 +01:00
Michal Privoznik
c21e271d36 virsh: Properly terminate string list in virshDomainInterfaceSourceModeCompleter()
A completer must return a NULL terminated list of strings, which
means that when dealing with enums, it has to allocate one
pointer more than the value of VIR_XXX_LAST. But this is not
honoured in virshDomainInterfaceSourceModeCompleter() leading to
out of bounds read.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2022-03-15 13:36:43 +01:00
Haonan Wang
35ba60be36 virsh: Provide completer for vol-wipe algorithms
Related issue: https://gitlab.com/libvirt/libvirt/-/issues/9

Signed-off-by: Haonan Wang <hnwanga1@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-03-11 09:10:24 +01:00
Michal Privoznik
79c613ec8a virsh: fflush(stdout) after fputs()
We are not guaranteed that the string we are printing onto stdout
contains '\n' and thus that the stdout is flushed. In fact, I've
met this problem when virsh asked me whether I want to edit the
domain XML again (vshAskReedit()) but the prompt wasn't displayed
(as it does not contain a newline character) and virsh just sat
there waiting for my input, I sat there waiting for virsh's
output. Flush stdout after all fputs()-s  which do not flush
stdout.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-10 08:57:31 +01:00
Martin Kletzander
89cc0ffdeb wireshark: Fix dissector for quad types
This uses the right type that is expected to make it work even on platforms
where gint64 != quad_t.

Due to indentation changes it is best to view this patch with -w.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-07 12:37:54 +01:00
Peter Krempa
c7dca225e5 virsh: cmdDesc: Fix logic when '-edit' is used along with 'desc' argument
Historically the use of the '-desc' multiple argument parameter was not
forbidden toghether with '-edit', but use of both together has some
unexpected behaviour. Specifically the editor is filled with the
contents passed via '-desc' but if the user doesn't change the text in
any way virsh will claim that the description was not chaged even if it
differs from the currently set description. Similarly, when the user
would edit the description provided via 'desc' so that it's identical
with the one configured for the domain, virsh would claim that it was
updated:

  # virsh desc cd
  No description for domain: cd
  # EDITOR=true virsh desc cd --edit "test desc"
  Domain description not changed

After the fix:

  # virsh desc cd
  No description for domain: cd
  # EDITOR=true virsh desc cd --edit "test desc"
  Domain description updated successfully
  # EDITOR=true virsh desc cd --edit "test desc"
  Domain description not changed

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:57 +01:00
Peter Krempa
420488790e virsh: domain: Don't use ternaries inside vshPrint/vshError functions
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:57 +01:00
Peter Krempa
b72849ce9d virsh: cmdDesc: Remove unneeded 'cleanup'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:57 +01:00
Peter Krempa
5b811a199d virsh: cmdDesc: Automatically free memory
Decrease scope of variables and use automatic freeing.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:57 +01:00
Peter Krempa
c344784b88 virsh: cmdDesc: Use 'vshTempFile' type to simplify cleanup
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:57 +01:00
Peter Krempa
8c35dcf9fc vsh: Add helper for auto-removing temporary file
The vsh helpers for user-editing of contents use temporary files.
Introduce 'vshTempFile' type which automatically removes the file.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:56 +01:00
Peter Krempa
a3ef5414ed virsh: cmdDesc: Use separate flags variable for getters
The getters have a different set of flags. Add a variable for the getter
to avoid having to construct flags when calling the getter.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:56 +01:00
Peter Krempa
2337098b63 virsh: cmdSchedinfo: Add separate variable for holding flags used for query
Instead of having two ad-hoc places which decide whether the original
flags can be used add another variable specifically for flags used for
query.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:56 +01:00
Peter Krempa
82217a2c7b virshGetOneDisplay: Refactor formatting of URI params
Unconditionally format the start of the query ('?') and make delimiters
('&') part of the arguments. At the end we can trim off 1 char from the
end of the buffer unconditionally.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:56 +01:00
Peter Krempa
3c73ed7300 virshGetOneDisplay: Don't reuse 'xpath' variable
Add autofreed per-xpath variables to simplify the code.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:56 +01:00
Peter Krempa
d6574a0d2b virshGetOneDisplay: Automaticaly free extracted data
Use automatic memory freeing for the temporary variables holding the
data extracted from the XML.

The code in this function was originally extracted from a loop so we can
also drop pre-clearing of the pointers.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:56 +01:00
Peter Krempa
bdc9269b99 virsh: cmdDomDisplay: Remove unneeded 'cleanup' label
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:56 +01:00
Peter Krempa
364b4f0a0d virsh: cmdDomDisplay: Extract loop body fetching display URIs into 'virshGetOneDisplay'
Separate the code so that the function is not as massive. Note that this
is a minimal extraction which does not clean up the code meant for
looping.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:56 +01:00
Peter Krempa
c6bb274693 virsh: cmdEvent: Rewrite questionable event registration
The code registering the event handlers in 'cmdEvent' had too many
blocks of code conditional on whether just one event is being listened
to or all events.

The code can be greatly simplified by uniting the code paths and having
only one branch when filling the list of events we want to listen for.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:56 +01:00
Peter Krempa
ea3e64fefd virsh: Move 'cmdEvent' and all of its machinery to virsh-domain-event.c
'cmdEvent' along with all the helper functions it needs is ~950 LOC.
Move it out from virsh-domain.c to virsh-domain-event.c along with the
completer function so that the new module doesn't have to expose any new
types.

Semantically this creates a new category in 'virsh help' but all other
behaviour stays the same.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:56 +01:00
Peter Krempa
c704d27d4a virsh: Move 'virshDomainBlockJobToString' to virsh-util
The helper function is used in virshBlockJobInfo and also in the
callbacks of cmdEvent. Upcoming patch is going to move out the event
code into a helper so this needs to be in a shared place.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:56 +01:00
Peter Krempa
bf9de8cb51 virshEventPrint: Use automatic memory clearing
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:56 +01:00
Peter Krempa
8500571466 virsh: Use NULLSTR_EMPTY instead of ternary operator
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:56 +01:00
Peter Krempa
34244cc20d virsh: virshVcpuinfoPrintAffinity: Use if-else instead of ternary operator
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:56 +01:00
Peter Krempa
3a00632667 virsh: cmdRestore: Use if-else instead of ternary operator
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:56 +01:00
Peter Krempa
8c383ea960 virsh: doSave: Use if-else instead of ternary operator
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:56 +01:00
Peter Krempa
38b600166f virsh: cmdStart: Rewrite ternary operator use to standard if conditions
Rewrite the invocation of the virDomainCreate(WithFiles/Flags) APIs
based on the arguments into if-else instead of (nested) ternary
operators.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:56 +01:00
Peter Krempa
1cd95f858a virsh: cmdBlockcopy: Use virXMLFormatElement
Rewrite the formatting of the block copy target xml using
virXMLFormatElement.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-03 11:06:56 +01:00
Peter Krempa
44ea7749f8 virsh: Require option name for '--pass-fd' argument of 'qemu-monitor-command'
Require the option name for this argument as otherwise a part of the
'cmd' argument will be claimed.

Fixes: 43edde82af
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2022-03-01 14:29:39 +01:00
Peter Krempa
43edde82af virsh: Implement support for virDomainQemuMonitorCommandWithFiles
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-01 13:29:49 +01:00
Martin Kletzander
4e42686ade Make systemd unit ordering more robust
Since libvirt-guests script/service can operate on various URIs and we do
support both socket activation and traditional services, the ordering should be
specified for all the possible sockets and services.

Also remove the Wants= dependency since do not want to start any service.  We
cannot know which one libvirt-guests is configured, so we'd have to start all
the daemons which would break if unused colliding services are not
masked (libvirtd.service in the modular case and all the modular daemon service
units in the monolithic scenario).  Fortunately we can assume that the system is
configured properly to start services/sockets that are of interest to the user.
That also works with the setup described in https://libvirt.org/daemons.html .

To make it even more robust we add the daemon service into the machine units
created for individual domains as it was missing there.

https://bugzilla.redhat.com/show_bug.cgi?id=1868537

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-02-22 13:35:47 +01:00
Hyman Huang(黄勇)
72e60ddf1b virsh: Add mode option to domdirtyrate-calc virsh api
Extend domdirtyrate-calc virsh api with mode option, either
of these three options "page-sampling,dirty-bitmap,dirty-ring"
can be specified when calculating dirty page rate.

Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-02-21 13:34:16 +01:00
Peter Krempa
d2bc5a04c0 virsh-domain: Move and rename cmdStartGetFDs to virshFetchPassFdsList
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-02-17 15:53:58 +01:00
Peter Krempa
b0015df263 cmdStartGetFDs: Modernize
Calculate the length of the FD list beforehand to avoid multiple
expansions and mainly simplify the code and use automatic freeing to
remove the error code path.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-02-17 15:53:58 +01:00
Peter Krempa
654486bd57 syntax-check: sc_avoid_write: Don't use blanket file exceptions
Adding an exception for the whole file usually defeats the purpose of a
syntax check and is also likely to get forgotten once the file is
removed.

In case of the suggestion of using 'safewrite' instead of write even the
comment for safewrite states that the function needs to be used only in
certain cases.

Remove the blanket exceptions for files and use an exclude string
instead. The only instance where we keep the full file exception is for
src/libvirt-stream.c as there are multiple uses in example code in
comments where I couldn't find a nicer targetted wapproach.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-02-15 09:32:23 +01:00
Tim Wiederhake
883cd98498 tools: Use automatic mutex management
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-02-11 16:03:29 +01:00
Daniel P. Berrangé
7904e521b2 tools: add --reset-nvram arg to several virsh commands
This wires up support for resetting NVRAM for all APIs that allow
this feature.

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2022-02-08 13:04:20 +00:00
Michal Privoznik
87a43a907f lib: Use g_clear_pointer() more
This change was generated using the following spatch:

  @ rule1 @
  expression a;
  identifier f;
  @@
    <...
  - f(*a);
    ... when != a;
  - *a = NULL;
  + g_clear_pointer(a, f);
    ...>

  @ rule2 @
  expression a;
  identifier f;
  @@
    <...
  - f(a);
    ... when != a;
  - a = NULL;
  + g_clear_pointer(&a, f);
    ...>

Then, I left some of the changes out, like tools/nss/ (which
doesn't link with glib) and put back a comment in
qemuBlockJobProcessEventCompletedActiveCommit() which coccinelle
decided to remove (I have no idea why).

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-02-08 08:42:07 +01:00
Ján Tomko
8eb7d869ed virParseVersionString: rename to virStringParseVersion
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
2022-02-03 14:10:03 +01:00
Ján Tomko
d248e3dca8 virsh: domsetlaunchsecstate: report error if no options are passed
We already exit if they are not present.

Report an error, but do not mark them as required in case a future
version of this command will want to accept a different set of
parameters.

https://bugzilla.redhat.com/show_bug.cgi?id=2046024

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-01-31 13:38:11 +01:00
Michal Privoznik
ec7fbdef56 virsh-network: Don't check for virshXXXTypeFromString() >= VIR_XXX_LAST
They way our VIR_ENUM_IMPL() and virXXXTypeFromString() work is
that for any string that's not recognized a negative one is
returned. And, since VIR_XXX_LAST is passed to VIR_ENUM_IMPL() we
can be sure that all enum members are covered. Therefore, there
is no way that virXXXTypeFromString() can return a value that's
bigger or equal to VIR_XXX_LAST.

I've noticed two places where such comparison was made, both in
cmdNetworkUpdate(). Drop them.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2022-01-19 16:48:33 +01:00
Michal Privoznik
d724ca8fcd virsh: Introduce net-update --section completer
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-01-19 16:48:33 +01:00
Michal Privoznik
687d6f1d7b virsh: Introduce net-update --command completer
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-01-19 16:48:33 +01:00
Olaf Hering
8eb4461645 remove sysconfig files
sysconfig files are owned by the admin of the host. They have the
liberty to put anything they want into these files. This makes it
difficult to provide different built-in defaults.

Remove the sysconfig file and place the current desired default into
the service file.

Local customizations can now go either into /etc/sysconfig/name
or /etc/systemd/system/name.service.d/my-knobs.conf

Attempt to handle upgrades in libvirt.spec.
Dirty files which are marked as %config will be renamed to file.rpmsave.
To restore them automatically, move stale .rpmsave files away, and
catch any new rpmsave files in %posttrans.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2022-01-17 18:20:59 +01:00
Jim Fehlig
161727417a docs: Add man page for libvirt-guests
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2022-01-17 18:20:55 +01:00
Jim Fehlig
3be5ba11a2 build: Only install libvirt-guests when building libvirtd
libvirt-guests was already moved to the libvirt daemon package in commit
d800c50349. It only needs to be installed when building libvirtd.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2022-01-17 18:20:52 +01:00
Michal Privoznik
364cf32e57 virsh: Remove needless labels
There are few places where a cleanup label contains nothing but a
return statement. Drop such labels and return directly.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-01-17 09:53:45 +01:00
Jim Fehlig
3fc65ae9e2 tools: Add domsetlaunchsecstate virsh command
After attesting a domain with the help of domlaunchsecinfo,
domsetlaunchsecstate can be used to set a secret in the guest
domain's memory prior to running the vcpus.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2022-01-04 10:56:00 -07:00
Boris Fiuczynski
354644feb4 virt-host-validate: Fix IOMMU output on S390
Commit 93e9e92c1e eliminated the option for skipping but left code in
the s390 check which makes use of a skip. This leads to an output
without result destroying the correct format. e.g.

  QEMU: Checking for hardware virtualization                                 : PASS
  QEMU: Checking if device /dev/kvm exists                                   : PASS
  QEMU: Checking if device /dev/kvm is accessible                            : PASS
  QEMU: Checking if device /dev/vhost-net exists                             : PASS
  QEMU: Checking if device /dev/net/tun exists                               : PASS
  QEMU: Checking for cgroup 'cpu' controller support                         : PASS
  QEMU: Checking for cgroup 'cpuacct' controller support                     : PASS
  QEMU: Checking for cgroup 'cpuset' controller support                      : PASS
  QEMU: Checking for cgroup 'memory' controller support                      : PASS
  QEMU: Checking for cgroup 'devices' controller support                     : PASS
  QEMU: Checking for cgroup 'blkio' controller support                       : PASS
  QEMU: Checking for device assignment IOMMU support                         :   QEMU: Checking for secure guest support                                    : PASS

Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-12-17 16:34:20 +01:00
Michal Privoznik
5ce184f33c vsh-table: Ensure NULL terminated arguments to vshTable*()
There are two functions that take variable arguments:
vshTableNew() and vshTableRowAppend(). Both expect the list of
arguments to be NULL terminated. Annotate them with
G_GNUC_NULL_TERMINATED to enable compile time check for this.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-12-17 15:05:58 +01:00
Michal Privoznik
2ac0e4c347 vsh-table.h: Modernize declarations
Use modern style of function declarations where the return type
and function name are on two separate lines.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-12-17 15:05:54 +01:00
Michal Privoznik
74c6c8e679 vsh-table: Hide vshTableRow typedef
There's no need for any caller to know vshTableRow typedef.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-12-17 15:05:49 +01:00
Michal Privoznik
dfd1ffc544 virsh-completer: Provide completer for numatune --mode
The completer is trivial, just iterate over
virDomainNumatuneMemMode enum and convert each integer into its
string comrade.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-12-17 13:18:42 +01:00
Michal Privoznik
de617ce96b admin: Build only when RPC is available
The admin module is very closely tied to RPC. If we are
building without RPC support there's not much use for the
admin module, in fact it fails to build.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-12-15 12:12:44 +01:00
Daniel P. Berrangé
719bb0bf23 tools: add 'nodesevinfo' virsh command
While some SEV info is reported in the domain capabilities,
for reasons of size, this excludes the certificates. The
nodesevinfo command provides the full set of information.

Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-12-14 16:04:17 +00:00
Daniel P. Berrangé
ac79e9ff5c tools: add 'domlaunchsecinfo' virsh command
This command reports the launch security parameters for
a guest, allowing an external tool to perform a launch
attestation.

Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-12-14 16:04:17 +00:00
Andrea Bolognani
00c4dd794a nss: Use shared_library() for nss_libvirt_lib
shared_module() is intended for shared objects that are
loaded at runtime using dlopen() whereas NSS plugins need to
be full-fledged shared libraries with, among other things, a
proper SONAME.

Meson seems to have become more strict about this recently,
because libnss_libvirt.so.2 gets a SONAME when I build it with
Meson 0.59.4 on Fedora 34 but doesn't when I use Meson 0.60.2
on Debian testing instead.

Either way, shared_library() was always the right function
to use for NSS plugins.

Fixes: 36780c9319
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-12-13 14:17:56 +01:00
Peter Krempa
78db8bf006 virt-host-validate-qemu: Use automatic memory freeing for virBitmap
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-12-10 16:37:42 +01:00
Peter Krempa
68919edb3b virt-host-validate-common: Use automatic memory freeing for virBitmap
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-12-10 16:37:42 +01:00
Peter Krempa
33eb88cdc9 virshParseCPUList: Refactor cleanup
Use automatic memory freeing for the temporary bitmap and remove the
pointless 'cleanup' section.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-12-10 16:36:24 +01:00
Peter Krempa
51d1c08fe9 virDomainMigrate: Introduce VIR_MIGRATE_NON_SHARED_SYNCHRONOUS_WRITES flag
Non-shared storage migration of guests which are disk I/O intensive and
have fast local storage may actually never converge if the guest happens
to dirty the disk faster than it can be copied.

This patch introduces a new flag
'VIR_MIGRATE_NON_SHARED_SYNCHRONOUS_WRITES' which will instruct
hypervisors to synchronize local I/O writes with the writes to remote
storage used for migration so that the guest can't overwhelm the
migration. This comes at a cost of decreased local I/O performance for
guests which behave well on average.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-12-07 09:00:39 +01:00
Peter Krempa
b54c313c33 virDomainBlockCopy: Introduce VIR_DOMAIN_BLOCK_COPY_SYNCHRONOUS_WRITES flag
In cases when the destination storage is slower than the normal VM
storage and the VM does intensive I/O to the disk a block copy job may
never converge.

Switching it to synchronous mode will ensure that all writes done by the
guest are propagated to the destination at the cost of slowing down I/O
of the guest to the synchronous speed.

This patch adds the new API flag and implements virsh support.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-12-07 09:00:39 +01:00
Daniel P. Berrangé
e674218dc2 tools: fix iterating over argv when recovering xattr
The libvirt_recover_xattrs.sh tool hangs when run. When no flags
are provided OPTIND is 1, so the loop expands to 'shift 0' which
has not effect. Rewrite to just loop over $@ instead which involves
less cleverness.

Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-11-30 10:45:35 +00:00
Michal Privoznik
010613cfd8 wireshark: Drop needless comment in dissect_xdr_bytes()
In the dissect_xdr_bytes() there's a comment that the string
allocated by xdr_bytes() can't be freed using xdr_free(). Well,
that is expected because xdr_bytes() used plain calloc() AND the
string is not an XDR struct but plain 'char *' type. Passing it
to xdr_free() must result in weird things happening.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
2021-11-29 15:05:43 +01:00
Michal Privoznik
7e299ba649 wireshark: Switch to tvb_bytes_to_str()
When the dissector sees a byte sequence that is either an opaque
data (xdr_opaque) or a byte sequence (xdr_bytes) it formats the
bytes as a hex numbers using our own implementation. But
wireshark already provides a function for it: tvb_bytes_to_str().
NB, the reason why it returns a const string is so that callers
don't try to free it - the string is allocated using an allocator
which will decide when to free it.

The wireshark formatter was introduced in wireshark commit of
v1.99.2~479 and thus is present in the version we require at
least (2.6.0).

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
2021-11-29 15:05:33 +01:00
Ján Tomko
097d3a4f56 tools: virt-host-validate: fix memory leak
virHostValidateGetCPUFlags returns an allocated virBitmap and
it needs to be freed.

Fixes: a0ec7165e3
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristína Hanicová <khanicov@redhat.com>
2021-11-23 16:59:36 +01:00
Koichi Murase
097296c30b bash-completion: fix variable leaks of "IFS" and "word"
Signed-off-by: Koichi Murase <myoga.murase@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-11-23 13:35:36 +01:00
Martin Kletzander
0ac13b189f virsh: Do not try connecting first time without polkit agent
Trying to connect once without a polkit agent will generate an error on the
server side which seems too rough given it only serves the purpose of the client
(virsh in this case) to figure out that an agent is needed.  Thankfully we can
just try running the agent.  It does not break anything as we are running it
with `--fallback`, which makes sure it does not replace an existing agent in
case there is one already registered.

The second piece of code trying to start the polkit text agent is kept in order
to _really_ try out starting the agent (and error out when failing to do so)
just in case the agent was not available the first time it was ran.  Even though
it should not happen it avoids a very rare race condition and really does not
add much complexity.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1945501

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-11-23 12:51:09 +01:00
Martin Kletzander
e20ad73780 virsh: Remove needless variable
It only redundantly reflects whether pkagent != NULL.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-11-23 12:51:09 +01:00
Michal Privoznik
784e9e2b62 lib: Drop needless one line labels
In some cases we have a label that contains nothing but a return
statement. The amount of such labels rises as we use automagic
cleanup. Anyway, such labels are pointless and can be dropped.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2021-11-22 12:39:59 +01:00
Peter Krempa
813ee9fb62 virsh: domain: Replace virJSONValueObjectCreate by virJSONValueObjectAdd
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-11-17 12:04:11 +01:00
Michal Privoznik
842cfc9d41 virsh: Remove unnecessary else branches
In a few cases we call a public API, wrapped in an if() statement
with both branches written out explicitly. The error branch jumps
onto cleanup label, while the successful prints out a message.
Right after these ifs there's 'ret = true;' and the cleanup
label. The code is a bit more readable if only the error branch
is kept and printing happens at the same level as setting the ret
variable.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristína Hanicová <khanicov@redhat.com>
2021-11-12 17:17:19 +01:00
Martin Kletzander
9715043544 tools: Add virt-pki-query-dn binary
With this program we do not have to depend on the output of `certtool -i`, which
changed the order of the fields at some point and the newest version is
incompatible with what libvirt expects in tls_allowed_dn_list configuration
option.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2021-11-12 12:37:29 +01:00
Michal Privoznik
7c2a4e84b7 Prefer g_auto(GStrv) over g_strfreev()
There are a few cases where a string list is freed by an explicit
call of g_strfreev(), but the same result can be achieved by
g_atuo(GStrv).

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
2021-11-11 16:16:17 +01:00
zhanglei
c6d009620a virsh: add interface information to guestinfo command
The new parameter group returns information about network interfaces

Signed-off-by: zhanglei <zhanglei@smartx.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2021-11-05 13:38:40 +01:00
Han Han
6f31f3c9a0 virsh: Fix ambiguous output in metadata-change event
When you set metadata with type element like the following:
dom.setMetadata(libvirt.VIR_DOMAIN_METADATA_ELEMENT, "<test/>", 'abc', "HAHAH", 0)

Then for `virsh event --all`, then it will output this message:
event 'metadata-change' for domain 'rhel9': element HAHAH

The message is ambiguous since it looks like the params for
metadata-change event is the element HAHAH. Actually that means the type is
element while the url is HAHAH. Let's make it more clear.

Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-11-01 17:00:41 +01:00
Dmitrii Shcherbakov
3954378d06 Add PCI VPD Capability Support
* XML serialization and deserialization of PCI VPD;
* PCI VPD capability flags added and used in relevant places;
* XML to XML tests for the added capability.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
2021-10-21 17:34:04 +01:00
Peter Krempa
289aa4bc5b virsh: Add QMP command wrapping for 'qemu-monitor-command'
Issuing simple QMP commands is pain as they need to be wrapped by the
JSON wrapper:

 { "execute": "COMMAND" }

and optionally also:

 { "execute": "COMMAND", "arguments":...}

For simple commands without arguments we can add syntax sugar to virsh
which allows simple usage of QMP and additionally prepares also for
passing through of the 'arguments' section:

 virsh qemu-monitor-command $VM query-status

is equivalent to

 virsh qemu-monitor-command $VM '{"execute":"query-status"}'

and

 virsh qemu-monitor-command $VM query-named-block-nodes '{"flat":true}'
 or
 virsh qemu-monitor-command $VM query-named-block-nodes '"flat":true'

is equivalent to

 virsh qemu-monitor-command $VM '{"execute":"query-named-block-nodes", "arguments":{"flat":true}}'

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-10-18 16:04:17 +02:00
Praveen K Paladugu
a0ec7165e3 tools: add virt-host-validate-ch for ch driver
Signed-off-by: Wei-Chen Chen <weicche@microsoft.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-10-12 17:28:35 +02:00
Jim Fehlig
3f9c1a4bb8 tools: Fix virt-host-validate SEV detection
virt-host-validate checks if AMD SEV is enabled by verifying
/sys/module/kvm_amd/parameters/sev is set to '1'. On a system
running kernel 5.13, the parameter is reported as 'Y'. To be
extra paranoid, add a check for 'y' along with 'Y' to complement
the existing check for '1'.

Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1188715

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2021-10-06 11:23:24 -06:00
Andrea Bolognani
001a101a2e tools: Fix typo firemare -> firmware
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
2021-10-06 11:14:07 +02:00
Michal Privoznik
1b2e06b1bf virsh: Use VIR_AUTOCLOSE more
There are few places where we can replace explicit
VIR_FORCE_CLOSE() with VIR_AUTOCLOSE annotation.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-10-06 09:28:19 +02:00
Michal Privoznik
f427e6c643 virsh: Add wrapper for virStreamFree
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-10-06 09:27:43 +02:00
Michal Privoznik
d39bd3998e virsh: Add wrapper for virNWFilterFree
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-10-06 09:27:03 +02:00
Michal Privoznik
40a3a5b608 virsh: Add wrapper for virNodeDeviceFree
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-10-06 09:26:25 +02:00
Michal Privoznik
db4df06533 virsh: Add wrapper for virNetworkFree
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-10-06 09:25:47 +02:00
Michal Privoznik
717b6549d5 virsh: Add wrapper for virStorageVolFree
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-10-06 09:25:22 +02:00
Michal Privoznik
663a29f42e virsh: Add wrapper for virStoragePoolFree
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-10-06 09:24:17 +02:00
Michal Privoznik
f8fb5be6c8 virsh: Add wrapper for virInterfaceFree
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-10-06 09:23:25 +02:00
Michal Privoznik
0c43fcddf2 virsh-util.h: Fix ordering of virshXXXFree functions
Currently the order of virshXXXFree functions in the header file
does not correspond to the order in the corresponding .c file.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-10-06 09:20:45 +02:00
Michal Privoznik
3ad0690015 virsh: Fix --nvram and --keep-nvram help strings
The --nvram and --keep-nvram options of the undefine command can
be used regardless of the domain status (the only consumer so far
- qemuDomainUndefineFlags() doesn't care about the domain
status). Yet, their corresponding help strings say something
about inactive domains while manpage says nothing. Remove the
reference to domain state.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2007659
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2021-10-05 08:54:32 +02:00
Tim Wiederhake
4ad3c95f4b vshCmddefCheckInternals: Fix typo
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-10-01 13:12:23 +02:00
Michal Privoznik
f72e4edf50 virsh: Introduce update-memory-device command
New 'update-memory-device' command is introduced which aims on
making it user friendly to change <memory/> device. So far I just
need to change <requested/> so I'm introducing --requested-size
only; but the idea is that this is extensible for other cases
too. For instance, want to change <myElement/>? A new
--my-element argument can be easily introduced.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-10-01 11:05:05 +02:00
Michal Privoznik
9985f62b51 qemu: Wire up MEMORY_DEVICE_SIZE_CHANGE event
As advertised in previous commit, this event is delivered to us
when virtio-mem module changes the allocation inside the guest.
It comes with one attribute - size - which holds the new size of
the virtio-mem (well, allocated size), in bytes.
Mind you, this is not necessarily the same number as 'requested
size'. It almost certainly will be when sizing the memory up, but
it might not be when sizing the memory down - the guest kernel
might be unable to free some blocks.

This current size is reported in the domain XML as an output
element only.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-10-01 11:04:47 +02:00
Kristina Hanicova
49d74124a5 virsh: domain: remove else branch
I removed else branches after return/break as they are not
necessary and the code looks cleaner without them.

Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-25 09:30:53 +02:00
Kristina Hanicova
bd82e3d81a virsh: domain: remove 'ret' variable and use 'count' instead
This patch also includes use of an early return in case of an
error. I think the changes make the functions more readable.

Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-25 09:30:43 +02:00
Kristina Hanicova
24ddb0cdfe virsh: domain: use early return when possible
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-25 09:30:09 +02:00
Kristina Hanicova
6e1cdf928c virsh: domain: remove 'ret' variable, use early return when possible
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-25 09:28:51 +02:00
Kristina Hanicova
9a5db04fe6 virsh: domain: remove 'ret' variable and use direct return when possible
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-25 09:28:45 +02:00
Kristina Hanicova
a1fe822801 virsh: domain: remove nested 'if' in cmdAttachDisk()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-25 09:27:34 +02:00
Kristina Hanicova
14a804ee67 virsh: domain: use early return in virshDomainDefine()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-25 09:25:56 +02:00
Kristina Hanicova
bc7b8a34fa virsh: domain: remove unnecessary variable and label in cmdMigrateSetMaxDowntime()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-25 09:16:30 +02:00
Kristina Hanicova
0987edbedf virsh: domain: fix mistake in cmdMigrateSetMaxDowntime()
If there was added a new return value indicating success to the
function virDomainMigrateSetMaxDowntime() in the future, because
of the way the function is called it would be treated it as an
error state and would return false (indicating failure). This
patch fixes it, so that the call of the function follows the same
pattern as is currently set in libvirt.

Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-25 09:14:56 +02:00
Michal Privoznik
bf9074c6a8 vsh: Don't check for OOM in vshGetTypedParamValue()
Both function description and function itself mention check for
OOM which can't happen really. There was a bug in glib where
g_strdup_*() might have not aborted on OOM, but we have our own
implementation when dealing with broken glib (see
vir_g_strdup_printf()). Therefore, checking for OOM is redundant
and can never be true.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-09-24 12:40:48 +02:00
Kristina Hanicova
71cc4aacc2 virsh: util: remove 'else' branch after return
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-24 09:58:07 +02:00
Kristina Hanicova
45b17385e7 virsh: remove variable 'ret' and 'inactive'
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-24 09:58:06 +02:00
Kristina Hanicova
409ccebcaa virsh: remove variable 'ret' in cmdVersion()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-24 09:58:04 +02:00
Kristina Hanicova
28051aaa9b virsh: remove variable 'ret' and use early return if possible
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-24 09:58:01 +02:00
Kristina Hanicova
978a124659 virsh: volume: refactor cmdVolInfo()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-24 09:52:42 +02:00
Kristina Hanicova
096da894cd virsh: host: refactor cmdNodeCpuStats()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-24 09:52:42 +02:00
Kristina Hanicova
21a0019392 virsh: host: refactor cmdFreecell()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-24 09:52:42 +02:00
Kristina Hanicova
ba78db1f73 virsh: domain: refactor cmdLxcEnterNamespace()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-24 09:52:42 +02:00
Kristina Hanicova
637d98b329 virsh: domain: refactor virshCPUCountCollect()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-24 09:52:42 +02:00
Kristina Hanicova
e31502544c virsh: domain: refactor cmdSchedinfo()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-24 09:52:42 +02:00
Michal Privoznik
b480a5cb5c vsh: Ensure that bool --options don't have completer
Let's check whether a boolean --option doesn't have completer or
completer_flags set. These options are just flags and don't
accept any value, thus they can't have any completer.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-09-21 10:20:41 +02:00
Michal Privoznik
a1a22b0b1c vsh: Extend checks for aliased commands
If a command is an alias, then it can only have .name, .flags and
.alias set and .flags should contain just VSH_CMD_FLAG_ALIAS.
Check if that's the case in self-test.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-09-21 10:20:41 +02:00
Michal Privoznik
520e858a8d virsh: Provide local path completer for vol-download --file
The vol-download command takes mandatory --file argument which
points to a local (possibly non-existent) path. If the file
exists then it's overwritten. Set the argument's completer so
that self-test doesn't report it as missing.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-09-21 10:20:41 +02:00
Michal Privoznik
8eefc7afc8 virsh: Provide local path completer for screenshot --file
The screenshot command takes optional --file argument which can
point to an existing local path (in which case the file is
overwritten). Set the argument's completer so that self-test
doesn't report it as missing.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-09-21 10:20:41 +02:00
Kristina Hanicova
19b77df5cc tools: virsh-snapshot: refactor small functions
This patch includes:
* removal of dead code
* simplifying nested if conditions
* removal of unnecessary variables
* usage of "direct" boolean return

Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-20 09:35:22 +02:00
Peter Krempa
9d26af5e5b vsh: Move 'vshReadlineOptionsGenerator' out of '#if WITH_READLINE'
It's now also used in vshCompleteHelpCommand which is outside of the
conditionally compiled code.

Fixes: 80f70c74a7
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2021-09-17 11:00:13 +02:00
Peter Krempa
c580c8db70 virsh-completer: Provide completer for '--top' and '--base' for blockjobs
Complete with the indexed targets (e.g. vda[3]) based on existing
indexes.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
071bab399a virsh: Introduce virshCompleteEmpty and use it for places where we can't suggest anything
For now this serves just as an annotation because readline and also the
bash completion script insist on completing local paths when an empty
list is returned.

This will serve for future reference once we'll be able to properly
refuse to suggest anything.

The completer is used for fields such as names for new objects,
description strings, password strings etc, URIs and hostnames which we
can't feasibly autocomplete.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
2732d81984 virsh: Use 'virshCompletePathLocalExisting' for options reading local files
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
16252b16b7 virsh: completer: Introduce dummy completer for local files
For now the completion does the correct thing of completing a local path
if NULL is returned.

Introduce 'virshCompletePathLocalExisting' and use it in the
'VIRSH_COMMON_OPT_FILE' macro.

This for now serves as an annotation for the function which want to read
a file on the host running virsh. In the future this can be used with a
more sophisticated implementation.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
bc4739ed77 virsh: Expand VIRSH_COMMON_OPT_FILE for cases when it's not a local file used by virsh
In cases such as the APIs for managed save management, the file path
provided via the '--file' option is passed to the API.

We'll need to make them distinct from cases for when virsh is using the
file so that different completers can be used.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
119b139c76 virsh: Provide completers for options taking comma separated list of disk targets
'--storage' of the 'undefine' command and '--migrate-disks' of the
'migrate' command take a list of disk targets as an argument.

We can simply combine 'virshDomainDiskTargetCompleter' with
'virshCommaStringListComplete' to provide the completions.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
80f70c74a7 vsh: Add completer for '--command' of 'help' command
Wrap 'vshReadlineCommandGenerator' into a function with proper prototype
to provide a completer for the help command.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
f20512c414 virsh: Use 'virshStoragePoolNameCompleter' for two options
'--pool' of the 'pool-event' command and '--inputpool' of
'vol-create-from' use the above mentioned completer.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
573385dc9c virsh-snapshot: Use 'virshSnapshotNameCompleter' for '--from' of 'snapshot-list'
When listing a snapshot tree, the '--from' option takes a name of a
snapshot to limit the subset. Use virshSnapshotNameCompleter as
completer for the option.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
8f5b8fac33 vsh: Introduce '--completers-missing' for 'self-test' command
Make it simple to spot which options of which commands are missing
autocompletion functions by introducing this hidden option.

In the future when we'll have completers for everything this can be also
used as a hard fail so that completers are always added.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
7f72ed0707 vshCmddefCheckInternals: Sanitize command alias validation
We don't need to validate the real command twice, but it's better to
check that the real command name exists and it's not an alias to prevent
loops.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
1726c572a2 virsh: Remove hack using 'VSH_CMD_FLAG_ALIAS' to hide virsh commands
Introduce a proper flag 'VSH_CMD_FLAG_HIDDEN' for hiding commands from
output so that we can validate that there aren't any loops or
misconfigured commands.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
4402bff1ec virsh-completer*.h: Use modern header style
Prevent the need to edit the function declarations to put them into the
header. There was even inconsistent use.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
6246bc6601 virshCheckpointNameCompleter: Sanitize forward declaration use
Include the proper header instead of duplicating the declaration.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Jiri Denemark
88810c5267 virsh: Make code flow in cmdManagedSaveRemove more straightforward
By doing so we can get rid of the code which violates our coding style
guidelines.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-09-16 16:47:54 +02:00
Kristina Hanicova
4d31c02f05 virsh: add support for '--validate' option in create network
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-16 16:26:18 +02:00
Kristina Hanicova
ceb0d2b71a tools/virsh-pool: refactor smaller functions
I think these functions look much more readable with just simple
if conditions.

Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-16 15:25:42 +02:00