The QEMU -drive id= begins with libvirt's QEMU host drive prefix
("drive-"), which is stripped off in several places two convert between
host ("-drive") and guest ("-device") device names.
In the case of BlkIoTune it is unnecessary to strip the QEMU host drive
prefix because we operate on "info block"/"query-block" output that uses
host drive names.
Stripping the prefix incorrectly caused string comparisons to fail since
we were comparing the guest device name against the host device name.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 04ee70bfda)
dnsmasq is forwarding a number of queries upstream that should not
be done. There still remains an MX query for a plain name with no
domain specified that will be forwarded is dnsmasq has --domain=xxx
--local=/xxx/ specified. This does not happen with no domain name
and --local=// ... not a libvirt problem.
BTW, thanks again to Claudio Bley!
(cherry picked from commit f3868259ca)
Conflicts:
AUTHORS
Recently the Ceph project defaulted auth_supported from 'none' to 'cephx'.
When no auth information was set for Ceph disks this would lead to librados defaulting to
'cephx', but there would be no additional authorization information.
We now explicitly set auth_supported to none when passing down arguments to Qemu.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
(cherry picked from commit ccb9478500)
(crobinso: Add Wido to AUTHORS)
QEMU (and librbd) flush the cache on the source before the
destination starts, and the destination does not read any
changeable data before that, so live migration with rbd caching
is safe.
This makes 'virsh migrate' work with rbd and caching without the
--unsafe flag.
Reported-by: Vladimir Bashkirtsev <vladimir@bashkirtsev.com>
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
(cherry picked from commit 78290b1641)
Hello,
This is a patch to fix vm's outbound traffic control problem.
Currently, vm's outbound traffic control by libvirt doesn't go well.
This problem was previously discussed at libvir-list ML, however
it seems that there isn't still any answer to the problem.
http://www.redhat.com/archives/libvir-list/2011-August/msg00333.html
I measured Guest(with virtio-net) to Host TCP throughput with the
command "netperf -H".
Here are the outbound QoS parameters and the results.
outbound average rate[kilobytes/s] : Guest to Host throughput[Mbit/s]
======================================================================
1024 (8Mbit/s) : 4.56
2048 (16Mbit/s) : 3.29
4096 (32Mbit/s) : 3.35
8192 (64Mbit/s) : 3.95
16384 (128Mbit/s) : 4.08
32768 (256Mbit/s) : 3.94
65536 (512Mbit/s) : 3.23
The outbound traffic goes down unreasonably and is even not controled.
The cause of this problem is too large mtu value in "tc filter" command run by
libvirt. The command uses burst value to set mtu and the burst is equal to
average rate value if it's not set. This value is too large. For example
if the average rate is set to 1024 kilobytes/s, the mtu value is set to 1024
kilobytes. That's too large compared to the size of network packets.
Here libvirt applies tc ingress filter to Host's vnet(tun) device.
Tc ingress filter is implemented with TBF(Token Buckets Filter) algorithm. TBF
uses mtu value to calculate the amount of token consumed by each packet. With too
large mtu value, the token consumption rate is set too large. This leads to
token starvation and deterioration of TCP throughput.
Then, should we use the default mtu value 2 kilobytes?
The anser is No, because Guest with virtio-net device uses 65536 bytes
as mtu to transmit packets to Host, and the tc filter with the default mtu
value 2k drops packets whose size is larger than 2k. So, the most packets
is droped and again leads to deterioration of TCP throughput.
The appropriate mtu value is 65536 bytes which is equal to the maximum value
of network interface device defined in <linux/netdevice.h>. The value is
not so large that it causes token starvation and not so small that it
drops most packets.
Therefore this patch set the mtu value to 64kb(== 65535 bytes).
Again, here are the outbound QoS parameters and the TCP throughput with
the libvirt patched.
outbound average rate[kilobytes/s] : Guest to Host throughput[Mbit/s]
======================================================================
1024 (8Mbit/s) : 8.22
2048 (16Mbit/s) : 16.42
4096 (32Mbit/s) : 32.93
8192 (64Mbit/s) : 66.85
16384 (128Mbit/s) : 133.88
32768 (256Mbit/s) : 271.01
65536 (512Mbit/s) : 547.32
The outbound traffic conforms to the given limit.
Thank you,
Signed-off-by: Eiichi Tsukata <eiichi.tsukata.xh@hitachi.com>
(cherry picked from commit 0ac3baee2c)
Conflicts:
AUTHORS
Minimal CPU "parser" for s390 to avoid compile time warning.
Signed-off-by: Thang Pham <thang.pham@us.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
(cherry picked from commit bf2e40fac0)
(crobinso: Add Thang to AUTHORS)
Starting a KVM guest on s390 fails immediately. This is because
"qemu --help" reports -no-acpi even for the s390(x) architecture but
-no-acpi isn't supported there.
Workaround is to remove QEMU_CAPS_NO_ACPI from the capability set
after the version/capability extraction.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
(cherry picked from commit 6a6c347118)
(crobinso: add Viktor to AUTHORS)
Fix the default usb controller for pseries systems if none
specified.
Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
(cherry picked from commit d1778b7148)
I came across a bug that the command line generated for passthrough
of the host parallel port /dev/parport0 by libvirt for QEMU is incorrect.
It currently produces:
-chardev tty,id=charparallel0,path=/dev/parport0
-device isa-parallel,chardev=charparallel0,id=parallel0
The first parameter is "tty". It sould be "parport".
If I launch qemu with -chardev parport,... it works as expected.
I have already filled a bug report (
https://bugzilla.redhat.com/show_bug.cgi?id=823879 ), the topic was
already on the list some months ago:
https://www.redhat.com/archives/libvirt-users/2011-September/msg00095.html
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 7508338ff3)
The stream lock is unlocked twice instead of being locked and then
unlocked. Probably a typo.
(cherry picked from commit 107f51b69c)
Conflicts:
AUTHORS
If console[0] is an alias for serial[0], do not enforce the former to
have a PTY source type. This breaks serial consoles on stdio and makes
no sense.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
In the current V3 migration protocol, Libvirt does not
check the result of the function
qemuMigrationVPAssociatePortProfiles
This means that it is possible for a migration to complete
successfully even when the VM loses network connectivity on
the destination host.
With this change libvirt aborts the migration
(during the "finish" step) when the above function fails, that
is to say when at least one of the port profile associations fails.
Signed-off by: Christian Benvenuti <benve@cisco.com>
* Don't advertise information on the network without consent of
the user, either through manual configuration, or a user
interface that drives this option.
* Since libvirtd must be configured for network access anyway
(for all but ssh), this setting was not useful "out of the box",
so changing this default setting does not remove "out of the box"
functionality.
[forwarding this here from RH bug #796732]
When creating a network (virsh net-create) with an erroneous XML
containing an empty <name> element, the error message is misleading:
error: Failed to create network from foo.xml
error: missing domain name information
It took me a bit of time to figure out that it was the *network* name
that was missing (I generate this xml and didn't look at it, first).
I realized that the same message is used for missing name when creating
a domain, network, or device node.
* src/util/virfile.h: the virFileWrapperFdFlags being defined as
a globa variable instead of a type ended up generating a duplicate
symbol error.
* AUTHORS: added Lincoln Myers
This patch allows libvirt to add interfaces to already
existing Open vSwitch bridges. The following syntax in
domain XML file can be used:
<interface type='bridge'>
<mac address='52:54:00:d0:3f:f2'/>
<source bridge='ovsbr'/>
<virtualport type='openvswitch'>
<parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'/>
</virtualport>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03' function='0x0'/>
</interface>
or if libvirt should auto-generate the interfaceid use
following syntax:
<interface type='bridge'>
<mac address='52:54:00:d0:3f:f2'/>
<source bridge='ovsbr'/>
<virtualport type='openvswitch'>
</virtualport>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03' function='0x0'/>
</interface>
It is also possible to pass an optional profileid. To do that
use following syntax:
<interface type='bridge'>
<source bridge='ovsbr'/>
<mac address='00:55:1a:65:a2:8d'/>
<virtualport type='openvswitch'>
<parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'
profileid='test-profile'/>
</virtualport>
</interface>
To create Open vSwitch bridge install Open vSwitch and
run the following command:
ovs-vsctl add-br ovsbr
Move myself from 'Previous maintainers' section to 'the primary maintainers and
people with commit access rights' section, because I have a commit rights now.
Signed-off-by: Alex Jia <ajia@redhat.com>
Added a new field "vm-pid" to the VIRT_CONTROL audit record. This information
is useful to correlated another audit events to the events generated by
libvirt.
Applications can now insert custom nodes and hierarchies into domain
configuration XML. Although currently not enforced, applications are
required to use their own namespaces on every custom node they insert,
with only one top-level element per namespace.
POLLIN and POLLHUP are not mutually exclusive. Currently the following
seems possible: the child writes 3K to its stdout or stderr pipe, and
immediately closes it. We get POLLIN|POLLHUP (I'm not sure that's possible
on Linux, but SUSv4 seems to allow it). We read 1K and throw away the
rest.
When poll() returns and we're about to check the /revents/ member in a
given array element, let's map all the revents bits to two (independent)
ideas: "let's attempt to read()", and "let's attempt to write()". This
should cover all errors, EOFs, and normal conditions; the read()/write()
call should report any pending error.
Under this approach, both POLLHUP and POLLERR are mapped to "needs read()"
if we're otherwise prepared for POLLIN. POLLERR also maps to "needs
write()" if we're otherwise prepared for POLLOUT. The rest of the mappings
(POLLPRI etc.) would be easy, but probably useless for pipes.
Additionally, SUSv4 doesn't appear to forbid POLLIN|POLLERR (or
POLLOUT|POLLERR) set simultaneously. One could argue that the read() or
write() call would return without blocking in these cases (with an error),
so POLLIN / POLLOUT would be justified beside POLLERR.
The code now penalizes POLLIN|POLLERR differently from plain POLLERR. The
former (ie. read() returning -1) is terminal and we jump to cleanup, while
plain POLLERR masks only the affected file descriptor for the future.
Let's unify those.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Earlier, when the number of vcpus was greater than the topology allowed,
libvirt didn't raise an error and continued, resulting in running qemu
with parameters making no sense. Even though qemu did not report any
error itself, the number of vcpus was set to maximum allowed by the
topology.
QEMU does not support security_model for anything but 'path' fs driver type.
Currently in libvirt, when security_model ( accessmode attribute) is not
specified it auto-generates it irrespective of the fs driver type, which
can result in a qemu error for drivers other than path. This patch ensures
that the qemu cmdline is correctly generated by taking into account the
fs driver type.
Signed-off-by: Deepak C Shetty <deepakcs@linux.vnet.ibm.com>
To add support for running libvirt on PowerPC, a CPU driver for the
PowerPC platform must be added.
Most generic cpu driver routines such as CPU compare, decode, etc
are based on CPUID comparison and are not relevant for non-x86
platforms.
Here, we introduce stubs for relevant PowerPC routines invoked by libvirt.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@au.ibm.com>
When spawning an ssh connection, the environment variables
DISPLAY, SSH_ASKPASS, ... are passed. However XAUTHORITY,
which is necessary if the .Xauthority is in a non default
place, was not passed.
Signed-off-by: Christian Franke <nobody@nowhere.ws>
virt-xml-validate fails when run on a domain XML file of type 'vbox'.
For failing test case, see https://bugzilla.redhat.com/show_bug.cgi?id=757097
This patch updates the XML schema to accept all valid hypervisor
types, as well as dropping hypervisor types that are not in use
by the current code base.
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch exports KVM Host Power Management capabilities as XML so that
higher-level systems management software can make use of these features
available in the host.
The script "pm-is-supported" (from pm-utils package) is run to discover if
Suspend-to-RAM (S3) or Suspend-to-Disk (S4) is supported by the host.
If either of them are supported, then a new tag "<power_management>" is
introduced in the XML under the <host> tag.
However in case the query to check for power management features succeeded,
but the host does not support any such feature, then the XML will contain
an empty <power_management/> tag. In the event that the PM query itself
failed, the XML will not contain any "power_management" tag.
To use this, new APIs could be implemented in libvirt to exploit power
management features such as S3/S4.
This patch adds XML definitions for guest NUMA specification and contains
routines to parse the same. The guest NUMA specification looks like this:
<cpu>
...
<topology sockets='2' cores='4' threads='2'/>
<numa>
<cell cpus='0-7' memory='512000'/>
<cell cpus='8-15' memory='512000'/>
</numa>
...
</cpu>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Add virnetdev.h,virnetdevbridge.h,virnetdevtap.h to private symbols,
since debian linker no longer allows transitive link resolution
Signed-off-by: Eli Qiao <taget@linux.vnet.ibm.com>
with /etc/libvirt/libvirt.conf below:
uri_aliases = [
"hail=qemu:///system",
"sleet=qemu+ssh://root 9 115 122 57/system",
"sam=qemu+unix:///system?socket=/var/run/libvirt/libvirt-sock",
]
Neither "virsh -c hailly" nor "hai" should result in matching "hail=qemu:///system"
Fix URI alias prefix matching when connecting
Signed-off-by: Wen Ruo Lv <lvroyce@linux.vnet.ibm.com>
