This introduces a new event type
VIR_DOMAIN_EVENT_ID_GRAPHICS
The same event can be emitted in 3 scenarios
typedef enum {
VIR_DOMAIN_EVENT_GRAPHICS_CONNECT = 0,
VIR_DOMAIN_EVENT_GRAPHICS_INITIALIZE,
VIR_DOMAIN_EVENT_GRAPHICS_DISCONNECT,
} virDomainEventGraphicsPhase;
Connect/disconnect are triggered at socket accept/close.
The initialize phase is immediately after the protocol
setup and authentication has completed. ie when the
client is authorized and about to start interacting with
the graphical desktop
This event comes with *a lot* of potential information
- IP address, port & address family of client
- IP address, port & address family of server
- Authentication scheme (arbitrary string)
- Authenticated subject identity. A subject may have
multiple identities with some authentication schemes.
For example, vencrypt+sasl results in a x509dname
and saslUsername identities.
This results in a very complicated callback :-(
typedef enum {
VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV4,
VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV6,
} virDomainEventGraphicsAddressType;
struct _virDomainEventGraphicsAddress {
int family;
const char *node;
const char *service;
};
typedef struct _virDomainEventGraphicsAddress virDomainEventGraphicsAddress;
typedef virDomainEventGraphicsAddress *virDomainEventGraphicsAddressPtr;
struct _virDomainEventGraphicsSubject {
int nidentity;
struct {
const char *type;
const char *name;
} *identities;
};
typedef struct _virDomainEventGraphicsSubject virDomainEventGraphicsSubject;
typedef virDomainEventGraphicsSubject *virDomainEventGraphicsSubjectPtr;
typedef void (*virConnectDomainEventGraphicsCallback)(virConnectPtr conn,
virDomainPtr dom,
int phase,
virDomainEventGraphicsAddressPtr local,
virDomainEventGraphicsAddressPtr remote,
const char *authScheme,
virDomainEventGraphicsSubjectPtr subject,
void *opaque);
The wire protocol is similarly complex
struct remote_domain_event_graphics_address {
int family;
remote_nonnull_string node;
remote_nonnull_string service;
};
const REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX = 20;
struct remote_domain_event_graphics_identity {
remote_nonnull_string type;
remote_nonnull_string name;
};
struct remote_domain_event_graphics_msg {
remote_nonnull_domain dom;
int phase;
remote_domain_event_graphics_address local;
remote_domain_event_graphics_address remote;
remote_nonnull_string authScheme;
remote_domain_event_graphics_identity subject<REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX>;
};
This is currently implemented in QEMU for the VNC graphics
protocol, but designed to be usable with SPICE graphics in
the future too.
* daemon/remote.c: Dispatch graphics events to client
* examples/domain-events/events-c/event-test.c: Watch for
graphics events
* include/libvirt/libvirt.h.in: Define new graphics event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle graphics events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for VNC events and emit a libvirt graphics event
* src/remote/remote_driver.c: Receive and dispatch graphics
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
graphics events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for VNC_CONNECTED,
VNC_INITIALIZED & VNC_DISCONNETED events from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_IO_ERROR
This event includes the action that is about to be taken
as a result of the watchdog triggering
typedef enum {
VIR_DOMAIN_EVENT_IO_ERROR_NONE = 0,
VIR_DOMAIN_EVENT_IO_ERROR_PAUSE,
VIR_DOMAIN_EVENT_IO_ERROR_REPORT,
} virDomainEventIOErrorAction;
In addition it has the source path of the disk that had the
error and its unique device alias. It does not include the
target device name (/dev/sda), since this would preclude
triggering IO errors from other file backed devices (eg
serial ports connected to a file)
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventIOErrorCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *srcPath,
const char *devAlias,
int action,
void *opaque);
This is currently wired up to the QEMU block IO error events
* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_WATCHDOG
This event includes the action that is about to be taken
as a result of the watchdog triggering
typedef enum {
VIR_DOMAIN_EVENT_WATCHDOG_NONE = 0,
VIR_DOMAIN_EVENT_WATCHDOG_PAUSE,
VIR_DOMAIN_EVENT_WATCHDOG_RESET,
VIR_DOMAIN_EVENT_WATCHDOG_POWEROFF,
VIR_DOMAIN_EVENT_WATCHDOG_SHUTDOWN,
VIR_DOMAIN_EVENT_WATCHDOG_DEBUG,
} virDomainEventWatchdogAction;
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventWatchdogCallback)(virConnectPtr conn,
virDomainPtr dom,
int action,
void *opaque);
* daemon/remote.c: Dispatch watchdog events to client
* examples/domain-events/events-c/event-test.c: Watch for
watchdog events
* include/libvirt/libvirt.h.in: Define new watchdg event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle watchdog events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for watchdogs and emit a libvirt watchdog event
* src/remote/remote_driver.c: Receive and dispatch watchdog
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
watchdog events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for WATCHDOG event
from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_RTC_CHANGE
This event includes the new UTC offset measured in seconds.
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventRTCChangeCallback)(virConnectPtr conn,
virDomainPtr dom,
long long utcoffset,
void *opaque);
If the guest XML configuration for the <clock> is set to
offset='variable', then the XML will automatically be
updated with the new UTC offset value. This ensures that
during migration/save/restore the new offset is preserved.
* daemon/remote.c: Dispatch RTC change events to client
* examples/domain-events/events-c/event-test.c: Watch for
RTC change events
* include/libvirt/libvirt.h.in: Define new RTC change event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle RTC change events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for RTC changes and emit a libvirt RTC change event
* src/remote/remote_driver.c: Receive and dispatch RTC change
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
RTC change events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for RTC_CHANGE event
from QEMU monitor
The reboot event is not a normal lifecycle event, since the
virtual machine on the host does not change state. Rather the
guest OS is resetting the virtual CPUs. ie, the QEMU process
does not restart. Thus, this does not belong in the current
lifecycle events callback.
This introduces a new event type
VIR_DOMAIN_EVENT_ID_REBOOT
It takes no parameters, besides the virDomainPtr, so it can
use the generic callback signature.
* daemon/remote.c: Dispatch reboot events to client
* examples/domain-events/events-c/event-test.c: Watch for
reboot events
* include/libvirt/libvirt.h.in: Define new reboot event ID
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle reboot events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for reboots and emit a libvirt reboot event
* src/remote/remote_driver.c: Receive and dispatch reboot
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
reboot events
To avoid confusion, rename the current REMOTE_PROC_DOMAIN_EVENT
message to REMOTE_PROC_DOMAIN_EVENT_LIFECYCLE. This does not
cause ABI problems, since the names are only relevant at the source
code level. On the wire they encoding is a plain integer whose
value does not change
* src/remote/remote_protocol.x: Rename REMOTE_PROC_DOMAIN_EVENT
to REMOTE_PROC_DOMAIN_EVENT_LIFECYCLE.
* daemon/remote.c, src/remote/remote_driver.c: Update code for
renamed event
This wires up the remote driver to handle the new events APIs.
The public API allows an application to request a callback filters
events to a specific domain object, and register multiple callbacks
for the same event type. On the wire there are two strategies for
this
- Register multiple callbacks with the remote daemon, each
with filtering as needed
- Register only one callback per event type, with no filtering
Both approaches have potential inefficiency. In the first scheme,
the same event gets sent over the wire many times if multiple
callbacks are registered. With the second scheme, unneccessary
events get sent over the wire if a per-domain filter is set on
the client. The second scheme is far easier to implement though,
so this patch takes that approach.
* daemon/dispatch.h: Don't export remoteRelayDomainEvent since it
is no longer needed for unregistering callbacks, instead the
unique callback ID is used
* daemon/libvirtd.c, daemon/libvirtd.h: Track and unregister
callbacks based on callback ID, instead of function pointer
* daemon/remote.c: Switch over to using virConnectDomainEventRegisterAny
instead of legacy virConnectDomainEventRegister function. Refactor
remoteDispatchDomainEventSend() to cope with arbitrary event types
* src/driver.h, src/driver.c: Move verify() call into source file
instead of header, to avoid polluting the global namespace with
the verify function name
* src/remote/remote_driver.c: Implement new APIs for event
registration. Refactor processCallDispatchMessage() to cope
with arbitrary incoming event types. Merge remoteDomainQueueEvent()
into processCallDispatchMessage() to avoid duplication of code.
Rename remoteDomainReadEvent() to remoteDomainReadEventLifecycle()
* src/remote/remote_protocol.x: Define wire format for the new
virConnectDomainEventRegisterAny and virConnectDomainEventDeregisterAny
functions
https://bugzilla.redhat.com/show_bug.cgi?id=538701
* daemon/libvirtd.init.in: daemon/libvirtd.init.in were not mentionned
in the usage message and if a missing or wrong argument is given it
should return 2, not 1
Having a single logrotate configuration file for all hypervisors
did not work as logrotate would get confused if an hypervisor not
supported on that platform was still listed. Simplest is to split
the logrotate as separate per hypervisor files and change the
spec file to only install the ones compiled in.
* daemon/libvirtd.lxc.logrotate.in daemon/libvirtd.qemu.logrotate.in
daemon/libvirtd.uml.logrotate.in: copy and split the original
daemon/libvirtd.logrotate.in file
* daemon/Makefile.am: update to support the different files and
cleanup in sed suggested by Eric Blake
* libvirt.spec.in: only install the relevant logrotate configs
* daemon/.gitignore: update logrotate generated list
This defines the wire protocol for the new API
* src/remote/remote_protocol.x: Wire protocol definition
* src/remote/remote_driver.c,daemon/remote.c: Client and server
side implementation
* daemon/remote_dispatch_args.h, daemon/remote_dispatch_prototypes.h,
daemon/remote_dispatch_table.h, src/remote/remote_protocol.c,
src/remote/remote_protocol.h: Re-generate from remote_protocol.x
* src/remote/remote_protocol.x: Define wire protocol format
for virDomainGetJobInfo API
* src/remote/remote_driver.c, daemon/remote.c: Implement client
and server marshalling code for virDomainGetJobInfo()
* daemon/remote_dispatch_args.h, daemon/remote_dispatch_prototypes.h
daemon/remote_dispatch_ret.h, daemon/remote_dispatch_table.h,
src/remote/remote_protocol.c, src/remote/remote_protocol.h: Rebuild
files from src/remote/remote_protocol.x
From time to time I bork my install, and hate it when the initscript
returns no info. This patch removes the sanity check, which lets
the shell give us 'command not found' or 'permission denied' errors.
If I toggle enable_tcp in libvirtd.conf and add --listen in
/etc/init.d/libvirtd, I get the unhelpful error:
Starting libvirtd daemon: error: Unable to initialize network sockets.
Running without --daemon provides much more useful info:
sudo libvirtd --listen
11:29:26.117: error : remoteCheckCertFile:270 : Cannot access CA certificate '/etc/pki/CA/cacert.pem': No such file or directory
The daemon architecture makes it difficult to report this useful
info if daemonized, so point users to /var/log/messages and
dropping the --daemon flag if they want more info.
The 'int virInterfaceIsActive()' method was directly returning the
value of the 'int active:1' bitfield in virIntefaceDefPtr. A bitfield
with a signed integer, will hold the values 0 and -1, not 0 and +1
as might be expected. This meant that virInterfaceIsActive() was
always returning -1 when the interface was active, not +1 & thus all
callers thought an error had occurred. To protect against this kind
of mistake again, change all bitfields to be unsigned ints
* daemon/libvirtd.h, src/conf/domain_conf.h, src/conf/interface_conf.h,
src/conf/network_conf.h: Change bitfields to unsigned int.
I noticed some debug messages are printed with an empty lines after
them. This patch removes these empty lines from all invocations of the
following macros:
VIR_DEBUG
VIR_DEBUG0
VIR_ERROR
VIR_ERROR0
VIR_INFO
VIR_WARN
VIR_WARN0
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The daemon will attempt to unregister domain events on client disconnect,
even if no events were ever registered. This raises an unneeded error.
Track in the qemu_client structure if events have been registered, and
check this when performing cleanup.
All other stateful drivers are linked directly to libvirtd
instead of libvirt.so. Link the secret driver to libvirtd too.
* daemon/Makefile.am: link the secret driver to libvirtd
* daemon/libvirtd.c: add #ifdef WITH_SECRETS blocks
* src/Makefile.am: don't link the secret driver to libvirt.so
* src/libvirt_private.syms: remove the secretRegister symbol
Use a dynamically sized xdr_array to pass memory stats on the wire. This
supports the addition of future memory stats and reduces the message size
since only supported statistics are returned.
* src/remote/remote_protocol.x: provide defines for the new entry point
* src/remote/remote_driver.c daemon/remote.c: implement the client and
server side
* daemon/remote_dispatch_args.h daemon/remote_dispatch_prototypes.h
daemon/remote_dispatch_ret.h daemon/remote_dispatch_table.h
src/remote/remote_protocol.c src/remote/remote_protocol.h: generated
stubs
* src/remote/remote_protocol.x: update with new entry point
* daemon/remote.c: add the new server dispatcher
* daemon/remote_dispatch_args.h daemon/remote_dispatch_prototypes.h
daemon/remote_dispatch_ret.h daemon/remote_dispatch_table.h
src/remote/remote_protocol.c src/remote/remote_protocol.h: regenerated
Replace free(virBufferContentAndReset()) with virBufferFreeAndReset().
Update documentation and replace all remaining calls to free() with
calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset()
and virReportOOMError() in OOM error cases.
On kernels with HZ=100, the resolution of sleeps in poll() is
quite bad. Doing a precise check on the expiry time vs the
current time will thus often thing the timer has not expired
even though we're within 10ms of the expected expiry time. This
then causes another pointless sleep in poll() for <10ms. Timers
do not need to have such precise expiration, so we treat a timer
as expired if it is within 20ms of the expected expiry time. This
also fixes the eventtest.c test suite on kernels with HZ=100
* daemon/event.c: Add 20ms fuzz when checking for timer expiry
The libvirtd initscript could get confused between the system and
session instances of the daemon. To avoid this it is neccessary
to check the pidfile explicitly.
* daemon/libvirtd.init.in: Always check the pidfile of the system
daemon to avoid confusion with the session daemons
* configure.in: add new --with-udev, disabled by default, and requiring
libudev > 145
* src/node_device/node_device_udev.c src/node_device/node_device_udev.h:
the new node device backend
* src/node_device/node_device_linux_sysfs.c: moved node_device_hal_linux.c
to a better file name
* src/conf/node_device_conf.c src/conf/node_device_conf.h: add a couple
of fields in node device definitions, and an API to look them up,
remove a couple of unused fields from previous patch.
* src/node_device/node_device_driver.c src/node_device/node_device_driver.h:
plug the new driver
* po/POTFILES.in src/Makefile.am src/libvirt_private.syms: add the new
files and symbols
* src/util/util.h src/util/util.c: add a new convenience macro
virBuildPath and virBuildPathInternal() function
There is currently no way to determine the libvirt version of a remote
libvirtd we are connected to. This is a useful piece of data to enable
feature detection.
Sometimes getaddrinfo returns IPv4 addresses before IPv6 addresses.
IPv6 sockets default to attempting to bind to IPv4 addresses too.
So if the IPv4 address is activated first, then binding to IPv6
will unneccessarily fail.
* daemon/libvirtd.c: Bind to IPv6 and IPv4 addresses separately
All drivers have copy + pasted inadequate error reporting which wraps
util.c:virGetHostname. Move all error reporting to this function, and improve
what we report.
Changes from v1:
Drop the driver wrappers around virGetHostname. This means we still need
to keep the new conn argument to virGetHostname, but I think it's worth
it.
The virStateInitialize() call for starting up stateful drivers
may require that the event loop is running already. This it is
neccessary to start the event loop before this call. At the
same time, network clients must not be processed until afte
virStateInitialize has completed.
The qemudListenUnix() and remoteListenTCP() methods must
therefore not register file handle watches, merely open the
network sockets & listen() on them. This means clients can
connected and are queued, pending completion of initialization
The qemudRunLoop() method is moved into a background thread
that is started early to allow access to the event loop during
driver initialization. The main process thread leader pretty
much does nothing once the daemon is running, merely waits
for the event loop thread to quit
* daemon/libvirtd.c, daemon/libvirtd.h: Move event loop into
a background thread
* daemon/THREADING.txt: Rewrite docs to better reflect reality
* configure.in daemon/Makefile.am: the --with-init-script configure
option was broken, and always defaulted based on the existence of
/etc/redhat-release. This was a systematic typo based on
mixed use of init-script and init-scripts.
The daemonizing code lets the parent exit almost immediately. This
means that it may think it has successfully started even when
important failures occur like not being able to acquire the PID
file. It also means network sockets are not yet open.
To address this when daemonizing the parent passes an open pipe
file descriptor to the child. The child does its basic initialization
and then writes a status code to the pipe indicating either success,
or failure. This ensures that when daemonizing, the parent does not
exit until the pidfile is acquired & basic network sockets are open.
Initialization of the libvirt drivers is still done asynchronously
since this may take a very long time.
* daemon/libvirtd.c: Force parent to stay around until basic config
file, pidfile & network socket init is completed
* daemon/libvirtd.c: Introduce a daemonSetupSignals() method
and put all signal handling code there
* daemon/libvirtd.h: Add sigread/sigwrite to qemud_server type
The libvirt default error handling callback will print all errors
to stderr. The libvirtd default logging callback will do the same.
Set a no-op error handling callback in libvirtd to prevent this
duplication
* daemon/libvirtd.c: Register a no-op error handling function
virInitialize must be the first libvirt function called to ensure
threads, error handling & random number generator are all setup.
Move UNIX socket directory permissions change to place of use
* daemon/libvirtd.c: Change qemudNetworkInit() so that it doesn't try
to free its argument, leaving the caller todo cleanup as is normal
practice. Add missing policykit cleanup to qemudCleanup, and remove
server watch if set. Remove duplicated call to listen() on TCP sockets
Nearly all of the methods in src/util/util.h have error codes that
must be checked by the caller to correct detect & report failure.
Add ATTRIBUTE_RETURN_CHECK to ensure compile time validation of
this
* daemon/libvirtd.c: Add explicit check on return value of virAsprintf
* src/conf/domain_conf.c: Add missing check on virParseMacAddr return
value status & report error
* src/network/bridge_driver.c: Add missing OOM check on virAsprintf
and report error
* src/qemu/qemu_conf.c: Add missing check on virParseMacAddr return
value status & report error
* src/security/security_selinux.c: Remove call to virRandomInitialize
that's done in libvirt.c already
* src/storage/storage_backend_logical.c: Add check & log on virRun
return status
* src/util/util.c: Add missing checks on virAsprintf/Run status
* src/util/util.h: Annotate all methods with ATTRIBUTE_RETURN_CHECK
if they return an error status code
* src/vbox/vbox_tmpl.c: Add missing check on virParseMacAddr
* src/xen/xm_internal.c: Add missing checks on virAsprintf
* tests/qemuargv2xmltest.c: Remove bogus call to virRandomInitialize()
Without this, after few weeks without use, each defined domain grows a
tail of empty gzipped logs, instead of keeping just the last log of
interest.
* daemon/libvirtd.logrotate.in: only rotate when the log is over 100 KBytes
Since virMigratePrepareTunnel() is used for migration over the
native libvirt connection, there is never any need to pass the
target URI to this method.
* daemon/remote.c, src/driver.h, src/libvirt.c, src/libvirt_internal.h,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/remote/remote_protocol.c, src/remote/remote_protocol.h,
src/remote/remote_protocol.x: Remove 'uri_in' parameter from
virMigratePrepareTunnel() method
Otherwise logrotate barfs:
error: error accessing /var/log/libvirt/uml: No such file or directory
error: libvirtd:1 glob failed for /var/log/libvirt/uml/*.log
error: found error in /var/log/libvirt/qemu/*.log /var/log/libvirt/uml/*.log /var/log/libvirt/lxc/*.log , skipping
* qemud/Makefile.am: always create /var/log/libvirt/{lxc,uml} when
installing the logrotate conf; not ideal, but easier than making
the logrotate conf depend on which drivers are enabled
The code which updated the message length after writing the
payload wrote the updated length word in the wrong place since
the XDR object was given a buffer pointing to the start of the
header payload, rather than message start.
* daemon/remote.c: Fix updating of event message length so that
we actually send the payload, not just the header
Implementation of tunnelled migration, using a Unix Domain Socket
on the qemu backend. Note that this requires very new versions of
qemu (0.10.7 at least) in order to get the appropriate bugfixes.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Right now, the stream stuff assumes that a stream is always
going to be used for transmit. This is not the case, and in
fact doesn't work with the tunnelled migration stuff. Add
a flag to remoteClientStream() to allow it to do RX only.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The actual type of size_t is architecture dependent. Because the len
parameter is used as unsigned int in remoteSendStreamData(), change its
type to unsigned int.
* daemon/dispatch.[ch]: change size_t to unsigned int for
remoteSendStreamData()
Commit 47cab73499 changed the way how
qemud_client_message objects were reused. Before this commit
remoteDispatchClientRequest() reused the received message for normal responses
and to report non-fatal errors. If a fatal error occurred qemudWorker() frees
the message. After this commit non-fatal errors are reported by
remoteSerializeReplyError() using a new qemud_client_message object and the
original message leaks.
To fix this leak the original message has to be freed if
remoteSerializeReplyError() succeeds. If remoteSerializeReplyError()
fails the original message is freed in qemudWorker().
* daemon/dispatch.c: free qemud_client_message objects that will not be reused
and would leak otherwise, also free the allocated qemud_client_message object
in remoteSerializeError() if an error occurs
When using VNC for graphics + keyboard + mouse, we shouldn't
then use the host OS for audio. Audio should go back over
VNC.
When using SDL for graphics, we should use the host OS for
audio since that's where the display is. We need to allow
certain QEMU env variables to be passed through to guest
too to allow choice of QEMU audio backend.
* qemud/libvirtd.sysconf: Mention QEMU/SDL audio env vars
* src/qemu_conf.c: Passthrough QEMU/SDL audio env for SDL display,
disable host audio for VNC display
* daemon/dispatch.c: Set streamTX flag on outgoing data packets
* daemon/qemud.h: Add streamTX flag to track outgoing data
* daemon/qemud.c: Re-enable further TX when outgoing data packet
has been fully sent.
* daemon/stream.h, daemon/stream.c: Add method for enabling TX.
Support reading from streams and transmitting data out to client
Defines the extensions to the remote protocol for generic
data streams. Adds a bunch of helper code to the libvirtd
daemon for working with data streams.
* daemon/Makefile.am: Add stream.c/stream.h to build
* daemon/stream.c, qemud/stream.h: Generic helper functions for
creating new streams, associating streams with clients, finding
existing streams for a client and removing/deleting streams.
* src/remote/remote_protocol.x: Add a new 'REMOTE_STREAM' constant
for the 'enum remote_message_type' for encoding stream data
in wire messages. Add a new 'REMOTE_CONTINUE' constant to
'enum remote_message_status' to indicate further data stream
messsages are expected to follow. Document how the
remote_message_header is used to encode data streams
* src/remote/remote_protocol.h: Regenerate
* daemon/dispatch.c: Remove assumption that a error message
sent to client is always type=REMOTE_REPLY. It may now
also be type=REMOTE_STREAM. Add convenient method for
sending outgoing stream data packets. Log and ignore
non-filtered incoming stream packets. Add a method for
serializing a stream error message
* daemon/dispatch.h: Add API for serializing stream errors
and sending stream data packets
* daemon/qemud.h: Add struct qemud_client_stream for tracking
active data streams for clients. Tweak filter function
operation so that it accepts a client object too.
* daemon/qemud.c: Refactor code for free'ing message objects
which have been fully transmitted into separate method.
Release all active streams when client shuts down. Change
filter function to be responsible for queueing the message
Add the virStrncpy function, which takes a dst string, source string,
the number of bytes to copy and the number of bytes available in the
dest string. If the source string is too large to fit into the
destination string, including the \0 byte, then no data is copied and
the function returns NULL. Otherwise, this function copies n bytes
from source into dst, including the \0, and returns a pointer to the
dst string. This function is intended to replace all unsafe uses
of strncpy in the code base, since strncpy does *not* guarantee that
the buffer terminates with a \0.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When making changes to the remote protocol, src/ is always built
first, so rpcgen should live there, to avoid having to run make
in the 'daemon/' directory before building src/
* src/Makefile.am: Add rules for rpcgen, and drop -I../daemon from
remote client build
* daemon/Makefile.am: Add -I../src/remote/ to libvirtd build
and remove rpcgen rules
* daemon/libvirtd.c: Adapt include of remote_driver.h taking
into account new -I flag
* daemon/remote_protocol.c, daemon/remote_protocol.h,
daemon/remote_protocol.x: Move to src/remote/
* daemon/rpcgen_fix.pl: Move to src/remote/rpcgen_fix.pl
* src/capabilities.c, src/capabilities.h, src/domain_conf.c,
src/domain_conf.h, src/domain_event.c, src/domain_event.h,
src/interface_conf.c, src/interface_conf.h,
src/network_conf.c, src/network_conf.h, src/node_device_conf.c,
src/node_device_conf.h, src/secret_conf.c, src/secret_conf.h,
src/storage_conf.c, src/storage_conf.h, src/storage_encryption_conf.c,
src/storage_encryption_conf.h: Move to src/conf/
* src/Makefile.am: Add -Isrc/conf to the individual build targets
which need to use XML config APIs. Remove LIBXML_CFLAGS, LIBSSH2_CFLAGS
and SELINUX_CFLAGS from global INCLUDES and only have them in build
targets which actually need them. Create a libvirt_conf.la
convenience library for all config parsers
* src/hostusb.h: Remove bogus include of domain_conf.h
* tests/Makefile.am: Add -Isrc/conf. Remove bogus -I$builddir/src
since it never has any generated header files
* daemon/Makefile.am: Add -Isrc/conf
* proxy/Makefile.am: Add -Isrc/conf and cope with renamed files
* src/hash.c: Remove bogus include of libxml/threads.h
* daemon/default-network.xml: Move to src/network/default.xml
* daemon/libvirtd_qemu.aug, daemon/test_libvirtd_qemu.aug: Move
to src/qemu/
* src/qemu.conf: Move to src/qemu/qemu.conf
* daemon/Makefile.am: Remove rules for default-nmetwork.xml and
libvirtd_qemu.aug and test_libvirtd_qemu.aug. Fix typo in
uninstall-local that would install polkit again.
* src/Makefile.am: Add rules for installing network/default.xml
and the qemu/*.aug files. Add test case for QEMU augeas files.
Add uninstall-local rule for files/directories created during
install. Rename install-exec-local to install-data-local.
Only install qemu.conf if WITH_QEMU is set.
* tests/networkschematest: Update for XML location move
