The @tmpIfname is a pointer into a const string. To avoid
mistakenly changing the const string via the pointer, make the
pointer const too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It was never used since commit 57b5e27d3d introduced it.
Signed-off-by: Yan Wang <wangyan122@huawei.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modern way to store <auth> and <encryption> of a <disk> is under
<source>. This was added to mirror how <backingStore> handles these and
in fact they are relevant to the source rather than to any other part of
the disk. Historically we allowed them to be directly under <disk> and
we need to keep compatibility.
This wasn't a problem until introduction of -blockdev in qemu using of
<auth> or <encryption> plainly wouldn't work with backing chains.
Now that it works in backing chains and can be moved back and forth
using snapshots/block-commit we need to ensure that the original
placement is properly kept even if the source changes.
To achieve the above semantics we need to store the preferred placement
with the disk definition rather than the storage source definitions and
also ensure that the modern way is chosen when the VM started with
<source/encryption> only in the backing store.
https://bugzilla.redhat.com/show_bug.cgi?id=1822878
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As suggested in the linked bug, libvirt should firstly check
whether the major number of the device is device mapper major.
Because if it isn't subsequent DM_DEVICE_DEPS task may not only
fail, but also yield different results. In the bugzilla this is
demonstrated by creating a devmapper target named 'loop0' and
then creating loop target /dev/loop0. When the latter is then
passed to a domain, our virDevMapperGetTargetsImpl() function
blindly asks devmapper to provide target dependencies for
/dev/loop0 and because of the way devmapper APIs work, it will
'sanitize' the input by using the last component only which is
'loop0' and thus return different results than expected.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1823976
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need this for all tests that use virHostdevManager, because
during creation of this object for unprivileged connections
like those used in the test suite we would end up writing inside
the user's home directory.
That's bad manners in general, but when running the test suite
inside a purposefully constrained environment such as the one
exposed by pbuilder, it turns into an outright test failure:
Could not initialize HostdevManager - operation failed: Failed
to create state dir '/nonexistent/.cache/libvirt/hostdevmgr'
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In a few places we use 0 and false, or 1 and true interchangeably
even though the variable or return type in question is boolean.
Fix those places.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of the following pattern:
type ret;
...
ret = func();
return ret;
we can use:
return func()
directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The implementation was never finished in libvirt. Remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our implementation wasn't quite able to parse everything that qemu does.
This patch rewrites the parser to a code that semantically resembles the
combination of 'nbd_parse_filename' and 'inet_parse' methods in qemu to
be able to parse the strings in an equivalent manner.
The only thing that libvirt doesn't do is to check the lengths of
various components in the nbd string in places where qemu uses constant
size buffers.
The test cases validate that some of the corner cases involving colons
are parsed properly.
https://bugzilla.redhat.com/show_bug.cgi?id=1826652
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
virCommand is now used everywhere.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Suggested-by: Sebastian Mitterle <smitterl@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Catch the individual usage not removed in previous commits.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If an user is trying to configure a dhcp neetwork settings, it is not
possible to change the leasetime of a range or a host entry. This is
available using dnsmasq extra options, but they are associated with
dhcp-range or dhcp-hosts fields. This patch implements a leasetime for
range and hosts tags. They can be defined under that settings:
<dhcp>
<range ...>
<lease/>
</range>
<host ...>
<lease/>
</host>
</dhcp>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=913446
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The udev monitor thread "udevEventHandleThread()" will lag the
actual/real view of devices in sysfs as it serially processes udev
monitor events. So for instance if you were to run the following cmd
to create a new veth pair and rename one of the veth endpoints
you might see the following monitor events and real world that looks like
time
| create v0 sysfs entry
wake udevEventHandleThread | create v1 sysfs entry
udev_monitor_receive_device(v1-add) | move v0 sysfs to v2
udevHandleOneDevice(v1) |
udev_monitor_receive_device(v0-add) |
udevHandleOneDevice(v0) | <--- error msgs in virNetDevGetLinkInfo()
udev_monitor_receive_device(v2-move) | as v0 no longer exists
udevHandleOneDevice(v2) |
\/
As you can see the changes in sysfs can take place well before we get
to act on the events in the udevEventHandleThread(), so by the time we
get around to processing the v0 add event, the sysfs entry has been
moved to v2.
To work around this we check if the sysfs entry is valid before
attempting to read it and don't bother trying to read link info if
not. This is safe since we will never read sysfs entries earlier than
it existing, ie. if the entry is not there it has either been removed
in the time since we enumerated the device or something bigger is
busted, in either case, no sysfs entry, no link info. In the case
described above we will eventually get the link info as we work
through the queue of monitor events and get to the 'move' event.
https://bugzilla.redhat.com/show_bug.cgi?id=1557902
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While I'm at it, use more g_autofree and g_autoptr() in this
file. This also fixes a possible mem-leak in
virNetDevGetVirtualFunctions().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I've just got a new machine and I'm still converging on the
kernel config. Anyway, since I don't have enabled any of SRIO-V
drivers, my kernel doesn't have NET_DEVLINK enabled (i.e.
virNetDevGetFamilyId() returns 0). But this makes nodedev driver
ignore all interfaces, because when enumerating all devices via
udev, the control reaches virNetDevSwitchdevFeature() eventually
and subsequently virNetDevGetFamilyId() which 'fails'. Well, it's
not really a failure - the virNetDevSwitchdevFeature() stub
simply returns 0.
Also, move the call a few lines below, just around the place
where it's needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in v3.8.0-rc1~96, the virNetDevGetFamilyId() gets
netlink family ID for passed family name (even though it's used
only for getting "devlink" ID). Nevertheless, the function
returns 0 on an error or if no family ID was found. This makes it
harder for a caller to distinguish these two. Change the retval
so that a negative value is returned upon error, zero is no ID
found (but no error encountered) and a positive value is returned
on successful translation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This commit partially reverts
commit c360ea28dc
Refs: v6.2.0-rc1-1-gc360ea28dc
Author: Rafael Fonseca <r4f4rfs@gmail.com>
AuthorDate: Fri Mar 27 18:40:47 2020 +0100
Commit: Michal Prívozník <mprivozn@redhat.com>
CommitDate: Mon Mar 30 09:48:22 2020 +0200
util: virdaemon: fix compilation on mingw
The daemons are not supported on Win32 and therefore were not compiled
in that platform. However, with the daemon code sharing, all the code in
utils *is* compiled and it failed because `waitpid`, `fork`, and
`setsid` are not available. So, as before, let's not build them on
Win32 and make the code more portable by using existing vir* wrappers.
Not compiling virDaemonForkIntoBackground on Win32 is good, but the
second part of the original patch incorrectly replaced waitpid and fork
with our virProcessWait and virFork APIs. These APIs are more than just
simple wrappers and we don't want any of the extra functionality.
Especially virFork would reset any setup made before
virDaemonForkIntoBackground is called, such as logging, signal handling,
etc.
As a result of the change the additional fix in v6.2.0-67-ga87e4788d2
(util: virdaemon: fix waiting for child processes) is no longer
needed and it is effectively reverted by this commit.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unlike `waitpid`, `virProcessWait` only returns -1 (error) or 0
(success), so comparing that to `pid` will always be false and the
parent will report failure with:
error : main:851 : Failed to fork as daemon: No such file or directory
even though the grandchild process is succesfully running. Note that the
errno message is misleading: it was last set when trying to find a
restart state file.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reported-by: Marcin Krol <hawk@tld-linux.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
For http/https URIs we need to preserve the query part as it may be
important to refer to the image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a new attribute for holding the query part for http(s) disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While it is impossible for VIR_ALLOC() to return an error, we
should be consistent with the rest of the code and not continue
initializing the virSecurityDeviceLabelDef structure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Unfortunately, yajl_free() is not NOP on NULL. It really does
expect a valid pointer. Therefore, check whether the pointer we
want to pass to it is NULL or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The daemons are not supported on Win32 and therefore were not compiled
in that platform. However, with the daemon code sharing, all the code in
utils *is* compiled and it failed because `waitpid`, `fork`, and
`setsid` are not available. So, as before, let's not build them on
Win32 and make the code more portable by using existing vir* wrappers.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Several daemons have similar code around general daemon startup code.
Let's move it into a file and share it among them.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The quotes are forbidden only inside the value, but the value itself may
be enclosed in quotes. Fix the RNG schema and validator and add a test
case.
https://bugzilla.redhat.com/show_bug.cgi?id=1804750
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unfortunately, advisory record locking lose the lock if any fd refering
to the file is closed. There doesn't seem to be a way to preserve the
lock atomically. We could eventually retake the lock if low pidfilefd
is required.
This fixes processes being leaked, as they are not killed in
virPidFileForceCleanupPath() if the lock can be taken. Here also, we may
consider this is not good enough, as a process may leak by simply
closing the pidfilefd.
Fixes commit d146105f1e ("virCommand:
Actually acquire pidfile instead of just writing it")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our virCommand module allows us to set a pidfile for commands we
want to spawn. The caller constructs the string of pidfile path
and then uses virCommandSetPidFile() to tell the module to write
the pidfile once the command is ran. This usually works, but has
two flaws:
1) the child process does not hold the pidfile open & locked.
Therefore, the caller (or anybody else) can't use our fancy
virPidFileForceCleanupPath() function to kill the command
afterwards. Also, for everybody else on the system it's
needlessly harder to check if the pid from the pidfile is still
alive or not.
2) if the caller ever makes a mistake and passes the same pidfile
path for two different commands, the start of the second command
will overwrite the pidfile even though the first command might
still be running.
NOTE that this temporarily renders some command spawning
unusable, specifically those code patterns where both
virCommandSetPidFile() is used together with instructing spawned
command to acquire pidfile itself. Fortunately, there is only one
occurrence of such pattern and it is in
qemuProcessStartManagedPRDaemon(). This is fixed in next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Our code allows snapshots of NVMe based disks which means we create
overlay file with a 'json:{}' pseudo-uri refering to the NVME device.
Our parser code doesn't handle them though. Add the parser and test it
via the XML->json->XML round-trip and reference data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemublocktest showed that we don't add the "fat:" prefix for directory
storage when formatting the backing store string. While it's unlikely to
be used it's simple enough to actually implement the support rather than
trying to forbid it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While 'namespace' is not a reserved word in C, it is in C++. Our
compilers are happy with it but syntax-hilighting in some editors
hilights is as a keyword. Rename it to prevent confusion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virHostCPUGetStatsLinux walks through every cpu in /proc/stat until it
finds cpu%cpuNum that matches with the requested cpu.
If none is found it logs the error but it should return -1, instead of 0.
Otherwise virsh nodecpustats --cpu <invalid cpu number> and API bindings
don't fail properly, printing a blank line instead of an error message.
This patch also includes an additional test for virhostcputest to avoid
this regression to happen again in the future.
Fixes: 93af79fba3
Reported-by: Satheesh Rajendran <satheera@in.ibm.com>
Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The functionality is now provided by glib's GKeyFile.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace libvirt's virKeyFile by glib's GKeyFile.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When running a function in a forked child, so far the only thing
we could report is exit status of the child and the error
message. However, it may be beneficial to the caller to know the
actual error that happened in the child.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
The @src is not always a file. It may also be a directory (for
instance qemuDomainCreateDeviceRecursive() assumes that) - even
though it doesn't happen usually. Anyway, mount() can mount only
a dir onto a dir and a file onto a file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
For the few instances where we'd generate an array in dotted syntax we
should be able to parse it back. Add another step in deflattening of the
dotted syntax which reconstructs the arrays so that the backing store
parser can parse it.
https://bugzilla.redhat.com/show_bug.cgi?id=1466177
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extract the code so that there's a clean separation once we'll want do
do other steps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory handling to remove the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virBitmapNewEmpty can't fail now so we can make it obvious and fix all
callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virStorageEncryptionSecretPtr may have a string inside it, thus we must
copy the string too. Use virSecretLookupDefCopy to do that.
Caused by non-obvious code introduced in 756b46ddd2 and later 47e88b33b
which added a string that needed to be copied.
https://bugzilla.redhat.com/show_bug.cgi?id=1814923
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function always returns succes so there's no need for a return
value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 7b79ee2f78 makes assumptions about die_id parsing in
the sysfs that aren't true for Power hosts. In both Power8
and Power9, running 5.6 and 4.18 kernel respectively,
'die_id' is set to -1:
$ cat /sys/devices/system/cpu/cpu0/topology/die_id
-1
This breaks virHostCPUGetDie() parsing because it is trying to
retrieve an unsigned integer, causing problems during VM start:
virFileReadValueUint:4128 : internal error: Invalid unsigned integer
value '-1' in file '/sys/devices/system/cpu/cpu0/topology/die_id'
This isn't necessarily a PowerPC only behavior. Linux kernel commit
0e344d8c70 added in the former Documentation/cputopology.txt, now
Documentation/admin-guide/cputopology.rst, that:
To be consistent on all architectures, include/linux/topology.h
provides default definitions for any of the above macros that are
not defined by include/asm-XXX/topology.h:
1) topology_physical_package_id: -1
2) topology_die_id: -1
(...)
This means that it might be expected that an architecture that
does not implement the die_id element will mark it as -1 in
sysfs.
It is not required to change die_id implementation from uInt to
Int because of that. Instead, let's change the parsing of the
die_id in virHostCPUGetDie() to read an integer value and, in
case it's -1, default it to zero like in case of file not found.
This is enough to solve the issue Power hosts are experiencing.
Fixes: 7b79ee2f78
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We currently don't model the 'ssh' protocol properties properly and
since it seems impossible for now (agent path passed via environment
variable). To allow libguestfs to work as it used in pre-blockdev era we
must carry the properties over to the command line. For this instance we
just store it internally and format it back.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
libguestfs abuses a quirk of qemu's parser to accept also other variants
of the 'sslverify' field which would be valid on the command line but
are not documented in the QMP schema.
If we encounter the 'off' string instead of an boolean handle it rather
than erroring out to continue support of pre-blockdev configurations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add support for parsing the recently added fields from backing file
pseudo-protocol strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some disk backends support configuring the readahead buffer or timeout
for requests. Add the knobs to the XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add possibility to specify one or more cookies for http based disks.
This patch adds the config parser, storage and validation of the
cookies.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow turning off verification of SSL cerificates add a new element
<ssl> to the disk source XML which will allow configuring the validation
process using the 'verify' attribute.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we use g_strerror exclusively, remove this unused
function.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The stub impl of virGetDeviceID just returns ENOSYS and does not
initialize the min/maj output parameters. This lead to a false
positive warning on mingw about possible use of uninitialized
variables.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If a disk has persistent reservations enabled, qemu-pr-helper
might open not only /dev/mapper/control but also individual
targets of the multipath device. We are already querying for them
in CGroups, but now we have to create them in the namespace too.
This was brought up in [1].
1: https://bugzilla.redhat.com/show_bug.cgi?id=1711045#c61
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Lin Ma <LMa@suse.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
We want a way to easily run a private GMainContext in a
thread, with correct synchronization between startup
and shutdown of the thread.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virbpf module wraps syscalls to BPF. However, if the kernel
headers used at the compile time don't have support for BPF the
module offers stubs which return a negative one to signal error
to the caller. But there is a slight discrepancy between real
functions and these stubs. While the former set errno and return
-1 the latter report an error (without setting the errno) and
return -1. This is not optimal because the caller might see stale
errno and overwrite the error message with a less accurate one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In the virCgroupV2DevicesAvailable() function we try to determine
whether CGroups version 2 are available. We do this by opening
what we believe is the CGroup mount point and issuing a BPF call.
When the call fails, a debug message is printed. However, the BPF
call sets errno too. Include it in the debug message to help us
with debugging.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Virtualization event types were added in 2.0.5:
https://github.com/linux-audit/audit-userspace/commit/3755e9ff
Even Ubuntu 14.04 (which we don't support) has 2.3.2.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When spawning a thread via our virThread APIs we let pthread
spawn this helper thread which sets couple of thread local
variables (e.g. thread job name or thread worker name) and as of
v6.1.0-40-gc85256b31b it also sets pthread name (which is then
visible in `ps' output for instance). Only after these steps the
intended function is called. However, just before calling it we
free the buffer that holds the thread name which results in
invalid memory reads:
==47027== Invalid read of size 1
==47027== at 0x48389C2: strlen (vg_replace_strmem.c:459)
==47027== by 0x58BB3D6: __vfprintf_internal (vfprintf-internal.c:1645)
==47027== by 0x58CE6E0: __vasprintf_internal (vasprintf.c:57)
==47027== by 0x574BA28: g_vasprintf (in /usr/lib64/libglib-2.0.so.0.6000.7)
==47027== by 0x57240CC: g_strdup_vprintf (in /usr/lib64/libglib-2.0.so.0.6000.7)
==47027== by 0x48E0EFA: vir_g_strdup_vprintf (glibcompat.c:209)
==47027== by 0x493AA05: virLogVMessage (virlog.c:573)
==47027== by 0x493A8FE: virLogMessage (virlog.c:513)
==47027== by 0x4992FC7: virThreadJobClear (virthreadjob.c:121)
==47027== by 0x4992844: virThreadHelper (virthread.c:237)
==47027== by 0x5817496: start_thread (pthread_create.c:486)
==47027== by 0x59563CE: clone (clone.S:95)
The problem is that neither virThreadJobSetWorker() nor
virThreadJobSet() create a copy of passed name. They just set a
thread local variable to point to the buffer which is then
freed. Moving the free towards the end of the wrapper function
solves the issue.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Our implementation masks GCC warnings of uninitialized use of the passed
argument. After changing this I got a load of following warnings:
src/conf/virnetworkportdef.c: In function 'virNetworkPortDefSaveStatus':
/usr/include/glib-2.0/glib/gmem.h:136:8: error: 'path' may be used uninitialized in this function [-Werror=maybe-uninitialized]
136 | if (_p) \
| ^
src/conf/virnetworkportdef.c:447:11: note: 'path' was declared here
447 | char *path;
| ^~~~
For the curious, g_clear_pointer is still safe for arguments with
side-effect. Here's the pre-processed output of trying to do a
VIR_FREE(*(test2++)):
do {
typedef char _GStaticAssertCompileTimeAssertion_1[(sizeof *(&(*(test2++))) == sizeof (gpointer)) ? 1 : -1] __attribute__((__unused__));
__typeof__((&(*(test2++)))) _pp = (&(*(test2++)));
__typeof__(*(&(*(test2++)))) _ptr = *_pp;
*_pp = ((void *)0);
if (_ptr)
(g_free) (_ptr);
} while (0) ;
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically threads are given a name based on the C function,
and this name is just used inside libvirt. With OS level thread
naming this name is now visible to debuggers, but also has to
fit in 15 characters on Linux, so function names are too long
in some cases.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Setting the thread name makes it easier to debug libvirtd
when many threads are running.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Make it obvious that the function always returns a valid pointer and fix
all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Allow format probing to work around lazy clients which did not specify
their format in the overlay. Format probing will be allowed only, if we
are able to probe the image, the probing result was successful and the
probed image does not have any backing or data file.
This relaxes the restrictions which were imposed in commit 3615e8b39b
in cases when we know that the image probing will not result in security
issues or data corruption.
We perform the image format detection and in the case that we were able
to probe the format and the format does not specify a backing store (or
doesn't support backing store) we can use this format.
With pre-blockdev configurations this will restore the previous
behaviour for the images mentioned above as qemu would probe the format
anyways. It also improves error reporting compared to the old state as
we now report that the backing chain will be broken in case when there
is a backing file.
In blockdev configurations this ensures that libvirt will not cause data
corruption by ending the chain prematurely without notifying the user,
but still allows the old semantics when the users forgot to specify the
format.
Users thus don't have to re-invent when image format detection is safe
to do.
The price for this is that libvirt will need to keep the image format
detector still current and working or replace it by invocation of
qemu-img.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The virutil.h header defines a geteuid() macro for Windows platforms.
This fixes a few missed cases from:
commit b11e8cccdd
Author: Ján Tomko <jtomko@redhat.com>
Date: Sun Feb 16 23:09:15 2020 +0100
Remove virutil.h from all header files
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
After the split of enum functions into virenum.h,
this function does not contain anything worth including
in another header file.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Include virutil.h in all files that use it,
instead of relying on it being pulled in somehow.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Include unistd.h in all files that use it, instead
of relying on it being pulled in via virutil.h
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is nothing in the vircgroup.h header file
requiring virutil.h.
Remove it and include unistd.h in the C files.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Historically, this file was a dump for most of our helper
functions and needed almost everywhere.
With the introduction of virfile.h and virstring.h,
and more importantly, virenum.h and the introduction
of GLib, that is no longer true.
Remove its include from C files that don't even use it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Prefer g_ascii_xdigit_value to virHexToBin.
Check the return value of the function and
remove the g_ascii_isxdigit calls, since
they're done anyway internally.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Just like virhostdev, this depends on domain_conf and
it's shared by multiple hypervisor drivers.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This module depends on domain_conf and is used directly by various
hypervisor drivers.
Move it to src/hypervisor.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently they live in util/virhostdev.
However the virhostdev module is wrongly placed
in util, which is below conf/ in our hierarchy.
Move the functions that are actually used in conf/
to conf/ and remove the include of virhostdev.h
from domain_conf.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When we create the new virStorageSource from the definitions stored in
the parent we should also use the 'backingStoreRawFormat' field to
populate the format.
Callers which use virStorageSourceNewFromBacking are also fixed to stop
setting the format manually.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We store the backing file string in the structure so we should also
store the format so that callers can be simplified.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both callers pass false. Since we frown upon format probing, remove the
unused possibility to do the probing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To more closely match the previous usage in virEventPollDispatchHandles,
where called the handle callback for any revents returned by poll.
This should fix the virtlogd error on subsequent domain startup:
error: can't connect to virtlogd: Cannot open log file:
'/var/log/libvirt/qemu/f28live.log': Device or resource busy
as well as virtlogd spinning caused by virLogHandlerDomainLogFileEvent
never being called on hangup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: f8ab47cb44
Fixes: 946a25274c
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Another vircgroup helper to avoid code repetition between
the LXC and QEMU driver.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuSetupCgroupVcpuBW() and lxcSetVcpuBWLive() shares the
same code to set CPU CFS period and quota. This code can be
moved to a new virCgroupSetupCpuPeriodQuota() helper to
avoid code repetition.
A similar code is also executed in virLXCCgroupSetupCpuTune(),
but without the rollback on error. Use the new helper in this
function as well since the 'period' rollback, if not a
straight improvement for virLXCCgroupSetupCpuTune(), is
benign. And we end up cutting more code repetition.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code that calls virCgroupSetCpuShares() and virCgroupGetCpuShares()
is repeated in 4 different places. Let's put it in a new
virCgroupSetupCpuShares() to avoid code repetition.
There's a reason of why we execute a Get in the same value we
just executed Set, explained in detail by commit 97814d8ab3.
Let's add a gist of the reasoning behind it as a comment in
this new function as well.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code from qemuSetupCgroupCpusetCpus() and virLXCCgroupSetupCpusetTune()
can be centralized in a new helper called virCgroupSetupCpusetCpus().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previous patch moved all duplicated code that were setting
and getting BlkioDevice parameters to vircgroup.c. We can
turn them into static and spare a few symbols in
libvirt_private.syms.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current use of the functions that set and get
BlkioDevice attributes is doing a set(), followed by
a get() of the same parameter right after. This is done
because there is no guarantee that the kernel will accept
the desired value given by the set() call, thus we need to
execute a get() right after to get the actual value.
This patch adds helpers inside vircgroup.c to execute these
operations. Next patch will use these helpers to reduce
code repetition in LXC and QEMU files.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch pushes the isolatedPort setting from the <interface> down
all the way to the callers of virNetDevBridgeAddPort(), and sets
BR_ISOLATED on the port (using virNetDevBridgePortSetIsolated()) after
the port has been successfully added to the bridge.
Signed-off-by: Laine Stump <laine@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When this flag is set for an interface attached to a bridge, traffic
to/from the specified interface can only enter/exit the bridge via
another attached interface that *doesn't* have the BR_ISOLATED flag
set. This can be used to permit guests to communicate with the rest of
the network, but not with each other.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virPidFileReadPath() function is supposed to return 0 on
success or a negative value on failure. But the negative value
has a special meaning - it's negated errno. Therefore, when
converting string to int we shouldn't return -1 which translates
to EPERM. Returning EINVAL looks closer to the truth.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's nothing to clean up. Make it obvious what is returned.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Extract the code that directly deals with storage. This allows further
simplification and clarification of virStorageFileGetMetadataRecurse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Replacing virHashLookup by virHashHasEntry allows us to use NULL as the
payload of the hash table rather than putting a fake '1' pointer into
the table.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The path can be NULL e.g. for NBD disks. Use NULLSTR to prevent use of
NULL in %s.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Move the assignment to a place where we know that the backing store is
present rather than having to check in the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We call virStorageFileSupportsBackingChainTraversal which already checks
that the 'storageFileRead' callback is non-NULL, which in turn means
that virStorageFileRead will not return -2.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Probing by file suffix was meant to be a last resort if probing by
contents fails or is not supported. For most formats we never specified
any suffix. There's a few formats implementing both magic bytes and
suffix and finally DMG which had only suffix probing. Since suffix
probing is nowhere reliable and only one format depends on in which has a
comment that qemu doesn't do the probing either drop the whole
infrastructure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If the parsed 'raw' format JSON string has 'offset' or 'size' attributes
parse them as the format slice.
https://bugzilla.redhat.com/show_bug.cgi?id=1791788
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce virStorageSourceSlice which will store the 'offset' and 'size'
of a virStorageSource and declare it as 'sliceStorage' and 'sliceFormat'
attributes of a virStorageSource.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On FreeBSD 12 the default ulimit settings allow for 100,000
open file descriptors. As a result spawning processes in
libvirt is abominably slow. Fortunately FreeBSD has long
since provided a good solution in the form of closefrom(),
which closes all FDs equal to or larger than the specified
parameter.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since we parse attributes for 'raw' which is a format driver and thus
has nested 'file' structure we must prevent that this isn't nested
arbitrarily.
Add a flag for the function which allows parsing of 'format' type
drivers only on the first pass.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two possibilities:
1) json:{"file":{"driver":...}}
2) json:{"driver":...}
Our code didn't work properly with the second one as it was expecting
the 'file' wrapper. Conditionalize the removal to only the situation
when the top level doesn't have "driver".
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The parser was originally designed only for protocol parsers. Since
we already have 'raw' format driver in the list we'll need to be able
to parse it too. In later patches this will be used to prevent parsing
nested format drivers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Originally virStorageSourceParseBackingJSON didn't recurse, but when
the 'raw' driver support was added we need to parse it's information
which contains nested 'file' object.
Since the deflattening helper recurses already there's no need to call
it again. Move it one level up to the entry point.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are a few error messages which might want to report the original
backing store string. Pass it around rather than trying to re-generate
it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This deletes all trace of gnulib from libvirt. We still
have the keycodemapdb submodule to deal with. The simple
solution taken was to update it when running autogen.sh.
Previously gnulib could auto-trigger refresh when running
'make' too. We could figure out a solution for this, but
with the pending meson rewrite it isn't worth worrying
about, given how infrequently keycodemapdb changes.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It is no longer require since switching to the GLib based
event loop impl.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This sets the GLib event loop as the impl when calling
virEventRegisterDefaultImpl(). This remains a private
impl detail of libvirt, so applications must *NOT*
assume that a call to virEventRegisterDefaultImpl()
results in a GLib based event loop.
They should continue to use the libvirt-glib API
gvir_event_register() if they explicitly want to guarantee
a GLib event loop.
This follows the general principal that the libvirt public
API should not expose the fact that GLib is being used
internally.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The libvirt-glib project has provided a GMainContext based
event loop impl for applications. This imports it and sets
it up for use by libvirt as the primary event loop. This
remains a private impl detail of libvirt.
IOW, applications must *NOT* assume that a call to
"virEventRegisterDefaultImpl" results in a GLib based
event loop. They should continue to use the libvirt-glib
API gvir_event_register() if they explicitly want to
guarantee a GLib event loop.
This follows the general principle that the libvirt public
API should not expose the fact that GLib is being used
internally.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We need to be able to create event loop watches using the
GSource API for sockets. GIOChannel is able todo this, but
we don't want to use the GIOChannel APIs for reading/writing,
and testing shows just using its GSource APIs is unreliable
on Windows.
This patch thus creates a standalone helper API for creating
a GSource for a socket file descriptor. This impl is derived
from code in QEMU's io/channel-watch.c file that was written
by myself & Paolo Bonzini & thus under Red Hat copyright.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virFilePrintf function was a wrapper for fprintf() to provide
Windows portability, since gnulib's fprintf() replacement was
license restricted. This is no longer needed now we have the
g_fprintf function available.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
On macOS some definitions are in xlocale.h, instead of in
locale.h. GNULIB hides this difference by making the latter
include the former.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All our supported Linux distros now have this header.
It has never existed on FreeBSD / macOS / Mingw.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This addreses portability to Windows and standardizes
error reporting. This fixes a number of places which
failed to set O_CLOEXEC or failed to report errors.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This hides the differences between Windows and UNIX,
and adds standard error reporting.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Most code now uses the virProcess / virCommand APIs, so
the need for sys/wait.h is quite limited. Removing this
include removes the dependency on GNULIB providing a
dummy sys/wait.h for Windows.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Almost none of the virFDStream code will actually work
on WIN32 builds, nor is it used except for in the
virtualbox driver for screenshots. It is simpler to
wrap it all in a '#ifndef WIN32'.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Remove imports of poll.h which are redundant, and
conditionalize remaining usage that needs to compile
on Windows platforms.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use g_new0 and skip checking of the return value of keyCopy callback
as both are bound to return a valid pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tweak the return value expectation comment so that it doesn't
necessarily require to allocate memory and refactor the implementations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the glib allocation function that never returns NULL and remove the
now dead-code checks from all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a helper that concatenates the second array into the first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Always trim the full specified suffix.
All of the callers outside of tests were passing either
strlen or the actual length of the string.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Just like the existing virBufferTrim, but only
does one thing at a time.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now, that every use of virAtomic was replaced with its g_atomic
equivalent, let's remove the module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the glib helpers and remove the mention of returning NULL on failure
of virHashNew, virHashCreate and virHashCreateFull.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are a large number of different header files that
are related to the sockets APIs. The virsocket.h header
includes all of the relevant headers for Windows and UNIX
in one convenient place. If virsocketaddr.h is already
included, then there's no need for virsocket.h
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
chown and some stat constants are not available on
the Windows platform.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The O_BINARY flag is not defined on all platforms so we must
conditionalize its use once we remove GNULIB.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The O_DIRECT flag is not available on all platforms, so we
must introduce a compat define the same way gnulib does.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The O_DIRECTORY flag causes open() to return an error
if the filename is a directory. There's no obvious
reason why resctrl needs to use this, while the rest of
libvirt code does not. Removing it avoids build issues
on platforms where O_DIRECTORY is not defined, once we
remove GNULIB.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The net/if.h is not portable so we must check for its
existance and avoid using it when missing. Some use
of net/if.h was redundant and could be removed.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Many of the virProcess APIs are relying on GNULIB providing
POSIX API stubs. Even with these stubs the APIs don't do
anything useful once compiled. We can thus conditionalize
the code so that we don't compile anything at all.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Cygwin is not a supported build platform for libvirt and
has no testing coverage in our CI systems. Stop pretending
the code is usable and remove it so there is less to port
to Meson.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A large part of the virCommand code is still built on
WIN32, despite the fact that the core fork() & execve()
functions are not available. So despite succesfully
building most of the code, at runtime the APIs are
none the less unusuable. With the elimination of GNULIB
many of the APIs being used in this code no longer have
portability wrappers/shims for Windows.
Rather than try to add portability wrappers, or do tests
for each individual function, it is clearer to conditionalize
nearly all of the code using #ifdef WIN32.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_mkdir() provides portability to Windows platforms.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The sys/uio.h header is only needed when building logging
code with journald support enabled. Conditionally include
it so that we avoid break on platforms which lack this
header.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a simplified variant of gnulib's passfd module
without the portability code that we do not require.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virProcess code relies on windows.h and is getting it
indirectly via some GNULIB header fixes. This dependancy
needs to be made explicit.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The mgetgroups function is a GNULIB custom wrapper around
getgrouplist(). This implements a simplified version of
that code directly.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The strchrnul function doesn't exist on Windows and rather
than attempt to implement it, it is simpler to just avoid
its usage, as any callers are easily adapted.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This imports a simpler version of GNULIB's getpass() function
impl for Windows. Note that GNULIB's impl was buggy as it
returned a static string on UNIX, and a heap allocated string
on Windows. This new impl always heap allocates.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of relying on GNULIb's uname() impl, directly use the
Windows API for determining CPU architecture.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For qemu object like rng-builtin, there are no properties after id
property. We should always set comma after object id. Otherwise it will
cause trailing comma on object:
-object rng-builtin,id=ID,
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If we get a user reporting this error message being shown it's pretty
useless in terms of actually debugging it since we don't know which hash
and which key are actually subject to the error.
This patch adds a new hash table callback which formats the
user-readable version of the hash key and reports it in the new message
which will look like:
"Duplicate hash table key 'blah'"
That way we will at least have an anchor point where to start the
search.
There are two special implementations of keys which are numeric so we
add specific printer functions for them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit <60d9ad6f1e42618fce10baeb0f02c35e5ebd5b24> we require
GnuTLS and since commit <ac0d21c762351f58dd5d2dafa2014ed48a8b49f3>
we can actually drop the usage of WITH_GNUTLS.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function virSecretGetSecretString calls into secret driver and is
used from other hypervisors drivers and as such makes more sense in
util.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Remove many imports of sys/ioctl.h which are redundant,
and conditionalize remaining usage that needs to compile
on Windows platforms.
The previous change to remove the "nonblocking" gnulib
module indirectly caused the loss of the "ioctl" gnulib
module that we did not explicitly list in bootstrap.conf
despite relying on.
Rather than re-introduce the "ioctl" module this patch
makes it redundant.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When parsing legacy NBD backing file strings such as
'nbd:unix:/tmp/sock:exportname=/' we'd fail to set the transport to
VIR_STORAGE_NET_HOST_TRANS_UNIX. This started to be a problem once we
actually started to generate config of the backing store on the command
line with -blockdev as the JSON code would try to format it as TCP and
fail with:
internal error: argument key 'host' must not have null value
Set the type properly and add a test.
This bug was found by the libguestfs test suite in:
https://bugzilla.redhat.com/show_bug.cgi?id=1791614
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reported-by: Ming Xie <mxie@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
gmtime_r/localtime_r are mostly used in combination with
strftime to format timestamps in libvirt. This can all
be replaced with GDateTime resulting in simpler code
that is also more portable.
There is some boundary condition problem in parsing POSIX
timezone offsets in GLib which tickles our test suite.
The test suite is hacked to avoid the problem. The upsteam
GLib bug report is
https://gitlab.gnome.org/GNOME/glib/issues/1999
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The GNULIB termios module ensures termios.h exists (but
is none the less empty) when building for Windows. We
already exclude usage of the functions that would exist
in a real termios.h, so having an empty termios.h is
not especially useful.
It is simpler to just put all use of termios.h related
functions behind a "#ifndef WIN32" conditional.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
G_STATIC_ASSERT() is a drop-in functional equivalent of
the GNULIB verify() macro.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Libvirt's original atomic ops impls were largely copied
from GLib's code at the time. The only API difference
was that libvirt's virAtomicIntInc() would return a
value, but g_atomic_int_inc was void. We thus use
g_atomic_int_add(v, 1) instead, though this means
virAtomicIntInc() now returns the original value,
instead of the new value.
This rewrites libvirt's impl in terms of g_atomic_int*
as a short term conversion. The key motivation was to
quickly eliminate use of GNULIB's verify_expr() macro
which is not a direct match for G_STATIC_ASSERT_EXPR.
Long term all the callers should be updated to use
g_atomic_int* directly.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We don't need all the platforms gnulib deals with, so
this is a cut down version of GNULIB's physmem.c
code. This also allows us to integrate libvirt's
error reporting functions closer to the error cause.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert to use socket wrappers. Aside from the header file
include change, this requires changing close -> closesocket
since our portability isn't trying to replace the close
function.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Windows sockets take a SOCKET HANDLE object instead of a
file descriptor. Wrap them in the same way that gnulib
does so that they use C runtime file descriptors.
While we could in theory use GSocket, it is hard to get
the exact same semantics libvirt has for its current
socket usage. Wrapping the Winsock2 APIs is thus the
easiest approach in the short term.
In changing the socke wrappers we need to re-implement
the nonblocking function too, since the GNULIB impl
expects to be used with the GNULIB sockets wrappers.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All UNIX platforms we care about have openpty() in the libutil
library. Use of pty.h must also be made conditional, excluding
Win32.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a vastly simpler VIR_INT64_STR_BUFLEN constant
which is large enough for all cases where we currently
use INT_BUFSIZE_BOUND. This eliminates most use of the
gnulib intprops.h header.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Update the host CPU code to report the die_id in the NUMA topology
capabilities. On systems with multiple dies, this fixes the bug
where CPU cores can't be distinguished:
<cpus num='12'>
<cpu id='0' socket_id='0' core_id='0' siblings='0'/>
<cpu id='1' socket_id='0' core_id='1' siblings='1'/>
<cpu id='2' socket_id='0' core_id='0' siblings='2'/>
<cpu id='3' socket_id='0' core_id='1' siblings='3'/>
</cpus>
Notice how core_id is repeated within the scope of the same socket_id.
It now reports
<cpus num='12'>
<cpu id='0' socket_id='0' die_id='0' core_id='0' siblings='0'/>
<cpu id='1' socket_id='0' die_id='0' core_id='1' siblings='1'/>
<cpu id='2' socket_id='0' die_id='1' core_id='0' siblings='2'/>
<cpu id='3' socket_id='0' die_id='1' core_id='1' siblings='3'/>
</cpus>
So core_id is now unique within a (socket_id, die_id) pair.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is a lots of possibilities to retrieve hostname information
from domain. Libvirt could use lease information from dnsmasq to
get current hostname too. QEMU supports QEMU-agent but it can use
lease source.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
A new helper for trimming combinations of specified characters from
the tail of the buffer.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This leaks the FD of BPF map which means it will not be freed.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In v5.0.0-rc1~94 we switched from one huge switch() to an array
for translating error numbers into error messages. However, the
array is declared to have VIR_ERR_NUMBER_LAST items which makes
it impossible to spot this place by compile checking when adding
new error number.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Mention the knowledge base article which has tips how to fix the backing
chain to work with current libvirt.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The idea is to offer callers an init function that they can call
independently to ensure that the global variables get
initialized.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
GLib header files annotate every API with a version number.
It is possible to define some constants before including
glib.h which will result in useful compile time warnings.
Setting GLIB_VERSION_MIN_REQUIRED will result in a warning
if libvirt uses an API that was deprecated in the declared
version, or before. Such API usage should be rewritten to
use the documented new replacement API.
Setting GLIB_VERSION_MAX_ALLOWED will result in a warning
if libvirt uses an API that was not introduced until a
version of GLib that's newer than our minimum declared
version. This avoids accidentally using functionality
that is not available on some supported platforms.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_canonicalize_filename was not introduced until glib 2.58
so we need a temporary backport of its impl.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_fsync was introduced in 2.63 which is newer than our minimum
glib version. A future commit will introduce compile time
checking of API versions to prevent accidental usage of APIs
from glib newer than our min declared.
To avoid triggering this warning, however, we need to ensure
that we always use our wrapper function via glibcompat.c,
which will disable the API version warnings.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When allowing/denying a device in devices CGroupV2 we have to
write a BPF program for it. The program we put there is merely
static and all it does it looks up a device in a hash table (also
known as map in BPF terminology). A map is referenced via an FD
which can be acquired via virBPFCreateMap() and like any other FD
it should be closed when no longer needed. However, we close it
twice: the first time in virCgroupV2DevicesAttachProg() which
closes it unconditionally, and the second time in either
virCgroupV2DevicesCreateProg() or
virCgroupV2DevicesPrepareProg(). Remove the second close.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This function is not called outside of the source file where it's
defined. There's no need to export it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The underlying resctrl monitoring is actually using 64 bit counters,
not the 32bit one. Correct this by using 64bit data type for reading
hardware value.
To keep the interface consistent, the result of CPU last level cache
that occupied by vcpu processors of specific restrl monitor group is
still reported with a truncated 32bit data type. because, in silicon
world, CPU cache size will never exceed 4GB.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Note the glib function returns a const string because it
caches the hostname using a one time thread initializer
function.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The canonicalize_file_name(path) is equivalent to calling
realpath(path, NULL). Passing NULL for the second arg of
realpath is not standardized behaviour, however, Linux,
FreeBSD > 6.4 and macOS > 10.5 all support this critical
extension.
This leaves Windows which doesn't provide realpath at all.
The g_canonicalize_filename() function doesn't expand
symlinks, so is not strictly equivalent to realpath()
but is close enough for our Windows portability needs
right now.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
commandhelper.c is not converted since this is a standalone
program only run on UNIX, so can rely on getcwd().
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
