The first thread to issue a client RPC request will own the event
loop execution, sitting in the virNetClientIOEventLoop function.
It releases the client lock while running:
virNetClientUnlock()
g_main_loop_run()
virNetClientLock()
If a second thread arrives with an RPC request, it will queue it
for the first thread to process. To inform the first thread that
there's a new request it calls g_main_loop_quit() to break it out
of the main loop.
This works if the first thread is in g_main_loop_run() at that
time. There is a small window of opportunity, however, where
the first thread has released the client lock, but not yet got
into g_main_loop_run(). If that happens, the wakeup from the
second thread is lost.
This patch deals with that by changing the way the wakeup is
performed. Instead of directly calling g_main_loop_quit(), the
second thread creates an idle source to run the quit function
from within the first thread. This guarantees that the first
thread will see the wakeup.
Tested by: Fima Shevrin <efim.shevrin@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When VIR_DOMAIN_BLOCK_RESIZE_CAPACITY is set, the 'size' parameter
is currently ignored. Since applications must none the less pass a
value for this parameter, it is preferrable to declare some explicit
semantics for it.
This declare that the parameter must be 0, or the exact size of the
underlying block device. The latter gives the management application
the ability to sanity check that the block device size matches what
they think it should be.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
These are special in that, when a new target is introduced, some
preparation is needed before the changes can be merged. Since
this only happens every six months or so, it's unsurprising that
we keep messing it up and forgetting some steps. Having notes
right in the file will hopefully help going forward.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These are jobs are supposed to be running tests using a QEMU
binary built from the latest upstream sources, but right now
they're just doing the same thing as the other jobs for the
target. Use the correct job templates.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Notable changes compared to 7.0.0, the most recent version that
we had capabilities for until now:
* SPICE support is no longer compiled in. CCID devices are
also affected as they are implemented using libcacard,
which is part of SPICE;
* uses of -no-acpi are replaced with -M virt,acpi=off;
* -netdev uses JSON.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The vexpress machine has never supported ACPI. This fact has
been silently ignored by QEMU so far, but recent versions have
started reporting attempts to use the combination as an error.
The other features (APIC, PAE) are also not relevant to the
vexpress machine, or the QEMU driver.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
During post-copy migration (once it actually switches to post-copy mode)
dirty memory pages are continued to be migrated iteratively, while the
destination can explicitly request a specific page to be migrated before
the iterative process gets to it (which happens when a guest wants to
read a page that was not migrated yet). Without the postcopy-preempt
capability enabled such pages need to wait until all other pages already
queued are transferred. Enabling this capability will instruct the
hypervisor to create a separate migration channel for explicitly
requested pages so that they can preempt the queue.
The only requirement for the feature to work is running a migration over
a protocol that supports multiple connections. In other words, we can't
pre-create the connection and pass its file descriptor to QEMU (i.e.,
using MIGRATION_DEST_CONNECT_SOCKET), but we have to let QEMU open the
connections itself (using MIGRATION_DEST_SOCKET). This change is applied
to all post-copy migrations even if postcopy-preempt is not supported to
avoid making the code even uglier than it is now. There's no real
difference between the two methods with modern QEMU (which can properly
report connection failures) anyway.
This capability is enabled for all post-copy migration as long as the
capability is supported on both sides of migration.
https://issues.redhat.com/browse/RHEL-7100
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We enable various migration capabilities according to the flags passed
to a migration API. Missing support for such capabilities results in an
error because they are required by the corresponding flag. This patch
adds support for additional optional capability we may want to enable
for a given API flag in case it is supported. This is useful for
capabilities which are not critical for the flags to be supported, but
they can make things work better in some way.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The migration cookie contains two bitmaps of migration capabilities:
supported and automatic. qemuMigrationParamsCheck expects the letter so
lets make it more obvious by renaming the parameter as remoteAuto.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add validation and formatting of the commandline arguments for
'iothread-vq-mapping' parameter. The validation logic mirrors what qemu
allows.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a new <iothreads> sub-element of disk's <driver> which will
allow configuring multiple iothreads and also map them to specific
virt-queues of virtio devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability represents the support for mapping virtqueues to
iothreads for the 'virtio-blk' device.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rework the helper to use a GPtrArray structure to simplify callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add data for the qemu-9.0 development cycle based on
'v8.2.0-196-g7425b6277f'
Notable changes:
- new machine types added
- 'iommufd' object added
- 'vfio-pci' device added 'fd' and 'iommufd' properties
- 'virtio-blk-pci' device added 'iothread-vq-mapping' property
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than always binding to the vfio-pci driver, use the new
function virPCIDeviceFindBestVFIOVariant() to see if the running
kernel has a VFIO variant driver available that is a better match for
the device, and if one is found, use that instead.
virPCIDeviceFindBestVFIOVariant() function reads the modalias file for
the given device from sysfs, then looks through
/lib/modules/${kernel_release}/modules.alias for the vfio_pci alias
that matches with the least number of wildcard ('*') fields.
The appropriate "VFIO variant" driver for a device will be the PCI
driver implemented by the discovered module - these drivers are
compatible with (and provide the entire API of) the standard vfio-pci
driver, but have additional device-specific APIs that can be useful
for, e.g., saving/restoring state for migration.
If a specific driver is named (using <driver model='blah'/> in the
device XML), that will still be used rather than searching
modules.alias; this makes it possible to force binding of vfio-pci if
there is an issue with the auto-selected variant driver.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This patch makes it possible to manually specify which VFIO variant
driver to use for PCI hostdev device assignment, so that, e.g. you
could force use of a VFIO "variant" driver, with e.g.
<driver model='mlx5_vfio_pci'/>
or alternately to force use of the generic vfio-pci driver with
<driver model='vfio-pci'/>
when libvirt would have normally (after applying a subsequent patch)
found a "better match" for a device in the active kernel's
modules.alias file. (The main potential use of this manual override
would probably be to work around a bug in a new VFIO variant driver by
temporarily not using that driver).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The long-deprecated use of <driver name='vfio|xen|kvm'/> in domain xml
for <hostdev> devices was only ever necessary during the period when
libvirt (and the Linux kernel) supported both VFIO and "legacy KVM"
styles of hostdev device assignment for QEMU. This became pointless
many years ago when legacy KVM device assignment was removed from the
kernel, and support for that style of device assignment was completely
disabled in the libvirt source in 2019 (commit
v5.6.0-316-g2e7225ea8c).
Nevertheless, there were instances of <driver name='vfio'/> in the
unit test data that were then (unnecessarily) propagated to several
more tests over the years. This patch cleans out those unnecessary
explicit settings of driver name='vfio' in all QEMU unit test data,
proving that the attribute is no longer (externally) needed. (A later
patch which adds a 2nd attribute to the <driver> element will include
a test case that explicitly exercises the driver name attribute).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Xen only supports a single type of PCI hostdev assignment, so it is
superfluous to have <driver name='xen'/> peppered throughout the
config. It *is* necessary to have the driver type explicitly set in
the hostdev object before calling into the hypervisor-agnostic "hostdev
manager" though (otherwise the hostdev manager doesn't know whether it
should do Xen-specific setup, or VFIO-specific setup).
Historically, the Xen driver has checked for "default" driver name
(i.e. not set in the XML), and set it to "xen', during the XML
postparse, thus guaranteeing that it will be set by the time the
object is sent to the hostdev manager at runtime, but also setting it
so early that a simple round-trip of parse-format results in the XML
always containing an explicit <driver name='xen'/>, even if that
wasn't specified in the original XML.
The QEMU driver *doesn't* set driver.name during postparse though;
instead, it waits until domain startup time (or device attach time for
hotplug), and sets the driver.name then. The result is that a
parse-format round trip of the XML in the QEMU driver *doesn't* add in
the <driver name='vfio'/>.
This patch modifies the Xen driver to behave similarly to the QEMU
driver - the PostParse just checks for a driver.name that isn't
supported by the Xen driver, and any explicit setting to "xen" is
deferred until domain runtime rather than during the postparse, thus
Xen domain XML also doesn't get extraneous <driver name='xen'/>.
This delayed setting of driver.name of course results in slightly
different xml2xml parse-format results, so the unit test data is
modified accordingly.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
virHostdevIsVFIODevice() and virDomainDefHasVFIOHostdev() are only ever
called from the QEMU driver, and in the case of the QEMU driver, any
PCI hostdev by definition uses VFIO, so really all these callers only
need to know if the device is a PCI hostdev.
(It turned out that the less specific virHostdevIsPCIDevice() already
existed in hypervisor/virhostdev.c, so I had to remove one of them;
since conf is a lower level directory than hypervisor, and the
function is called from conf, keeping the copy in hypervisor would
have required moving its caller (virDomainDefHasPCIHostdev()) into
hypervisor as well, so I just removed the copy in hypervisor.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now if a new attribute is added to <driver>, we only need to update
the formatting/parsing in one place.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This is done so that we can re-use the same parser/formatter for
<network> and <networkport>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The next step in consolidating parsing/formatting of the <driver>
element of these objects using a common struct and common code. This
eliminates the virNetworkForwardDriverNameType enum which is nearly
identical to virDeviceHostdevPCIDriverName (the only non-identical bit
was just because they'd gotten out of sync over time) and replaces its
uses with a virDeviceHostdevPCIDriverInfo (which is a struct that
contains a virDeviceHostdevPCIDriverName).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The new struct is virDeviceHostdevPCIDriverInfo, and the "backend"
enum in the hostdevDef will be replaced with a
virDeviceHostdevPCIDriverInfo named "driver'. Since the enum value in
this new struct is called "name", it means that all references to
"backend" will become "driver.name".
This will allow easily adding other items for new attributes in the
<driver> element / C struct, which will be useful once we are using
this new struct in multiple places.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The hostdev version of the <driver> subelement appears in four places:
* The domain XML in the <hostdev> and <interface type='hostdev'>
elements (that's 2)
* The network XML inside <forward> when the network is a pool of
SRIOV VFs
* the <networkport> XML, which is used to communicate between the
hypervisor driver and network driver.
In order to make the pending addition of a new attribute to <driver>
in all these cases simpler, this patch refactors the parsing of
<driver> in all four places to use virXMLProp*() and
virXMLFormatElement().
Making all of the different instances of the separate parse/format for
<driver> look nearly identical will make it easier to see that the
upcoming patch that converges all four to use a common
parser/formatter is a functional NOP.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently this enum is defined in domain_conf.h and named
virDomainHostdevSubsysPCIDriverType. I want to use it in parts of the
network and networkport config, so am moving its definition to
device_conf.h which is / can be included by all interested parties,
and renaming it to match the name of the corresponding XML attribute
("driver name"). The name change (which includes enum values) does cause a
lot of churn, but it's all mechanical.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The exact same element can appear in <hostdev> and <interface
type='hostdev'>, and nearly identical in <network> and <networkport>
(these latter two don't include "xen" as a possible driver, but that's
coincidental - there's no reason Xen couldn't also use the VF pools in
virtual networks, it just doesn't).
This patch modifies all 4 to use the same <ref name="hostdevDriver"/>
so that it is simpler to add something new.
A side effect of this patch is that the grammar for the <interface>
element in domain XML has been tightened up a bit - previously it was
accepted by the schema (but nonsensical) to have virtio and network
interface options specified; as a part of making the two different
<driver> choices each a complete element (rather than each being a
collection of attributes and subelements) these extra
attributes/subelements that were irrelevant to the hostdev-type
<driver> were made to be valid only for an emulated interface's
<driver>.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Historically libvirt hasn't differentiated between the name of a
loadable kernel module, and the name of the device driver that module
implements, but these two names can be (and usually are) at least
subtly different.
For example, the loadable module called "vfio_pci" implements a PCI
driver called "vfio-pci". We have always used the name "vfio-pci" both
to load the module (with modprobe) and to check (in
/sys/bus/pci/drivers) if the driver is available. (This has happened
to work because modprobe "normalizes" all the names it is given by
replacing "-" with "_", so "vfio-pci" works for both loading the
module and checking for the driver.)
When we recently gained the ability to manually specify the driver for
"virsh nodedev-detach", the fragility of this system became apparent -
if a user gave the "driver name" as "vfio_pci", then we would modprobe
the module correctly, but then erroneously believe it hadn't been
loaded because /sys/bus/pci/drivers/vfio_pci didn't exist. For manual
specification of the driver name, we could deal with this by telling
the user "always use the correct name for the driver, don't assume
that it has the same name as the module", but it would still end up
confusing people, especially since some drivers do use underscore in
their name (e.g. the mlx5_vfio_pci driver/module).
This will only get worse when an upcoming patch starts automatically
determining the driver to use for VFIO-assigned devices - it will look
in the kernel's modules.alias file to find "best" VFIO variant
*module* for a device, and 3 out of 4 current examples of
vfio-pci/variant drivers have a mismatch between module name and
driver name, so the current code would end up properly loading the
module, but then erroneously think that the driver wasn't available.
This patch makes the code more forgiving by
1) checking for both $drivername and underscore($drivername) in
/sys/bus/pci/drivers
2) when we determine a module needs to be loaded, look at the link in
/sys/module/$modulename/driver/pci:$drivername to determine the
name of the driver we need to bind to the device(rather than just
assuming the driver has the same name as the module
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently we only append a newline to 'actual' if 'expected'
(as loaded from file) already ends in a newline, but that
results in inconsistent behavior.
For example, some of the test files used by virhostcputest are
newline-terminated and some aren't. If we were to remove
existing newlines from those files or add them where they
aren't present, the test would still pass, and even using
VIR_TEST_REGENERATE_OUTPUT=1 wouldn't change them back.
Make things consistent by ensuring that 'actual' is always
newline-terminated. The only exception is when 'actual' is
completely empty: in that case, we want the file to be actually
empty, not contain a single empty line. query-jobs-empty.result
in qemumonitorjsondata/ is an example of this being used.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test still passes after deleting them, which seems to
indicate that they're unnecessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
rhel-8 lacks 'pidfd_open()' support and thus nbdkit can't be enabled
there.
mingw builds explicitly disable nbdkit support, but use
'--auto-features=enabled' thus omitting setting of
'nbdkit_config_default' results in meson thinking we want to enable it:
../meson.build:1018:2: ERROR: Problem encountered: nbdkit_config_default requires nbdkit to be enabled
Disable it explicitly. The meson logic might need to be fixed eventually
when switching it on by default.
Fixes: 9eabf14afb
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
To prevent regressions when refactoring tests and accidentally forgotten
input files make sure that qemuxml2argvtest is invoked for all input
files in tests/qemuxml2argvdata
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than completely compiling out the tests mark them as skipped.
This will allow us to add a checker that all input files are accounted
for.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the rest of test cases which were tested only by qemuxml2xmltest.
All test cases added here have a '<interface type="network"' which needs
to be translated using the new fake network driver.
Note that this captures the status quo of the tests. No care was given
whether the tests make sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add versions stripping vlans and bandwidth setup so that they can be
used in qemuxml2argvtest for interfaces which don't support the above.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the data from 'nat-network' network definition to enable the test
case also for xml2argvtest.
Since the network listen bit doesn't need any plug definition just use
an empty string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to be able to use '<interface type="network"' we need a fake
network driver in qemuxml2argvtest. Create one by simply allowing users
to reuse configs from tests/networkxml2xmlin and tests/virnetworkportxml2xmldata
which will be returned to corresponding functions.
The driver implements:
.networkLookupByName = fakeNetworkLookupByName,
- validate syntax of network name, check if config exists
.networkGetXMLDesc = fakeNetworkGetXMLDesc,
- return appropriate XML
.networkPortCreateXML = fakeNetworkPortCreateXML,
- validate that port XML exists
.networkPortGetXMLDesc = fakeNetworkPortGetXMLDesc,
- return appropriate port XML
With the above and the correspondign test data, all network XMLs can be
enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unfortunately the network backend commandline formatter attempts to also
setup the backend itself, which it really should not.
For now make sure qemuxml2argvtest can call virNetDevSetMTU.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Separate the SLIRP bits from 'qemuProcessNetworkPrepareDevices' and do
the setup of the internal data when setting up domain data.
This will allow tests to use the same code path to lookup data for a
network.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Everything this XML tests is already explicitly covered in other tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modify the test case so that it can be used also for qemuxml2argvtest
by removing invalid configuration (interface type='user' + queues),
clean up unneeded disks and rename it accordingly. Also test the
ioeventfd.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Test both linkstates in an explicit test case. Note that link state is
setup via monitor, thus not visible on the commandline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The tested configuration is not valid for a qemu VM. Move it to the
generic test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There were plenty of test cases invoked only from qemuxml2xmltest but
not from qemuxml2argvtest, either by accident or it was deemed unneeded.
Bulk-add all test cases which fit the above description which don't
require faking the network driver. Use same invocation as present in
qemuxml2xmltest.
Arguably in certain cases we could move the test case to
genericxml2xmltest, but this covers the cases when that would not be
appropriate.
Tests requiring the network driver will be bulk-added when the fake
network driver will be implemented.
This patch also allows the use of FLAG_SKIP_CONFIG_ACTIVE in
qemuxml2argvtest although the flag will be dormant for now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
