Commit Graph

634 Commits

Author SHA1 Message Date
Daniel P. Berrange
4d6050a8eb Rename event_poll.{c,h} to vireventpoll.{c,h} 2012-12-21 11:17:13 +00:00
Daniel P. Berrange
04d9510f50 Rename command.{c,h} to vircommand.{c,h} 2012-12-21 11:17:13 +00:00
Daniel P. Berrange
2005f7b552 Rename buf.{c,h} to virbuffer.{c,h}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-12-21 11:17:12 +00:00
Daniel P. Berrange
a27e4fbb72 Rename bitmap.{c,h} to virbitmap.{c,h}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-12-21 11:17:12 +00:00
Ján Tomko
8d0e7eb4c1 virsh: use vshReconnect for non-default connections too
For non-default connections (specified by the environment variable or
the command line option) we call virConnectOpenAuth without registering
the vshCatchDisconnect callback.

This calls vshReconnect instead which takes care of it.
2012-12-13 16:39:38 +01:00
Ján Tomko
d94b501b7b virsh: don't lie about reconnection in vshReconnect
Since we (ab)use vshReconnect for the default URI connection, if it
fails it might print 'Failed to reconnect to the hypervisor' even if we
were never connected before.

This changes it to only mention reconnection on the first try after
getting disconnected.
2012-12-13 16:39:38 +01:00
Peter Krempa
989a427de8 virsh: Fix usage of header termios.h
The termios struct exported by the termios.h header is used as an
argument for vshMakeStdinRaw(). The header isn't used anywhere in
tools/virsh-domain.c.

This patch adds the header to the header declaring vshMakeStdinRaw() and
removes other places in virsh.
2012-12-07 14:21:25 +01:00
Peter Krempa
bf72095954 virsh: Report errors if arguments of the schedinfo command are incorrect
Libvirt's helper API's when called directly don't raise the error so
that virsh remembers it. Subsequent calls to libvirt API's might reset
the error.

In case of schedinfo virDomainFree() in the cleanup section resets the
error when virTypedParameterAssignFromStr() fails.

This patch adds function vshSaveLibvirtError() that can be called after
calling libvirt helper APIs to ensure the error is remembered.
2012-12-03 16:37:10 +01:00
Ján Tomko
8b235d4057 virsh: do timing even for unusable connections
Time values were uninitialized if the connection wasn't usable.
2012-11-29 10:10:08 -07:00
Eric Blake
9d91a18ebf virsh: make ,, escape parsing common
So far, none of the existing callers of vshStringToArray expected
the user to ever pass a literal comma; meanwhile, snapshot parsing
had rolled its own array parser.  Moving the comma escaping into
the common function won't affect any existing callers, and will make
this function reusable for adding memory handling to snapshot parsing.

As a bonus, the testsuite was already testing snapshot parsing, so
the fact that the test still passes means that we are now giving
testsuite exposure to vshStringToArray.

* tools/virsh-snapshot.c (vshParseSnapshotDiskspec): Move ,,
parsing...
* tools/virsh.c (vshStringToArray): ...into common function.
Also, vshStrdup can't fail.
2012-11-07 09:01:37 -07:00
Daniel P. Berrange
1c04f99970 Remove spurious whitespace between function name & open brackets
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-11-02 13:36:49 +00:00
Eric Blake
4dbd6e9654 build: prefer mkostemp for multi-thread safety
https://bugzilla.redhat.com/show_bug.cgi?id=871756

Commit cd1e8d1 assumed that systems new enough to have journald
also have mkostemp; but this is not true for uclibc.

For that matter, use of mkstemp[s] is unsafe in a multi-threaded
program.  We should prefer mkostemp[s] in the first place.

* bootstrap.conf (gnulib_modules): Add mkostemp, mkostemps; drop
mkstemp and mkstemps.
* cfg.mk (sc_prohibit_mkstemp): New syntax check.
* tools/virsh.c (vshEditWriteToTempFile): Adjust caller.
* src/qemu/qemu_driver.c (qemuDomainScreenshot)
(qemudDomainMemoryPeek): Likewise.
* src/secret/secret_driver.c (replaceFile): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainScreenshot): Likewise.
2012-10-31 10:06:10 -06:00
Doug Goldstein
5a33366f5c interface: add udev based backend for virInterface
Add a read-only udev based backend for virInterface. Useful for distros
that do not have netcf support yet. Multiple libvirt based utilities use
a HAL based fallback when virInterface is not available which is less
than ideal. This implements:
* virConnectNumOfInterfaces()
* virConnectListInterfaces()
* virConnectNumOfDefinedInterfaces()
* virConnectListDefinedInterfaces()
* virConnectListAllInterfaces()
* virConnectInterfaceLookupByName()
* virConnectInterfaceLookupByMACString()
2012-10-09 09:39:43 -06:00
Eric Blake
4ecb723b9e maint: fix up copyright notice inconsistencies
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/
2012-09-20 16:30:55 -06:00
Doug Goldstein
6a1b0e37af virsh: Move daemon to misc since its not a network
Move the 'Daemon' entry to the Miscellaneous section since its not a
networking driver or component.
2012-09-19 14:19:45 -06:00
Doug Goldstein
b95ad92e05 build: define WITH_INTERFACE for the driver
Based exclusively on work by Eric Blake in a patch posted with the same
subject. However some modifications related to comments and my plans to
add another backend.

Added WITH_INTERFACE as the only automake variable deciding whether to
build the driver and using WITH_NETCF to identify that we're wanting to
use the netcf library as the backend.

* configure.ac: Added with_interface
* src/interface/netcf_driver.c: Renamed..
* src/interface/interface_backend_netcf.c: ..to this to match storage.
* src/interface/netcf_driver.h: Renamed..
* src/interface/interface_driver.h: ..to this.
* daemon/Makefile.am: Respect WITH_INTERFACE and WITH_NETCF.
* libvirt.spec.in: Add RPM support for --with-interface
2012-09-19 08:27:01 -06:00
Doug Goldstein
c88a4f2a46 virsh: Rename QEmu to QEMU to match upstream
Match upstream's naming of QEMU. There was a notice on the ML that said
the preferred spelling was QEMU a while back.
2012-09-19 06:59:19 -06:00
Osier Yang
f5fb059a78 virsh: Don't motify the const string
This improve helper vshStringToArray to accept const string as
argument instead. To not convert the const string when using
vshStringToArray, and thus avoid motifying it.
2012-09-17 11:29:31 +08:00
Osier Yang
f7eac4f722 list: Add helper to convert strings separated by ', ' to array
tools/virsh.c: New helper function vshStringToArray.
tools/virsh.h: Declare vshStringToArray.
tools/virsh-domain.c: use the helper in cmdUndefine.
2012-09-06 22:04:43 +08:00
Eric Blake
44342a0efe build: use re-entrant functions in virsh
Yesterday's commit 15d2c9f pointed out that virsh was still using
localtime(), which is not thread-safe, even though virsh is
definitely multi-threaded.  Even if we only ever triggered it from
one thread, it's better safe than sorry for maintenance purposes.

* cfg.mk (exclude_file_name_regexp--sc_prohibit_nonreentrant):
Tighten the rule.
* tools/virsh.c (vshOutputLogFile): Avoid localtime.
(vshEditWriteToTempFile, vshEditReadBackFile, cmdCd, cmdPwd)
(vshCloseLogFile): Avoid strerror.
* tools/console.c (vshMakeStdinRaw): Likewise.
* tools/virsh-domain.c (vshGenFileName): Fix spacing in previous
patch.
2012-09-05 11:09:04 -06:00
Paul Eggert
15d2c9fad4 Pass a correct pointer type to localtime_r(3).
On 09/04/2012 08:20 AM, Eric Blake wrote:
> tv_sec is required by POSIX to be
> of type time_t; so this is a bug in the OpenBSD header
> [for declaring it as long]

Most likely this problem arose because of the patch I pushed
in gnulib commit e07d7c40f3ca5ec410cf5aa6fa03cfe51e712039.
Previously, gnulib required timeval's tv_sec to be
the same size as time_t.  But now, it requires only that
tv_sec be big enough to hold a time_t.

This patch was needed for Emacs.  Without the patch, gnulib
replaced struct timeval on OpenBSD, and this messed up
utimens.c, and Emacs wouldn't build.

Alternatively, gnulib could substitute its own struct timeval
for the system's, wrapping every struct timeval-using function
(gettimeofday, futimesat, futimes, lutimes, etc.  That'd be
more work, though.  And it would introduce some performance
issues with gettimeofday, which is supposed to be fast.

I've been trying to get away from using struct timeval,
and to use the higher-resolution struct timespec instead,
so messing with these obsolescent interfaces has been
lower priority for me.  But if someone wants to take the
more-ambitious approach that'd be fine, I expect.

For this particular case, though, how about if we avoid
the problem entirely?  libvirt doesn't need to use struct
timeval here at all.  It makes libvirt smaller and probably
faster, and it ports to OpenBSD without messing with gnulib.
2012-09-04 17:20:08 -06:00
Peter Krempa
67f83cd497 virsh: remove unneeded usage of vshConnectionUsability()
Now that vshCommandRun() checks for the connection automaticaly, remove
all of the redundant checks in the code.

vshConnectionUsability() no longer needs to be exported and this patch
marks it static.
2012-08-31 16:22:22 +02:00
Peter Krempa
70e608918e virsh: Improve checking for connection when running commands
Almost each virsh command uses the function vshConnectionUsability
before doing anything, to check if the connection is "alive".  Commands
that don't need an conection are already conveniently marked with
VSH_CMD_FLAG_NOCONNECT. We can automaticaly check for the connection
before calling any remote command so we don't forget to do so.

This patch also upgrades the connection check to use virConnectIsAlive
along with the current approach.
2012-08-31 16:22:22 +02:00
Viktor Mihajlovski
641d406d27 virsh: fixed incorrect timing report
When executing virsh -t <command> the reported timing was off
by 3 orders of magnitude if the command took more than one
second.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2012-08-31 20:00:20 +08:00
Eric Blake
f95f1ba4c0 virsh: split out virsh-volume.c
Last of the file splits.

* tools/virsh-volume.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-volume.c: Likewise.
(vshCommandOptVolBy): Fix flag usage.
2012-08-21 00:23:12 -06:00
Eric Blake
c0dbd5f352 virsh: split out virsh-snapshot.c
Almost done with the splits.

* tools/virsh-snapshot.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-snapshot.c: Likewise.
2012-08-21 00:19:10 -06:00
Eric Blake
9cbb0eda92 virsh: split out virsh-secret.c
One of the simpler splits.

* tools/virsh-secret.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-secret.c: Likewise.
2012-08-21 00:16:35 -06:00
Eric Blake
ef8d35830c virsh: split out virsh-pool.c
More in a series of file splits.

* tools/virsh-pool.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-pool.c: Likewise.
(virCommandOptPoolBy): Fix flag usage.
2012-08-21 00:11:29 -06:00
Eric Blake
69af4f7cb8 virsh: split out virsh-nwfilter.c
Yet another split file.

* tools/virsh-nwfilter.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-nwfilter.c: Likewise.
2012-08-21 00:07:30 -06:00
Eric Blake
ea3cf921f2 virsh: split out virsh-nodedev.c
Another worthwhile split, needed one more public function.

* tools/virsh-nodedev.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh-nodedev.c: Use new header.
* tools/virsh.c: Likewise.
(vshTreePrint): Export.
* tools/virsh.h (vshTreePrint): Declare.
2012-08-21 00:05:53 -06:00
Eric Blake
dcff981a70 virsh: split out virsh-network.c
Another relatively easy file split.

* tools/virsh-network.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-network.c: Likewise.
(vshCommandOptNetworkBy): Update signature.
2012-08-21 00:02:09 -06:00
Eric Blake
7aeb16a8c0 virsh: split out virsh-interface.c
Another relatively easy split, since helper functions were fixed
in the previous patch.

* tools/virsh-interface.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-interface.c: Likewise.
(vshCommandOptInterfaceBy): Check flags.
2012-08-20 23:59:06 -06:00
Eric Blake
4c10b3c7da virsh: declare more common functions
In preparation for splitting virsh-interface.c, I found these
functions need to be declared in virsh.h, as well as one that
belongs more properly in virsh-domain.h.  Also, since we
use the VSH_BY* flags in more than one function, I improved
how they are used.

* tools/virsh.h (vshNameSorter, vshCmdHasOption): Declare.
(VSH_BYID): Turn into enum.
(vshCommandOptDomainBy): Move...
* tools/virsh-domain.h): ...here.
* tools/virsh.c: (vshNameSorter): Export.
(cmd_has_option): Rename...
(vshCmdHasOption): ...and export.
(vshCommandOptDomainBy): Move...
* tools/virsh-domain.c (vshCommandOptDomainBy): ...here, adjust
signature, and check flags.
* tools/virsh-network.c (vshCommandOptNetworkBy): Update callers.
* tools/virsh-nwfilter.c (vshCommandOptNWFilterBy): Likewise.
* tools/virsh-secret.c (vshCommandOptSecret): Likewise.
* tools/virsh-domain-monitor.c (includes): Likewise.
* tools/virsh-host.c (includes): Likewise.
2012-08-20 23:56:18 -06:00
Eric Blake
ae8e89fb12 virsh: split out virsh-host.c
The splits are getting easier, with fewer cleanups needed in virsh.h.

* tools/virsh-host.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh-host.c: Use new header.
* tools/virsh.c: Likewise.
2012-08-20 23:51:29 -06:00
Eric Blake
99ae57f841 virsh: split out virsh-domain-monitor.c
Another file worth compiling on its own instead of by .c inclusion.

* tools/virsh-domain-monitor.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.h (vshGetDomainDescription): Move to correct
header.
* tools/virsh-domain-monitor.c: Use new header.
* tools/virsh.c: Likewise.
* tools/virsh-domain.c: Likewise.
2012-08-20 23:39:54 -06:00
Eric Blake
521b7ab7eb virsh: drop unused headers
The previous commit now trips up 'make syntax-check' due to a useless
use of <signal.h>.

* tools/virsh.c (includes): Drop useless includes.
2012-08-20 09:57:38 -06:00
Daniel P. Berrange
6a48179803 Fix build of virsh on Win32 by moving SA_SIGINFO stub
On Win32 SA_SIGINFO is not defined, so virsh.c stub'd it out
to 0, but recent changes moved the usage out of virsh.c and
into virsh-domain.c
2012-08-20 16:00:29 +01:00
Eric Blake
e68ee5e765 virsh: use common namespacing
Convert the exported items in virsh.h to use a common 'vsh' prefix.

* tools/virsh.h (VIRSH_MAX_XML_FILE): Rename...
(VSH_MAX_XML_FILE): ...and parenthesize.
(DIFF_MSEC, CTRL_CLOSE_BRACKET): Delete.
(vshUsage, vshInit, vshDeinit, vshParseArgv): Remove prototype.
(editWriteToTempFile, editFile, editReadBackFile, prettyCapacity)
(virshReportError): Rename...
(vshEditWriteToTempFile, vshEditFile, vshEditReadBackFile)
(vshPrettyCapacity, vshReportError): ...into vsh namespace.
(jobWatchTimeoutFunc): Move to virsh-domain.c.
* tools/virsh.c (vshCommandRun): Inline former DIFF_MSEC.
(main): Inline former CTRL_CLOSE_BRACKET.
(vshUsage, vshInit, vshDeinit, vshParseArgv): Make static.
(prettyCapacity, virshReportError, editWriteToTempFile, editFile):
Fix naming, and adjust usage.
(vshAskReedit, vshCommandRun, vshEventLoop, vshInit): Adjust
usage.
* tools/virsh-domain.c (cmdAttachDevice, cmdCPUCompare)
(cmdCPUBaseline, cmdCreate, cmdDefine, cmdDetachDevice)
(cmdUpdateDevice, cmdDesc, cmdUndefine, cmdStart, cmdVcpucount)
(cmdAttachDevice, cmdDomjobinfo): Likewise.
* tools/virsh-edit.c (do): Likewise.
* tools/virsh-interface.c (cmdInterfaceDefine): Likewise.
* tools/virsh-network.c (cmdNetworkCreate, cmdNetworkDefine):
Likewise.
* tools/virsh-nodedev.c (cmdNodeDeviceCreate): Likewise.
* tools/virsh-nwfilter.c (cmdNWFilterDefine): Likewise.
* tools/virsh-pool.c (cmdPoolCreate, cmdPoolDefine)
(cmdPoolDiscoverSources, cmdPoolList): Likewise.
* tools/virsh-secret.c (cmdSecretDefine): Likewise.
* tools/virsh-snapshot.c (cmdSnapshotCreate, vshSnapshotCreate)
(vshLookupSnapshot, cmdSnapshotEdit, cmdSnapshotCurrent)
(vshGetSnapshotParent): Likewise.
* tools/virsh-volume.c (cmdVolCreate, cmdVolCreateFrom)
(cmdVolInfo, cmdVolList): Likewise.
2012-08-20 07:04:10 -06:00
Daniel P. Berrange
ee7b4e551e Make Win32 stub of vshAskReedit non-static
The main impl of vshAskReedit is non-static, so the Win32
stub must be the same
2012-08-20 13:29:14 +01:00
Eric Blake
6d96fab9cf virsh: kill some double underscores
C99 says that __foo naming is reserved for the compiler.  Besides,
we had several different styles in use; this consolidates things
to set up the typedefs up front then declare the types with
consistent naming.

* tools/virsh.h: Use consistent struct naming.
* tools/virsh.c (_vshCommandParser): Likewise.
2012-08-18 08:10:02 -06:00
Eric Blake
f4a7b87de0 virsh: split out virsh-domain.c
The virsh-domain.c file was pretty self-contained; the only
entry point was the table of command definitions.  The bulk
of this patch is making more functions in virsh.c reusable.
A later patch will clean up poor naming choices.

* tools/Makefile.am (virsh_SOURCES): Build virsh-domain.c.
* tools/virsh-domain.h: New file.
* tools/virsh.h (virshReportError, vshResetLibvirtError)
(vshAskReedit, vshStreamSink): Declare.
* tools/virsh.c: Switch from using .c to .h.
(virshReportError, vshResetLibvirtError, vshAskReedit)
(vshStreamSink, prettyCapacity): Export.
(vshCatchInt): Move...
* tools/virsh-domain.c: ...into sole user.  Use header.
2012-08-17 22:22:42 -06:00
Eric Blake
c2e494cc57 virsh: split out virsh.h
Having one .c file include another does not give any compilation
benefits; move towards modular .o files by first splitting out
reused declarations into a new virsh.h.  This patch doesn't try
very hard to see which functions are used or not, to make it
easier to review the file split.  Future patches can further trim
the header to be smaller.

* tools/Makefile.am (virsh_SOURCES): List new file, and prepare
for others.
* tools/virsh.c: Split declarations...
* tools/virsh.h: ...into new file, and make several functions
non-static.
* tools/virsh-domain-monitor.c (vshGetDomainDescription): Make
non-static.
2012-08-17 21:54:42 -06:00
Eric Blake
8e8809e131 virsh: move vshWatchJob earlier
It's easier to order things in topological order than it is to
forward declare in one file for use only by one other file.

* tools/virsh.c (vshWatchJob, parseRateStr)
(vshDomainStateToString, vshDomainStateReasonToString)
(vshDomainControlStateToString, vshDomainVcpuStateToString): Drop
useless prototypes.
* tools/virsh-domain.c (vshWatchJob): Move earlier.
2012-08-17 21:44:14 -06:00
Osier Yang
be023c0896 virsh: Add helper to avoid the strcase check for virsh-*.c
* tools/virsh.c: New macro vshStrcasecmp
* tools/virsh-domain-monitor.c: Use vshStrcasecmp instead of
                                strcasecmp
* tools/virsh-snapshot.c: Likewise
* cfg.mk: Only avoid doing strcase checking for virsh.c
2012-08-15 15:07:37 +08:00
Osier Yang
bb705e2519 Destroy virdomainlist.[ch]
As the consensus in:
https://www.redhat.com/archives/libvir-list/2012-July/msg01692.html,
this patch is to destroy conf/virdomainlist.[ch], folding the
helpers into conf/domain_conf.[ch].

* src/Makefile.am:
  - Various indention fixes incidentally
  - Add macro DATATYPES_SOURCES (datatypes.[ch])
  - Link datatypes.[ch] for libvirt_lxc

* src/conf/domain_conf.c:
  - Move all the stuffs from virdomainlist.c into it
  - Use virUnrefDomain and virUnrefDomainSnapshot instead of
    virDomainFree and virDomainSnapshotFree, which are defined
    in libvirt.c, and we don't want to link to it.
  - Remove "if" before "free" the object, as virObjectUnref
    is in the list "useless_free_options".

* src/conf/domain_conf.h:
  - Move all the stuffs from virdomainlist.h into it
  - s/LIST_FILTER/LIST_DOMAINS_FILTER/

* src/libxl/libxl_driver.c:
  - s/LIST_FILTER/LIST_DOMAINS_FILTER/
  - no (include "virdomainlist.h")

* src/libxl/libxl_driver.c: Likewise

* src/lxc/lxc_driver.c: Likewise

* src/openvz/openvz_driver.c: Likewise

* src/parallels/parallels_driver.c: Likewise

* src/qemu/qemu_driver.c: Likewise

* src/test/test_driver.c: Likewise

* src/uml/uml_driver.c: Likewise

* src/vbox/vbox_tmpl.c: Likewise

* src/vmware/vmware_driver.c: Likewise

* tools/virsh-domain-monitor.c: Likewise

* tools/virsh.c: Likewise
2012-08-14 17:27:49 +08:00
Cole Robinson
86157b594f virsh: make 'help' command ignore spurious options
Similar to the previous patch, prepending 'help' to a partial
command string doesn't cut us any slack.

$ virsh help pool-define-as --name foo --type dir
error: command 'help' doesn't support option --name

This patch adds a few hacks to make 'help' ignore everything after the
first data bit, so the above command shows help output for pool-define-as.
2012-08-13 15:33:44 -04:00
Cole Robinson
d2f971390e virsh: Convert '<cmd> --help' to 'help <cmd>'
Often times I find myself halfway through typing a long command when
I want to see 'help' output. I instinctively append '--help' to the
command I'm typing, only to get an error:

    $ virsh vol-create-as foo --help
    error: command 'vol-create-as' doesn't support option --help

This patch makes --help work in a pretty hacky way. One missing piece
here is that --help isn't listed as an option in the actual 'help <cmd>'
output, but maybe this can be a starting point for someone.
2012-08-13 15:33:44 -04:00
Cole Robinson
e7d1bdfbd2 virsh.c: Fix compiler warning
For some reason I only get this after applying subsequent upcoming
patches that touch virsh, but don't seem to actually cause the warning.

virsh.c: In function ‘vshCommandParse’:
virsh.c:2014:46: error: ‘opt_index’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
cc1: all warnings being treated as errors
2012-08-13 15:33:44 -04:00
Michal Privoznik
54b6334714 virsh: Switch to close callback
Since we've introduced close callbacks we can drop this SIGINT magic
(which doesn't work now neither) and fully utilize the new feature.
2012-08-02 19:15:16 +02:00
Osier Yang
a4bcefbcff maint: Use consistent copyright.
This is a follow up patch of commit f9ce7dad6, it modifies all
the files which declare the copyright like "See COPYING.LIB for
the License of this software" to use the detailed/consistent one.

And deserts the outdated comments like:

 * libvirt-qemu.h:
 * Summary: qemu specific interfaces
 * Description: Provides the interfaces of the libvirt library to handle
 *              qemu specific methods
 *
 * Copy:  Copyright (C) 2010, 2012 Red Hat, Inc.

Uses the more compact style like:

 * libvirt-qemu.h: Interfaces specific for QEMU/KVM driver
 *
 * Copyright (C) 2010, 2012 Red Hat, Inc.
2012-07-27 18:27:21 +08:00
Peter Krempa
3df9626c40 virsh: Refactor error clearing on graceful fallback paths
Virsh uses an error handler to save errors from libvirt. On some code
paths it's needed to clear libvirt errors and continue on fallback code
paths without reporting failure.

This patch adds function vshResetLibvirtError() that clears error
returned by libvirt and updates all places where the old two-line method
was used.
2012-07-27 10:28:22 +02:00
Ján Tomko
4fedf388f6 virsh: check if specified debug level is in range 2012-07-26 08:21:04 -06:00
Osier Yang
c4bdf307e0 virsh: Move command group definition into its own file
* virsh-domain-monitor.c: Add domMonitoringCmds
* virsh-domain.c: Add domManagementCmds
* virsh-host.c: Add hostAndHypervisorCmds
* virsh-interface.c: Add ifaceCmds
* virsh-network.c: Add networkCmds
* virsh-nodedev.c: Add nodedevCmds
* virsh-nwfilter.c: Add nwfilterCmds
* virsh-pool.c: Add storagePoolCmds
* virsh-secret.c: Add secretCmds
* virsh-snapshot.c: Add snapshotCmds
* virsh-volume.c: Add storageVolCmds
* virsh.c: Remove all the above *Cmds.
2012-07-26 12:00:43 +08:00
Osier Yang
49989d7025 virsh: Split cmds in node device group from virsh.c
Commands in node device group moved from virsh.c to virsh-nodedev.c,

* virsh.c: Remove commands in node device group.
* virsh-nodedev.c: New file, filled with commands in node device group
* po/POTFILES.in: Add virsh-nodedev.c
* cfg.mk: Skip to check config.h including for virsh-nodedev.c
2012-07-26 12:00:43 +08:00
Osier Yang
290eb0d9f2 virsh: Split cmds in host group from virsh.c
Commands in host group moved from virsh.c to virsh-host.c,

* virsh.c: Remove commands in host group.
* virsh-host.c: New file, filled with commands in host group
* po/POTFILES.in: Add virsh-host.c
* cfg.mk: Skip to check config.h including for virsh-host.c
2012-07-26 12:00:43 +08:00
Osier Yang
648ad2471b virsh: Split cmds to manage domain snapshot from virsh.c
Commands to manage domain snapshot are moved from virsh.c to
virsh-snapshot.c.

* virsh.c: Remove domain snapshot commands.
* virsh-snapshot.c: New file, filled with domain snapshot commands.
* po/POTFILES.in: Add virsh-snapshot.c
* cfg.mk: Skip strcase and config.h including checking for
          virsh-snapshot.c
2012-07-26 12:00:43 +08:00
Osier Yang
d7acdcf093 virsh: Split cmds to manage secret from virsh.c
Commands to manage secret are moved from virsh.c to virsh-secret.c,
with a few helpers for secret command use.

* virsh.c: Remove secret commands and a few helpers.
           (vshCommandOptSecret, and vshCommandOptSecretBy)
* virsh-secret.c: New file, filled with secret commands and its helpers.
* po/POTFILES.in: Add virsh-secret.c
* cfg.mk: Skip to check config.h including for virsh-secret.c
2012-07-26 12:00:43 +08:00
Osier Yang
e9d10055df virsh: Split cmds to manage network filter from virsh.c
Commands to manage network filter are moved from virsh.c to virsh-nwfilter.c,
with a few helpers for network filter command use.

* virsh.c: Remove network filter commands and a few helpers.
           (vshCommandOptNWFilter, and vshCommandOptNWFilterBy)
* virsh-nwfilter.c: New file, filled with network filter commands and its helpers.

* po/POTFILES.in: Add virsh-nwfilter.c

* cfg.mk: Skip to check config.h including for virsh-nwfilter.c
2012-07-26 12:00:42 +08:00
Osier Yang
0c39ea2fa5 virsh: Split cmds to manage host interface from virsh.c
Commands to manage host interface are moved from virsh.c to
virsh-interface.c, with a few helpers for interface command use.

* virsh.c: Remove interface commands and a few helpers.
           (vshCommandOptInterface, vshCommandOptInterfaceBy)
* virsh-interface.c: New file, filled with interface commands and
                     its helpers.
* cfg.mk: Skip to check config.h including for virsh-interface.c
* po/POTFILES.in: Add virsh-interface.c
2012-07-26 12:00:27 +08:00
Osier Yang
0510f97e73 virsh: Split cmds to manage network from virsh.c
Commands to manage network are moved from virsh.c to virsh-network.c,
with a few helpers for network command use.

* virsh.c: Remove network commands and a few helpers.
* virsh-network.c: New file, filled with network commands and its
                   helpers.
* po/POTFILES.in: Add virsh-network.c
* cfg.mk: Skip to check config.h including for virsh-network.c
2012-07-26 11:57:58 +08:00
Osier Yang
2f033890c6 virsh: Split cmds of storage pool group from virsh.c
This splits commands of storage pool group into virsh-pool.c,
The helpers not for common use are moved too. Standard copyright
is added for the new file.

* tools/virsh.c:
  Remove commands for storage storage pool and a few helpers.
  (vshCommandOptVol, vshCommandOptVolBy).

* tools/virsh-pool.c:
  New file, filled with commands of storage pool group and its
  helpers.

* po/POTFILES.in:
  Add virsh-pool.c

* cfg.mk:
  Skip to check config.h including for virsh-pool.c
2012-07-26 11:57:51 +08:00
Osier Yang
9fbb344f6e virsh: Split cmds of storage volume group from virsh.c
This splits commands of storage volume group into virsh-volume.c,
The helpers not for common use are moved too. Standard copyright
is added for the new file.

* tools/virsh.c:
  Remove commands for storage storage volume and a few helpers.
  (vshCommandOptVol, vshCommandOptVolBy).

* tools/virsh-volume.c:
  New file, filled with commands of storage volume group and its
  helpers.

* po/POTFILES.in:
  Add virsh-volume.c

* cfg.mk:
  Skip to check config.h including for virsh-volume.c
2012-07-26 11:57:42 +08:00
Osier Yang
73b89ed838 virsh: Split cmds of domain group from virsh.c
This splits commands to manage domain into virsh-domain.c,The helpers
not for common use are moved into them too. Standard copyright is added
for the new file.

* tools/virsh.c:
  - Remove commands for domain group, and one helper
    (vshDomainVcpuStateToString)
  - vshStreamSink is moved before commands's definition for it's
    also used by commands not of domain group, such as volUpload.

* tools/virsh-domain.c:
  - New file, commands for domain group and the one helper are
    moved into it.

* po/POTFILES.in:
  - Add virsh-domain.c

* cfg.mk:
  - Skip to check config.h including for virsh-domain.c
2012-07-26 11:57:18 +08:00
Osier Yang
9f4baa222e virsh: Split cmds for domain monitoring from virsh.c
This splits commands commands to monitor domain status into
virsh-domain-monitor.c. The helpers not for common use are moved too.
Standard copyright is added.

* tools/virsh.c:
  - Remove commands for domain monitoring group and a few helpers (
    vshDomainIOErrorToString, vshGetDomainDescription,
    vshDomainControlStateToString, vshDomainStateToString) not for
    common use.
  - Remove (incldue "intprops.h").

* tools/virsh-domain-monitor.c:
  - New file, filled with commands of domain monitor group.
  - Add "intprops.h".

* cfg.mk:
  - Skip strcase checking for virsh-domain-monitor.c
  - Skip to check config.h including for virsh-domain-monitor.c

* po/POTFILES.in
  - Add virsh-domain-monitor.c
2012-07-26 11:56:36 +08:00
Osier Yang
e92ff10b36 virsh: Move definition of cmds and cmd groups right at the top of main
This will avoid many conflicts if moving the codes for each command
group into separate files in later patches.
2012-07-26 11:04:44 +08:00
Martin Kletzander
8101d43433 virsh: fixed domdisplay command
The 'domdisplay' command didn't properly evaluate '--include-password'
option.
2012-07-24 16:58:20 +02:00
Guido Günther
0429e5f0c8 virsh: Add domhostname
to query the guest's hostname.
2012-07-20 21:54:35 +02:00
Sebastian Wiedenroth
29bc4fe646 Add a sheepdog backend for the storage driver
This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.

A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.

A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.

In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.

  <disk type='network'>
    ...
    <source protocol="sheepdog" name="vdi_name">
      <host name="localhost" port="7000"/>
    </source>
  </disk>

To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.

Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
2012-07-18 20:08:27 +01:00
Stefan Berger
387117ad92 Convert 'raw MAC address' usages to use virMacAddr
Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer

then replace raw MAC addresses by replacing

- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr

and introduce usage of above functions where necessary.
2012-07-17 08:07:59 -04:00
Viktor Mihajlovski
ece765959a virsh: remove unnecessary sleep for nodecpustats --percent
Fix for a minor issue:
the sleep(1) statement was called twice,
effectively doubling the elapsed time
execution "virsh nodecpustats --percent".

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2012-07-13 11:32:07 +02:00
Guido Günther
0f9ad736cb virsh: remove extra space between function name and opening brace
to match our CodingStyle.
2012-07-11 20:50:14 +02:00
Osier Yang
ea9509b9e8 virsh: Ensure the parents of the readline history path exists
Instead of changing the existed virFileMakePath to accept mode
argument and modifying a pile of its uses, this patch introduces
virFileMakePathWithMode, and use it instead of mkdir() to create
the readline history dir.
2012-07-10 21:37:13 +08:00
Peter Krempa
e16d434da7 virsh: Clarify documentation for virsh dompmsuspend command
Clarify the docs to make more clear what this command does and that it
requires a guest agent running in the guest.
2012-07-09 19:38:22 +02:00
Peter Krempa
3cdb3b4e64 virsh: Fix ordering of arguments when calling vshCalloc.
In vshSnapshotListCollect() vshCalloc was called with swapped nmemb and
size argument. This caused division by zero in xalloc_oversized as the
macro doesn't expect size to be zero.
2012-07-04 14:01:37 +02:00
Doug Goldstein
9faaaba432 virsh: Cleanup virsh -V output
Fixed up virsh -V output by removing invalid WITH_PROXY & WITH_ONE
checks, adding several missing checks, and fixing the DTrace check.

Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2012-06-29 15:40:22 -06:00
Doug Goldstein
421a200987 virsh: Add domdisplay cmd for VNC, SPICE and RDP
v2:
- Refactored to use virBuffer
- Refactored to use virXPath wrappers
- Added support for tls-port and password for SPICE
- Added optional flag to disable SPICE password to the URI
- Added support for RDP
- Fixed code reviews

Add a new 'domdisplay' command that provides a URI for VNC, SPICE and
RDP connections. Presently the 'vncdisplay' command provides you with
the port info that QEMU is listening on but there is no counterpart for
SPICE and RDP. Additionally this provides you with the bind address as
specified in the XML, which the existing 'vncdisplay' lacks. For SPICE
connections it supports secure and unsecure channels and optionally
providing the password for the SPICE channel.

Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
2012-06-27 16:17:00 +02:00
Michal Privoznik
8d27005b50 storage: Introduce --inactive for pool-dumpxml
Storage is one of the last domains in libvirt where we don't fully
utilize inactive and live XML. Okay, it might be because we don't
have support for that. So implement such support. However, we need
to fallback when talking to old daemon which doesn't support this
new flag called VIR_STORAGE_XML_INACTIVE.
2012-06-25 13:23:28 +02:00
Daniel P. Berrange
3b9ca94025 Fix unused parameters / functions in virsh on Win32
The vshPrintRaw function is not used on Win32, and neither
is the 'msg' parameter of vshAskReedit. Change the nesting
of #ifdef WIN32 conditionals to address this

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-06-25 10:41:10 +01:00
Doug Goldstein
dcbfd57214 virsh: Use virXPath wrappers for vncdisplay cmd
Update the vncdisplay command to use the virXPath wrappers as well as
check if the domain is up rather than using the port set to -1 to mean
the domain is not up.

Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
2012-06-25 11:25:50 +02:00
Peter Krempa
de924ca90a virsh: Improve error when trying to change vm's cpu count 0
This patch adds a check for the count of processors the user requests
for the guest machine so that invalid values produce a more helpful
error message.
2012-06-22 10:24:17 +02:00
Peter Krempa
d62e51f86b virsh: add support for virConnectListAllDomains and clean up cmdList
This patch makes use of the newly added api virConnectListAllDomains()
to list domains in virsh.

Virsh now represents lists of domains using an internal structure
vshDomainList. This structure contains the virDomainPtr list as provided
by virConnectListAllDomains() and the count of domains in the list.

For backwards compatibility, the function vshDomainListCollect was added
that tries to enumerate the domains using the new API and if the API is
not supported falls back to the older approach with the two list
functions.  The helper function also simulates filtering by all
currently supported flags added with virConnectListAllDomains().

This patch also cleans up the "list" command handler to use the new
helpers and adds new command line flags to make use of filtering.
2012-06-21 16:07:06 +02:00
Peter Krempa
f1b872b25a virsh: Rename namesorter to vshNameSorter and clean up indentation 2012-06-21 15:30:58 +02:00
Eric Blake
a7f7bf02fd list: use the new snapshot API in virsh when possible
Using the new API is so much shorter than the rest of the remainder
of the function.

* tools/virsh.c (vshSnapshotList): Use the new API.
2012-06-19 13:50:03 -06:00
Eric Blake
35ae18f3c6 snapshot: expose new flags in virsh
Previously, to get the name of all snapshots with children, it was
necessary to get the name of all snapshots and then remove the
name of leaf snapshots.  This is racy, and somewhat inefficient
compared to planned API additions.  We can emulate --no-metadata on
0.9.5-0.9.12, but for now, there is no emulation of --no-leaves.

* tools/virsh.c (cmdSnapshotList): Add new options --no-leaves and
--no-metadata.
(vshSnapshotList): Emulate where possible.
* tools/virsh.pod (snapshot-list): Document them.
2012-06-19 13:50:03 -06:00
Martin Kletzander
3dc733bb01 virsh: fix few typos on desc command
virsh help fix:
 - <--title> can also /get/ the title

virsh man page:
 - missing <domain-id>
 - <new_desc> should be <new-desc>
2012-06-19 18:20:44 +02:00
Martin Kletzander
4b2273074c virsh: make domiftune interface help string consistent
Append '(MAC Address)' after the help string of domiftune virsh
command as it takes the same type of argument as domif-{get,set}link
which have it specified.
2012-06-19 14:42:19 +02:00
Michal Privoznik
2872155bfe virsh: Update vol-create-as manpage
as we support qed format as well.
2012-06-18 14:40:32 +02:00
Eric Blake
90a61b3940 snapshot: use new virsh function for snapshot-list
Operating on a list of snapshot objects looks so much simpler.
In particular, since the helper function already trimmed out
irrelevant entries, we no longer have quite so many special cases
on finding the first snapshot to operate on.  Also, vshTreePrint
no longer has a generic callback struct; both clients now pass
something different according to their own needs.

* tools/virsh.c (cmdSnapshotList): Use previous patches.
(vshTreeArrayLookup): Rename...
(vshNodeListLookup): ...now that it only has one client.
(cmdNodeListDevices): Adjust caller.
2012-06-15 19:49:05 -06:00
Eric Blake
76d397b0d3 snapshot: new virsh function factored from snapshot-list
This patch is based on the fallback code out of cmdSnapshotList,
with tweaks to keep the snapshot objects around rather than just
their name, and to remove unwanted elements before returning.
It looks forward to a future patch when we add a way to list all
snapshot objects at once, and the next patch will simplify
cmdSnapshotList to take advantage of this factorization.

* tools/virsh.c (vshSnapshotList, vshSnapshotListFree): New functions.
2012-06-15 19:49:05 -06:00
Wen Congyang
440b8ad181 virsh: allow the user to specify vmcore's format
Add a new parameter --memory-only for 'virsh dump' command. So
the user can decide the vmcore's format.
2012-06-15 20:36:14 +08:00
Osier Yang
e3843d7f04 virsh: Null terminated the string memcpy from buffer explicitly
Detected by valgrind:

==16217== 1 errors in context 1 of 12:
==16217== Invalid read of size 1
==16217==    at 0x4A07804: __GI_strlen (mc_replace_strmem.c:284)
==16217==    by 0x3019F167F6: xdr_string (in /lib64/libc-2.12.so)
==16217==    by 0x3033709E8D: xdr_remote_nonnull_string (remote_protocol.c:31)
==16217==    by 0x303370E5CB: xdr_remote_domain_update_device_flags_args (remote_protocol.c:2028)
==16217==    by 0x30337197D1: virNetMessageEncodePayload (virnetmessage.c:341)
==16217==    by 0x30337135E1: virNetClientProgramCall (virnetclientprogram.c:327)
==16217==    by 0x30336F1EFD: callWithFD (remote_driver.c:4586)
==16217==    by 0x30336F1F7B: call (remote_driver.c:4607)
==16217==    by 0x30336F42F2: remoteDomainUpdateDeviceFlags (remote_client_bodies.h:2865)
==16217==    by 0x30336D46E5: virDomainUpdateDeviceFlags (libvirt.c:9457)
==16217==    by 0x41AEE8: cmdChangeMedia (virsh.c:15249)
==16217==    by 0x413CB4: vshCommandRun (virsh.c:18669)
==16217==  Address 0x4ec5e25 is 0 bytes after a block of size 293 alloc'd
==16217==    at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==16217==    by 0x303364F1DB: virAllocN (memory.c:129)
==16217==    by 0x41A844: vshPrepareDiskXML (virsh.c:15043)
==16217==    by 0x41AECC: cmdChangeMedia (virsh.c:15246)
==16217==    by 0x413CB4: vshCommandRun (virsh.c:18669)
==16217==    by 0x423973: main (virsh.c:20261)
2012-06-15 10:17:30 +08:00
Michal Privoznik
79521a5e5b virsh: Report name from edited object
There is a little easter egg in virsh: one can easily clone
an object (domain, network, ...). Just 'virsh edit' change the name
and remove <uuid>. And then, in the end when reporting success
the new name was printed out.
However, with recent edit rewrite we lost the final part and are
still printing the original name out.
2012-06-14 15:04:28 +02:00
Michal Privoznik
b00469b615 virsh: Honor reedit opts printing to a function
When printing reedit options we make stdin raw. However,
this results in stdout being raw as well. Therefore we need
to return carriage when doing new line. Unfortunately,
'\r' cannot be part of internationalized messages hence
we must move them to formatting string which then in turn
become huge and disarranged. To solve this, a new function
is introduced which takes variable string arguments and
prepend each with "\r\n" just before printing.
2012-06-14 15:04:28 +02:00
Peter Krempa
5b4740265c virsh: Don't generate invalid XML in attach-disk command
The attach-disk command used with parameter --cache created an invalid
XML snippet as the beginning of the <driver> element was not printed
when used solely with --cache and no other attribute to driver.
2012-06-14 10:07:54 +02:00
Laine Stump
1f145b2f0f network: fully support/use VIR_NETWORK_XML_INACTIVE flag
commit 52d064f42d added
VIR_NETWORK_XML_INACTIVE in order to allow suppressing the
auto-generated list of VFs in network definitions, and a --inactive
flag to virsh net-dumpxml to take advantage of the flag. However, it
missed out on two opportunities:

1) Use INACTIVE to get the current config of the network as it
   exists on disk, rather than the currently active config.

2) Add INACTIVE to the flags used for the virsh net-edit command, so
   that it won't include the forward-pool interfaces that were
   autogenerated, and so that a re-edit of the network prior to
   restarting it will show any other edits made since the last restart
   of the network. (prior to this patch, if you edited a network a 2nd
   time without restarting, all of the previous edits would magically
   disappear).

In order to fit with the new #define-based generic edit function in
virsh.c, a new function vshNetworkGetXMLDesc() was added. This
function first tries to call virNetworkGetXMLDesc with the INACTIVE
flag added, then retries without if the first attempt fails (in the
manner expected when the server doesn't support it).
2012-06-13 14:53:35 -04:00
Eric Blake
78d078c824 build: silence gettext warning
Otherwise, 'make dist' gives multiple warnings like:

libvirt.pot:20814: warning: internationalized messages should not contain the `\r' escape sequence

* tools/virsh.c (vshAskReedit): Avoid \r in _().
2012-06-12 21:46:36 -06:00
Eric Blake
757c47635d snapshot: add 'virsh snapshot-info'
Expose the recent API additions in virsh.  Borrows ideas from 'dominfo'
for the general type of information to display.

Output looks like:

$ tools/virsh snapshot-info fedora-local tmp
Name:           tmp
Domain:         fedora-local
Current:        no
State:          disk-snapshot
Parent:         -
Children:       1
Descendants:    2
Metadata:       yes

possibly with fewer lines when talking to older servers.

* tools/virsh.c (cmdSnapshotInfo): New command.
* tools/virsh.pod (snapshot-info): Document it.
2012-06-11 11:55:00 -06:00
Eric Blake
903560245f snapshot: virsh indentation cleanup
No semantic change; this will make it easier to refactor code.

* tools/virsh.c (cmdSnapshotList): Drop level of indentation, and
rename a variable.
2012-06-11 09:23:16 -06:00
Eric Blake
c8564ad476 virsh: make tree listing more flexible
Requiring the user to pass in parallel arrays of names and parents
is annoying; it means that you can't qsort one of the arrays without
invalidating the ordering of the other.  By refactoring this function
to use callbacks, we isolate the layout to be independent of the
printing, and a future patch can exploit that to improve layout.

* tools/virsh.c (vshTreePrintInternal): Use callbacks rather than
requiring a char** array.
(vshTreeArrayLookup): New helper function.
(vshTreePrint, cmdNodeListDevices, cmdSnapshotList): Update callers.
2012-06-11 09:23:16 -06:00
Eric Blake
ef981053ca virsh: remove limits on tree listing
I am not a fan of fixed-width buffers.  All it takes is a
linear chain of more than 100 snapshots to mess up 'virsh
snapshot-list --tree'.  Now that virBuffer is more powerful,
we might as well exploit its power.

* tools/virsh.c (cmdNodeListDevicesPrint): Simplify to use a
virBuffer instead of fixed-width prefix, factor guts, and rename...
(vshTreePrint, vshTreePrintInternal): ...along with new helper.
(cmdNodeListDevices, cmdSnapshotList): Update callers.
2012-06-11 09:23:16 -06:00