When failing on starting a domain, it tries to reattach all the PCI
devices defined in the domain conf, regardless of whether the devices
are still used by other domain. This will cause the devices to be deleted
from the list qemu_driver->activePciHostdevs, thus the devices will be
thought as usable even if it's not true. And following commands
nodedev-{reattach,reset} will be successful.
How to reproduce:
1) Define two domains with same PCI device defined in the confs.
2) # virsh start domain1
3) # virsh start domain2
4) # virsh nodedev-reattach $pci_device
You will see the device will be reattached to host successfully.
As pciDeviceReattach just check if the device is still used by
other domain via checking if the device is in list driver->activePciHostdevs,
however, the device is deleted from the list by step 2).
This patch is to prohibit the bug by:
1) Prohibit a domain starting or device attachment right at
preparation period (qemuPrepareHostdevPCIDevices) if the
device is in list driver->activePciHostdevs, which means
it's used by other domain.
2) Introduces a new field for struct _pciDevice, (const char *used_by),
it will be set as the domain name at preparation period,
(qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting
the device from driver->activePciHostdevs if it's still used by
other domain when stopping the domain process.
* src/pci.h (define two internal functions, pciDeviceSetUsedBy and
pciDevceGetUsedBy)
* src/pci.c (new field "const char *used_by" for struct _pciDevice,
implementations for the two new functions)
* src/libvirt_private.syms (Add the two new internal functions)
* src/qemu_hostdev.h (Modify the definition of functions
qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices)
* src/qemu_hostdev.c (Prohibit preparation and don't delete the
device from activePciHostdevs list if it's still used by other domain)
* src/qemu_hotplug.c (Update function usage, as the definitions are
changed)
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch adds the following helper functions:
pciDeviceIsVirtualFunction: Function to check if a pci device is a sriov VF
pciGetVirtualFunctionIndex: Function to get the VF index of a sriov VF
pciDeviceNetName: Function to get the network device name of a pci device
pciConfigAddressCompare: Function to compare pci config addresses
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
This patch moves some of the sriov related pci code from node_device driver
to src/util/pci.[ch]. Some functions had to go thru name and argument list
change to accommodate the move.
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
add a new API pciDeviceReAttachInit() in pci.c to initialize state values for nodedev reattach
Initialize three state value of device driver to 1. This is just for a new call to
qemudNodeDeviceReAttach()
Detected by Coverity. Some, but not all, error paths were clean;
but they were repetitive so I refactored them.
* src/util/pci.c (pciGetDevice): Plug leak.
Seems reasonable to have all command wrappers in the same place
v2:
Dont move SetInherit
v3:
Comment spelling fix
Adjust WARN0 comment
Remove spurious #include movement
Don't include sys/types.h
Combine virExec enums
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Substitute VIR_ERR_NO_SUPPORT with VIR_ERR_INTERNAL_ERROR. Error
like following is not what user want to see.
error : pciDeviceIsAssignable:1487 : this function is not supported
by the connection driver: Device 0000:07:10.0 is behind a switch
lacking ACS and cannot be assigned
These VIR_XXXX0 APIs make us confused, use the non-0-suffix APIs instead.
How do these coversions works? The magic is using the gcc extension of ##.
When __VA_ARGS__ is empty, "##" will swallow the "," in "fmt," to
avoid compile error.
example: origin after CPP
high_level_api("%d", a_int) low_level_api("%d", a_int)
high_level_api("a string") low_level_api("a string")
About 400 conversions.
8 special conversions:
VIR_XXXX0("") -> VIR_XXXX("msg") (avoid empty format) 2 conversions
VIR_XXXX0(string_literal_with_%) -> VIR_XXXX(%->%%) 0 conversions
VIR_XXXX0(non_string_literal) -> VIR_XXXX("%s", non_string_literal)
(for security) 6 conversions
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Clang detected a null-pointer dereference regression, introduced
in commit 4e8969eb. Without this patch, a device with
unbind_from_stub set to false would eventually try to call
virFileExists on uncomputed drvdir.
* src/util/pci.c (pciUnbindDeviceFromStub): Ensure drvdir is set
before use.
We should bind pci device to original driver when pciBindDeviceToStub() failed.
If the pci device is not bound to any driver before calling pciBindDeviceToStub(),
we should only unbind it from pci-stub. If it is bound to pci-stub, we should not
unbind it from pci-stub.
This patch do the following things:
1. rename the function as 'Unbind' is better than 'UnBind'.
2. pciUnbindDeviceFromStub() will be used in the function pciBindDeviceToStub() in
next patch. Float it up, instead of having to have a forward declaration
I'm proposing we make use of $PCIDIR/reset in qemu-kvm to reset
devices on VM reset. We need to add it to libvirt's list of
files that get ownership for device assignment.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch adds a mode_t parameter to virFileWriteStr().
If mode is different from 0, virFileWriteStr() will try
to create the file if it doesn't exist.
* src/util/util.h (virFileWriteStr): Alter signature.
* src/util/util.c (virFileWriteStr): Allow file creation.
* src/network/bridge_driver.c (networkEnableIpForwarding)
(networkDisableIPV6): Adjust clients.
* src/node_device/node_device_driver.c
(nodeDeviceVportCreateDelete): Likewise.
* src/util/cgroup.c (virCgroupSetValueStr): Likewise.
* src/util/pci.c (pciBindDeviceToStub, pciUnBindDeviceFromStub):
Likewise.
Using automated replacement with sed and editing I have now replaced all
occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of
course. Some replacements were straight forward, others I needed to pay
attention. I hope I payed attention in all the right places... Please
have a look. This should have at least solved one more double-close
error.
pciFindStubDriver currently returns 0 in one of the error cases.
While it's correct...NULL is more readable.
Signed-off-by: Chris Wright <chrisw@redhat.com>
When trying to assign a PCI device to a guest, we have
to check that all bridges upstream of that device support
ACS. That means that we have to find the parent bridge of
the current device, check for ACS, then find the parent bridge
of that device, check for ACS, etc. As it currently stands,
the code to do this iterates through all PCI devices on the
system, looking for a device that has a range of busses that
included the current device's bus.
That check is not restrictive enough, though. Depending on
how we iterated through the list of PCI devices, we could first
find the *topmost* bridge in the system; since it necessarily had
a range of busses including the current device's bus, we
would only ever check the topmost bridge, and not check
any of the intermediate bridges.
Note that this also caused a fairly serious bug in the
secondary bus reset code, where we could erroneously
find and reset the topmost bus instead of the inner bus.
This patch changes pciGetParentDevice() so that it first
checks if a bridge device's secondary bus exactly matches
the bus of the device we are looking for. If it does, we've
found the correct parent bridge and we are done. If it does not,
then we check to see if this bridge device's busses *include* the
bus of the device we care about. If so, we mark this bridge device
as best, and go on. If we later find another bridge device whose
busses include this device, but is more restrictive, then we
free up the previous best and mark the new one as best. This
algorithm ensures that in the normal case we find the direct
parent, but in the case that the parent bridge secondary bus
is not exactly the same as the device, we still find the
correct bridge.
This patch was tested by me on a 4-port NIC with a
bridge without ACS (where assignment failed), a 4-port
NIC with a bridge with ACS (where assignment succeeded),
and a 2-port NIC with no bridges (where assignment
succeeded).
Signed-off-by: Chris Lalancette <clalance@redhat.com>
If detecting the FLR flag of a pci device fails, then we
could run into the situation of trying to close a file
descriptor twice, once in pciInitDevice() and once in pciFreeDevice().
Fix that by removing the pciCloseConfig() in pciInitDevice() and
just letting pciFreeDevice() handle it.
Thanks to Chris Wright for pointing out this problem.
While we are at it, fix an error check. While it would actually
work as-is (since success returns 0), it's still more clear to
check for < 0 (as the rest of the code does).
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Some buggy PCI devices actually support FLR, but
forget to advertise that fact in their PCI config space.
However, Virtual Functions on SR-IOV devices are
*required* to support FLR by the spec, so force has_flr
on if this is a virtual function.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When doing a PCI secondary bus reset, we must be sure that there are no
active devices on the same bus segment. The active device tracking is
designed to only track host devices that are active in use by guests.
This ignores host devices that are actively in use by the host. So the
current logic will reset host devices.
Switch this logic around and allow sbus reset when we are assigning all
devices behind a bridge to the same guest at guest startup or as a result
of a single attach-device command.
* src/util/pci.h: change signature of pciResetDevice to add an
inactive devices list
* src/qemu/qemu_driver.c src/xen/xen_driver.c: use (or not) the new
functionality of pciResetDevice() depending on the place of use
* src/util/pci.c: implement the interface and logic changes
The first conditional is always true which means the iterator will
never find another device on the same bus.
if (dev->domain != check->domain ||
dev->bus != check->bus ||
----> (check->slot == check->slot &&
check->function == check->function)) <-----
The goal of that check is to verify that the device is either:
in a different pci domain
on a different bus
is the same identical device
This means libvirt may issue a secondary bus reset when there are
devices
on that bus that actively in use by the host or another guest.
* src/util/pci.c: fix a bogus test in pciSharesBusWithActive()
In the current libvirt PCI code, there is no checking whether
a PCI device is in use by a guest when doing node device
detach or reattach. This causes problems when a device is
assigned to a guest, and the administrator starts issuing
nodedevice commands. Make it so that we check the list
of active devices when trying to detach/reattach, and only
allow the operation if the device is not assigned to a guest.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Approximately 60 messages were marked. Since these diagnostics are
intended solely for developers and maintainers, encouraging translation
is deemed to be counterproductive:
http://thread.gmane.org/gmane.comp.emulators.libvirt/25050/focus=25052
Run this command:
git grep -l VIR_WARN|xargs perl -pi -e \
's/(VIR_WARN0?)\s*\(_\((".*?")\)/$1($2/'
This also fixes a problem with MinGW's GCC on Windows. GCC complains
about the L modifier being unknown.
Parsing in pciIterDevices is stricter now and doesn't accept trailing
characters after the actual <domain>:<bus>:<slot>.<function> sequence
anymore.
Parsing in pciWaitForDeviceCleanup is also stricter now and expects
the <start>-<end> : <domain>:<bus>:<slot>.<function> sequence to be
terminated by \n.
Change domain from unsigned long long to unsigned int in
pciWaitForDeviceCleanup, because everywhere else domain is handled as
unsigned int too.
All callers now pass a NULL virConnectPtr into the USB/PCi device
iterator functions. Therefore the virConnectPtr arg can now be
removed from these functions
* src/util/hostusb.h, src/util/hostusb.c: Remove virConnectPtr
from usbDeviceFileIterate
* src/util/pci.c, src/util/pci.h: Remove virConnectPtr arg from
pciDeviceFileIterate
* src/qemu/qemu_security_dac.c, src/security/security_selinux.c: Update
to drop redundant virConnectPtr arg
Certain hypervisors (like qemu/kvm) map the PCI bar(s) on
the host when doing device passthrough. This can lead to a race
condition where the hypervisor is still cleaning up the device while
libvirt is trying to re-attach it to the host device driver. To avoid
this situation, we look through /proc/iomem, and if the hypervisor is
still holding onto the bar (denoted by the string in the matcher variable),
then we can wait around a bit for that to clear up.
v2: Thanks to review by DV, make sure we wait the full timeout per-device
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The patches to add ACS checking to PCI device passthrough
introduced a bug. With the current code, if you try to
passthrough a device on the root bus (i.e. bus 0), then
it denies the passthrough. This is because the code in
pciDeviceIsBehindSwitchLackingACS() to check for a parent
device doesn't take into account the possibility of the
root bus. If we are on the root bus, it means we
legitimately can't find a parent, and it also means that
we don't have to worry about whether ACS is enabled.
Therefore return 0 (indicating we don't lack ACS) from
pciDeviceIsBehindSwitchLackingACS().
Signed-off-by: Chris Lalancette <clalance@redhat.com>
I noticed some debug messages are printed with an empty lines after
them. This patch removes these empty lines from all invocations of the
following macros:
VIR_DEBUG
VIR_DEBUG0
VIR_ERROR
VIR_ERROR0
VIR_INFO
VIR_WARN
VIR_WARN0
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
New pciDeviceIsAssignable() function for checking whether a given PCI
device can be assigned to a guest was added. Currently it only checks
for ACS being enabled on all PCIe switches between root and the PCI
device. In the future, it could be the right place to check whether a
device is unbound or bound to a stub driver.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
* src/util/pci.c, src/util/pci.h: Make the pciDeviceList struct
opaque to callers of the API. Add accessor methods for managing
devices in the list
* src/qemu/qemu_driver.c: Update to use APIs instead of directly
accessing pciDeviceList fields
