Node names for block objects in qemu need to be unique for an instance
of the qemu process. Add a counter to generate objects sequentially and
store it in the status XML so that we can restore it.
The helpers added allow to create new node names and reset the counter
after the VM process terminates.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a user configures the backing chain in the XML we should not ignore
it. We already do parse it but don't format it out. As a
safety-precaution don't attempt to format detected chain into the
inactive XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We'll specify them ourselves so it's pointless to attempt to redetect
them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to load the backing chain from the XML when using -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
SD cards are currently passed by using -drive only which would not be
compatible with using -blockdev fully.
Clear QEMU_CAPS_BLOCKDEV if the VM has such devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability currently is not enabled so that we can add individual
bits first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It should be impossible to lack an alias in the domain definition. Other
disk types don't generate it so remove it here as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'device' field reported by 'query-block' is empty when -blockdev is
used. Add an argument which will allow matching disk by using the qdev
id so we can use this code with -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'device' argument matches only the legacy drive alias. For blockdev
we need to set the throttling for a QOM id and thus we'll need to use
the 'id' field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The wrapper executes the command and does error detection so there's no
need to open-code all of those things.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the preparation steps from qemuDomainAttachDiskGeneric up into
qemuDomainAttachDeviceDiskLive so that also media changing can use the
prepared file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuDomainAttachDeviceDiskLive to change the media in
qemuDomainChangeDiskLive as the former function already does all the
necessary steps to prepare the new medium.
This also allows us to turn qemuDomainChangeEjectableMedia static.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Turns out that 'query-nodes' is not what we want and the
'query-blockstats' command was in fact buggy. Revert the new field since
it's not needed.
This reverts commit 50edca1331298bfcb2622e8fe588d493aff9ab68.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't use it for anything useful so it does not make much sense to
extract it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU supports 'block_resize' since 0.14 so we don't need to do explicit
checking. Additionally the caller did not use the different value at
all.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the pointless "empty path" check and use a better error message
if the disk was not found.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently we'd report the alias of the drive which is backing the cdrom
rather than the device itself:
$ virsh event ds tray-change --loop
event 'tray-change' for domain ds disk drive-ide0-0-1: opened
event 'tray-change' for domain ds disk drive-ide0-0-1: closed
Report the disk device alias as we document in the API docs:
https://libvirt.org/html/libvirt-libvirt-domain.html#virConnectDomainEventTrayChangeCallback
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1610072
Due to historical reasons we were not parsing device info on
guestfwd channel. Sure, it doesn't make much sense to parse
<address/> but it surely makes sense to parse its alias (which
might be an user alias).
This reverts commit 47a3dd46ead20e6fdc30bcdc1b8e707e250d33da
which fixed https://bugzilla.redhat.com/show_bug.cgi?id=1172526.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Since we're not saving the platform-specific data into a cache, we're
not going to populate the structure, which in turn will cause a crash
upon calling virNodeGetSEVInfo because of a NULL pointer dereference.
Ultimately, we should start caching this data along with host-specific
capabilities like NUMA and SELinux stuff into a separate cache, but for
the time being, this is a semi-proper fix for a potential crash.
Backtrace (requires libvirtd restart to load qemu caps from cache):
#0 qemuGetSEVInfoToParams
#1 qemuNodeGetSEVInfo
#2 virNodeGetSEVInfo
#3 remoteDispatchNodeGetSevInfo
#4 remoteDispatchNodeGetSevInfoHelper
#5 virNetServerProgramDispatchCall
#6 virNetServerProgramDispatch
#7 virNetServerProcessMsg
#8 virNetServerHandleJob
#9 virThreadPoolWorker
#10 virThreadHelper
https: //bugzilla.redhat.com/show_bug.cgi?id=1612009
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
So the procedure to detect SEV support works like this:
1) we detect that sev-guest is among the QOM types and set the cap flag
2) we probe the monitor for SEV support
- this is tricky, because QEMU with compiled SEV support will always
report -object sev-guest and query-sev-capabilities command, that
however doesn't mean SEV is supported
3) depending on what the monitor returned, we either keep or clear the
capability flag for SEV
Commit a349c6c21c6 added an explicit check for "GenericError" in the
monitor reply to prevent libvirtd to spam logs about missing
'query-sev-capabilities' command. At the same time though, it returned
success in this case which means that we didn't clear the capability
flag afterwards and happily formatted SEV into qemuCaps. Therefore,
adjust all the relevant callers to handle -1 on errors, 0 on SEV being
unsupported and 1 on SEV being supported.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Keep with the recent effort of replacing as many explicit *Free
functions with their automatic equivalents.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
commit 5c81c342a7 forgot to skip the detaching of the shmem backend
when async unplug is requested which meant that we've tried to unplug
the backend prior to delivery of the DEVICE_DELETED event.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1618622
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Qemu-3.0 supports Hyper-V-style PV TLB flush, Windows guests can benefit
from this feature as KVM knows which vCPUs are not currently scheduled (and
thus don't require any immediate action).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Qemu-3.0 supports so-called 'Reenlightenment' notifications and this (in
conjunction with 'hv-frequencies') can be used make Hyper-V on KVM pass
stable TSC page clocksource to L2 guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Qemu-2.12 gained 'hv-frequencies' cpu flag to enable Hyper-V frequency
MSRs. These MSRs are required (but not sufficient) to make Hyper-V on
KVM pass stable TSC page clocksource to L2 guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
There are some path where the buffer is not passed to
virCommandAddArgBuffer and therefore the buffer might leak.
==191201== 1,010 bytes in 1 blocks are definitely lost in loss record 826 of 836
==191201== at 0x4C2CE3F: malloc (vg_replace_malloc.c:298)
==191201== by 0x4C2F1BF: realloc (vg_replace_malloc.c:785)
==191201== by 0x5D39E82: virReallocN (viralloc.c:245)
==191201== by 0x5D3E8F2: virBufferGrow (virbuffer.c:150)
==191201== by 0x5D3E9C8: virBufferAdd (virbuffer.c:185)
==191201== by 0x56EAC98: qemuBuildFloppyCommandLineControllerOptions (qemu_command.c:2162)
==191201== by 0x56EB3E1: qemuBuildDisksCommandLine (qemu_command.c:2370)
==191201== by 0x570055E: qemuBuildCommandLine (qemu_command.c:10315)
==191201== by 0x575EA7F: qemuProcessCreatePretendCmd (qemu_process.c:6777)
==191201== by 0x113DAB: testCompareXMLToArgv (qemuxml2argvtest.c:598)
==191201== by 0x13A75B: virTestRun (testutils.c:180)
==191201== by 0x138BE8: mymain (qemuxml2argvtest.c:2975)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that the virAuthGet*Path API's generate all the error messages
we can remove them from the callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Now that the virAuthGet*Path API's generate all the error messages
we can remove them from the callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Now that the virAuthGet*Path API's generate all the error messages
we can remove them from the callers. This means that we will no
longer overwrite the error from the API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Now that the virAuthGet*Path API's generate all the error messages
we can remove them from the callers. This means that we will no
longer overwrite the error from the API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Now that the virAuthGet*Path API's generate all the error messages
we can remove them from the callers. This means that we will no
longer overwrite the error from the API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Now that the virAuthGet*Path API's generate all the error messages
we can remove them from the callers. This means that we will no
longer overwrite the error from the API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Rather than forcing the caller to generate an error, let's
generate the Username or Password error message failure if
the auth->cb fails. This is the last error path that needs
a specific message for various callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
If we never find the valid credtype in the list, then we'd return
NULL without an error signaled forcing the caller to generate one
that will probably be incorrect. Let's be specific.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Now that the virAuthGet*Path helpers make the checks, we can remove
them from here.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Before trying to call @auth->cb, let's ensure it exists.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Before trying to dereference @auth, let's ensure it's valid.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
The virSecretGetSecretString() helper looks up a secret for given
pool and returns its value in @secret_value and its length in
@secret_value_size. However, the trailing '\0' is not included in
either of the variables. This is because usually the value of the
secret is passed to some encoder (usually base64 encoder) where
the trailing zero must not be accounted for.
However, in two places we actually want the string as we don't
process it any further.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Semantically, there is no difference between an uninitialized worker
pool and an initialized worker pool with zero workers. Let's allow the
worker pool to be initialized for max_workers=0 as well then which
makes the API more symmetric and simplifies code. Validity of the
worker pool is delegated to virThreadPoolGetMaxWorkers instead.
This patch fixes segmentation faults in
virNetServerGetThreadPoolParameters and
virNetServerSetThreadPoolParameters for the case when no worker pool
is actually initialized (max_workers=0).
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Since they are done inside virAuthGetPassword and virAuthGetUsername
when needed. Also, only auth is checked, but auth->cb, which that could
lead to a crash if the callback is NULL.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Instead of adding the same check for every drivers, execute the checks
in virAuthGetUsername and virAuthGetPassword. These funtions are called
when user is not set in the URI.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Currently iohelper's error log is recorded in virFileWrapperFdClose.
However, if something goes wrong the caller might not even get to
calling virFileWrapperFdClose and call virFileWrapperFdFree
directly. Therefore the error reporting should happen there.
Signed-off-by: xinhua.Cao <caoxinhua@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While in most cases the values are going to be much
smaller than our arbitrary 4096 limit, there is really
no guarantee that would be the case: in fact, a few
aarch64 servers have been spotted in the wild with
core_id as high as 6216.
Take advantage of virBitmap's ability to automatically
alter its size at runtime to accomodate such values.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We already have a function which parses
thread_siblings_list for a CPU and returns the
corresponding bitmap, and a bunch of utility functions
that perform operations on bitmaps such as counting
the number of set bits: use those to implement the
function instead of having an additional ad-hoc parser
for thread_siblings.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
