When converting a domain xml containing a CDROM device without
any attached source, don't add a target=(null) to the libxl config
disk definition: xen doesn't like it at all and would fail to start
the domain.
There was inconsistency between alias used to create tls-creds-x509
object and alias used to link that object to chardev while hotpluging.
Hotplug ends with this error:
error: Failed to detach device from channel-tcp.xml
error: internal error: unable to execute QEMU command 'chardev-add':
No TLS credentials with id 'objcharchannel3_tls0'
In XML we have for example alias "serial0", but on qemu command line we
generate "charserial0".
The issue was that code, that creates QMP command to hotplug chardev
devices uses only the second alias "charserial0" and that alias is also
used to link the tls-creds-x509 object.
This patch unifies the aliases for tls-creds-x509 to be always generated
from "charserial0".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Instead of typing the prefix every time we want to append parameters
to qemu command line use a variable that contains prefixed alias.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We need to make sure that the chardev is TCP. Without this check we
may access different part of union and corrupt pointers.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The code is entirely correct, but it still managed to trip me
up when I first ran into it because I did not realize right away
that VIR_PCI_CONNECT_TYPES_ENDPOINT was not a single flag, but
rather a mask including both VIR_PCI_CONNECT_TYPE_PCI_DEVICE and
VIR_PCI_CONNECT_TYPE_PCIE_DEVICE.
In order to save the next distracted traveler in PCI Address Land
some time, document this fact with a comment. Add a test case for
the behavior as well.
A pci-bridge has *almost* the same rules as a legacy PCI endpoint
device for where it can be automatically connected, and until now both
had been considered identical. There is one pairing that is okay when
specifically requested by the user (i.e. manual assignment), but we
want to avoid it when auto-assigning addresses - plugging a pci-bridge
directly into pcie-root (it is cleaner to plug in a dmi-to-pci-bridge,
then plug the pci-bridge into that).
In order to allow that difference, this patch makes a separate
CONNECT_TYPE for pci-bridge, and uses it to restrict auto-assigned
addresses for pci-bridges to be only on pci-root, pci-expander-bus,
dmi-to-pci-bridge, or on another pci-bridge.
NB: As with other discouraged-but-seem-to-work configurations
(e.g. plugging a legacy PCI device into a pcie-root-port) if someone
*really* wants to, they can still force a pci-bridge to be plugged
into pcie-root (by manually specifying its PCI address.)
https://bugzilla.redhat.com/show_bug.cgi?id=1357416
Rather than return a 0 or -1 and the *result string, return just the result
string to the caller. Alter all the callers to handle the different return.
As a side effect or result of this, it's much clearer that we cannot just
assign the returned string into the scsi_host wwnn, wwpn, and fabric_wwn
fields - rather we should fetch a temporary string, then as long as our
fetch was good, VIR_FREE what may have been there, and STEAL what we just got.
This fixes a memory leak in the virNodeDeviceCreateXML code path through
find_new_device and nodeDeviceLookupSCSIHostByWWN which will continually
call nodeDeviceSysfsGetSCSIHostCaps until the expected wwnn/wwpn is found
in the device object capabilities.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1366108
There are couple of things that needs to be done in order to
allow vhost-user hotplug. Firstly, vhost-user requires a chardev
which is connected to vhost-user bridge and through which qemu
communicates with the bridge (no acutal guest traffic is sent
through there, just some metadata). In order to generate proper
chardev alias, we must assign device alias way sooner.
Then, because we are plugging the chardev first, we need to do
the proper undo if something fails - that is remove netdev too.
We don't want anything to be left over in case attach fails at
some point.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1366505
So far, this function lacked support for
VIR_DOMAIN_NET_TYPE_VHOSTUSER leaving callers to hack around the
problem by constructing the command line on their own. This is
not ideal as it blocks hot plug support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, what we do for vhost-user network is generate the
following part of command line:
-netdev type=vhost-user,id=hostnet0,chardev=charnet0
There's no need for 'type=' it is the default. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's no need to reinvent the wheel here. We already have a
function to format virDomainChrSourceDefPtr. It's called
qemuBuildChrChardevStr(). Use that instead of some dummy
virBufferAsprintf().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This alone makes not much sense. But the aim is to reuse this
function in qemuBuildVhostuserCommandLine() where 'nowait' is not
supported for vhost-user devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We tend to prevent using 'default' in switches. And it is for a
good reason - control may end up in paths we wouldn't want for
new values. In this specific case, if qemuBuildHostNetStr is
called over VIR_DOMAIN_NET_TYPE_VHOSTUSER it would produce
meaningless output. Fortunately, there no such call yet.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of blindly claim support for hot-plugging of every
interface type out there we should copy approach we have for
device types: white listing supported types and explicitly error
out on unsupported ones.
For instance, trying to hotplug vhostuser interface results in
nothing usable from guest currently. vhostuser typed interfaces
require additional work on our side.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have function that does some checking at its
beginning and then have one big switch for all the interface
types it supports.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have function that does some checking of the
arguments at its beginning and then have one big switch for all
the interface types it supports. Each one of them generating the
corresponding part of the command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have function that does some checking of the
arguments at its beginning and then have one big switch for all
the interface types it supports. Each one of them generating the
corresponding part of the command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function for some weird reason returns integer instead of
virDomainNetType type. It is important to return the correct type
so that we know what values we can expect.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Not every system out there has syslog, that's why we check for it
in our configure script. However, in 640b58abdf while fixing
another issue, some variables and functions are called that are
defined only when syslog.h is present. But these function
calls/variables were not guarded by #ifdef-s.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemuBuildSmbiosBiosStr and qemuBuildSmbiosSystemStr return NULL if
there's nothing to format on the commandline. Reporting errors from
buffer creation doesn't make sense since it would be ignored.
This initially started as a fix of some debug printing in
virCgroupDetect. However it turned out that other places suffer
from the similar problem. While dealing with pids, esp. in cases
where we cannot use pid_t for ABI stability reasons, we often
chose an unsigned integer type. This makes no sense as pid_t is
signed.
Also, new syntax-check rule is introduced so we won't repeat this
mistake.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It is stated in the manual already, so let's mention the same thing in
the description to avoid causing problems.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There are two video devices with models without VGA compatibility mode.
They are primary used as secondary video devices, but in some cases it
is required to use them also as primary video devices.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This improves commit 706b5b6277 in a way that we check qemu capabilities
instead of what architecture we are running on to detect whether we can
use *virtio-vga* model or not. This is not a case only for arm/aarch64.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit 21373feb added support for primary virtio-vga device but it was
checking for virtio-gpu. Let's check for existence of virtio-vga if we
want to use it.
Virtio video device is currently represented by three different models
*virtio-gpu-device*, *virtio-gpu-pci* and *virtio-vga*. The first two
models are tied together and if virtio video devices is compiled in they
both exist. However, the *virtio-vga* model doesn't have to exist on
some architectures even if the first two models exist. So we cannot
group all three together.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Before this patch we've checked qemu capabilities for video devices
only while constructing qemu command line using "-device" option.
Since we support qemu only if "-device" option is present we can use
the same capabilities to check also video devices while using "-vga"
option to construct qemu command line.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
All definition validation that doesn't depend on qemu capabilities
and was allowed previously as valid definition should be placed into
qemuDomainDefValidate.
The check whether video type is supported or not was based on an enum
that translates type into model. Use switch to ensure that if new
video type is added, it will be properly handled.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We generally uses QEMU_CAPS_DEVICE_$NAME to probe for existence of some
device and QEMU_CAPS_$NAME_$PROP to probe for existence of some property
of that device.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If QEMU in question supports QMP, this capability is set if
QEMU_CAPS_DEVICE_QXL was set based on existence of "-device qxl". If
libvirt needs to parse *help*, because there is no QMP support, it
checks for existence of "-vga qxl", but it also parses output of
"-device ?" and sets QEMU_CAPS_DEVICE_QXL too.
Now that libvirt supports only QEMU that has "-device" implemented it's
safe to drop this capability and stop using it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
