Use the new accessors in the private XML formatters and parsers and the
recovery code.
Specifically in all instances we use the proper (not effective) storage
nodename. In the virStorageSource private data it is what we need to
store. In blockjobs status XML it simply serves us to find the
appropriate 'virStorageSource' struct so using the storage layer node
name is simpler.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use 'qemuBlockStorageSourceGetEffectiveStorageNodename' in all the JSON
props formatters for setting up a 'blockdev-create' job of a format
layer.
In case of the blockjob name designator we're okay to use just the
storage layer nodename as that serves only to find the appropriate
entry.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The lookup by nodename requires the proper storage nodename which we use
also in status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert all places in tests to use the 'storage' layer nodename
accessors instead of (virStorageSource)->nodestorage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a set of accessors, which return node names based on
semantics. This will allow to us to modify how we setup the backing
chain in cases when e.g. the format driver can be omitted, without
breaking all the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuBlockStorageSourceGetFormatProps as it formats the properties of
the 'format' driver in qemu. Adjust the comment which was hinting
otherwise.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Restructure the conditions so that we can use virJSONValueObjectAdd with
a clearer logic for backing store control.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the node name of the storage access driver to identify the block job
volumes. This will prepare the blockjob code for the possibility that the
format layer may be missing. Our lookup code can find either of them,
thus we can safely switch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'virt-aa-helper' process gets a XML of the VM it needs to create a
profile for. For a disk type='volume' this XML contained only the
pool and volume name.
The 'virt-aa-helper' needs a local path though for anything it needs to
label. This means that we'd either need to invoke connection to the
storage driver and re-resolve the volume. Alternative which makes more
sense is to pass the proper data in the XML already passed to it via the
new XML formatter and parser flags.
This was indirectly reported upstream in
https://gitlab.com/libvirt/libvirt/-/issues/546
The configuration in the issue above was created by Cockpit on Debian.
Since Cockpit is getting more popular it's more likely that users will
be impacted by this problem.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Re-translating the disk source pools when reconnecting to a VM makes no
sense as the volume might have changed or pool became inactive. The VM
still uses the original volume though. Failing to re-translate the pool
also causes the VM to be killed.
Fix this by storing the original translation in the status XML.
Resolves: https://issues.redhat.com/browse/RHEL-7345
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Enable the flags in the status xml2xmtest and add an exaple to the test
data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Re-translating a disk type='volume' definition from a storage pool is
not a good idea in cases when the volume might have changed or we might
not have access to the storage driver.
Specific cases are if a storage pool is not activated on daemon restart,
then re-connecting to a VM fails, or if the virt-aa-helper program tries
to setup labelling for apparmor.
Add a new flag which will preserve the translated data in the
definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a disk definition was already translated re-doing it makes no sense.
Skip the translation if the 'actualtype' is already populated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Register autoptr cleanup function for virStorageSourcePoolDef and
refactor the parser to simplify the logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use proper enum type and refactor the formatter accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When loading a secret value fails, the control jumps over to the
'cleanup' label where explicit call to virSecretDefFree()
happens. This is unnecessary as the corresponding variable can be
declared with g_autoptr() after which all error paths can just
return NULL instantly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When loading virSecret configs, the @path variable holds path to
individual config files. In each iteration it is freed explicitly
using VIR_FREE(). Switch it to g_autofree and remove those
explicit calls.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanup the virBuildPathInternal() function is no
longer used. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our virBuildPath() constructs a path from given arguments.
Exactly like g_build_filename(), except the latter is more
generic as it uses backslashes on Windows. Therefore, replace the
former with the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In my recent commit of v9.8.0-rc1~7 I've introduced validation
wrt other memory devices. And mostly works, except when doing
memory device update ('virsh update-memory-device') because then
@mem is just parsed <memory/> device XML and thus its pointer is
not in the vm->def->mem, yet. Thus my algorithm which skips over
the same entry fails. Fortunately, we require full device XML on
device update and thus we can use device address and aliases to
detect duplicity.
Fixes: 3fd64fb0e2
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While qemu is still reporting the 'device' field in the tray even the
code was not ready for the possibility of it missing. Fix the condition
for clearing 'devAlias' if qemu doesn't report the 'device' field.
Signed-off-by: Sergey Mironov <mironov@fintech.ru>
Ever since commit 6e9bd600d7 added a new
GitLab job description function handling the integration test suite
process to ci/jobs.sh it should be mentioned in the docs.
This patch splits the 'Run TCK' section in two, giving user the option
to run the integration test suite in their VM environment the same way
as we do in GitLab CI or execute everything manually.
This patch takes the opportunity to also link to the virtiofs kbase
article to give users a different option to get the local libvirt
repositories to be used in testing inside a VM.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It's mentioned in an earlier paragraph that Perl bindings in correct
version are needed, but there's no note about libvirt even though it
should be obvious. So make a clear note on that and while at it, do
mention the possibility to get upstream libvirt RPMs from GitLab CI
artifacts if users don't feel like building everything on their own.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The fact that we need ci/helper script to run the workloads remains
true, but the invocation has changed as of commit
eb41e45630 . We also extracted GitLab job
specs into a standalone ci/jobs.sh script which allows execution of any
container job we run in upstream CI locally, unlike the original
functionality which only allowed builds, tests and shell (although
important to say it could be adjusted with the right meson/ninja args).
lcitool also became mandatory as it enables the container execution
which replaced a Makefile we used to have for this purpose.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
While wording is still correct to this day, we have already added more
features to lcitool and documented it properly in its repo. Make sure
that we refer the users to lcitool's doc material for further details
on how VMs can be installed locally.
Use the opportunity to bump the OS distro target from Fedora 36 -> 38.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
While we may have needed to run TCK through Avocado by explicitly using
the '--tap' option (still possible), we can get a nice output from
Avocado by default leaving the option out which is exactly what we do
inside GitLab CI environment.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This patch mainly fixes an unfinished sentence that was supposed to
describe the LIBVIRT_CI_INTEGRATION_RUNNER_TAG variable, but took the
opportunity to update the description of the other variable too.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The documented process should be updated to reflect the new process
once GitLab transitions to it completely and drops the old process
involving registration tokens as hinted by the note.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Comparison "if (ret == -1)" is always false.
This statement was forgotten during switching to g_new0()
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0275b06a55 ("util: command: use g_new0")
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Now that deleting and reverting external snapshots is implemented we can
report that in capabilities so management applications can use that
information and start using external snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Original code assumed that the memory state file is only migration
stream but it has additional metadata stored by libvirt. To correctly
load the memory state file we need to reuse code that is used when
restoring domain from saved image.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We need to skip all disks that have snapshot type other than 'external'.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When used with internal snapshots there is no memory state file so we
have no data to load and decompression is not needed.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When called from snapshot code we will need to pass snapshot object in
order to make internal snapshots work correctly.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When called by snapshot code we will need to use different reason.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The function will no longer be used only when restoring VM as it will
be used when reverting snapshot as well so move it to qemu_process
and rename it accordingly.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These new helpers separates the code from the logic used to start new
QEMU process with memory state and will make it easier to move
qemuSaveImageStartProcess() into qemu_process.c file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Part of qemuSaveImageStartVM() function will be used when reverting
external snapshots. To avoid duplicating code and logic extract the
shared bits into separate function.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently, nbdkit support will automatically be enabled as long as
the pidfd_open(2) syscall is available. Optionally, libnbd is used
to generate more user-friendly error messages.
In theory this is all good, since use of nbdkit is supposed to be
transparent to the user. In practice, however, there is a problem:
if support for it is enabled at build time and the necessary
runtime components are installed, nbdkit will always be preferred,
with no way for the user to opt out.
This will arguably be fine in the long run, but right now none of
the platforms that we target ships with a SELinux policy that
allows libvirt to launch nbdkit, and the AppArmor policy that we
maintain ourselves hasn't been updated either.
So, in practice, as of today having nbdkit installed on the host
makes network disks completely unusable unless you're willing to
compromise the overall security of the system by disabling
SELinux/AppArmor.
In order to make the transition smoother, provide a convenient
way for users and distro packagers to disable nbdkit support at
compile time until SELinux and AppArmor are ready.
In the process, detection is completely overhauled. libnbd is
made mandatory when nbdkit support is enabled, since availability
across operating systems is comparable and offering users the
option to make error messages worse doesn't make a lot of sense;
we also make sure that an explicit request from the user to
enable/disable nbdkit support is either complied with, or results
in a build failure when that's not possible. Last but not least,
we avoid linking against libnbd when nbdkit support is disabled.
At the RPM level, we disable the feature when building against
anything older than Fedora 40, which still doesn't have the
necessary SELinux bits but will hopefully gain them by the time
it's released. We also allow nbdkit support to be disabled at
build time the same way as other optional features, that is, by
passing "--define '_without_nbdkit 1'" to rpmbuild. Finally, if
nbdkit support has been disabled, installing libvirt will no
longer drag it in as a (weak) dependency.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Wrap the macro body in a new block and move the declaration of 'tmp'
into it, to avoid the need to mix g_autofree with manual freeing.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The function returns how many array items were filled in, but virsh
never checked for anything other than errors. Just to make sure this
does not report invalid data, even though the only possibility would be
reporting 0 free pages, check the returned data so that possible errors
are detected.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
(cherry picked from commit c35ba64d18235bfe35617cb3d6d6cc778f6d166d)
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function is supposed to return the number of items filled into the
array and not zero. Also change the initialization of the "randomness"
to be based on the startCell so that the values are different for each
cell even for separate calls.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 208569b07b6479e0acd05c5a7e1978b0b641e188)
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virProcessKillPainfullyDelay() currently almost always returns 1 or -1,
even though the documentation indicates that it should return 0 if the
process was terminated gracefully. But the computation of the return
code is faulty and the only case where it currently returns 0 is when it
is called with the pid of a process that does not exist.
Since no callers ever even distinguish between the 0 and 1 response
codes, simply get rid of the distinction and return 0 for both cases.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Like the Description, these are intended to be displayed to the
user, so it makes sense to have them towards the top of the file
before all the information that systemd will parse to calculate
dependencies.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Hypervisors are referred to by their user-facing name rather
than the name of their libvirt driver, the monolithic daemon is
explicitly referred to as legacy, and a consistent format is
used throughout.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
